Menu option not available in SAP GUI transaction in Portal

Hi all,
When accessing SAP Transaction iview via the portal 7.31 the drop down menu option is not available in the first session.
It is available in the second session and when accessing SAP Traansaction directly from the SAPLOGON pad, the option allows users to open other sessions and stop transactions.
How can we enable the menu option in Transaction iview in Portal?
Plz find the attaches screen shot of error.

Hi Chandra,
Can you try the same senario with broswer compatible mode?
Because these function will be over ride the style sheet.
Thanks
Patrick

Similar Messages

Cisco Presence Server 8.5 Application - Cisco Jabber menu option not available

                   Dear Support,
                   I am trying to configure cisco jabber with Presence Server 8.5. All the documentation indicate that jabber option in Presence must be configured in the Application -> Cisco Jabber menu, however this menu option is not available in my Presence Server. Anyone know why this is happening? I am using CUCM version 8.6.1. I installed the jabber client for windows in two Windows 7 machines and I have presence and IM funcitonalities but I can not make calls or activate other features like video, desktop sharing and so on.
                    Any help would be really appreciated.
                    Best Regards,
                    Roberto López.

Thanks a lot for pointing me to the right direction.
Just one more question. After installing jabber for windows on a couple of laptops and signing in, the call option (right click on contact or telephone icon located right to the contact) is not available right away meaning that I have to wait a long time for it to appear or if I start a call from the "search or enter number to call" field then all call button and options are enabled. Do you have any idea why this could be happening?
Best Regards,
Roberto.

Extranet Management menu is not available in SAP JAm enterprise edition

We have enterprise edition, but I do not see the Extranet Management Munu in the Admin Section

In case Ankur Godre 's suggestion does not pan out then please contact SAP Jam support, via the Successfactors support site.
https://support.successfactors.com
Thank you.

BEx Analyzer not working in SAP GUI 7.10

Dear All,
BEx Analyzer 7.0 is not working on SAP GUI 7.10. Following are the details:
OS: Windows XP SP2
Installed the following softwares (in the sequential order):
1. Microsoft .Net Framework 2.0 SP1
2. MS Office 2003 (without any service packs)
3. SAP GUI 7.10 (used SAPAllSetup.exe) to install both BEx Analyzer 3.5 and BEx Analyzer 7.0 alongwith SAP GUI 7.10.
While BEx Analyzer 3.5 runs fine, 7.0 does not.
Upon running BEx Analyzer 7.0 from the Programs menu, I see a toolbar on the left hand side on MS Excel in German. Whenever I click on any button, they do not respond.
When I tried to install update for Office 2003 (KB907417), I received the message stating the patch has already been applied.
I also applied SAP GUI 7.10 Patch Level 8, but still the problem remains the same.
Running Tcode RRMX from the SAP GUI opens MS Excel with both the toolbars of 3.5 (on top) and 7.0 (on left). As before, 3.5 works fine, while 7.0 does not.
Do I need to install Office SP2 or SP3, as well? Or something else? Any solutions?
Thanks and Regards,
Sachin.

Hi All,
This problem is due to .NET 2.0 assembly(nothing but .dll's),
Step1 : Check if you can see this C:\WINNT\assembly\GAC exists
If it does and still getting the error, then follow these steps,
1) Uninstall office03
2) Uninstall GUI
3) Uninstall .Net 2.0
4) Reboot
5) Install .dll(WindowsXP-KB935448-x86-dll.exe) fix(this is due to .net1.1 and 2.0 coexistence)----- only if u get a critical message at startup.
5a) Reboot
5b) Install .net1.1
5c) Reboot
5d) Install .net2.0
5e) Reboot
6) Install office 03
6a) Reboot
7) Install .PIA's (O2003PIA.MSI)
7a) Reboot
8) Install setupall.exe for GUI
9) Install KB907---- (office2003-KB907417-FullFile-ENU.exe)
10) Reboot
Let me know if you encounter any problems.
OR....
Update the Latest Patchs of GUI & Bex.
BI710SP03_300-10004472.EXE
bi710sp04_400-10004472.exe
gui710_6-10002995.exe
Hope it helps you...
@shaik

I have the latest version of photoshop cc . Why is the focus select option not available ? (for selecting the in focus area)a)

I have the latest version of photoshop cc. Why is the focus selection option not available ?

