Menu Not working right in Internet Expleror

Hello,
I just put my website I designed using muse onto the Internet, and it works great in Chrome, but when I use it in Internet Explorer, the menu is delayed when I hover over anything. It lags, and has to readjust where the image is located for the different animations.
Is there any way to fix this?
my website I am trying to fix can be found at
www.hilaryfullmer.com/design/zta

No discernible lag when I looked at it. Difficult to work out you problem unless you supply the version if IE your using.

Similar Messages

DVD Menu not working right in DVD Players

Hi All,
I'm hoping you can help me. I'm using a Windows machine. I've created a video in Premiere CS5, dynamic linked it to Encore CS5 and created a Main Menu (with a button to play the whole video and a button to the sub menu) and Sub Menu for scene selection (Containing 9 scene buttons and back button). It works fine with the simulation Remote control buttons on Encore's Preview test.
I have burnt the DVD and tested it in two DVD players one old and one new. The Main menu shows but I can't do anything else. It's animated but it pauses/freezes and them moves again, so it doesn't play smooth on either.
On one DVD player occasionally it looks like you can select the up and down button on the DVD remote control to select the two buttons, but nothing happens when you press the remote Play Button.
I've played it on my computer the menu selects fine with the mouse. The video however played for a few mins before it froze. But I'm not to concerned with the computer play. Just need it to work on DVD.
I have clicking on the 'Show Button Routing' button in the Menu viewing window and NONE of the buttons left, right, up or down are set to 0. So if I'm right in believing the remote should be able to navigate around all the buttons. However, I'm not sure whether the Auto Routing is ticked somewhere as I can't find it. My gut feeling is that this isn't the problem as the menu does not play smoothly and is freezing on and off like it's malfunctioning.
Any advice would be great. Many thanks,
Eve

Hi Stan,
Many thanks for the reply.
I always run in admin mode otherwise the DVD's don't burn at all.
The animated buttons are on the next screen, 'scene selections'. Which I can't get to.
The animations I was referring to are the swirls and film on the background they pause and freeze for a few seconds then play again as if the DVD is not being read properly.
How would I turn off animated buttons anyway?
Nothing happens with I press the Play button either so I can't go straight into the film.
Thanks,
Eve

Safari 5.1.2 Not working right after install

Hi, after installing the update for Snow Leopard safari is not working right. Some pages don't load, and other don't load correctly.
I have to keep hitting refresh two or three times. Also thunbnails are not displaying. Even the apple page comes up looking buggy.
Please help!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. First, disconnect all wired peripherals except keyboard, mouse, monitor, and Ethernet, if applicable. Boot in safe mode and log in as yourself. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
During startup, you will see "Safe Boot" on the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is slower than normal, and some things won’t work at all, perhaps including wireless networking on certain Macs. If you usually connect to the Internet via WiFi, and it doesn’t work in safe mode, connect using an Ethernet cable. If you can’t do that, reboot as usual (i.e., not in safe mode) and perform a safe login, as follows: Enter your credentials at the login screen, then hold down the shift key and click the “Log in” button. Keep holding the key until the menu bar appears. In this mode, your login items, among other things, won’t load.
In safe mode, test again. Same problem(s) now?
After testing, reboot (if you booted in safe mode) or log out/log in (if you performed a safe login) as usual.

My Safari is not working right. It often stalls and I get the "colored spinning wheel of Death". I send reports to Apple, but I never get any response or helpful info. What do I do to get Safari working correctly on my MacBook laptop?

My Safari is not working right. It often stalls and I get the "colored spinning wheel of Death". I send reports to Apple, but I never get any response or helpful info. What do I do to get Safari working correctly on my MacBook laptop?

From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the errant extension by uninstalling and reinstalling it. Its settings will revert to their defaults. If the extension still causes a problem, remove it permanently or refer to its developer for support.
Uninstall the McAfee product by following the instructions on whichever of the pages linked below is applicable:
How to install or uninstall McAfee Internet Security for Mac
How to manually remove VirusScan for Mac 8.6.x using a removal script
How to uninstall and reinstall McAfee Agent 4.x on Macintosh computers
Note that if you have already tried to uninstall the software, you may have to reinstall it in order to finish the job. If you have a different version of the product, the procedure may be different.
Back up all data before making any changes.

