Menu not looping and titles not showing up
Hello,
I made some dvd\s which looked good before i send them to the guy who duplicates them for me and he noticed
some issues i cannot figure out.
If i could get some help or directions that would be great.
i have included screen shots below the questions.
I set the main menu to loop forever but it is only playing 1 time and then going black on some players
or going back to the beginning FBI warning. On the flowchart it is set to go back to the main menu?
Not sure why this is happening?
When my duplicator plugs it into his machine it only says title 1...title 2 etc and it is not picking up the actual title
is this normal ( i see it on other DVD\s i have watched) or is there a way to say what the title really is?
Is it worth doing it?
Thanks,
Soshman
Hello Ann and Stan!
Thanks for your reply's!
Even thought they are not proper players ( WMP and VLC ) they are what people use to play DVD's
in their computers so it has to work similar to other DVD's IMHO.
Stan the bottom two videos are part of Menu #1 but after the link that goes to menu 2
the 4th video when clicked on islinked to menu 2 because the 8 videos on menu 2 are to be watch
after video 3 on the main menu and before the 5th video and the playall playlist at the very bottom....whew! ( hopefully the next one is much more linear:-)
I finally got ahold of my old editor and he figured it out for me. I had to put "Stop" after each menu for it to loop "forever"
Once i did that they worked properly on both computers and the DVD player.
Lots of google search and talking to folks and it seem like WMP has nobody who understands how to get the titles on the DVD to show up on WMP.
I have watched many DVD's and listened to many audios without that information showing up...so i am sure others have figured a way around it and i will have to settle on it as is!
Thanks again for all your help it is well appreciated:-)
Mark
Similar Messages
-
My iPod shuffle ( 1st or 2nd generation) will not recharge and does not show when the doc is connected to my MacBook Pro. I'm running the latest updated version of iTunes.
Hello Jane Benstock,
Thank you for using Apple Support Communities
It sounds like the next best step to take would be to reset the iPod Shuffle.
Check out this article named Resetting iPod shuffle found here http://support.apple.com/kb/HT1655.
All the best,
Sterling -
Ipad frozen in off/on loop and will not reboot
ipad frozen in off/on loop and will not reboot, tried accessing itunes but needs my code on the ipad which is frozen
I Found a solution:
this requires itunes, first plug the charger cable into the computer, then hold the home button on the iPad and plug the cable into the iPad, you should see the iTunes logo on the iPad. You will then receive prompts to restore. This assumes you backed up the device to iCloud prior to the problem. -
Is not abstract and does not override abstract method actionPerformed
I dont how to corr. Please help!! and thank you very much!!
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class test extends JFrame implements ActionListener, ItemListener
private CenterPanel centerPanel;
private QuestionPanel questionPanel;
private ButtonPanel buttonPanel;
private ResponsePanel responsePanel;
private JButton b1,b2,b3,b4,b5; //Create five references to Jbutton instances
private JTextField t1,t2,t3,t4,t5; //Create five references to JTextField instances
private JLabel label1; //Create one references to JLabel instances
private JRadioButton q1,q2,q3; //Create three references to JRadioButton instances
private ButtonGroup radioGroup; //Create one references to Button Group instances
private int que1[] = new int[5]; //Create int[4] Array
private int que2[] = new int[5];
private int que3[] = new int[5];
private String temp1, temp2, temp3, temp4, temp5, temp6, temp7, temp8, temp9, temp10,
temp11, temp12, temp13, temp14, temp15;
public test (String header)
super(header);
Container container = getContentPane();
label1 = new JLabel ("PLease click on your response to ");
q1 = new JRadioButton("I understand most of the content of this subject",true);
add(q1);
q2 = new JRadioButton("I see the relevance of the subject to my degree",false);
add(q2);
q3 = new JRadioButton("The workload in this subject is appropriate",false);
add(q3);
radioGroup = new ButtonGroup(); //JRadioButton belong to ButtonGroup
radioGroup.add(q1);
radioGroup.add(q2);
radioGroup.add(q3);
JPanel buttonPanel = new JPanel();
JPanel responsePanel = new JPanel();
JPanel questionPanel = new JPanel();
JPanel centerPanel = new JPanel();
b1 = new JButton ("Strongly DISAGREE"); //Instantiate JButton with text
b1.addActionListener (this); //Register JButtons to receive events
