Menus that open UP instead of down

The site I am putting together in Flash CS3 has two menu
headings at the bottom of the page. I know that usually the menus
are at the top or on the side, but in this instance, they have to
be at the bottom. That being said, when a user rolls over "Entry
1", s/he should activate a vertical menu containing about six
items. The menu should open UP so as to not break the frame with a
drop-down menu. Once the menu is open, the user can click on one of
its entries and navigate to a new page. Can someone here please
help, or direct me to some code that does this?
Thanks,
Andrew

If you'd like something a bit more polished and fully
automated, open
upwards is a GUI option checkbox for PMM2:
http://www.projectseven.com/products/menusystems/pmm2/pipes.htm
Al Sparber - PVII
http://www.projectseven.com
The Finest Dreamweaver Menus | Galleries | Widgets
http://www.projectseven.com/go/pop
The Ultimate DW Menu System
"brad_goldstein" <[email protected]> wrote
in message
news:gp42nu$poo$[email protected]..
> hi,
>
> i'm looking for a jQuery plug in sort of like this:
>
>
http://javascript-array.com/scripts/jquery_simple_drop_down_menu/
>
> but i'd like it to go up instead of down. and instead of
a solid
> background
> i'd like to add some opacity to it. anyone seen anything
like this?
>
> thank you.
>

Similar Messages

  • Muse Accordion tab - opening up instead of down.

    I have a working accordion widget with about 10 tabs. 
    Suddenly noticed that two of the tabs are opening UP instead of DOWN....
    meaning that the tab is at the bottom of the open panel instead of at the top as I would prefer.
    At one time all were opening DOWN with the title tab at the top of the open panel...
    but now those few are different and I dont know what i did and cannot find
    a MUSE control for the behavior.
    Dreamweaver help articles refer to controls that do not seem available in MUSE.
    Any direction appreciated.
    Thanks.
    MP

    Hello,
    When you say the tabs are opening up UP instead of DOWN, are you talking about the design view of Muse or in the preview/publishes site?
    Could you please provide us a link to your site where we can see the issue?
    Regards,
    Sachin

  • Prior to upgrading to 9.5, I used to be able to open several different PDF's in one Adobe Reader.  Each document would have it's own tab across the toolbar.  Now I don't have that open.  Instead, I have multiple Adobe Readers open at the bottom of my scre

    Prior to upgrading to 9.5, I used to be able to open several different PDF's in one Adobe Reader.  Each document would have it's own tab across the toolbar.  Now I don't have that open.  Instead, I have multiple Adobe Readers open at the bottom of my screen.  Any suggestions on how to change that?  Thanks!

    Not possible with the actual versions of Adobe Reader.

  • I just installed Yosemite. iPhoto is gone, and Photos does not open.  Instead, I am prompted to update to the latest version. The App Store tells me that is not available in the US.  What do I do?  Cannot access any photos.

    I just installed Yosemite. iPhoto is gone, and Photos does not open.  Instead, I am prompted to update to the latest version. The App Store tells me that is not available in the US.  What do I do?  Cannot access any photos.

    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Reinstalling OS X Without Erasing the Drive
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list.  Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Download and install the OS X Yosemite 10.10.3 Combo Update.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Alternatively, see:
    Reinstall OS X Without Erasing the Drive
    Choose the version you have installed now:
    OS X Yosemite- Reinstall OS X
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • How can I change my f4 button so that it opens launchpad instead of dashboard?

    I recently bought a new macbook pro but had restored it with my old macbook restore file. Doing this made my f4 key open dashboard instead of launchpad. Is there a way to change it so it opens launchpad?

    With VPN software installed on your Mac all connections to the net will go through that VPN. you have to shut the VPN down for your normal traffic to go directly out to the net. That is just how it works.
    Let me add that is the point of a VPN. So everything done on the computer goes through a Virtual Private Network to your workplace. Otherwise your computer could expose the work network to malware you might get from the Net on your computer.

