Menus read 1 Gb in Build Tab when size is 100 MB. Why

I know there is a 30 second loop time limit in Encore and it's menus.
I did not like that becuase I like to play full songs over my menus and not have it stop and restart every 30 seconds.
I found a way around that by stretching the menus background in After Effects to meet the length of the song I was going to use.
It works great except for one thing.
When I render a 5 minute background to a menu in After Effects, it comes out to about 1.5 GB. I have 6 of these types menus in my project, so right away there is about 6 GB being used without having Encoded my 2 and a half hour wedding and put that in Encore yet.
This is a lot of space that could be used for making my wedding a little better quality.
So I decided to go back into After Effects and render out a 5 minute background to a menu at a much lower resolution.
It did work and I got it down a lot. almost down to about 100 MB.
I lost a little quality, but not so much that the average viewer would notice it.
I imported it back into Encore, and when I go to the Buid Tab, it still says that it's taking up 1.03 GB.
Why is that? It is just above 100 MB. Not anywhere near 1.03 GB.
Thanks in advance
Premiere Pro CS 5.5
Encore 5.5
After Effects 6.

Hi,
Here is how I do things.
I pick the menu from the Encore Librray and double click it and it goes into the Menu Monitor in Encore. This has a default of 30 seconds. That is Screenshot 1
I then pick my music, Import it as an asset, Drag it right on the menu. The duration of the song is then displayed in the Properties Tab in Encore. Let's say it's a 3 minute song.
I then pick my 35 -40 second Quictime movie that I am going to put into one of the film strip Video Drop Zones. I import it as an asset and then drop it into the menu into one of the drop zones.
I then go to Preview Menu, the menu opens up. I have to render it, after it renders the music starts to play and the videos start to play as well.
After 30 seconds, the Background of the menu goes black. the music and video still plays. P.S. I did not put a video in the dropzone for this screenshot, but this is exactly what happens.(Screenshot 3).
After the song ends 2 and a half minutes later, the background comes back up, the song starts again and the same thing happens after 30 seconds again.
So, what I am tryng to do is somehow, in Encore, not After Effects, is find away that the background won't go black at the end of 30 seconds when I have a song that is about 3 minutes or 4 minutes, or any length of time over 30 seconds.
Thanks again. I.m be looking out for your thoughts on this.
1) This first screen shot is of the menu with all it's layers when I first put it in Encore.
2) This screen shot is only of the background.
3) The last screen shot is what happens after 30 seconds:

Similar Messages

All of the App Tabs I have set when I quite Firefox did not open as App Tabs when you start Firefox again, why?

All the App Tabs disappeared when I opened Firefox after quitting. I understand that the App Tabs that I had set remains there if I close the browser and not quit. So does that mean that I have to create App Tabs every time I restart FireFox?

App tabs and Tab Groups (Panorama) are stored as part of the session data in the file [http://kb.mozillazine.org/sessionstore.js sessionstore.js] in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder]
* http://kb.mozillazine.org/Session_Restore
Make sure that you do not use [[Clear Recent History]] to clear the "Browsing History" if Firefox is closed because that prevails and prevents Firefox from opening tabs from the previous session.
If you use CCleaner then make sure that Session is unchecked in the settings for the Firefox application.

Firefox 4 closes the current tab when I close the laptop - why?

I've just upgraded to firefox 4. Now when I close the laptop the open tab disappears. This never happened with the older version.

See http://kb.mozillazine.org/Firefox_crashes and [[Firefox crashes]]
Set the pref [http://kb.mozillazine.org/browser.sessionstore.max_resumed_crashes browser.sessionstore.max_resumed_crashes] to '''0''' on the '''about:config''' page to get the about:sessionrestore page immediately with the first restart after a crash has occurred or the Task Manager was used to close Firefox.
See https://wiki.mozilla.org/Session_Restore#Preferences
http://kb.mozillazine.org/Browser.sessionstore.max_resumed_crashes
See also http://kb.mozillazine.org/Session_Restore#Firefox_keeps_crashing_after_restoring_a_session

Im having trouble with error 13019 I have read the previous discussions about this matter and have tried to do them except for the fact that under the music tab when clicking on my ipod every thing is frozen. It s not my comp. and i dont wish to restore.