b2 = new JButton ("DISAGREE");
b2.addActionListener (this);
b3 = new JButton ("Neither AGREE or DISAGREE");
b3.addActionListener (this);
b4 = new JButton ("AGREE");
b4.addActionListener (this);
b5 = new JButton ("Strongly AGREE");
b5.addActionListener (this);
buttonPanel.setLayout(new GridLayout(5,1));
buttonPanel.add(b1);
buttonPanel.add(b2);
buttonPanel.add(b3);
buttonPanel.add(b4);
buttonPanel.add(b5);
t1 = new JTextField ("0",3); //JTextField contains empty string
t2 = new JTextField ("0",3);
t3 = new JTextField ("0",3);
t4 = new JTextField ("0",3);
t5 = new JTextField ("0",3);
t1.setEditable( false );
t2.setEditable( false );
t3.setEditable( false );
t4.setEditable( false );
t5.setEditable( false );
responsePanel.setLayout(new GridLayout(5,1));
responsePanel.add(t1);
responsePanel.add(t2);
responsePanel.add(t3);
responsePanel.add(t4);
responsePanel.add(t5);
questionPanel.setLayout(new GridLayout(4,1));
questionPanel.add(label1);
questionPanel.add(q1);
questionPanel.add(q2);
questionPanel.add(q3);
centerPanel.add(buttonPanel,BorderLayout.CENTER);
centerPanel.add(responsePanel,BorderLayout.EAST);
container.add(centerPanel,BorderLayout.WEST);
container.add(questionPanel,BorderLayout.NORTH);
q1.addActionListener(
new ActionListener(){
public void actionPerformed( ActionEvent e )
{ //actionPerformed of all registered listeners
if (e.getSource() == b1) {
que1[0] = Integer.parseInt(t1.getText()) + 1;
String temp1 = String.valueOf(que1[0]);
t1.setText(temp1);
else if (e.getSource() == b2) {
que1[1] = Integer.parseInt(t2.getText()) + 1;
String temp2 = String.valueOf(que1[1]);
t2.setText(temp2);
else if (e.getSource() == b3) {
que1[2] = Integer.parseInt(t3.getText()) + 1;
String temp3 = String.valueOf(que1[2]);
t3.setText(temp3);
else if (e.getSource() == b4) {
que1[3] = Integer.parseInt(t4.getText()) + 1;
String temp4 = String.valueOf(que1[3]);
t4.setText(temp4);
else if (e.getSource() == b5) {
que1[4] = Integer.parseInt(t5.getText()) + 1;
String temp5 = String.valueOf(que1[4]);
t5.setText(temp5);
} //end action performed
q2.addActionListener(
new ActionListener(){
public void actionPerformed( ActionEvent e )
{ //actionPerformed of all registered listeners
if (e.getSource() == b1) {
que2[0] = Integer.parseInt(t1.getText()) + 1;
String temp6 = String.valueOf(que2[0]);
t1.setText(temp1);
else if (e.getSource() == b2) {
que2[1] = Integer.parseInt(t2.getText()) + 1;
String temp7 = String.valueOf(que2[1]);
t2.setText(temp7);
else if (e.getSource() == b3) {
que2[2] = Integer.parseInt(t3.getText()) + 1;
String temp8 = String.valueOf(que2[2]);
t3.setText(temp8);
else if (e.getSource() == b4) {
que2[3] = Integer.parseInt(t4.getText()) + 1;
String temp9 = String.valueOf(que2[3]);
t4.setText(temp9);
else if (e.getSource() == b5) {
que2[4] = Integer.parseInt(t5.getText()) + 1;
String temp10 = String.valueOf(que2[4]);
t5.setText(temp10);
} //end action performed
q3.addActionListener(
new ActionListener(){
public void actionPerformed( ActionEvent e )
{ //actionPerformed of all registered listeners
if (e.getSource() == b1) {
que3[0] = Integer.parseInt(t1.getText()) + 1;
String temp11 = String.valueOf(que3[0]);
t1.setText(temp11);
else if (e.getSource() == b2) {
que3[1] = Integer.parseInt(t2.getText()) + 1;
String temp12 = String.valueOf(que3[1]);
t2.setText(temp12);
else if (e.getSource() == b3) {
que3[2] = Integer.parseInt(t3.getText()) + 1;
String temp13 = String.valueOf(que3[2]);
t3.setText(temp13);
else if (e.getSource() == b4) {
que3[3] = Integer.parseInt(t4.getText()) + 1;
String temp14 = String.valueOf(que3[3]);
t4.setText(temp14);
else if (e.getSource() == b5) {
que3[4] = Integer.parseInt(t5.getText()) + 1;
String temp15 = String.valueOf(que3[4]);
t5.setText(temp15);
} //end action performed
}//end constructor test
public void itemStateChanged(ItemEvent item) {
//int state = item.getStateChange();
//if (q1 == item.SELECTED)
public class ButtonPanel extends JPanel
public ButtonPanel()
public class CenterPanel extends JPanel
public CenterPanel()
public class QuestionPanel extends JPanel
public QuestionPanel()
public class ResponsePanel extends JPanel
public ResponsePanel()
public static void main(String [] args)
test surveyFrame = new test("Student Survey") ;
surveyFrame.setSize( 500,300 );
surveyFrame.setVisible(true);
surveyFrame.setDefaultCloseOperation (JFrame.EXIT_ON_CLOSE);
}//end main
}//end class testis not abstract and does not override abstract method actionPerformed
Oh, I see that the title of your post is an error message? Ok. Well, the test class is declared as implementing an ActionListener. That means the test class must have an actionPerformed() method. Your test class apparently does not.