  • How to remove black "blocked plug-in" window that opens with iPhoto. It covers iPhoto and everything under it. I've right and left clicked the black window, restarting the computer, shutting down the computer, but the window always appears when I ope

    How to remove black "blocked plug-in" window that opens with iPhoto. It covers iPhoto and everything under it. I've right and left clicked the black window, restarting the computer, shutting down the computer, but the window always appears when I open iPhoto and it will not move or go away. It stays on my screen (covering my desktop icons) even after I quit iPhoto. How can I get it off my screen?

    Which version if iPhoto and MacOS X do you have?
    Do you have any iPhoto plug-ins  installed?
    Open the folder /Library/Application Support/iPhoto/Plugins/
    To navigate to that folder, open the folder "Library" directly on your Macintosh HD, then inside the Library folder go to Application Support, then iPhoto.  Is there anything installed?

  • In develop "mode" and I can't locate my "Basic" slider that opens up my "Treatment" sliders. There's not even a drop down arrow to Minimize and open. I was working in it and the next moment it was gone. I'm in Lr 5 using a trackpad. Seems like the issue c

    In develop "mode" and I can't locate my "Basic" slider that opens up my "Treatment" sliders. There's not even a drop down arrow to Minimize and open. I was working in it and the next moment it was gone. I'm in Lr 5 using a trackpad. Seems like the issue came up while using my trackpad. Any thoughts?

    In the Develop Module, you right-click on one of the other Panel Headers (for example, Tone Curve) and then place a check next to Basic

  • Lately(2013) when i click a link in Firefox, the window that opens is maximaized instead of half or quarter sized like it has always been. why? fixes?

    Just recently May 2013, when I click on a link that opens a new window, the window opens as maximized instead of the reduced size it normally does. why? I can't find any support for this issue. I am operating Windows 7 with service pak 1. And using Firefox 21.0. is this a bug? how do I fix it?

    That worked perfectly. not sure how i pressed f11, but thank you so much!

  • Lately, whenever I open a link in a new window, when that window opens it immediately minimizes down to the task bar. This is obviously annoying.

    Lately, whenever I "open a link in a new window", when that window opens it immediately minimizes down to the task bar. This is obviously annoying.

    Hi BigBinAz,
    Try to start firefox in [https://support.mozilla.org/en-US/kb/troubleshoot-extensions-themes-to-fix-problems safe mode], and in [http://kb.mozillazine.org/Safe_mode#Safe_Mode_options Safe Mode options] select ''Continue in Safe Mode'', don't make any changes in safe mode, and check it again.
    '''EDIT''' : "select ''Continue in Safe Mode'', don't make any changes in safe mode" '''there is not an option any more, the safe mode options don't exist any more''', so don't search for safe mode options.
    thank you

  • Hello! Can't open an IDML file. ID file was created in CC (10). It is a 100 page (50 spreads) doc that is one big table. It was created in CC (10) and saved as an IDML file. I have CS6 and when I try to open it, it shuts down ID almost instantly. The file

    Hello! Can't open an IDML file. ID file was created in CC (10). It is a 100 page (50 spreads) doc that is one big table. It was created in CC (10) and saved as an IDML file. I have CS6 and when I try to open it, it shuts down ID almost instantly. The file was created on a MAC and I am trying to open it on a MAC. Any/all advice is greatly appreciated as I am up against a deadline with this unopened file! Many thanks in advance, Diane

    There's a good chance the file is corrupt. As whomever sent it to you to verify it opens on their end.

  • I am john and I need help downloading a progmmme yesterday and wanted to finish downloading open it and I am not told me that the program was shut down unexpectedly and restart ponia not opened and went back to download it and not opened my back probe to

    i am john and I need help downloading a progmmme yesterday and wanted to finish downloading open it and I am not told me that the program was shut down unexpectedly and restart ponia not opened and went back to download it and not opened my back probe to turn off the computer and there was no case

    i am john and I need your help yesterday bought a program called DJAY when I finish the download and got an error opened and I saw him there was no case to install and thank you for your help anyway

  • After allowing windows media player as the main player Itunes doesn't open anymore.Instead I get a message that itunes can't start because msvcr80 is not installed on my computer.??

    After allowing windows media player as the main player Itunes doesn't open anymore.Instead I get a message that itunes can't start because msvcr80 is not installed on my computer.??

