Menu Window Show button selected state icons not visible

Hello everyone. I am a new user of DSP3 (3days old), and I am not seeing the 3 Button state icons at the bottom of the menu window. Any help would be greatly appreciated. Remember I'm new, so be gentle.

This could be as simple as you not having a wide enough screen setting. Resizing the main work area from right to left makes those three buttons disappear before anything else. If you can, try expanding the area by dragging the bottom right corner out to the right some more.
If this isn't working, you may need to adjust your screen resolution so that you can see more window area even though things look smaller.

Similar Messages

Button "Selected State" bug confirmed for Blu-ray on Mac

I just confirmed today with Adobe tech support that, at the moment, menu button selected states are invisible on Blu-ray discs created with Encore on a Mac.
Meaning, if you have 5 buttons linked to 5 different places, the buttons will all work, but you will have no idea what you're selected on- because they are invisible! There will be no "highlight" or "selected" state for the button. Once selected, you will see the "activated state" for the button for a split second, then it will take you to the proper target track. But again, no way of knowing what buttons are selected.
They said if the video/menu assets are 4:3, the buttons work fine. Good to know, but a completely ridiculous suggestion.
At the moment, there is no solution. They are "working on it."
This is only a problem with Blu-ray projects on the Mac platform. Lucky me. To a hobbyist, this isn't a completely devastating problem- you can still watch the content of the disc. But this is enough of a problem for that I can't deliver it to clients like this. Wasted time and money troubleshooting this. This is a major problem.

Adam. When you see the LAYERS window, click on and off on your highlights. There is a small white looking box. Deactivate and activate this. This will activate the selected and activated states. We had this problem a long time ago and found this to be the solution!
DARREN

Spy menu only showing some items and properties not available

I am having some issues with the spy menu. In order to try and fix my issues I built the menu from scratch again on one of my pages. Everything works now on that page and when I upload it to the server, it is all there.
However, when I then copy and paste the menu to all the other pages and upload the the server, the submenu doen't show anymore. When I go and troubleshoot it and highlight the menu in its entirety and click properties, no properties will show. On the working page, this ation delievers me a properties bar where I can + or - menu items. Why is this? As this must be why the submenu is not showing either?
The page where everything works is this (See sub menu under coaching clinics) http://www.golifecoaching.com.au/go-beyond-registration-test but on every other page on this website, this submenu disappears.
Can anyone help? I am tearing my hair out and don't fancy having to build the menu from scratch for every page. There has to be a better way.
I use CS4 and this is my menu;
   <div id="navigation">
    
    <ul id="MenuBar2" class="MenuBarHorizontal">
      <li><a href="index.html">Home</a>        </li>
      <li><a href="what-is-coaching.html">What is Coaching</a></li>
      <li><a href="coaching-benefits.html">Coaching Benefits</a>        </li>
      <li><a href="do-you-need-a-life-coach.html">Do You Need a Life Coach</a></li>
      <li><a href="about-go-life-coaching.html">About Go Life Coaching</a></li>
      <li><a href="#" class="MenuBarItemSubmenu">Coaching Clinics</a>
        <ul>
          <li><a href="holdsworth.html">Coaching for Carers</a></li>
          <li><a href="coachingclinic.html">The Coaching Clinic</a></li>
        </ul>
      </li>
      <li><a href="contact-us.html">Contact Us</a></li>
      <li><a href="http://www.golifecoaching.com.au/blog">Blog</a></li>
    </ul>
        
Jen

That is brilliant, that is exactly it! Thank you sooooo much for your suggestion. I am so relieved.
Yes a template would be best, but I am not sure how to do that, so I am left with doubling my work evertime I make a change on this site.
Thanks Jen
Date: Sat, 13 Aug 2011 16:43:59 -0600
From: [email protected]
To: [email protected]
Subject: Spy menu only showing some items and properties not available
Disclaimer: I am new to coding in general and this is my first attempt to help someone.
I think the properties bar with the + - has to do with the javascript coding that is generated when you create a new tag, and it is located near the bottom of the page just before the closing body tag.
looks something like this:
<script type="text/javascript">
var MenuBar2 = new Spry.Widget.MenuBar("MenuBar2", );
</script>
so dont forget to copy that over too. Also, check the CSS that is associated within each page and make sure they are all in the same style.
P.S. Have you considered using a template for the menu bar so you dont have to copy it over each time?
>

Download button on appstore is not visible after I have upgrated IOS 7 in my Iphone 5

Download button on appstore is not visible after I have upgrated IOS 7 in Iphone 5, how can I fix it?