It does not appear that the test class needs to implement ActionListener. You are using annonymous classes as listeners. -
IPHONE 6 This cable or accessory is not certified and may not work reliably
I have the IPhone 6. Bought it last Saturday,Just updated it to the newest 8.0.2 software Friday Sept 26th. No Problems until today, Monday Sept. 29th when Im getting this error .
It started this afternoon and, no i did not and do not have it plugged in. It was charged this morning and was at 57% battery this afternoon when the problem started.
Now I get this messege that keeps poping up over and over "This cable or accessory is not certified and may not work reliably with this iphone"
It keeps popping up and i dont have ANYTHING plugged into it.
I called Verizon because thats who i bought it from who put me thru second line for help.
After a bunch of BS and telling me that they have had problems with chargers because of the amplified voltage and wrong plug being sent out which sounds like bull to me because he said the new iphones have a different head on the plug, not the phone side but the end that has the usb connection and goes to the ac outlet, which dont make a lot of sense when you can also plug them into a usb port. I looked at different iphone plugs from the 4s, the 5 and the 6,and they all show the same input and output voltages and amps. Basically nothing that has to do with my problem i am having
Anyway at this point now they are saying something may have happened with the new software when i download it last friday.
So now they had me backup my phone to itunes, and restore the iphone from itunes.
When you do this, itunes will automatically download the new version software, which seems to be taking a long time to download.
I will try to post results later to see if this works......I am having the exact same problem you are, straight out of the box. Got an iphone6+ this morning and five minutes after I turned it on, it started coming up with the same error as you.
The phone was on ios 8 (not 8.02). I did the upgrade to 8.02 but it still comes up. I'd be very surprised if this is a software problem. I didn't even get to charge it or plug anything in !! Started doing it straight away.
The error comes up even when I have NOTHING plugged it to the phone.
I am very annoyed!!!
If possible could you please let us know what the Apple Tech people say.
thx
David -
The URL is not valid and can not be loaded in excite home page
Windows 7 64bit. New HP computer. I loaded firefox and use excite as my homepage. When excite comes up the page loads and about 7 or 8 seconds later a pop up appears with "The URL is not valid and can not be loaded" on it. I can't figure out what URL is not valid. It does it every time I refresh or come back to the homepage. It just did it again as I type this.
Can anyone help?* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] -
HT5958 Existing projects will not update and are not available for Final Cut Pro 10.1.1?
I have updated to Final Cut 10.1.1 but existing projects from previous version will not update and are not available. Have tried to re-install Final Cut as well as bring the projects to another computer which has the update, but they still will not update. Has anyone else encountered this problem and is there anyone who can assist?
In the Finder take a look at the path where your old projects and events are stored. They should be in Final Cut Projects and Final Cut Events folders respectively. Those folders need to be in Users/user/Movies on the boot drive and/or at the root level of other drives for FCPX to see them.
If that's indeed the case, then you should be able to get them updated ny using the Update Projects and Events command form the File menu and then clicking on Locate.
