Menus are displaying over the video and I have to restart Apple TV to fix it.  Anyone seen this?

I'm experiencing an issue with Apple TV that's annoying.  Every so often, when I start video (any video - movie or TV show) that menu doesn't fade out.  In other words, I see the Apple TV menu over top of the video, which is in the background.  The only recovery I've found it restarting Apple TV.  It's happening about 1 in 5 times starting video.  Anyone else experiencing this?  Is it a known issue?
I'm on release 6.1.1 (6698.99.19)

Hi brentdo,
I understand that sporadically the Apple TV menu doesn’t disappear when you play video content. In this situation I would recommend restoring the Apple TV back to factory settings and setting it up fresh. This step should help unexpected or inconsistent behavior within the Apple TV interface. The steps to complete this process are outlined in the following article.
Apple TV (2nd and 3rd generation): Restoring your Apple TV
http://support.apple.com/kb/ht4367
Restoring your Apple TV to factory settings
On Apple TV, choose Settings > General > Reset, and then click Restore.
Your Apple TV will restore to factory settings and will download and install the latest Apple TV software. This process may take some time. Do not disconnect your Apple TV's power cable during the restore process.
Thanks for reaching out,
-Joe

Similar Messages

  • Youtube suggested videos are showing over the video playing??

    When i go to youtube, i can't see the video playing properly and can't see the quality settings icon for the youtube suggested videos are showing over the video playing. Really annoying, i have to double click to fullscreen to change the quality settings.  How do i fix this?

    These installations and settings work for me:
    How to view/hear pretty much everything:
    Assuming you already run OS 10.4.9 or above and have Quicktime 7.2, and are using Safari 2 or 3, download and install (or re-install even if you already had them) the latest versions, suitable for your flavor of Mac, of:
    RealPlayer from http://uk.real.com/player/
    Flip4Mac WMV Player from http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx (Windows Media Player for the Mac is no longer supported, even by Microsoft)
    Perian from http://perian.org/
    Adobe FlashPlayer from http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash
    In Quicktime Preferences, under advanced, UNcheck Enable Flash, and under Mime settings/Miscellananeous only check Quicktime HTML (QHTM).
    In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them).
    The world should now be your oyster!
    You should also have the free VLC Player from http://www.videolan.org/ in your armory, as this plays almost anything that DVD Player might not.

  • Hello i have Iphone 5 but reccently it found the problem on lcd . there are somelines on the screen and i have a probelm with sms and dial No.s

    Hello i have Iphone 5 but reccently it found the problem on lcd . there are somelines on the screen and i have a probelm with sms and dial No.s

    Then you have to bring it back to the country you bought it from. Warranty is not International.

  • I have just reformatted my drive and reinstalled creative cloud and lightroom. When i open it, it says there is another version running the catalog and i have to switch to it to fix the problem, but there is no other version on my computer. Does anyone kn

    I have just reformatted my drive and reinstalled creative cloud and lightroom. When i open it, it says there is another version running the catalog and i have to switch to it to fix the problem, but there is no other version on my computer. Does anyone know how to fix this?

    Where did you put the LR catalog?
    Did you install the same version of LR, which one?
    OS and version?
    Open the folder where the catalog (*.lrcat) is located. If you see a file with lock in it while LR is not running, delete it.
    Now try to start LR again.

  • Ok i need to unlock my ipod but i don't know my password i use itunes but i need to update at the same time this srcews up the itunes and i have to restart the computer i need to restore the ipod please help

    ok i need to unlock my ipod but i don't know my password i use itunes but i need to update at the same time this srcews up the itunes and i have to restart the computer i need to restore the ipod please help

    Connect the iOS device to your computer and restore via iTunes. Place the iPod in Recovery Mode if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Maybe here:
    Trouble installing iTunes or QuickTime for Windows
    iOS: Device not recognized in iTunes for Windows
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

  • I am trying to download through Itunes the news iOS 4.3.3 software to my Ipod touch 4th G. it starts downloading just fine, but when it gets about 200mg into the 600 mg file, it comes back with stopped (err= -3259) has anyone seen this???

