Menu to long - some items are unreachable unless the scrollbutton appears

Hi all,
sometimes when you have menus with many items, not all items can be entered within the window. When you restart your forms application without booting in between there is a horizontal scrollbutton (with a little arrow on it) both on top and button. By pushing it you can scroll through the whole menu. Has anybody else experienced this, too ?
Why doesn´t the button appear right from the start ?
Any ideas how to handle such large menus (apart from reorganization) ?
We use Forms10g on LINUX OAS.
Regards
Frank

I sorted this out in the end and thought my experience might help anyone else with similar problems.
I had got no joy from anyone in any forum and kept getting more and more cryptic error messages (errors 1303, 69, 48, 53...). Sometimes only some podcasts (not all) would sync, sometimes only music. The files were often complete and worked perfectly, sometimes they were partial.
On my fourth try I got CHECKDISK to work (in Vista, right click on the drive, choose Properties->Tool->Error Checking->Check local disk: select both options). This took about 30 mins. After that, syncing worked like A dream and my iPod now has all my 3300 music tracks and 1800 podcast ready and waiting.
So, despite appearances, it was the iPod itself that was the problem and not iTunes. The disk must have got corrupted with a lot of bad sectors, which have now been repaired or marked off. Why can't iTunes or iPod software not recognise the problem? Also, I do think Apple should offer some sort of support - a chat system would be fine.
Phew!

Similar Messages

  • Spy menu only showing some items and properties not available

    I am having some issues with the spy menu. In order to try and fix my issues I built the menu from scratch again on one of my pages. Everything works now on that page and when I upload it to the server, it is all there.
    However, when I then copy and paste the menu to all the other pages and upload the the server, the submenu doen't show anymore. When I go and troubleshoot it and highlight the menu in its entirety and click properties, no properties will show. On the working page, this ation delievers me a properties bar where I can + or - menu items. Why is this? As this must be why the submenu is not showing either?
    The page where everything works is this (See sub menu under coaching clinics) http://www.golifecoaching.com.au/go-beyond-registration-test but on every other page on this website, this submenu disappears.
    Can anyone help? I am tearing my hair out and don't fancy having to build the menu from scratch for every page. There has to be a better way.
    I use CS4 and this is my menu;
       <div id="navigation">
        <!--MENU-->
        <ul id="MenuBar2" class="MenuBarHorizontal">
          <li><a href="index.html">Home</a>        </li>
          <li><a href="what-is-coaching.html">What is Coaching</a></li>
          <li><a href="coaching-benefits.html">Coaching Benefits</a>        </li>
          <li><a href="do-you-need-a-life-coach.html">Do You Need a Life Coach</a></li>
          <li><a href="about-go-life-coaching.html">About Go Life Coaching</a></li>
          <li><a href="#" class="MenuBarItemSubmenu">Coaching Clinics</a>
            <ul>
              <li><a href="holdsworth.html">Coaching for Carers</a></li>
              <li><a href="coachingclinic.html">The Coaching Clinic</a></li>
            </ul>
          </li>
          <li><a href="contact-us.html">Contact Us</a></li>
          <li><a href="http://www.golifecoaching.com.au/blog">Blog</a></li>
        </ul>
            <!--END MENU-->
    Jen

    That is brilliant, that is exactly it! Thank you sooooo much for your suggestion. I am so relieved.
    Yes a template would be best, but I am not sure how to do that, so I am left with doubling my work evertime I make a change on this site.
    Thanks Jen
    Date: Sat, 13 Aug 2011 16:43:59 -0600
    From: [email protected]
    To: [email protected]
    Subject: Spy menu only showing some items and properties not available
    Disclaimer: I am new to coding in general and this is my first attempt to help someone.
    I think the properties bar with the + - has to do with the javascript coding that is generated when you create a new tag, and it is located near the bottom of the page just before the closing body tag. 
    looks something like this:
    <script type="text/javascript">
    var MenuBar2 = new Spry.Widget.MenuBar("MenuBar2", );
    </script>
    so dont forget to copy that over too.  Also, check the CSS that is associated within each page and make sure they are all in the same style.
    P.S. Have you considered using a template for the menu bar so you dont have to copy it over each time?
    >

  • Reg Batch in delivery  some items are not showing gross weight please help

    please give me your help
    in Deliveries some items are not showing gross weight
    please give me some help

    Dear Ramsuresh,
              Check are maintaining gross weight in the Master data of those items or not.
    If not maintain in the Material master then create delivery
    I hope it will help you
    Regards,
    Murali.