Remote not working right

I've had my FIOS about 2 months, put new batteries in remote and it is still not working right. Some things work fine. Other things stopped working - can't delete a DVR show, can't change channels with one digit, but it will if I add all 4 digits, info box on bottom of screen never disappears (unless I hit exit). What's wrong?
My second TV set-up is OK.
Solved!
Go to Solution.

netmouse wrote:
I've had my FIOS about 2 months, put new batteries in remote and it is still not working right. Some things work fine. Other things stopped working - can't delete a DVR show, can't change channels with one digit, but it will if I add all 4 digits, info box on bottom of screen never disappears (unless I hit exit). What's wrong?
My second TV set-up is OK.
Might not even be a remote issue. Have you tried rebooting the box?
If you do think it's the remote it's still under warranty.
You can get a free replacement easy within the dvr's menu.
Here is a page that tells you ways to get a replacement.
http://www.verizon.com/support/residential/tv/fiostv/remote+controls/troubleshooting/questionsone/12...
Get a new remote and if you still have the same issues then you'll know its the dvr that needs to be replaced.

Messages not working while using Internet sharing from my iMac ... Any troubleshooting tips/approaches ?

I am connecting to the internet using the Internet Sharing from my iMac ...
The trouble is the messages in the Messages app are not sent when I am connected through my iMac ... When I key in a message and hit send a progress bar appears fills up till 90% and just gets stuck there and after a while the red exclamation mark stating the message was not sent appears ... Now if I connect through my wi-fi router or thether through my phone it works fine ... I can send / recieve messages ...
Similar points to note - Today when I tried to make an App Purchase - The security info screen ( new additon - http://isource.com/2012/04/11/iphone-app-store-security-info-alert/ ) popped up but I got a blank screen for the securtiy questions screen ... It was not loading the screen ... Some games the game center invite does not work through my Internet sharing (tried in MetalStorm) ... but works fine thorough wi-fi or thether ...
What could be the problem with my iMac s sharing? Any suggestions would be really useful /// Thanx in advance
I am running Lion ... and I have updated to the latest Airport software ...
Only thing I tried was changing the DNS ... but that s not related right ?

Powerline adapters use your home powerlines (mains a/c) to connect your devices via ethernet to your modem, they're easy to set up and the they TOTALLY fixed my ATV problem, the problem seems to be with the wireless. I've been trawling through apple discussions, and did found a workaround to my problem https://discussions.apple.com/thread/4222883?start=0&tstart=0
but its just a workaround :/

Photoshop CS5 - colour settings in Print menu not working after update Mac OSX maverick

After upgrading to Maverick OSX on the iMac printing from CS5 via Epson R3880 is not working correctly. In Print Settings menu the drop downs for Colour and Colour Settings are greyed out. I already re-installed PS and installed the new drivers from epson. Any ideas?

but after choosing PS manages color, the options in the print menu for choosing color (color or b&W) and color settings are not available anymore. They used to be the last three years I printed with photoshop/epson 3880.
Instead they are greyed out now.
attached screenshot:
Op 30 mei 2014, om 01:47 heeft Chris Cox <[email protected]> het volgende geschreven:
Photoshop CS5 - colour settings in Print menu not working after update Mac OSX maverick
created by Chris Cox in Photoshop General Discussion - View the full discussion
If Photoshop managed color, then the controls in the printer driver are supposed to be grayed out - that's how Apple specifies drivers to work (because only one party should be managing the print color).
So what you're describing is perfectly normal.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6420209#6420209
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Command key not working right in several applications

All of a sudden, some functions are not working right, i.e., in PhotoShop when I select the Zoom key I get a minus rather than the usual plus. In Date and Time, I started getting a 24 hour clock. If I go there in System Prefs and change to 24 hour clock, then the readout on my menu bar is for 12 hour clock. Sometimes when I use Command-Q the machine asks me if I want to close all programs rather than just the one I'm attempting to leave. What is wrong?

Hi n,
I have no idea if this might work, but I'd reset the PRAM and SMC.

Sound Blaster X-FI Pci Express Front Panel Not working right Win7

ASound Blaster X-FI Pci Express Front Panel Not working right Win7
Please read carefully
Part number Part SB040
Hello,
I have a fresh install of Win7x64 OEM. First, I want to say that I have "AUTOMATICALLY MUTE SPEAKERS" UNCHECKED under the Headphone detection tab. I have tried "Automatically Enable Headphone Settings" checked or unchecked. No difference.
As soon as I plug in headphones to the front panel connector , the speakers in the mixer say "disconnected" (see below) and the SPDIF becomes the default output. There is no way for me to change this. And there isn't any sound coming from the headphones when plugged into the front panel. (the mic front panel works fine)
I am using the nati've Win7 drivers for the card. Apparently the Win 7 drivers on your site are older than the nati've ones.
This worked fine in Windows XP 32. Any ideas.