I am using iPhone 4S. Under iOS 7.04 everything was working fine. Now that I have updated to new 7.1 version, I am finding that the overall phone speed as been degregated.
Some times when answering the phone, you select to answer or swipe, it seems to hang up the phone. I end up missing the call.
Some times when I try to hang up the phone, it does not hang up right away. The phone appears to get stuck, you hear voices on the other end, but the call has not dropped. It takes a while for the call to drop and free up the phone.
Typing is slow. As you type, it does not show right away, only after 2 to 4 words have been typed then it will show all those characters.
Internet browsing is slow.
I mostly use the phone for 3 things - Making/Receiving calls, Texting, and Internet browsing. I don't play apps.
This is NOT a jailbrake phone, it's as original as it can get. I am hoping a fix is put into place. I have really lost faith in Apple's way of iOS upgrades. This is my 2nd regret in upgrading to new iOS.

Why are the jpeg icons not visible in finder when created by PS6

Why are the jpeg icons not visible in finder when created by PS6

hi
I have faced the same problem ... I didn't find the solution yet
but please visit this link http://www.oracle.com/technology/products/forms/pdf/webicons.pdf
you'll get everything you want to know
I'm not try it yet.
Best wishes

When hovering over button text it does not show button rollover state

Hi
I'm new to captivate and I'm looking for some help please. I have created buttons with Adobe Flash and saved them in PNG format, I have created an upState, overState and downState. These are working really well when I use them in Captivate. However when I add text to my buttons and rollover the text the buttons don't change state. They only change state when I hover over the button itself (a bit without the text).
Any help you can give me would be greatly appreciated.
thanks

No, if you cover up with text, and user clicks on text, the rollover state will not function.
I have another work flow for translation (have tutorials in several languages as well). In previous versions I used Photoshop to create buttons, using layers and having the Text layer separately, so that to translate I only needed to change that layer. But I created the regular Captivate buttons (needing three PNG's for 3 states).
In Captivate 6 I have almost replaced all butons by Smart Shapes used as button. Since the double as text containers, translating is now done in Captivate itself. But those shape buttons do not have a rollover functionality, can cope with that, I opt to show the hand cursor.
Really, cannot help you if you want to stick with Flash buttons that have to be layered under a text caption, unless you make the flash button transparent where the Text has to go, so that you can put the text under the Flash button.
Lilybiri

Video in button Selected state?

I'm rusty in DVDSP - been a couple of years since my last DVD menu project, but I have one now and the client has provided the menu art and description of what they want - but there are 2 items I'm not sure if I can include the way they want, and before I re-prep their art for Studio Pro (because, of course, it was prepped as if for print), I want to determine the best course to take, and reset their expectations, if necessary.
1) They want video to play in a button, but only when it is selected - I can drop video in using shapes, but it's playing in all states. I can't use a layered menu, because the background also is motion (subtle looping, but motion just the same). Thought maybe I'd build the motion in the buttons and mask over with a still in normal state, reveal in selected, but can't seem to get there. So any ideas, or am I spinning my wheels trying to accomplish?
2) They've prepped the buttons as if rollovers in a Flash presentation - the normal state has an image with a white border around it and title underneath - but the selected state has those as black PLUS a small arrow pointing at the title. I can't do a straight shape with text, because the arrow element will be present in all states. I can't do a layered menu because of the motion background. So what I've come up with is embedding the normal states of the button (white, without the arrow) into the motion background, and then create a shape with the text (black, with the arrow) but with only the highlight layer and no shape layer so that only the black highlight layer shows up over it when selected. This works, but I have to position it PRECISELY over the background normal button, or else white edges show and it gets ugly. So, is there a better way to do this that I'm overlooking?
Thanks very much to anyone who has taken the time to read this novel, and even more thanks to anyone who has some insight into any possible solutions (or lack thereof).

