Menus pop up when typing the same word in Koteri

When I type Japanese words again and again, a menu pops up with the kanji that I've used previously. How do I select this word from the menu so I don't have to keep typing? I've clicked on the word, and it doesn't do any good.

How can I include a picture so I can show you what I'm looking at?
If you do have the Japanese keyboard and fonts installed, please type sekigaisenn to get the characters 赤外線. Now type it again, and you should get a popup before you complete the word. That popup is the one in question and how do I tell the computer to select the word so I don't have to type it in full every time?

Similar Messages

When typing the existing words/letters are deleted?

When typing the existing words/letters are deleted?

Hi
Please find the link given below might help you to fix your issue.
HP and Compaq Desktop PCs - Wired Keyboard Troubleshooting (Windows 7)
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

TS4002 I'm trying to create a new apple-id but when typing the email adress I want to use I'm told that the particular email adress is not allowed but when searching I can't find same being used. How do I find out where that particular email adress is use

I'm trying to create a new apple-id but when typing the email adress I want to use I'm told that the particular email adress is not allowed When searching I can't find same being used anywhere. How do I find out where that particular email adress is used so I can delete it there and use it for my new apple-id?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Also
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.

When typing the name of the contact I want to send a text message to, names from my contact list no longer pop up as suggestions. Can anyone help me with this?

When typing the name of the contact I want to send a text message to, names from my contact list no longer pop up as suggestions. Can anyone help me with this?

There's always a way to reset the device jmn33! Thanks for keeping us in the loop. To process a full reset/restore on the device please visit http://vz.to/12TLCsR. Please keep us posted once this is completed, thanks!
MatthewS_VZW
Follow us on Twitter @VZWSUPPORT

Spell Check and changing multiple instances of the same word

Hi, sorry if this has been brought up before.. I can't seem to find any reference, so here's my dilemma:
My main writing language in Pages is Spanish and when it comes time for me to run the spell check, I usually have to change the same word a lot, because of missing accents and such. (I'd rather concentrate on writing and not worry about whether it has the right accent). Does Pages have any way to automatically detect when a word has been corrected, and pass the correction to any other instance of that word? I have tried using Find and Replace, but its not perfect, changing perfectly spelled words to include any corrections because the words, I think, appear similar. Is there a trick within Pages to do this? Does anyone know if the new version of Pages includes such a feature? Apple's iWork website and presentations fail to mention it...
Any suggestions will be appreciated.

I got it working, thanks es5f2000. I sat and thought about it and worked it out. (Pretty simple) Heres the code:
public void findWord()
         x = iTab.getEditorList(iTab.getIndex());
         try
           int index = x.getDocument().getText(0, x.getDocument().getLength()).toLowerCase().indexOf(tFindText.getText().toLowerCase());
           int index2 = x.getDocument().getText(0, x.getDocument().getLength()).toLowerCase().indexOf(tFindText.getText().toLowerCase(), x.getCaretPosition());
           if (index >= 0)
             System.out.println("found:)" + index);
             x.requestFocus();
             x.select(index, index + tFindText.getText().length());
             if(x.getCaretPosition() > 0)
               System.out.println("found:)" + index2);
               x.requestFocus();
               x.select(index2, index2 + tFindText.getText().length());
           else
             System.out.println("Not found:(");
         catch(BadLocationException ie) {}
      }

Simple Question - attribute alternative text within the same Word doc

ok. I am having a brain freeze and can't locate the answer in the OPA help. Simple question.
Is there a simple way to alias an attribute for use in Word?
For instance the following two conclusions create 2 attributes where I only want 1 attribute.
the annual percentage rate = 6
APR = the annual percentage rate
Is there a configuration option or something to alias APR as the annual percentage rate for use in Word? I want to use either in the same Word document. Something in my head tells me I saw that once before, but all of a sudden I have a brain freeze.
Sorry for such a simple question, but sometimes I get too deep in the weeds.

Hi Paul,
You may be thinking of the OPA legend style. In the Office 2007 OPM ribbon it's called Table Legend, but I believe it works with non-table rules in Word as well - it certainly used to.
It's an OPA rule style which can be used when you want to refer to a shorthand version of an attribute, e.g. "APR" instead of "the annual percentage rate". I believe it only applies to the rule immediately below where it has been set in the doc, and not the entire doc.
I did a quick search in the OPM Help and found references to the legend style, but I didn't find a description of the functionality (I didn't search too thoroughly though).
Here basically how it works...
Above the rule write the shorthand version, then the word "is", then the full attribute text, e.g.
APR is the annual percentage rateSide note: I always bold the "is" in the legend line. This is not required, but I like to do it because it makes it clearer at a glance which part is the shorthand and which part is the full attribute text.
Then apply the Table Legend style to the line, then put your Word table or regular rule below it, e.g.
[legend]APR is the annual percentage rate
the result = APR * 10 I use this functionality occasionally. Usually it's when I've got calculations in Word tables and I'm trying to make the left hand column more readable, e.g. using something "APR" in the formula so that it doesn't take up so much space.
Cheers,
Jasmine

How do you do a search for multiple occurences of the same word in a NOTE?

How do you search for multiiple occurences of a word in NOTES? I seem only to be able to find the first occurence and then it goes into a loop, never past the first occurence.