  • Sometimes my ipod does not down load my entire library when I sync up with itunes, even if I have items loaded in the play list and can see them in the play list in my itunes when I check my ipod play list some items are missing part 1 will be there but p

    Sometimes my ipod does not down load my entire library when I sync up with itunes, even if I have items loaded in the play list and can see them in the play list in my itunes when I check my ipod play list some items are missing part 1 will be there but part two is not. Why?????

    How is your iPod configured to sync music from your iTunes library?  In other words, what options and configurations do you have enabled from under the iPod's Summary and Music configuration panes in iTunes?
    B-rock

  • I have multiple iPhoto libraries w/ duplicates in several. How can I consolidate and find the dupes? Some photos are versions of the original.

    I have multiple iPhoto libraries w/ duplicates in several. How can I consolidate and find the dupes? Some photos are versions of the original. On my iMac, I also have many folders containing some of the same photos. My computer is used for both personal and business purposes. My libraries should be separated, one for each.

    To merge libraries use iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ -  or Aperature
    To find duplicates within an iPhoto library use iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ - 
    Photos that are not in an iPhoto library can be imported telling iPhoto not to import duplicates (an imperfect procews) and then IPLM can find the duplicates
    As to keeping seperate libraries - only you can do that - IPLM can move photos between libraries for you but only you can know which photos should be in which library
    LN

  • Some segments are missing in the idocs for master data zdebmas

    hi guru's,
    can any one hlep me here we facing the probelumm
    some segments are missing in the idocs for master data zdebmas
    , there is some issue on the generation of the Site Master IDoc (Message type: ZDEBMAS, Basic type: DEBMAS06).
    This is using the SAP standard program (RBDMIDOC) which reads the Site master change pointers.
    There is  some segments below is missing in the IDoc:
    how to chcek this probelumm...

    hi
    i got the function module. it is  triggerig whne i do changepointer running.
    what ever changes i made only that segments are onlycomming in to the idoc. but remaing segments are not comming.
    my req is to show all segments  even if i do changes in one segmet fields  dont change theay have send to the interfece all athe segments.i ahve to do some enhancemetns for that
    can u plse help me the login  or any function module which will fill the alla the segmetns .

  • I bought CDs but some songs are interrupted in the middle .... can anyone help me??

    I bought CDs but some songs are interrupted in the middle .... can anyone help me??

    How to report an issue with Your iTunes Store purchase

  • How can i see which items are taking up the most disk space

    I have a Titanium PowerBook G4 with a 20GB hard drive. I'm currently using 15GB. I have tried searching through my hard drive to see which programs are taking up the most space. When I add up the totals of the various folders, etc., it's not 15GB worth. I feel like some items must be nested somehow, making them difficult to find. Is there some way to search your computer by size of items? I know that opening the hard drive and clicking on the size tab will sort things according to size. However, the folders don't show their size unless you click on them individually. Any suggestions?
    Thanks.

    While viewing a Finder window go to View>Show View Options, put a check in the box for 'Calculate All Sizes'. This is a setting you don't normally want to have turned on as it slows down the refresh when you switch windows, so you might want to remove the check once you identify the disk hogs.
    BTW- You can free up a lot of disk space & RAM if you remove any fonts that you & the OS don't really need. You may also have a great deal of space taken up by unnecessary printer drivers, not to mention the plethora of ReadMes & other 'goodies' that get added when you install software.
    HTH |:>)

  • If Records of different list items are entered, then the data is not getting inserted in the table.