Russ -
If I click on an e-mail address link in a web page instead of a blank message opening I always get a pop up screen with a log-in for googlemail. I do not have and do not want a googlemail account. I just want to be able to send e-mails using Outlook.
OUtlook was already set as the mail client for FF, and is my operating system (XP)'s default mail programme. therefore problem not solved at all. what I get whenever I follow a link in a webpage to send an e-mail is a little pop up window asking me to sign in to gmail or open an account. any other suggestions?
-
Is not abstract and does not override abstract method tablechanged
I will remove all the gui code to make it shorter, but my problem lies with my InteractiveTableModelListener.
public class Meet extends JPanel{
private static void createAndShowGUI() {
JFrame frame = new JFrame("MEET_dataTable");
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.add(new Meet(), BorderLayout.CENTER);
frame.pack();
frame.setVisible(true);
public class InteractiveTableModelListener implements TableModelListener {
public void TableChanged(TableModelEvent evt) {
if (evt.getType() == TableModelEvent.UPDATE) {
int column = evt.getColumn();
int row = evt.getFirstRow();
dataTable.setColumnSelectionInterval(column + 1, column + 1);
dataTable.setRowSelectionInterval(row, row);
class InteractiveRenderer extends DefaultTableCellRenderer {
protected int interactiveColumn;
public InteractiveRenderer(int interactiveColumn) {
this.interactiveColumn = interactiveColumn;
public Component getTableCellRendererComponent(JTable dataTable,
Object value, boolean isSelected, boolean hasFocus, int row,
int column)
Component c = super.getTableCellRendererComponent(dataTable, value, isSelected, hasFocus, row, column);
if (column == interactiveColumn && hasFocus) {
if ((Meet.this.tableModel.getRowCount() - 1) == row &&
!Meet.this.tableModel.hasEmptyRow())
Meet.this.tableModel.addEmptyRow();
highlightLastRow(row);
return c;
public void highlightLastRow(int row) {
int lastrow = tableModel.getRowCount();
if (row == lastrow - 1) {
dataTable.setRowSelectionInterval(lastrow - 1, lastrow - 1);
else {
dataTable.setRowSelectionInterval(row + 1, row + 1);
dataTable.setColumnSelectionInterval(0, 0);
public static void main(String[] args) {
SwingUtilities.invokeLater(new Runnable() {
public void run() {
UIManager.put("swing.boldMetal", Boolean.FALSE);
createAndShowGUI();
}As i say, i have removed all the gui code to make it shorter, but in this code i create the table and add all the model to it. I am being returned with the error
Meet.InteractiveTableModelListener is not abstract and does not override abstract method tableChanged(javax.swing.event.TableModelEvent)in javax.swing.event.TableModelListener
what would be causing this error?
CheersSorry, just figured out my silly error, the method is tableChanged not TableChanged.
cheers
TOPIC CLOSED
Edited by: nick2price on Sep 11, 2008 7:08 AM -
Is not abstract and does not override abstract method ERROR
Hello. I'm new at all this, and am attempting to recreate a sample code out of my book (Teach Yourself XML in 24 Hours), and I keep getting an error. I appriciate any help.
This is the Error that I get:
DocumentPrinter is not abstract and does not override abstract method skippedEntity(java.lang.String) in org.xml.sax.ContentHandler
public class DocumentPrinter implements ContentHandler, ErrorHandler
^This is the sourcecode:
import org.xml.sax.Attributes;
import org.xml.sax.ContentHandler;
import org.xml.sax.ErrorHandler;
import org.xml.sax.Locator;
import org.xml.sax.SAXParseException;
import org.xml.sax.XMLReader;
public class DocumentPrinter implements ContentHandler, ErrorHandler
// A Constant containing the name of the SAX parser to use.
private static final String PARSER_NAME = "org.apache.xerces.parsers.SAXParser";
public static void main(String[] args)
// Check to see whether the user supplied any command line arguments. If not, print an error and exit.
if (args.length == 0)
System.out.println("No XML document path specified.");
System.exit(1);
// Create a new instance of the DocumentPrinter class.
DocumentPrinter dp = new DocumentPrinter();
try
// Create a new instance of the XML Parser.