I want to find all the same words in ONE NOTE. It is a very loong list and I want to find all cccurences of a specific word in that one NOTE when I do a search. I thought I had solved this earlier today but now I can't seem to repeat it. I type in word in the SEARCH box, select the NOTE and then it shows me the FIRST occurence in that note, but only the first,

The message from ICLOUD saying that the IPAD hassn't been backed uo in 3 weeks... do not desapear when typing the OK. What to do?

The message from ICLOUD saying that the IPAD hassn't been backed uo in 3 weeks... do not desapear when typing the OK. What to do?

Try this and see if it helps.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up

I am using a Photoshop cs2, and I wonder if it is possible to keep the settings of the guidelines when closing an image, with the actual document ? It would be nice to have the guidelines locked down, I find it than when opening the same or another image,

I am using a Photoshop cs2, and I wonder if it is possible to keep the settings of the guidelines when closing an image, with the actual document ? It would be nice to have the guidelines locked down, I find it than when opening the same or another image, the guidelines are not locked, it is annoying to have to lock them down again. and it would actually be nice, to ba able to give specific directions when placing the guidelines. Thanks

Then why are the guides unlocked when I reopen a document that I saved with the guides locked ?
Thanks.

[svn:fx-trunk] 13501: Bug: BLZ447 - AMF3 Deserialization: Wrongly counted reference ID of duplicated String when in the same message there are Strings with only wildcards

Revision: 13501
Revision: 13501
Author:   [email protected]
Date:     2010-01-14 06:01:23 -0800 (Thu, 14 Jan 2010)
Log Message:
Bug: BLZ447 - AMF3 Deserialization: Wrongly counted reference ID of duplicated String when in the same message there are Strings with only wildcards
QA: Yes - please keep an eye on AMFX (HTTPChannel) tests.
Doc: No
Checkintests: Pass - except the usual 4-5 tests that time out on my machine.
Modified Paths:
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/channels/amfx/AMFXDecoder.as

Dear Pallavi,
Very useful post!
I am looking for similar accelerators for
Software Inventory Accelerator
Hardware Inventory Accelerator
Interfaces Inventory
Customization Assessment Accelerator
Sizing Tool
Which helps us to come up with the relevant Bill of Matetials for every area mentioned above, and the ones which I dont know...
Request help on such accelerators... Any clues?
Any reply, help is highly appreciated.
Regards
Manish Madhav

I just can't type plus when typing the phone number. Does anyone has this kind of a problem?

I just can't type plus when typing the phone number. 0 appears before the plus and it cannot be deleted.
I know few people who faced this situation.
Strange bug! How could it be unnoticed?

Hey Apple QA guys come on, fix that terribly annoying bug, please!
Env:
IOS 7+ (including freshiest 7.1 beta 3), all devices.
How to reproduce:
Open dialer app
Press and long hold "0" button
Expected:
On the finger down "0" digit appears in phone number line, after the long hold "0" dissapears and "+" appears in place.
Actual:
After the long hold "0" does not dissapears and "+" is added below. It makes international number dialing unavailable.
Workaround:
Quickly press backspace after the finger down to delete "0" before plus appears.

Why can't I translate between Swedish and Polish in the same Word document. This means I want to switch between two keyboards.

Why can't I get a Polish keyboard easily accessible from within my Word program? I have to choose it in Finder and then I can't switch back and forth between English/Swedish and Polish in the same Word document. Surely there must be a simple way of doing this by means of keyboard commands while I write, or do I have to go back to my old PC for that?
Ulf Magnusson

(1) You are talking about switching keyboard layouts, not about translating from Swedish to Polish or viceversa.
(2) The keyboard layout choice is not a function of the application (MS Word) in either Mac OS X or Windows; it is a system choice.
(3) Read
<http://docs.info.apple.com/article.html?path=Mac/10.7/en/mchlp2214.html>
specifically "Input source list" and "Input source shortcuts".
In short, you choose the three keylayouts you wish to use for English, Polish, and Swedish, respectively, and then you set the shortcuts you prefer to use to switch between them.
And it's all there, in the Help files, on your very own computer…

I want to do banners ,how can we do when click the same button (next button) it must show differen

i want to do banners ,how can we do when click the same button (next button) it must show different images . cam any one help

Check out my blog with samples on Edgehero.
http://www.edgehero.com/articles/interactivity

SOLAR01: Problem when entering the same T-Code twice

Hi all,
I am encountering a problem with Solution Manager 4.0, transaction SOLAR01.
When entering the same transaction code twice (in the Transactions tab) for a particular Business Process, I get the following error message:
"The specified key already exists"
Therefore, unless I flag the object for deletion (by selecting the row and choosing the "Delete Row" option), I am not able to proceed further.
Has anybody else encountered this problem and is there a proper workaround?
Thank you,
Orestis

Hi Jason,
Thank you for your post.
The reason for entering the same transaction twice is to test the sequence of the business process.
So, for a specific system integration scenario, I may need to create a customer in one transaction and return to that same transaction later to modify the customer (this is just an example). As one transaction may be used for different tasks at different points in time, I would like to reflect that sequence in the Solution Manager.
Kindly advise if you believe this is not the correct approach or if Solution Manager does not support this kind of "sequencing".
Thanks for your support!
Orestis

My computer is running slow and when typing the letters wait to show up. What can I do?

My computer is running slow and when typing the letters wait to show up. What can I do?

When was the last time you booted the system?

Menus pop up when typing the same word in Koteri

Similar Messages

Maybe you are looking for