There is another way, but it's tricky.
You create a series of menus that are almost identical. In the first, all buttons show still images, and the button auto activates to a copy of the menu where the appropriate button shows a video. If you have four buttons, you'll need five menus all exactly the same except in the last four, single buttons have video, others are stills. Every button that is a still auto activates to go to the appropriate menu where that button has video. Every video based button links to the relevant track.
In practice, the user will see a still image, and when they select it (or roll over with a mouse if on a computer) the menu will jump to the associated sub menu where that button now has video and the others show stills.
The problem here is that on some (most) players there will be a pause between the menus, and it won't be a slick and quick change.
Using the masking technique is better in lots of ways, however as Drew said it will be hard to match the colours. Also, the mask shape will need to be your 'still' image (which might help obscure the colour differences) and this can only have four colours.
A further consideration is that the mask shape will be part of the button highlight (well.... it will BE the button highlight) and as such will exist in the subpicture stream. It is impossible to guarantee that this will stay in place or be in place when leaving or entering a menu. In effect, when you click a button the first thing to disappear is the sub picture stream, which means all of your videos will be visible for a fraction of a second, or perhaps slightly longer. Secondly, when entering a menu, the last thing to be created is the subpicture stream, which means that all of your button videos will be showing for a fraction of a second until they get covered.
The amount of delay in each case will depend on the player. For some it'll be tiny. For others it'll be seconds and will ruin the effect you are looking for.
I would probably prefer the delay as you change menus to the revelation of all the button videos, but you'll have to decide for yourself which is better!

Select Statement is not working

Hi All,
I am working on Master Data Text Datasource customer exit. Reading only restricted records using select statement if it is valid then those records move into I_T_DATA. If not they are not going to read.
I have written the following code .
Data : ls_rotextstr2 TYPE ROTEXTSTR2. '' Extrct Struct Name
*&Assigning values language and chart of accounts to variables
Data : lc_zspras TYPE SKAT-SPRAS VALUE 'E',
lc_Zktopl TYPE SKAT-KTOPL VALUE 'GCOA',
lc_zsaknr TYPE SKAT-SAKNR.
LOOP AT I_T_DATA INTO ls_rotextstr2.
gi_tabix = SY-TABIX.
SELECT SINGLE SPRAS KTOPL SAKNR FROM SKAT INTO
(lc_zspras, lc_Zktopl, lc_zsaknr)
WHERE SPRAS = lc_zspras
AND KTOPL = lc_Zktopl.
IF SY-SUBRC EQ 0.
MODIFY I_T_DATA FROM ls_rotextstr2.
ENDIF.
ENDLOOP.
Here select statement reading all records like other than 'EN" and 'GCOA' and going to Subrc condition.
Please some one take a look at the programme and tell me where I am making mistake. I just want the records that are language = 'EN' and Chart of Accounts = 'GCOA'.
Your suggestions are very help full to me,
Thanks
Ganesh.

Hi,
Try this..
types : begin of s,
spras type skat-spras,
ktopl type skat-ktopl,
saknr type skat-saknr,
end of s.
data i_t_data type standard table of s with header line.
Data : ls_rotextstr2 TYPE ROTEXTSTR2. " Extrct Struct Name
*&Assigning values language and chart of accounts to variables
Data : lc_zspras TYPE SKAT-SPRAS VALUE 'E',
lc_Zktopl TYPE SKAT-KTOPL VALUE 'GCOA',
lc_zsaknr TYPE SKAT-SAKNR.
*gi_tabix = SY-TABIX.
SELECT SPRAS KTOPL SAKNR FROM SKAT INTO
table i_t_data
WHERE SPRAS = lc_zspras
AND KTOPL = lc_Zktopl.
Edited by: Kamini Rawat on Mar 19, 2008 5:56 AM

Customer Exit --- Select statement is not working

Hi All,
         I am working on Master Data Text Datasource customer exit. Reading only restricted records using select statement if it is valid then those records move into I_T_DATA. If not they are not going to read.
       I have written the following code .
Data : ls_rotextstr2 TYPE ROTEXTSTR2. '' Extrct Struct Name
*&Assigning values language and chart of accounts to variables
Data : lc_zspras     TYPE SKAT-SPRAS VALUE 'E',
       lc_Zktopl     TYPE SKAT-KTOPL VALUE 'GCOA',
       lc_zsaknr     TYPE SKAT-SAKNR.
LOOP AT I_T_DATA INTO ls_rotextstr2.
gi_tabix = SY-TABIX.
SELECT SINGLE SPRAS KTOPL SAKNR FROM SKAT INTO
(lc_zspras, lc_Zktopl, lc_zsaknr)
WHERE SPRAS = lc_zspras
AND   KTOPL = lc_Zktopl.
IF SY-SUBRC EQ 0.
MODIFY I_T_DATA FROM ls_rotextstr2.
ENDIF.
ENDLOOP.
Here select statement reading all records like other than 'EN" and 'GCOA' and going to Subrc condition.
Please some one take a look at the programme and tell me where I am making mistake. I just want the records that are language = 'EN' and Chart of Accounts = 'GCOA'.
Your suggestions are very help full to me,
Thanks
Ganesh.