Use CC 2014 menu Help>System Info... use its copy option and paste the info here. So we know your running CC 2014 not CC and that you have an enabled GPU....and latest device drivers.

Preview on [device name] option not available

Preview on [device name] option not available on Folio Overlays

In v20 its available in the Folio Builder panel (iPad only, I think). You have to plug to your Mac to the iPad with the USB cable and starting the Adobe Content Viewer app on the iPad first. Otherwise check iTunes on your Mac if your iPad is listed under "Devices".
Are you using InDesign CS5.5 or InDesign CS6?
You have to be up to date with the Overlay Creator panel to v20 as well. Check for that.
Recently I had no chance with InDesign CS5 and the v20 tools installed on a Mac with OSX 10.5.8.
Uwe

Outboung Campaing: Error Unable to communicate with Enterprise Server. outbound Option not available

Hi everyone,
I'm running UCCX 8.01 + CUCM 7.1+ Cisco 7942 just for learning purpose. After creating the Outbound Campaign and imported the Contact List the call is received by the agent (call is state is received as Offering) but after press the Accept, Reject or any othe action button is received the error:
Error Unable to communicate with Enterprise Server. outbound Option not available (attached to post).
What does this mean?
Regards
Please rate all useful posts
Favor calificar todos las respuestas útiles.
LinkedIn Profile: do.linkedin.com/in/leosalcie
MDGDP, CCNA, CCNA Voice, CCNP Voice Certified

Any idea?
Please rate all useful posts
Favor calificar todos las respuestas útiles.
LinkedIn Profile: do.linkedin.com/in/leosalcie
MDGDP, CCNA, CCNA Voice, CCNP Voice Certified

WLAN override option not available for WLC 4402 - 6.0.196.

Hi All,
Its kind of weird BUT it seems that the option for WLAN override is missing.u.
I could find it on the lower version BUT not on the 6.0.196.
Please help.
Does this mean I could only set it up via the WCS and not the WLC directly.
Thank you.
Warmest Regards,
Azzafir Ariff Patel.

Hi Scott,
Thank you so much for the clarification.
Thanks again.
Quoting fella5 :
azzafir,
>
A new message was posted in the Discussion thread "WLAN override
option not available for WLC 4402 - 6.0.196.":
>
https://supportforums.cisco.com/message/3042635#3042635
>
Author : Scott Fella
Email : [email protected]
Profile : https://supportforums.cisco.com/people/fella5
>
Message:

Option not available to add skype to go number in ...

Option not available to add skype to go number in canada.... Urgent its been 1 week

venkatesh wrote:
Option not available to add skype to go number in canada.... Urgent its been 1 week
Skype To Go numbers are available in the following countries:
Australia
Canada
Chile
Denmark
Estonia
Finland
Greece
Hungary
Ireland
Latvia
Lithuania
Luxembourg
Mexico
New Zealand
Poland
Portugal
Romania
Slovenia
Singapore
South Africa
Sweden
United Kingdom
USA
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

HT204053 iCloud option not available on MacBook Air

Why is the iCloud option not available on my MacBook Air? It's not under the System Preferences in the Apple dropdown...only the MobileMe options are still there.

r_lopez wrote:
Why is the iCloud option not available on my MacBook Air? It's not under the System Preferences in the Apple dropdown...only the MobileMe options are still there.
iCloud won't appear in System Preferences in Snow Leopard. But, you can get some of the features of iCloud working with 10.6.
Mail AND iCal work just fine. See this article: http://bit.ly/LvVCR2
I use the iCal info on two of my own Macs and it works fine. The Address Book hack is a maybe. Read through the comments associated with the blog entry. Some folks have gotten the AB hack to work by locking the plist file.