Ok guys this is how I fixed the problem on my X-Fi PCI-Express. Open the Creative SB X-Fi Volume panel. Mine is set in game mode and I have 5 vertical sliders for Line-In /Mic, MIDI Synth, Digital-In, and the last one will say one of three things either Digital-In, Microphone, or Mirophone FP. At the top of the?slider there is a tab which brings up a drop down menu. Mine was default set to Digital-In, I switched it to Mirophone FP (tried Microphone first and it worked but the FP sounds better for me) and cranked it all the way up and my problem was solved. Very frustrating one though as there is no documentation that led me to the fix it was just playing around with it till I could figure it out.
I hope this at least helps some of you out.

Is there any way to redownload iOS 5 my iPod touch 4 th generation white 32 gig is not working right?

My iPod is not working right. It's slow and lags and just doesn't work and always exits apps. I was if there was any way to redownload ios5 because it does the same things after I've reset about 4 times. Please help! It's even lagging why I am typing this. The thing that I checked below are all of the things that are not working on my iPod.

You cannot reinstall iOS without doing a restore. But you might first try a software update. If you have iOS 5.0 or 5.0.1, you can update to iOS 5.1 by going to Settings > General > Software Update.

TS1398 Hello, my iPod touch is not working right. It says its connected but if I select App Store, safari and other apps that require wifi pops out a note saying either"error loading" or "cannot connect to iTunes Store" and would exit the app automaticall

Hello, my iPod touch is not working right. It says its connected but if I select App Store, safari and other apps that require wifi pops out a note saying either"error loading" or "cannot connect to iTunes Store" and would exit the app automatically. Please help.
Thank You.

See:
Can't connect to the iTunes Store

IPad 2 was updated to latest iOS 7 and has been not working right since. I have tried to do a restore but still continues to go into reboot mode by itself and very erratic. Can no longer trust it. I tried to complain to Apple but have to give them 20 buck

iPad has not worked right since it updated to latest software. Tried to question Apple about it but it costs 20 bucks just to lodge a complaint. Is this normal Apple behavior or am I missing something. Also anyone else having issues with upgrade to iOS7. It was working great until that point and now goes into reboot mode often and sometimes will continuously reboot several times. I have tried to restore but that didn't clear the problem. Any thoughts or help would be appreciated.

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

HT4623 My iPad mini is not working right ?? On some apps

My iPad mini is not working right on some apps

You can always try to reset your device and see if it helps matters any:
Device Reset (won't affect settings/data/music/apps/etc)
1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.

Since updating to 706 the sound on my ipad2 is not working right. On videos or music. There is constant distortion and what sounds like interference. Any ideas?

Since updating to 706 the sound on my ipad2 is not working right--on videos or music. There is distortion and some kind of interference at all times. Any ideas?

Has the unit EVER been jailbroke?
If "No," first try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this.

T42 keyboard not working right, HELP PLEASE

My keyboard is not working right. If I push the key it wont work,but if I hold the key for a couple seconds then it works was told to replace the keyboard and I did with a new one. But it is still doing it. Can anyone tell me what the problem is. Model # R4U machine type 2378, OS XP-PRO , COA SP2 , S/N L3xxxxx.
Message Edited by scottzilla on 12-15-2008 10:05 PM
Moderator Note; s/n edited for members own protection
Message Edited by andyP on 12-16-2008 07:57 AM

It's the Quick Selection Tool in Photoshop Elements 9 and I'm trying to get the background and make it another layer so I can even out the color of the background then bring down the transparency. Not sure if that makes sense. I'm new to this.... Sometimes the area it will grab can go ...not fast.. but not slow. Sometimes it's like it's just messed up and literally takes 30 seconds to process each move. I rebooted my computer and re opened it and it helped a little. It's not clear what causes it when it messes up and when it doesn't. Just frustrating. It's probably user error because I'm so new at Photoshop. Thanks for your input. I really appreciate it.

Menu Not working right in Internet Expleror

Similar Messages

Maybe you are looking for