Hi,
Apply the following changes :
Data : ls_rotextstr2 TYPE ROTEXTSTR2. '' Extrct Struct Name
Data : lc_zspras TYPE SKAT-SPRAS VALUE 'E',
lc_Zktopl TYPE SKAT-KTOPL VALUE 'GCOA',
lc_zsaknr TYPE SKAT-SAKNR.
LOOP AT I_T_DATA INTO ls_rotextstr2.
gi_tabix = SY-TABIX.
SELECT SINGLE SPRAS KTOPL SAKNR FROM SKAT INTO
(lc_zspras, lc_Zktopl, lc_zsaknr)
WHERE SPRAS = lc_zspras
AND KTOPL = lc_Zktopl.
IF SY-SUBRC NE 0.
DELETE I_T_DATA INDEX gi_tabix.
CONTINUE.
ENDIF.
ENDLOOP.
hope it works...
regards,
Raju

MX:Button Selected State

I'm working on a bug https://bugs.adobe.com/jira/browse/SDK-16197 And trying to test a fix that I worked out, and now I'm realizing that I don't know when a button enters the "selected" state. I placed a trace statement in the setter function for selected, and I couldn't figure out how to get it to fire. I tried clicking, tabbing to it so it had focus, using space bar while it had focus.
When is a button considered selected?

A button must have toggle=true in order to stay in the selected state and will dispatch a CHANGE event when changing the selected property.
Alex Harui
Flex SDK Developer
Adobe Systems Inc.
Blog: http://blogs.adobe.com/aharui

Windows 7 Toolbar displays generic icon, not Acrobat icon

I hve used Acrobat forever. However, recently, the Windows 7 toolbar has been displaying only a generic icon, not the Acrobat icon, when the program is open. I have not discovered yet how to change the icon in windows 7 (Microsoft always tries to keep such things secret because they are control freaks).

How is the SD card formatted?
Maybe it needs to be in a format that the windows machine will understand, like FAT32.
Also here is a page which may be relevant: Change or Delete System Drive Letter via Registry to Remove Conflict USB or FireWire Drive Letter « My Digital Life

My select select statement seems not to work...

Hello experts,
I am having trouble with my select statement below. Here is what I need to do:
1. loop at itab it_equz.
2. get single asset number(ANLNR) and description(SHTXT) from table ITOB where EQUNR =_equz-equnr.
3. get single asset number(ANLN1), asset subclass(ANLN2 and subnumber(ORD42 from table ANLA where its asset(anln1) equals to the asset fetched by ITOB. (no. 2 step) and DEAKT eq '00000000'
4. Now, I would get all fields(select single) in table ANLC where ANLN1 equals to asset fetched by ANLA and ANLN2 equals to ANLN2 fetched by ANLA and AFABE eq '01'.
5.endloop.
Now, the problem is that I can't seem to get the right values in table ANLC. Now, my boss said that the values that I must get in ANLC must not be deactivated. So I did that by getting the required fields(no 3 step) in table ANLA where its DEAKT is equal to '00000000'.
Now, my select statement for ANLC seems not to work properly since I have the proper where conditions. Anyway, below is my select statement that I did:
LOOP AT it_equz. "no 1 step
SELECT SINGLE anlnr shtxt FROM itob   "no 2 step
          INTO (it_itob-anlnr, it_itob-shtxt)
          WHERE equnr = it_equz_dum1-hequi.
MOVE it_itob-anlnr TO it_finaltab-asset_dum.
            MOVE it_itob-anlnr TO it_finaltab-asset.
            MOVE it_itob-shtxt TO it_finaltab-description.
SELECT SINGLE bukrs anln1 anln2 ord42   "no 3 step
            FROM anla
            INTO (it_anla-bukrs, it_anla-anln1, it_anla-anln2,
                  it_anla-ord42)
            WHERE anln1 = it_finaltab-asset
              AND bukrs IN r_iwerk
              AND deakt = '00000000'.
MOVE it_anla-ord42 TO it_finaltab-asset_sub.
              WRITE it_finaltab-asset TO v_asset.
              CONCATENATE v_asset '-' it_anla-anln2
              INTO it_finaltab-asset_subnum.
SELECT SINGLE bukrs anln1 gjahr afabe knafa kansw "no 4 step
                          answl kaafa nafal aafav aafag
                          nafap aafap nafav nafag FROM anlc
                      INTO (it_anlc-bukrs, it_anlc-anln1, it_anlc-gjahr,
                            it_anlc-afabe, it_anlc-knafa, it_anlc-kansw,
                           it_anlc-answl, it_anlc-kaafa, it_anlc-nafal,
                           it_anlc-aafav, it_anlc-aafag, it_anlc-nafap,
                           it_anlc-aafap, it_anlc-nafav, it_anlc-nafag)
                        WHERE anln1 EQ it_finaltab-asset
                          AND anln2 EQ it_anla-anln2
                          AND bukrs EQ it_anla-bukrs
                          AND afabe EQ '01'.
it_finaltab-accq_cost = it_anlc-kansw + it_anlc-answl.
            IF p_posdep = 'X'.
              it_finaltab-acc_dep = it_anlc-knafa +
                                    it_anlc-nafav +
                                    it_anlc-nafag +
                                    it_anlc-kaafa +
                                    it_anlc-aafav +
                                    it_anlc-aafag.
            ELSE.
              it_finaltab-acc_dep = it_anlc-knafa +
                                    it_anlc-nafav +
                                    it_anlc-nafag +
                                    it_anlc-kaafa +
                                    it_anlc-aafav +
                                    it_anlc-aafag +
                                    it_anlc-nafap +
                                    it_anlc-aafap.
            ENDIF.
APPEND it_finaltab. CLEAR it_finaltab.
          APPEND it_equz_dum2. CLEAR it_equz_dum2.
          CLEAR it_itob. CLEAR it_anla. CLEAR it_anlc.
endloop.