Content Server Explorer is not available after sucessful installation of Plumtree Portal

Content Server Explorer is not available after sucessful installation of Plumtree Portal.
Please reply us.

To clarify, do you have the User Profile Service (including MySite Host) up and running on this environment? That's subtley different to the full MySite experience which is clearly not applicable...
Interesting question - thanks for that. Until now I didn't realise there was a difference.
The User Profile Service is up and running, but no MySite Host is set. (I don't believe MySite will be available anywhere here. I guess that means there's no valid MySite Host for me to use.)
Many thanks,
Geoff

IView not found: com.sap.ip.bi.web.portal.integration.launcher

Hi!
I am about to integrate SAP BI into SAP EP 7.0.
All the necessary steps with the program "RSPOR_SETUP" I already executed.
Unfortunately when I try to execute a Query on Portal I get the following error:
iView not found: com.sap.ip.bi.web.portal.integration.launcher
Can some one help me to solve this error?
Thank you very much!
regards
Holger Thomasson

hi Thom,
Make sure that you have already installed the BI 7.0 web templates as per the oss note 990321.
If not, install the BI 7.0 web templates according the note. BI 7.0 templates are :
0ANALYSIS_PATTERN
0ANALYSIS_PATTERN_EXPORT
0INFO_CONSUMER_PATTERN
0ANALYSIS_PATTERN_ICP
0ANALYSIS_PATTERN_INFO
0QUERY_TEMPLATE_BROADCAST_PDF
0ANALYSIS_PATTERN_HEADER
0ANALYSIS_PATTERN_FOOTER
0ANALYSIS_PATTERN_FILTER
Web Item
0PATTERN_BARCHART_STANDARD
Thanks.

SAP-Exit option not available in Query Designer

Hi,
I'm trying to create a variable in BEx Query Designer that is processed by a SAP-Exit . But I don't have the option "SAP-Exit" in the drop down menu for processing type (from SAP-Help: In the variables editor, choose the processing type SAP Exit from the General tab page.).
Am I missing any rights? Any ideas where the problem might be or is this just not possible at all and I have to use a customer exit?
Regards,
Alexander

Hi, I think I didn't explain my problem right:
I'm trying to use a variable in BEx Query Designer created by SAP that will be processed by a SAP-Exit. How can I add a SAP variable in BEx? I thought I have to create an own variable and assign "SAP-Exit" as processing type . But obviously this is wrong as I don't have the option for processing type "SAP-Exit". Any ideas?
Thanks,
Alex

Right click not working in sap gui for html in transactions

Dear experts,
i m using sap gui for html in transations iview
but when i go to trasaction and click on some field automatically blank window comes(no any trasaction or no any field view)
it not happen on all the field but on some field for eg;- when i use tcode zhuct right click on first field works properly but other field not execp right click(blank window comes)
please help im in great problem.
due to this problem i am not able to impliment portal

Don't open 2 threads for one issue.
Anja Engelhardt
Moderator

F1 Help Perfomance Assistant not working - ITS SAP GUI HTML

Hi All,
when using a Transaction in SAP Portal i like to use the F1 Help. Transaction is displayed by ITS SAP GUI HTML. I have the option to display the Help in:
- Modal Window <-- this works
- Performance Assistant <-- not working
When pressing F1 an error message appears saying: "Expression_not_Num" while using the perfomance assistant.
- Is there a configuration missing? Is something not installed?
- Can i change the default personalization setting for help for all users to modal window?
Any ideas?
Regards
M. Stanka

Hi Michael Stanka ,
i got same issue from last week onwards.. If press F1 ,it displays like "Page cant be displayed". I searched in forums also but i couldnt get clear point. U posted ur issue was resolved.. Could u plz provide the steps how to solve?? My mobile no:09566855978(India-Chennai)

Menu option not available in SAP GUI transaction in Portal

Similar Messages

Maybe you are looking for