XMLReader parser = (XMLReader)Class.forName(PARSER_NAME).newInstance();
// Set the parser's content handler
// parser.setContentHandler(dp);
// Set the parsers error handler
parser.setErrorHandler(dp);
// Parse the file named in the argument
parser.parse(args[0]);
catch (Exception ex)
System.out.println(ex.getMessage());
ex.printStackTrace();
public void characters(char[] ch, int start, int length)
String chars ="";
for (int i = start; i < start + length; i++)
chars = chars + ch;
System.out.println("Recieved characters: " + chars);
public void startDocument()
System.out.println("Start Document.");
public void endDocument()
System.out.println("End of Document.");
public void startElement(String namespaceURI, String localName, String qName, Attributes atts)
System.out.println("Start element: " + localName);
for (int i = 0; i < atts.getLength(); i++)
System.out.println(" Attribute: " + atts.getLocalName(i));
System.out.println(" Value: " + atts.getValue(i));
public void endElement(String namespaceURI, String localName, String qName)
System.out.println("End of element: " + localName);
public void startPrefixMapping(String prefix, String uri)
System.out.println("Prefix mapping: " + prefix);
System.out.println("URI: " + uri);
public void endPrefixMapping(String prefix)
System.out.println("End of prefix mapping: " + prefix);
public void ignorableWhitespace(char[] ch, int start, int length)
System.out.println("Recieved whitespace.");
public void processingInstruction(String target, String data)
System.out.println("Recieved processing instruction:");
System.out.println("Target: " + target);
System.out.println("Data: " + data);
public void setDocumentLocation(Locator locator)
// Nada
public void error(SAXParseException exception)
System.out.println("Parsing error on line " + exception.getLineNumber());
public void fatalError(SAXParseException exception)
System.out.println("Fatal parsing error on line " + exception.getLineNumber());
public void warning(SAXParseException exception)
System.out.println("Warning on line " + exception.getLineNumber());Check to make sure that the arguments are consistent with your ContentHandler class. Probably the wrong type.
I think you forgot to include the skippedEntity method, it seems to be missing. Even if an implemented class has a method that you are not using, you still have to include the method in your code even if it doesn't do anything.
Message was edited by:
ChargersTule1 -
...is not abstract and does not override abstract method compare
Why am I getting the above compile error when I am very clearly overriding abstract method compare (ditto abstract method compareTo)? Here is my code -- which was presented 1.5 code and I'm trying to retrofit to 1.4 -- followed by the complete compile time error. Thanks in advance for your help (even though I'm sure this is an easy question for you experts):
import java.util.*;
This program sorts a set of item by comparing
their descriptions.
public class TreeSetTest
public static void main(String[] args)
SortedSet parts = new TreeSet();
parts.add(new Item("Toaster", 1234));
parts.add(new Item("Widget", 4562));
parts.add(new Item("Modem", 9912));
System.out.println(parts);
SortedSet sortByDescription = new TreeSet(new
Comparator()
public int compare(Item a, Item b) // LINE CAUSING THE ERROR
String descrA = a.getDescription();
String descrB = b.getDescription();
return descrA.compareTo(descrB);
sortByDescription.addAll(parts);
System.out.println(sortByDescription);
An item with a description and a part number.
class Item implements Comparable
Constructs an item.
@param aDescription the item's description
@param aPartNumber the item's part number
public Item(String aDescription, int aPartNumber)
description = aDescription;
partNumber = aPartNumber;
Gets the description of this item.
@return the description
public String getDescription()
return description;
public String toString()
return "[descripion=" + description
+ ", partNumber=" + partNumber + "]";
public boolean equals(Object otherObject)
if (this == otherObject) return true;
if (otherObject == null) return false;
if (getClass() != otherObject.getClass()) return false;
Item other = (Item) otherObject;
return description.equals(other.description)
&& partNumber == other.partNumber;
public int hashCode()
return 13 * description.hashCode() + 17 * partNumber;
public int compareTo(Item other) // OTHER LINE CAUSING THE ERROR
return partNumber - other.partNumber;
private String description;
private int partNumber;
}Compiler error:
TreeSetTest.java:25: <anonymous TreeSetTest$1> is not abstract and does not over
ride abstract method compare(java.lang.Object,java.lang.Object) in java.util.Com
parator
public int compare(Item a, Item b)
^
TreeSetTest.java:41: Item is not abstract and does not override abstract method
compareTo(java.lang.Object) in java.lang.Comparable
class Item implements Comparable
^
2 errorsAccording to the book I'm reading, if you merely take
out the generic from the code, it should compile and
run in v1.4 (assuming, of course, that the class
exists in 1.4). I don't know what book you are reading but that's certainly incorrect or incomplete at least. I've manually retrofitted code to 1.4, and you'll be inserting casts as well as replacing type references with Object (or the erased type, to be more precise).