Hi,
Please avoid selection in loop. it will lead to major performance issue.
avoid move statements ; instead use assignment.
1st :- select the entire data into internal table
eg:-
SELECT anlnr shtxt FROM itob
INTO table it_itob
for all entries in it_equz
WHERE equnr = it_equz-hequi.
1st select
2nd select.
2nd :- now loop on ur internal table to get the desired result.
it is good to work with internal table rather than select statements in loop.
Regards

Treeview Selected Node is not visible

Hi
I have below code snippet
                            TreeNode tn = TreeView1.FindNode(DefaultCustomFolderPath);
                            if (tn != null)
                            TreeView1.CollapseAll();
                            tn.SelectAction = TreeNodeSelectAction.SelectExpand;
                            tn.Selected = true;
This code was working fine when i was having Windows XP OS..
Now that the XP OS has been upgraded to Windows7, it is showing the collapsed tree view only i.e the selected node is not automatically displayed. If you expand the treeview to the selected node, it is selected/highlighted correctly.
Please help to solve this issue
Edit: I am using <asp:TreeView>

There is a different TreeView for every UI Technology (WinForms, WPF, ASP.Net). Plus several 3rd party TreeViews. Please specify wich one you use and ideall repost in the proper (sub)forum for the UI Technology.
Let's talk about MVVM: http://social.msdn.microsoft.com/Forums/en-US/wpf/thread/b1a8bf14-4acd-4d77-9df8-bdb95b02dbe2 Please mark post as helpfull and answers respectively.

The 'Add to Basket' button on Amazon is not visible. Occurs with earlier versions of Firefox and other websites.

On many websites, buttons are not visible but moving the cursor over them it changes to a hand so I know there is a button and the tooltip appears.
If I look at page info for the button it is shown as a transparent-pixel.

I have reset to Firefox defaults and problem has been fixed. Options>content>colours>allow pages to choose colours : if deselected, problem occurs, if selected it is fixed.

Update button in AAM ist not visible

Installations with AAM (Version 6.2) are done, but Updates are not available because the button ist not visible.
the DLM_Native.log shows this error:
[INFO] | | | | | | | 1356 | Update Session is created and key generated is {0C3B216B-CDCF-4DC3-87D0-1C220787ABED}
[INFO] | | | | | | | 1356 | Product Session is created and key generated is {73E75BBB-54CD-43C0-B2F5-F3FBFB0BE67A}
[WARN] | | | | | | | 1356 | Could not initialize CCM config sig file as XML data
[INFO] | | | | | | | 2612 | Failed to open event handle
[WARN] | | | | | UCErrorHandling | | 2612 | UCInitialize returned ErrorCode : 23
[ERROR] | | | | | DLMNative | | 2612 | Error occured in initializing updater. Error code: 23
[INFO] | {0C3B216B-CDCF-4DC3-87D0-1C220787ABED} | | | | | | 136 | No need to update AAM
System: Win_XP, 32-Bit

The problem is solved. The first time I installed the AAM our proxy was enabled. When I tried to install an application I got an download error (-60). With a disabled proxy I could install all the applications, but updates don't work.
So updates work, I have to disable the proxy and then install the AAM.
Thanks for your help...

Menu Window Show button selected state icons not visible

Similar Messages

Maybe you are looking for