    I am trying to download through Itunes the news iOS 4.3.3 software to my Ipod touch 4th G. it starts downloading just fine, but when it gets about 200mg into the 600 mg file, it comes back with stopped (err= -3259) has anyone seen this??? I have tried downloading this at different times of the day, and have also tried it on different internet service providers ... still recieve same error msg...

    Try this article (disable firewall)
    http://support.apple.com/kb/TS2799

  • Is there a way for me to remove the video and just have the audio?

    I needed to record a conversation and I wasn't really thinking at the time and just used iMovie to record. I only need the audio. Is there a way to remove the video and have it made into just an audio file?

    Create a project using your conversation. Then Share it using Share/Export Using QuickTIme. Select an audio only format like AIFF, AAC, or MP3.

  • The transaction does not die after the kill and I have to restart Oracle

    Hi,
    I have this very hard issue with my production environment.
    A transaction started from java hangs after the user has closed the browser before the transaction was completed. The transaction remains in wait for "latch free" in v $ transaction.
    When the WebSphre is stopped the transaction is not closed. Neither the kill on Oracle or on Unix conclude the transaction. The restart of the DB is required.
    The rollback segment pointed to by the transaction is always the same. Although the procedure call by java is always the same.
    The database does not have performance problems and only one transaction per day waits for "latch free" and do not closed.
    The problem could be the rollback segment? Why Oracle is unable to resolve the transaction even if the client is dead and the WebSphere off?
    Regards,
    BingoBongo

    The average duration of the transaction is 10/15 seconds.
    When it lasts longer the client is closed and the transaction remains locked. But not always only in a particular case.
    From this moment the transaction is waiting for "latch free" and the value of the field USED_UBLK/USED_UREC does not increase and not decrease.
    The wait event is always the "latch free".
    The kill (Unix, Oralce) has no effect on the transaction.
    The rollback segment is always the same.
    The procedure call is always acts the same.
    The value of "SECONDS_IN_WAIT-WAIT_TIME/100" increases up to a certain point and then start over again.
    This is a snapshot of a transaction that requires restart of the DB:
    STATUS
    SECONDS_IN_WAIT-WAIT_TIME/100
    CR_CHANGE
    XIDUSN
    SECONDS_IN_WAIT
    WAIT_TIME
    STATE
    EVENT
    USED_UBLK
    USED_UREC
    OSUSER
    CLIENT_INFO
    ROW_WAIT_BLOCK#
    ROW_WAIT_OBJ#
    PROGRAM
    MODULE
    ACTIVE
    399,99
    178
    10
    400
    1
    WAITED KNOWN TIME
    latch free
    11
    738
    was5a
    0
    56204
    JDBC Thin Client
    JDBC Thin Client

  • 3rd generation Ipod Touch, after charging battery the screen now show to connect to itunes, will not do anything, anyone seen this or can help?

    Ipod touch 3rd generatio, after charging I turned on the device and it show to connect to itunes and is frozen will do nothing, any suggestins what might be wrong with this devise?

    I've had a similar problem with my older 3rd gen ipod touch. It could be the hardware. Try holding down the home button and on button at the same time for a couple of seconds or connect it to itunes for a bit. I also leave it alone for a while then it seems to unfreeze itself. Are you saying it's still frozen after you connect it to iTunes?

  • HT4059 How can I trsnfer CD books so disc 1 is followed by disk 2 and so on? now they are all over the place and not how I loaded them

    How can I load CD books so they are in sequence 1 followed by 2 and so on nowthe load so they are scattered all out of sequence?

    In Preferences check "scale strokes and effects"

  • Ever since I downloaded OS X Mountain Lion on my iMac, the Safari won't often (most of the time) and I have to restart to open a web page.  What is going on?  What can I do?

    Ever since I downloaded OS X Mountain Lion on my iMac, the Safari won't open.  It loads half way and then stops.  Same thing happens when we try to open a web page.  If I restart the computer, it will then work.  What is going on?  What can I do?  Help!