    Hi Everyone,
    A Very Very Happy, Fun-filled, Awesome New Year to You All.
    Now coming to the discussion of my problem in Oracle Forms 6i:
    I have created a form in which the data is entered & saved in the database.
    CREATE TABLE MATURED_FD_DTL
      ACCT_FD_NO    VARCHAR2(17 BYTE)               NOT NULL,
      CUST_CODE     NUMBER(9),
      FD_AMT        NUMBER(15),
      FD_INT_BAL    NUMBER(15),
      TDS           NUMBER(15),
      CHQ_NO        NUMBER(10),
      CREATED_DATE  DATE,
      CREATED_BY    VARCHAR2(15 BYTE),
      PREV_YR_TDS   NUMBER(15),
      ADD_FD_AMT    NUMBER(15),
      DESCRIPTION   VARCHAR2(100 BYTE),
      P_SAP_CODE    NUMBER(10),
      P_TYPE        VARCHAR2(1 BYTE)
    The form looks like below:
    ENTER_QUERY     EXECUTE_QUERY     SAVE     CLEAR     EXIT
    ACCT_FD_NO
    CUST_CODE
    FD_AMT
    FD_INT_BAL
    PREV_YR_TDS
    TDS
    ADD_FD_AMT
    P_SAP_CODE
    P_TYPE
    CHQ_NO
    DESCRIPTION
    R
    W
    P
    List Item
    There are 5 push buttons namely ENTER_QUERY, EXECUTE_QUERY, SAVE, CLEAR, EXIT.
    The table above is same as in the form. All the fields are text_item, except the P_TYPE which is a List_Item ( Elements in List Item are R, W & P).
    The user will enter the data & save it.
    So all this will get updated in the table MATURED_FD_DTL .
    I am updating one column in another table named as KEC_FDACCT_MSTR.
    and
    I want this details to get updated in another table named as KEC_FDACCT_DTL only if the P_TYPE='P'
    CREATE TABLE KEC_FDACCT_DTL
      FD_SR_NO                NUMBER(8)             NOT NULL,
      FD_DTL_SL_NO            NUMBER(5),
      ACCT_FD_NO              VARCHAR2(17 BYTE)     NOT NULL,
      FD_AMT                  NUMBER(15,2),
      INT_RATE                NUMBER(15,2),
      SAP_GLCODE              NUMBER(10),
      CATOGY_NAME             VARCHAR2(30 BYTE),
      PROCESS_YR_MON          NUMBER(6),
      INT_AMT                 NUMBER(16,2),
      QUTERLY_FD_AMT          NUMBER(16,2),
      ITAX                    NUMBER(9,2),
      MATURITY_DT             DATE,
      FDR_STAUS               VARCHAR2(2 BYTE),
      PAY_ACC_CODE            VARCHAR2(85 BYTE),
      BANK_CODE               VARCHAR2(150 BYTE),
      NET_AMOUNT_PAYABLE      NUMBER,
      QUATERLY_PAY_DT         DATE,
      CHEQUE_ON               VARCHAR2(150 BYTE),
      CHEQUE_NUMBER           VARCHAR2(10 BYTE),
      CHEQUE_DATE             DATE,
      MICR_NUMBER             VARCHAR2(10 BYTE),
      PAY_TYPE                VARCHAR2(3 BYTE),
      ADD_INT_AMT             NUMBER(16,2),
      ADD_QUTERLY_FD_AMT      NUMBER(16,2),
      ADD_ITAX                NUMBER(16,2),
      ECS_ADD_INT_AMT         NUMBER(16),
      ECS_ADD_QUTERLY_FD_AMT  NUMBER(16),
      ECS_ADD_ITAX            NUMBER(16)
    So for the push button 'Save' , i have put in the following code in the Trigger : WHEN BUTTON PRESSED,
    BEGIN
         Commit_form;
              UPDATE KEC_FDACCT_MSTR SET PAY_STATUS='P' WHERE ACCT_FD_NO IN (SELECT ACCT_FD_NO FROM MATURED_FD_DTL);
              UPDATE MATURED_FD_DTL SET CREATED_DATE=sysdate, CREATED_BY = :GLOBAL.USER_ID WHERE ACCT_FD_NO = :acct_fd_NO;
    IF :P_TYPE='P' THEN
         INSERT INTO KEC_FDACCT_DTL
              SELECT FD_SR_NO, NULL, MATURED_FD_DTL.ACCT_FD_NO, FD_AMT, INT_RATE, P_SAP_CODE,
                   GROUP_TYPE, (TO_CHAR(SYSDATE, 'YYYYMM'))PROCESS_YR_MON,
                   FD_INT_BAL, (FD_INT_BAL-MATURED_FD_DTL.TDS)QUTERLY_FD_AMT , MATURED_FD_DTL.TDS,
                   MATURITY_DATE, P_TYPE, NULL, NULL, (FD_INT_BAL-MATURED_FD_DTL.TDS)NET_AMOUNT_PAYABLE,
                   NULL, NULL, CHQ_NO, SYSDATE, NULL, 'CHQ', NULL, NULL, NULL, NULL, NULL, NULL
              FROM MATURED_FD_DTL, KEC_FDACCT_MSTR
         WHERE KEC_FDACCT_MSTR.ACCT_FD_NO=MATURED_FD_DTL.ACCT_FD_NO;
    END IF;
    COMMIT;
         MESSAGE('RECORD HAS BEEN UPDATED AS PAID');
         MESSAGE(' ',no_acknowledge);
    END;
    If P_TYPE='P' , then the data must get saved in KEC_FDACCT_DTL table.
    The problem what is happening is,
    If i enter the details with all the records as 'P' , the record gets inserted into the table KEC_FDACCT_DTL
    If i enter the details with records of 'P' and 'R' , then nothing gets inserted into the table KEC_FDACCT_DTL.
    Even the records with 'P' is not getting updated.
    I want the records of 'P' , to be inserted into table KEC_FDACCT_DTL, even when multiple records of all types of 'P_Type' (R, w & P) are entered.
    So, can you please help me with this.
    Thank You.
    Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
    Oracle Forms Builder 6i.