These interfaces do exist in 1.4, and
without the generics.Exactly. Which means compareTo takes an Object, and you should change your overriding method accordingly.
But this raises a new question: how does my 1.4
compiler know anything about generics? It doesn't and it can't. As the compiler is telling you, those interfaces expect Object. Think about it, you want to implement one interface which declares a method argument type of Object, in several classes, each with a different type. Obviously all of those are not valid overrides. -
Firefox is not opening and is NOT present in task manager
With no apparent reason FF is not opening and is not present in Win Task Manager. I tried to reinstal, reset registry and other common solutions but none of them changed anything. After doubleclick on an icon nothing happens... and thats all.
For some reason it is ok now after I've installed FF 3.0.6 and then made an update to 3.6.
-
Product is not abstract and does not override abstract method
Received the following errors.
Product.java:3: Product is not abstract and does not override abstract method ge
tDisplayText() in Displayable
public class Product implements Displayable
^
Product.java:16: getDisplayText() in Product cannot implement getDisplayText() i
n Displayable; attempting to use incompatible return type
found : void
required: java.lang.String
public void getDisplayText()
^
2 errors
Code reads as follows
import java.text.NumberFormat;
public class Product implements Displayable
private String code;
private String description;
private double price;
public Product()
this.code = "";
this.description = "";
this.price = 0;
public void getDisplayText()
String message =
"Code: " + code + "\n" +
"Description: " + description + "\n" +
"Price: " + this.getFormattedPrice() + "\n";
public Product(String code, String description, double price)
this.code = code;
this.description = description;
this.price = price;
public void setCode(String code)
this.code = code;
public String getCode(){
return code;
public void setDescription(String description)
this.description = description;
public String getDescription()
return description;
public void setPrice(double price)
this.price = price;
public double getPrice()
return price;
public String getFormattedPrice()
NumberFormat currency = NumberFormat.getCurrencyInstance();
return currency.format(price);
Please help!Received the following errors.
Product.java:3: Product is not abstract and does not
override abstract method ge
tDisplayText() in Displayable
public class Product implements Displayable
^
Product.java:16: getDisplayText() in Product cannot
implement getDisplayText() i
n Displayable; attempting to use incompatible return
type
found : void
required: java.lang.String
public void getDisplayText()
^
2 errors
Code reads as follows
Please use the code tags when posting code. There is a code button right above the text box where you enter your post. Click on it and put the code between the code tags.
These error messages are quite clear in telling what is wrong. You have an Interface called Displayable that specifies a method something like thispublic String getDisplayText() {But in your Product source code, you created thismethodpublic void getDisplayText() {The compiler is complaining because the methods are not the same.
You also need to return a String in the method probalby like thisreturn message; -
my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
thanks!The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.
-
My mail will not open and will not let me quit it. Help?
My mail will not open and will not let me quit it. Ive tried to restart my computer but it wont let me do that because it says the Mail has canceled the restart. It does the same thing when I try to shut it down. Can someone help?
Welcome to Apple Support Communities
Press Alt, Command and Esc keys, select Mail and force close it. Finally, restart or turn off your computer
Maybe you are looking for
-
How can I use iCloud again after upgrading OS to Mountain Lion? 2 days of trying every password I have ever used, AND changing Apple ID and iTunes ID, still nothing. Can't backup on iCloud anymore.
-
Adobe OnLocation connection to mobile phone by wi-fi?
Hi, I have Samsung S8500 wave II mobile phone. Can I connect my mobile phone by wi-fi or other connecting method to my notebook and shoot video by Adobe OnLocation CS5? Sorry for my english. Thank You!
-
HT201173 how come my screen is green tinted?
how come my screen is green tinted?
-
1. Is there a way to change the audio icon in a slide? I don't like the megaphone-like picture. I'd like to change it to a pic better suiting my topic. It is possible on PC, so there must be a way to do it on Mac. 2. Is there a way to insert not a wh
-
We still have numerous W98 machines and most are on Client 3.4SP2. But it appears from Novell's site, we should be using v3.32? Is 3.4 no longer the recommended version? Wondering what the issue is. Thanks! Susanne