    It will but it's only a temporary fix, ideally you should get a large external drive and move your photo library to it, do this (info)
    Apple Menu>About This Mac>More Info>Storage, you will get a graphic that looks like the one below, post it here.

  • Internet connection is fine but sometimes pages won't load and I have to restart firefox before everything is okay why is this happening?

    Okay three times now I would go to a page I've already gone to (like my email) and suddenly Firefox will say it can't load it even though the internet connection is fine, the cookies settings are fine, and I can get to the site on Google and I can get to the Firefox Homepage. Everything turns out fine when I leave Firefox and then start it again. I never had this problem before I updated to Firefox 4. I want to know why this is happening and what I can do to stop it.

    Power off the router. Wait awhile. Power it back on. Wait until all the lights are lit up properly.
    Restart the computer.
    Start up in Safe Mode
    http://support.apple.com/kb/PH11212

  • My screens keep jumping all over the screen and changing size while I am trying to work why?

    My opened pages keep jumping all over the screen and changing sizes while I am trying to work - what is causing this?

    Madafk wrote:
    .... - I really love this Mac but it is taking a bit of getting use to
    Cheers
    You may find these Links helpful in enjoying your Mac...
    http://www.apple.com/support/mac101/
    http://www.apple.com/support/switch101/     Switching from PC
    Find Out How (Video)
    http://www.apple.com/findouthow/mac/

  • Skype goes offline and I have to restart my phone ...

    I have an LG G3, and it recently updated to 5.0.1.  Since it has updated, it seems like no matter what I do, my skype will go offline.  And once it shows me as offline, I either have to uninstall then reinstall the app or I have to restart my phone.  Any clues why?

    This has been happening to be as well since I updated the android software. 
    Any ideas why?

  • I'm on a windows laptop using iTunes sharing through the family to connect with Apple TV. After choosing the folder of photos to be shared and displayed on the appletv and when I choose to show on screen, they are not shown in the order they are in the or

    I'm on a windows laptop using iTunes sharing through the family to connect with Apple TV.
    After choosing the folder of photos to be shared and displayed on the appletv and when I choose to show on screen, they are not shown in the order they are in the original folder.
    How to pair show in a certain order, for example, sorted by name.
    grateful
    Julio Cesar

    Not that I'm aware of. You just export JPEG copies to a folder that you can point iTunes to. For instance, I have created a folder in my Pictures folder called Apple TV. And within that folder I have other folders of pictures that I can choose from in iTunes to share with Apple TV. But there doesn't seem to be any way to share a Lightroom slideshow. If you have laid to create a video file that would probably work. Apple TV is a little clunky in my opinion. Some things are a little more difficult to do now than they were a while back. I probably haven't provided you with much help, but just keep experimenting and I think you will figure it out.

Maybe you are looking for

  • IOS4 crash while checking voicemail

    I'm using a 16GB iPhone 4 running iOS 4.0.2. On occasion after I receive a phonecall and I get an indication for voicemail, I'll start the phone app and switch to visual voicemail. When I press the voicemail to listen to it, the app crashes back to t

  • No RAID or partition but won't install

    Hi. I have a 2008 2.53 GHz Intel C2 4G Macbook Pro.  I am trying to install mountain lion with no RAID or partitions.  However, it won't install because of the recovery feature.  I did it on my iMac with no problems.  Please help!!!  Thank you.

  • Parked Invoices Work Flow Logging Mechanism

    Dear ALL, From functional end how can we apply a release strategy on Invoice parking? Is there any separate logging mechanism of the release? We have developed standard work flow for logistic invoice verifications and as well for direct invoice parki

  • Signatures disappear when sending file attachment in iPad Mail

    Whenever I send an attachment from GoodReader or Pages the file appears at the bottom of the message and my default signature disappears.  How can I send files with a signature?

  • [SOLVED]find command not working correctly new version of findutils...

    After upgrading my findutils from 4.2.33-1 to 4.4.0-1, it is not working the way it used to. I downgraded to the old one and it is working fine again. However, I am wondering why the newer version can't do what I want it to... Typically I run the fol