    Its not working properly.
    At Form_level_Trigger: POST_INSERT, I have put in the following code.
    IF :P_TYPE='P'THEN
      INSERT INTO KEC_FDACCT_DTL
      SELECT FD_SR_NO, NULL, MATURED_FD_DTL.ACCT_FD_NO, FD_AMT, INT_RATE, P_SAP_CODE,
      GROUP_TYPE, (TO_CHAR(SYSDATE, 'YYYYMM'))PROCESS_YR_MON,
      FD_INT_BAL, (FD_INT_BAL-MATURED_FD_DTL.TDS)QUTERLY_FD_AMT , MATURED_FD_DTL.TDS,
      MATURITY_DATE, P_TYPE, NULL, NULL, (FD_INT_BAL-MATURED_FD_DTL.TDS)NET_AMOUNT_PAYABLE,
      NULL, NULL, CHQ_NO, SYSDATE, NULL, 'CHQ', NULL, NULL, NULL, NULL, NULL, NULL
      FROM MATURED_FD_DTL, KEC_FDACCT_MSTR
      WHERE KEC_FDACCT_MSTR.ACCT_FD_NO=MATURED_FD_DTL.ACCT_FD_NO;
      END IF;
    MESSAGE('RECORD HAS BEEN UPDATED AS PAID');
    MESSAGE(' ',no_acknowledge);
    It worked properly when i executed first time, but second time , in database duplicate values were stored.
    Example: First I entered the following in the form & saved it.
    ACCT_FD_NO
    CUST_CODE
    FD_AMT
    FD_INT_BAL
    PREV_YR_TDS
    TDS
    ADD_FD_AMT
    P_SAP_CODE
    P_TYPE
    CHQ_NO
    DESCRIPTION
    250398
    52
    50000
    6000
    0
    600
    0
    45415
    P
    5678
    int1
    320107
    56
    100000
    22478
    3456
    2247
    0
    45215
    R
    456
    320108
    87
    50000
    6500
    0
    650
    0
    21545
    W
    0
    In the database, in table KEC_FDACCT_DTL, the ACCT_FD_NO:250398 with P_TYPE='P' record was inserted.
    ACCT_FD_NO
    P_TYPE
    250398
    P
    But second time, when i entered the following in the form & saved.
    ACCT_FD_NO
    CUST_CODE
    FD_AMT
    FD_INT_BAL
    PREV_YR_TDS
    TDS
    ADD_FD_AMT
    P_SAP_CODE
    P_TYPE
    CHQ_NO
    DESCRIPTION
    260189
    82
    50000
    6000
    0
    600
    0
    45415
    P
    5678
    interest567
    120011
    46
    200000
    44478
    0
    4447
    0
    45215
    R
    456
    30191
    86
    50000
    6500
    0
    650
    0
    21545
    W
    56
    In the database, in the table KEC_FDACCT_DTL, the following rows were inserted.
    ACCT_FD_NO
    P_TYPE
    250398
    P
    250398
    P
    260189
    P
    320107
    R
    320108
    W
    There was duplicate of 250398 which i dint enter in the form second time,
    All the other P_TYPE was also inserted , but i want only the P_TYPE='P' to be inserted into the database.
    I want only those records to be inserted into the form where P_TYPE='P' and duplicate rows must not be entered.
    How do i do this???

  • Just bought a nano and want to download some of my iTunes library. The "Music" button shows almost all my selections but some albums are missing, yet thos albums appear on the nano icon on my desktop but none of the others. What's happening?

