Menu not visible on ibook G4?!

We i burn a disc (using DVDSP) it plays on my machine (powerpc G5) and most other machine with the exception of ibook G4s (does work on G3s). when trying to play on ibook G4 the menu is black (not visible) but i can mouse over where the button should be, cursor changes to click pointer, i click and the video plays (with no problems) but only due to the fact that i know the button is there!. Ive had suggestions to change audio format to ac3 which i did (and no change).
DVD is SD single sided with bitrate of about 5.5 mbps and audio converted to AC3. video is about 5mins long.
I have had this very same problem with every DVD i have created since begining to use DVDSP 3 months ago
PLEASE HELP I HAVE A MAJOR DVD PROJECT DUE NEXT MONTH!
PowerPC G5 Mac OS X (10.4.8)

Sounds like you have this issue
http://discussions.apple.com/thread.jspa?messageID=3049731&#3049731
Workaround is to make it a motion menu (even a still with looping) that seems to work

Similar Messages

5th Gen 30 GB iPod - screen has lines - menu not visible

Sometimes the menu is visible - sometimes not. I have never dropped it, the glass is intact. Just by clicking buttons I can play some music - just don't know what is going to play. I have had it for many years, and though I have an iPhone and iPad - I still love my iPod for walking, etc. Any suggestions that might help? (besides a new one). Can the inner screen be replaced? I have just reset & restored it to see if that might help - through iTunes.

You can work through the remaining five 5 R's of troubleshooting.
http://www.apple.com/support/ipod/five_rs/
It might also be a good idea to let the iPod's battery fully drain. Then charge it back up and restore it once more in iTunes.
Otherwise, it's likely a hardware issue with the iPod's LCD display, meaning you'll need to take or send your iPod in for service either via Apple or a third party repair service. Here is Apple's repair pricing.
http://www.apple.com/support/ipod/service/prices/
Note that they don't actually repair the device, but exchange it for one of the same generation, model, and capacity. A third party service will actually replace the damaged/faulty part for a little less. Google "iPod screen repair" and you should get a number of results to work with.
B-rock

Japanese input Kotoeri Maverick Register Word menu not visible

Hi,
I would like to add words to Kotoeri japanese dictionnary, but the menu Flag/Register word is not visible, I tried alt but on succès
Any idea?
Best regards

Ok So I asked on the Japanese Fourms and this is the answer I got back. To be honest I had tried this on my work computer before and it did not work but it is working on my home computer so maybe this will help you.
Mavericks (OS 10.9)ではことえりのユーザ辞書の仕様が変わりました。
The way you do this action has changed with the change to Maveriks.
1）まず、ことえり入力メソッドを追加する必要があります。
Make sure that you have added the Kotoeri Method (I think you have)
→　Add the Kotoeri input method
2）既に追加済みであれば、こちらのヘルプをご確認下さい。
Next use the below link to help you add words to your dictionary.
→　Add words and symbols to a user dictionary
Pretty much you add things to your dictionary like you would add shortcut word like (R) becomes ®.
1. While using Kotoeri, choose Edit Text Substitutions from the Input menu (looks like a flag or character) in the menu bar.
2. In the text pane of Keyboard preferences, click Add to add a word.
3. Type the hiragana reading of the word in the Replace field. Readings of registered words can be no longer than 32 characters. If you’re registering an adjective, make sure to enter the reading in its dictionary form. The ending must be 〜い (~i). For example, あたらしい (atarashii) or たかい (takai). If you’re registering an adverb, don’t include inflective endings, such as 〜な (-na) or 〜だ (-da).
4. Click the With column, then type the replacement word in the With field.A word can be no longer than 64 characters.
Hope this helps you out. I will have to wait until Tuesday to find out if it works on my work computer.
Happy Chinese New Year.

Outlook Integration menu not visible in Add-ons menu

Hi,
Outlook Integration doesn't work on one workstation after a recent upgrade to 8.81 PL05.
It's Windows 7 32-bit with Outlook 2010.
Add-on seems to be successfuly installed and it appears to be connected in Add-on Manager, however the Outlook Integration menu (Default Settings, Company Settings, Define Snapshot Templates) is not visible in SAP. User has full authorisation and the menu doesn't appear in Form Settings to make it visible.
After a while there is a message box saying that Outlook Integration has disconnected and it asks to reconnect Add-on, continue without the Add-on or log off company.
I tried to uninstall and re-install the add-on, but it made no difference.
Any suggestions?
Thank you!
Cristina

Hi,
I uninstalled and re-installed SAP Client on that workstation and Outlook Integration was successfully installed.
Cristina

Changes made to a pdf file (i.e. adding a text box) are not visible in iBooks but work OK in other programs like docs to go?