    Hello Ezettera
    Check out the article below on troubleshooting iTunes start up issues. You may need to start up in Safe Mode or even remove iTunes and its associated software and reinstall iTunes.
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    Regards,
    -Norm G.

  • How can I remove viruses off my computer? I have mac OS X, but I clicked on a website on google and it didn't open. Instead the security program popped up and said that my computer is at risk of a crash and has detected several viruses!?!?! AAAAHHH!?!?!

    How can I remove viruses off my computer? I have mac OS X, but I clicked on a website on google and it didn't open. Instead the security program popped up and said that my computer is at risk of a crash and has detected several viruses!?!?! AAAAHHH!?!?!

    MnM
    It's probably the MacDefender scareware trojan horse. If you have this here is how to remove it.
    1. Open Activity Monitor look for MacDefender process double click on it and hit quit or force quit.
    2. Go to System Preferences, Go to accounts, Go to login items look for anything related to MacDefender hightlight it by clcking on it once. Then hit the minus sign to remove it.
    3. Go to applications folder and drag MacDefender to the trash.
    4. Open finder and do a search for Macdefender and remove anything you see related to MacDefender.
    5. Open Spotlight (the little magnyfing glass in the menubar far right corner) and do a search for MacDefender.
    6. Restart your computer and empty trash.
    7. If you feel you need to have virus protection for your Mac use ClamXav. It's the recommended AV program for MacOSX. Hope this helps.
    Joseph

  • I would like the window that opens with a new tab to be my home page. Instead it's YAHOO and I don't like it. How do I fix this so new tab is homepage?

    When I Ctrl+t to get a new tab it opens with YAHOO as the page. I would like it to open my HOMEPAGE.

    You can look at one of these extensions:
    * NewTabURL : https://addons.mozilla.org/firefox/addon/2221
    * New Tab Homepage : https://addons.mozilla.org/firefox/addon/777
    You may need to check other extensions if they are overriding the page that opens in a new tab.
    If you have AVG software then see:<br />
    AVG Antivirus and Security Software - AVG Security Toolbar Help New Tab Search<br />
    http://www.avg.com/special-toolbar-how-to-disable-search-tlbrf.tpl-mcr1\

  • I just bought a Dell Precision M3800 laptop - screen res 3840 x 2160  when I open photoshop the task bar and tools and layers etc are in 4pts size   I changed my % in my image in my control panel and if I go to open file the drop down boxes are in good pt

    I just bought a Dell Precision M3800 laptop - screen res 3840 x 2160  when I open photoshop the task bar and tools and layers etc are in 4pts size   I changed my % in my image in my control panel and if I go to open file the drop down boxes are in good pt sizes  how do I make the layers and tool bars bigger?  Please help@

    Windows will scale applications display or windows will not scale application display depending on how the application is coded.  Photoshop is coded in a way that its display is not scaled by windows.  Photoshop knows about your displays high pixel count not its resolution  so it uses its pixels  however it does not scale its UI to make it usable on your display.  Other application let Windows  scale their display output.   For example Microsoft default for is Surface Pro 3, 216 ppi display is to scale applications display up 150% so the surface pro 3 display which has 2160x1440 pixels a 216 ppi resolution look like at display with the user is using with 1440x960 pixels.  The Application works like the display is 1440x960 and Windows scale those pixels to the displays using the displays  2160x1440 pixels the effectively changing it resolution to 144ppi rather than the actual 216ppi.
    The reg update  and external manifest file  effectively tells photoshop its working on such a size display display some number of pixel wide and some number photoshop uses that as the display size  in turn Windows scale those pixels to use the displays 2160x1440 pixels efector lowing its 216ppi resolution.  Photoshop CC 2014 2X UI would be like using windows 200% option applications would be shown the are working on a display 1080x720 instead of the Surface Pro 3 2160x1440. Note that 1080x720 does not meet PS requirement of 1024x768.  Photoshop UI would not fit on the Surface Pro 3 display..
    Since you have a 4k display if you have CC 2014 you can use its 2x UI effectively Photoshop will be running on a 1920x1080 display and have half the resolution of you 4K display  3840x2160 pixels four native pixels are use as a single pixel.   1920x1080 pixels exceed PS requirement.

Maybe you are looking for