    Just bought a nano and want to download some of my iTunes library. The "Music" button shows almost all my selections but some albums are missing, yet ONLY those albums appear on the nano icon on my desktop after being dragged there but none of the others. What's happening?
    I've read some of the post here that I thought might help but they refer to titles (Music) and triangles in the "Devices" window which are nowhere to be seen when I open the "Devices" window.
    I have iTunes 11.0.3 and Mac OS 10.6.8. Does this make a difference?

    I should mention that, for the first problem, I do make sure that my new tracks are stored in the folder where I told iTunes that my music is in. Also, when I say the cataloging of my library stops short of cataloging all my songs, I have tried leaving the computer unattended for days (my computer's sleep mode is disabled). It always stops before cataloging all of my music regardless of whether I am doing something else while iTunes is cataloging, or if I just let iTunes be the only program that's open during the cataloging process.

  • Some fields are missing in the ALV output

    Hi ,
    I have created a normal ALV report using REUSE_ALV_GRID_DISPLAY . It shows the output correctly. But when I take the prin out or download to an excel sheet some fields are not there. Can I know how to solve this issue ?
    Regards,
    Beena

    hi Beena,
    If you are downloading the ALV output to excel, please make sure that the DDIC structure is passed as a parameter to the REUSE_ALV. I doubt you are creating field catalog from the program and that DDIC structure is not used.
    Hope this helps,
    Sajan Joseph.

  • 2LIS_02_ITM - Deleted items are not in the ODS 0PUR_O01

    Hello,
    We activated 2LIS_02_ITM extractor. We noticed that the deleted order items are not available in the ODS 0PUR_O01. SAP Note 578471 (Deleted positions in BW and statistics) explains that deleted items are not "statistical" relevant. However, this is an issue for us. Does anybody know if it's possible to change the behaviour of the extractor to keep deleted order items in the ODS ?
    Many thanks.
    François.

    Yes this is a known behavior in case of deltas.
    For Deleted line items Rocancel field will have an entry with R.
    To handle this you need to map ROCANCEL field in Technical group of transformation (Between Datasource to DSO) with 0Recordmode.
    Once you will do that then after activating the data in DSO it will nullify the records and deleted order or item will not appear.
    Regards,
    AL

  • My sent items are not in the sent folder

    I went to Preferences and chose to have sent items in the folder but they are not there. Anyone have any suggestions?

    Looking at the .mac mail folder, there are no black triangles, I have inbox, drafts and sent (and trash) icons.
    I tested the .mac mail (I know I keep saying "this site" but I don't know what else to call it?), and using this one it does keep a copy of the sent items. BUT using the Mail (the stamp icon mail) copies of sent items are not saved.
    I want to use the Mail one, because you can choose fonts and all that other stuff, which is why I even purchased the year membership! (otherwise I would just stay with Yahoo mail).
    I really don't have a clue about this stuff and I appreciate you taking your time here.

  • Some photos are rotated within the wrong orientation

    Hello fellow mac users, I am having a strange issue and would like your help.
    Following a corruption of my iPhoto database, I used a third party software to repair the database. I also did additional things like repair thumbnails, etc... I managed to repair the library but I am now having a strange issue.
    Portrait photos are rotated within the portrait frame. To repair, I need to swap the resolution in Photoshop:
    1. What I see in iPhoto.
    2. Rotated photo in iPhoto. This is obsviously distorted.
    3. Original photo after inverting resolution in photoshop...
    Is there a conveninent way to perform a batch repair without having to open every photo one by one in photoshop??? I hame probably more than 500 photos like that!!!
    Thanks in advance!

    The picture now looks fine in iPhoto (thumbnail is still wrong)
    Then try the following:
    1 - launch iPhoto with the Command+Option keys held down to open the First Aid window.
    2 - Run Option #2, Rebuild Thumbails.  It might take more than one try.
    OT

  • Residual items are created with the current exchange rate

    Hello,
    When a residual item is created due to a short payment for an invoice, the residual item is created with the exchange rate that is in effect on that day.  Is it possible to assign the exchange rate equal to the rate that existed on the original invoice.
    Thanks in advance for you ideas.
    Karla

    Hi,
    You can use transaction FB05 for doing the clearing there you would be able to input the exchange rate you need for clearing the AP/AR/GL items.
    But the exchange rate at the time of making/receiving the payment or at the time of clearing is what should be applied.
    Regards
    K.R

Maybe you are looking for