Anyone know why that is or how to correct it?

Thanks, Demo, I'll give that a shot. On the other hand, I really don't want to have some files in iBooks and other ones in Adobe Reader. If Adobe Reader will let me organize them in folders, it might be a great solution.
However, there's no ".pdf management" involved here. It's simply "Read the #%€\#^% .pdf file I gave you" and there is nothing to "manage". Whatever opinions Apple has about Adobe, .pdf is a fact of life and should not require any handstands and backsprings just to read a file. (Are you listening, Apple?) I refinanced my home with .pdf files; print it, sign it, scan it, e-mail it back. (OK, calm down, it'll be all right... Sigh...)
Whatever the result, I'll report back.
Thanks again.
Jeff B

Navigation Menu Not Visible

I just created a website through iweb. After I published it (FTP) the navigation menu suddenly did not show up at all on any of the web pages. All of the pages are there, but there are no borders around the pictures throughout the site, and on a photo album page, the photos wont show up. My hosting company is startlogic.com The site is www.southlandvet.com if you wanna check it out...The navigation is supposed to be at the top right part of the page. The photo page is www.southlandvet.com/Our_Pets.html
Any help would be greatly appreciated!

bwilliams1188 wrote:
Well, I published the site to a folder and published everything in that folder to the server and placed the scripts in a cgi-bin folder, which is what the hosting company told me to do. Is there another way?
Ok, new guess... All the links to the scripts get broken because of placing the scripts into another location... You shouldn't change the structure of the site you should leave it the way iWeb created it... +How could a page ever know where the files are it needs to load properly if they aren't where it was told by iWeb?+ I don't know why they suggested you to do so...
Try to upload it the way iWeb creates it without changing anything...
Regards,
Cédric

EFFECTS SUBCATEGORY DROP-DOWN MENU NOT VISIBLE

PSE 6 (MAC) THE EFFECTS PALETTE HAS A SUBCATEGORY DROP-DOWN MENU HAS DISAPPEARED AND I CANNOT GET IT BACK. PLEASE LET ME KNOW HOW TO GET IT BACK. I HAVE TRIED TO RESET THE PALETTE LOCATIONS AND IT REAPPEARS BUT WHEN I CLICK ON IT, IT IMMEDIATELY DISAPPEARS AGAIN.

Hello, Scott. Please don't shout. Quit PSE, then go to your hard drive>library>application support>adobe>Photoshop Elements>6.0>locale>en_US (this will be different if you aren't in the US) and delete mediaDatabase.db3.
Repair permissions and relaunch PSE. Give it time to rebuild the palettes before you start using the program.
Also, note that you have 3 library folders. You want the one at the top level of your hard drive, not system>library or your username>library.

Insider/FourthElephant extension context menu not visible?

I've deployed the extensions in the <sqldeveloper>/jdev/extensions dir, I see them listed in the extensions list, but I don't see any context menu related to the extension. I connect to a database, right click from the connections tab, and only see connect, disconnect, delete, sqlplus, refresh, properties, rename conn, open sql wksht, remote debug and gather stats. Am I doing something wrong?

not sure what this would have to do with it, but I downloaded the errors lookkup extension from fourth elephant and not I see the insider extension context menu option and it launches. very bizarre. the error lookup is working too.

Part of View menu not visible

Working with a newly installed version of Pages'08, I noticed that part of the view menu is ... well, not there. View ends with "Show Invisibles" and nothing further. Normally "Zoom..." and "Show Inspector" and a bunch of others should show up, but there is nothing there. Without having actually done a precise comparison (the two computers are pretty far apart...) the other menus seem OK.
Any ideas where this could come from, and how to remedy it?

It may be a problem of corrupt preferences. Go to HD > Users > (your account) > Library > Preferences & delete the com.apple.iwork.pages.plist & restart Pages. Deleting the preference file & forcing the application to build a new, clean file is a simple first step in troubleshooting a misbehaving application.