Im having trouble with error 13019 I have read the previous discussions about this matter and have tried to do them except for the fact that under the music tab when clicking on my ipod every thing is frozen. It s not my comp. and i dont wish to restore. Please help!

If you are wondering why you are not getting any responses, it is because you have vented a complaint without any details that make any sense or give anyone something to work on.
If you want help, I suggest actually detailing what has happened, with versions of software etc. Anything that would let us assist.
As a start I am guessing that you have not really got the hang of "How it all works". Firstly download the Pages09_UserGuide.pdf from under the Help menu. Read that and view the Video Tutorials in the same place. A good addition would be the iWork 09 Missing manual book and something to help you learn how to use your Mac.
If there are specific tasks you need help with:
http://www.freeforum101.com/iworktipsntrick/index.php?mforum=iworktipsntrick
Is a good resource.
Peter

I am unable to purchase anything because " I do not have the correct privelages".But when I check in properties and the security tab, everything seem to be checked. Also the read only box is checked and when I uncheck it seems ok but it has not unchecked

I am unable to purchase anything because " I do not have the correct privelages".But when I check in properties and the security tab, everything seems to be checked.
Also the read only box is checked and when I uncheck it seems ok but if I check again it is still checked.

Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you.

Missing all menus and buttons from Folio Builder

I had a problem with Folio Builder panel when change ID password. I re instal both plugin again( FP and FProdTool), but this did not help. After reading the forum about solving the problem >
1) Quit InDesign and any other CS apps
2) Use the Activity Monitor to quit the CS5ServiceManager or CS5.5Service Manager
3) Next delete this file based on version:
/Users/lnegi/Library/Application Support/Adobe/CS5ServiceManager/preference/csxs2.pref
/Users/lnegi/Library/Application Support/Adobe/CS5.5ServiceManager/preference/csxs2.pref
4) Then remove this item from the Keychain Access based on version:
Adobe-CS-5-renga
Adobe-CS-5.5-renga
To remove from the keychain:
Navigate to /Applications/Utilities and launch the Keychain Access.app
If the lock icon in the upper left appears locked, click on it and enter your password to unlock it.
Select the “login” item in the Keychains list in the top left.
Select “Passwords” from the category list.
Type “renga” in the search field in the top right.
Select any matches and press the delete key.
>>>>I followed the advice. But after that , Folio Builder panel has stopped working, missing all menus and buttons from FBpanel. Please help solve the problem!!!

i'm disappoint ...after the second day, I can not work with my DPS.. afte trying this:
1. Uninstall Folio Builder Panel and Folio producer Tools ( Seems you might have already followed this step). Use Spotlight to serach for Uninstall Folio builder Panel and Uninstall Folio producer Tools and then uninstall repectively.
2. Uninstall Adobe Air.
3. Restart your Machine.
4. Reinstall Adobe Air from get.adobe.com/air
5. Reinstall Folio Builder Panel and Folio Producer Tools.
>>> Folio Builder panel again does not appear!!! The Panel yesterday behaved strangely, one moment disappeared, then appeared( but with а blank window)....what am i doing wrong!? ...When I first time instal DPS, it also had problem after a older versions of DPS, but the problem eventually decided. Now I instal the last versions plugins HEEEEELPPPP!!!!

How do I only execute code in a certain tab when that tab is selected?

I want the code inside one of my tabs to only run when that tab is selected. I'd like to read the value of the tab chosen to compare it to a constant (that tab), and if true, run it. I don't know how to read the value of a tab selector though, I don't understand the structure.
Solved!
Go to Solution.

Ravens is absolutely right. Don't over-engineer your code. Sections of code
should run when needed and should not depend on a mostly cosmetic
feature on the front panel.
Still, you can wire the tab terminal directly to a case structure.
You can also listen for a "value changed" event of the tab control.
LabVIEW Champion . Do more with less code and in less time .

At one point, I accidentaly chose to always save tabs when exiting. i fixed this by reseting browser.startup.page to 3; however, while it now asks me, even when i click no it never opens the next session to my homepage, only to what the last tab was.