Reader XI Version 11.0.07 running on Windows XP SP2/3 -- can't split .pdf file ; Tools -- Pages menu not visible/available

Hi , Folks
My ( free ) download of Adobe Reader XI doesn't permit me to split a ( scanned ) .pdf file into two separate .pdf files , as I would like .
The on-line Help advises me to go into Tools --> Pages to do this .
But my Tools menu does not have Pages , within it .
Do I need to download an older ( free ) revision ; i.e., Adobe Reader X ?
Please advise ,
Peter

No, you need to purchase Acrobat to be able to do that. The free Reader can't perform such editing tasks.

My free iBook is not visible in iBooks

How come that I can't find my iBook in the iBook store after a succesful delivery according to iTunes Producer?

Depends on how many days it is now - since you delivered the book.
Have you checked your iTuned Connect account > Manage your Books? If not check it.. it will advise the current status of your book ie orange dot and In Review or green dot means its accepted and going into the store store or , it may have a Ticket and needs corrections.
If all is well, actually appearing in teh store depends on how busy the review team are and it could vary 3 - 14 days.
In the books store search for your name or what you use a author and the book title in its catagories.

Add-Ins menu not visible in Crystal report for Sap Business One

Hi,
I have installed the Crystal Report Design for Sap Business One on my customer server.
But when I open the Crystal Report I can't see the Add-Ins menu to put the rpt directly on my Sap Business One.
I have installed it on many customer, but only with this I have this type of problem.
There is some restriction on Sap Version/Patches or Authorization Users or some check that I have to set on Sap or on Crystal Report?
Regards
Marco

Hi All,
i have the same issue on crystal report add-ins. Have you able to solve this without upgrading our sap business one to the latest version or patch level? Please see details below.
OS: MS Windows 7 SP1
SAP Business One 8.82 pl7
Crystal report 2011
Crystal report integration package installed under B1_SHare/Client
But still the problem persist on the workstation.
Please help me solve this problem.
Thank you,
ana

IBooks Store Button Not Visible

The ibooks Store Button is not visible in iBooks... I tried fixing by repairing permissions, rebooting... still no store button! Checked Parental Controls but does not apply as I am the admin. user... I don't get it! I can do everything fine from iTunes Store. Using Mavericks 10.9.1 & iBooks 1.0.1.

See What I Mean????

About Me link is not visible in Welcome Menu if placed on custom location in Custom Master Page

Experts,
I am facing a problem in my -ongoing SP 2013 project's branding. The problem is with Welcome Menu. I need to put the welcome menu at a custom place rather than in ribbon area. for this I added welcome menu snippet inside my Master Page HTML but there is
a problem with it. On ribbon link "About Me" is visible while at the same time link "About me" is not visible on welcome menu which has been inserted on custom place. below images describe my problem more accurately.
I need help in this regard if some one can help me. For your information My User Profiles are properly configured and working.
HBkhan

Hi Haris,
I tested the same scenario in my environment, and the link will display My Settings link instead of About Me link when there is more than one welcome menu in the page.
If you want to put the welcome menu at a custom place rather than in ribbon area, I recommend you remove the welcome menu in the ribbon area(suitebar) after putting the other welcome menu at the custom place.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Photo gallery menu button not visible (black on bl...

Lately (I don't know when it changed because before it was not like this) there is some strange behavior on my N8 when viewing photos in the gallery.
If I chose a photo to view and then tap on screen to get the options I don't see the two buttons at the bottom of the screen (Options and Back buttons). I found out that the buttons are present but they are in black - meaning they are not visible if there is no picture covering those parts of the screen (see attached photos). They are only visible if the background is very bright (white).
Is there any settings to change this annoyance?
P.S. The same is true if I open pictures in Photo Editor.
Attachments:
P1050880.JPG ‏1634 KB
P1050881.JPG ‏2361 KB

Okay, I've tried .ac3 audio and I get the same result.
I had a friend of mine try this test. He had two different Progressive scan DVD players. It played perect on one and showed these errors on the other (the audio not playing and the text appearing in a different font). He said it had somthing to do with the progressive scan settings of the player. One player could switch to this type of DVD and the other one could only do it manually in the menu screen. He said that even hollywood DVDs do this on these types of DVD players. Since I have NEVER seen this problem before what could he be talking about? And why would previous versions of DVD's that I have made in DVD Studio Pro 1, 1.5 and 2 work fine on these same DVD players?
This is driving me nuts. Why would one DVD player play the DVD perfect and another one play the video fine, but mess up the audio and text buttons on the menu?
Other people I have talked to stay that it may be the media it is burned to, but I'm using the same DVD media that I have always used?
Please help!

Menu not visible on ibook G4?!

Similar Messages

Maybe you are looking for