When trying to close multiple tabs, mozilla warns me and asks if i want to save. Even if I click no, the next time mozilla opens it opens to the last open tab of the previous session. If there is only one tab open when i close firefox it does not ask me, but will still load that tab when firefox next opens.

So, I fixed it...but I'm not quite sure how. I compared, line by line, my about:config with the one on my houses main computer...only did about two screen's worth, but I changed some values to match the other computer and the problems gone!

My firefox won't create a new tab when I click on the tab. It will create a new window. It worked fine till this morning. I've rebooted several time to see if that would make a difference. It doesn't.

I can only create tabs by clicking on a link in an email or a program or a link in the window I am viewing. It will NOT create a new tab when I click on the tab to create a new tab, nor will it create a new tab when I right click on the tab & click on create a new tab. I'm used to using tabbed browsing all the time & it's driving me nuts. HELP!
I have not downloaded any new updates on any software or downloaded any new software in the hours before this started happening.
Just to clarify about my original question. I meant to say that firefox will create a new window when I right click & click on create a new window but will not create a new tab when I click on create a new tab. I think what I wrote may have been somewhat confusing.

Do you have that problem when running in the Firefox SafeMode? 
[http://support.mozilla.com/en-US/kb/Safe+Mode] 
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: 
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

How do I save the open tabs when I close Firefox 5? There should be a dialog box opens that asks if you want to do this. Without it I will stop using Firefox.

This was available in earlier versions and was a great feature. Please restore it or give us a workaround.

It seems that they decided to disable this feature by default for some reason. In your address bar, type in "about:config" and search for browser.showQuitWarning" in the filter, without quotes. Double-click this string to set it to "true." Firefox should then ask you if you would like to save and quit, or just quit, when exiting with multiple tabs opened.
Another option is to go to the "General" tab in your preferences and and under "Startup" -> "When Firefox starts," select "Show my windows and tabs from last time" from the drop-down list. This way, your opened tabs are always saved, and always restored.
Finally, you can achieve this functionality (and more) with the Session Manager add-on. Session Manager is nice because it allows you to save and restore multiple tab sessions. I also find that it's a more reliable fail-safe for saving your opened tabs when it comes to browser crashes.

How do I set Safari to prompt before closing multiple tabs OR reopen all of the closed tabs when when I relaunch the application? The "Reopen all windows from last session" is unselectable.

How do I set Safari to prompt before closing multiple tabs OR reopen all of the closed tabs when when I relaunch the application? The "Reopen all windows from last session" is unselectable.

It would seem if your choose "Show my windows and tabs from last time" '''''and''''',
*when you last closed Firefox, you had no web site open (just a blank tab), that it would open just that blank tab
*when you last closed Firefox, you had one or more tabs/web site open, that would allow you to "Restore Previous Session"
#Have you tried that?
#If so, what is happening in each circumstance when you reopen Firefox?
'''Restore Previous Session''' 
Open tabs are automatically saved when closing Firefox beginning in Firefox 4. To open your last session, after Firefox starts, click History > Restore Previous Session. For this to work
#You must be remembering history (Options > Privacy > Remember my browsing history).
#*See [https://support.mozilla.com/en-US/kb/Options%20window%20-%20Privacy%20panel Options window-Privacy panel]
#You must not be using Private Browsing or permanent Private Browsing
#*See [https://support.mozilla.com/en-US/kb/Private%20Browsing Private Browsing]
#You must not use Clear Recent History or Clear history when Firefox closes
#*See [https://support.mozilla.com/en-US/kb/Clear%20Recent%20History Clear Recent History]
#*See [https://support.mozilla.com/en-US/kb/Options%20window%20-%20Privacy%20panel Options window-Privacy panel]
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]

Cancelled contract lines are populating in the SR form's subject tab when clicking on 'Get Contracts' button

Cancelled contract lines are populating in the SR form's subject tab when clicking on 'Get Contracts' button. But user says, it should not be populated. What could be the reason? Please suggest.
I have told the user :
"In the case of a renewed contract, if the service request is logged during the effectivity of the original contract (which is now Expired), the original contract will be retrieved. If the service request is logged during the effectivity of the renewal contract then only the renewal contract will be retrieved.
Contract Entitlement on Subject tab is based on Contract Start and End dates. All the contracts i.e. expired, active, cancelled will appear until the end date. As we can see the contract ES-10165 is end dated on 09-DEC-2014, hence it will appear on the subject tab as per the functionality."
But the User is saying:
"Contract coverage is clear to be based on dates, and that is quite clear to me as well… the problem comes with the different statuses.
A SR can be associated to an “EXPIRED” contract line because the SR creation date could be falling between coverage line start and end dates, but can never be related to a “CANCELLED” line.
This “CANCELLED” status means that the line is not valid for the contract, so if it is not valid for a contract, it is not valid for referencing a job…and this is only creating wrong costs associations."

Hi Sudhakar,
Drop inline message components for each of the textFields and the textArea and then run the application. You could also use a message list component but inline message components for each of the input components would give you a clear idea if any errors are occuring. In case any such errors are indeed occuring then the situation can be analysed further.
Hope this helps
Cheers
Giri :-)

I am unable to see any POP3 or IMAP tab when I set up an account in my iphone 4S. Hence by default all my email accounts become IMAP and the messages are deleted from the server when I delete them from the iphone.

I am unable to see any POP3 or IMAP tab when I set up an account in my iphone 4S. Hence by default all my email accounts become IMAP and the messages are deleted from the server when I delete them from the iphone.

ok sorry everyone but i solved it myself but the solution is so nuts i've posted it here to help others who have the same problem.
to setup a comcast imap account on your iphone:
go to mail, contacts, etc in settings
under accts, select add account
select "other"
new screen, choose "add mail account"
now on the new acct screen you must enter your name, email address and password for your GMAIL acct ! (yes i said your gmail acct !, or some other acct with a NON comcast address).
hit next
then the acct verifies
when verified a screen will open with all the acct settings for this acct AND @ the top of the screen are the 2 buttons > imap or POP
select imap and THEN CHANGE ALL THE ACCOUNT information to the comcast account !
then hit next and the account will take a couple minutes to verify but it will verify and now you have a comcast imap acct set up on your iphone. The problem must be that when the iphone sends the initial verify acct info to comcast (if you enter that information first) the comcast server is simply not setup yet to signal the iphone that there is an imap option.

Firefox is not letting me open another tab when I click the 'new tab' button. It says 'done' in the corner, but never opens a new tab.

Firefox is not letting me open another tab when I click the button or the 'new tab' in file. I have restarted my computer, installed an update, and I still have the same problem browsing.

In past threads, this problem has been linked with the Ask toolbar.
[http://support.mozilla.com/en-US/questions/784371 I can't open a new tab anymore; what happened? | Firefox Support Forum | Firefox Help]
[http://support.mozilla.com/en-US/questions/788008 New tab button does not work, nor does "Open New Tab" toolbar icon. | Firefox Support Forum | Firefox Help]
And several users mentioned a link between Foxit Reader and Ask toolbar:
[http://support.mozilla.com/en-US/questions/786427 "Open a new tab" is not working in Firefox 3.6.13 on WindowXP NT | Firefox Support Forum | Firefox Help]
[http://support.mozilla.com/en-US/questions/794912 I can't open a new tab | Firefox Support Forum | Firefox Help]

The "+" appears on the left side of the open tabs, when I re-open a closed window. The tab that should be first on the left doesn't have a tab!

The "+" appears on the left side of the open tabs, when I re-open a closed window. The tab that should be first on the left when the window is re-opened doesn't have a tab! If all the other tabs are closed, the webpage appears, but still has no tab! If more tabs are then opened, it is again inaccessible without closing all tabs!

In Finder, go command - F. On the top left set "Kind" to Date Created, finish selecting the criteria and hot "Save" on the top right. You'll get a new smart folder with an option to add it to the sidebar.

Menus read 1 Gb in Build Tab when size is 100 MB. Why

Similar Messages

Maybe you are looking for