Menus.xml issue

I'm trying to install Dreamweaver and i keep getting
menus.xml errors i've renamed the .bak files to menus.xml
reinstalled a ews times and redownloaded. I'm lost now any
ideas?

Has anyone posted a resolution to this problem yet? I
downloaded the trial installation file from the adobe.com website.
After installing only Dreamweaver CS3 to my system, I got the error
"Dreamweaver encountered problems while constructing the menus from
the current menus.xml file. Please delete the current menus.xml
file and rename menus.bak to menus.xml."
I've done that several times and get the exact same error. I
installed Dreamweaver CS3 on a different computer using the same
installation file and it works perfectly fine. So I copied the
Dreamweaver directory from that computer and replaced the
malfunctioning directory with the functioning one, but that didn't
fix the error either.
Any assistance in this would be greatly appreciated in this
as our company is looking to purchase this product although not
being able to get it to work does pose a problem.
Thank you

Similar Messages

Menus.xml issue when trying to launch Dreamweaver CS4

I have used Dreamweaver CS4 for many years on my Mac. I had a drive failure and have had to reload all of my applications from scratch as there seemed to be an issue with the Time Machine back up. Everything is working well apart from Dreamweaver CS4 which brings up an error message telling me to delete my menus.xml file and rename menus.bak to menus.xml which just doesn't work.
I have checked and this has been asked before but none of the previous answers that I could find will work for me. Any new ideas?
Apple MacBook Pro (mid 2010 model) running bang up to date version of OSX Mavericks.

dg28 wrote:
Thanks Preran
One issue appears to be that Dreamweaver has loaded the help and configurations files into a folder in applications rather than in application support. I do not have a Dreamweaver CS4 folder anywhere in applications support under my identity or than of the loacl admin.
You need to turn on your hidden folders to see it.
http://guides.macrumors.com/Viewing_hidden_files_on_a_Mac

After migrating to new Mac Pro Dreamweaver won't launch, says missing menus.xml file. How do I resolve this?

After migration to a new Mac Pro Dreamweaver CS6 won't launch. It says it is missing menus.xml file. How do I resolve this?

Hi rustyg12,
Go to Applications/Adobe Dreamweaver CS6/Configuration/Menus/menus.bak
You'll see a menus.xml there - it is a backup copy of the actual menus.xml file that DW uses.
Copy it from that folder, paste it 1 level above (in Menus folder).
Fire up DW. See if it works.

JavaScript error in menus.xml

I'm working with DW 8, and some template files created in DW
MX2004.Has anyone experienced the following error when closing old
template files?
While executing DWMenu_File_Close command in menus.xml, the
following JavaScript error(s) occurred:
Exception thrown in native function.
I've gotten a similar error before, but it had to do with
imbedding library items inside template pages. But, all of those
had been created in DW MX2004. Any ideas?

You can find anything you want on these forums or on the
internet. The
question is - is it credible. This one is not.
What extensions do you have installed?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"safetypin" <[email protected]> wrote in
message
news:[email protected]...
>I was looking around the forum a little, and I found
someone talking about
>how
> it was related to the fact that there was javascript on
the page. I opened
> each
> template file, removed the link to the javascript
(nothing was embedded),
> saved
> it (it crashed), reopened dreamweaver and then when I
opened the file, it
> didn't crash anymore. So, I added the link to the
javascript file back in
> there, and it looks like everything is ok now. But, in
case it happens
> again,
> this are the files that are giving me trouble:
>
>
http://digitalevent.net/Templates/index.dwt
>
http://digitalevent.net/Templates/index2.dwt
>
http://digitalevent.net/Templates/index3.dwt
>
> &
>
>
http://digitalevent.net/index.htm
>
http://digitalevent.net/index2.htm
>
http://digitalevent.net/index3.htm
>
> Those were the only three html files I tested for the
error. The weird
> thing
> was, sometimes there was a noticable delay between
closing a file and the
> exception being thrown. Sometimes I was actually able to
open two or three
> files (I click pretty fast sometimes) before the
exception would be
> thrown. I
> think this is why I thought I had discovered the problem
before. I also
> tried
> to detaching the html files from the templates, but that
didn't help.
>
> This is the second time I've run into the exception
being thrown while
> executing DWMenu_File_Close command in menus.xml. The
first time, as I
> mentioned before, it was related to Library items being
embedded in a
> template
> (I think). I removed the Library item and it worked
fine. Eventually I
> think I
> solved it by recreating the Library items entirely, by
copying and pasting
> each
> line from a text file. Really strange, but I think the
common element is
> that
> it has happened while dealing with a
site/template/library item created in
> DW
> MX2004. Are there any known conflicts, or anything I can
do to avoid this
> in
> the future?
>

Exception caught while loading menus.xml: TypeError: Access is denied. (IE), WORKS IN Firefox

hi iam trying to get the data into spry table(Dr-cs3) from xml file and iam using spry xml dataset. my application is working in every browser except in IE.
ERROR IS :
Exception caught while loading menus.xml: TypeError: Access is denied.

Hi
this error is because of spryData.js, spryXapth.js generated by Dr CS3, I used Dr CS4 generated javascript files, then the same application is working.

CS4 menus.xml error?

Hello!
I just installed Dreamweaver CS4 on my Mac, but whenever I
launch the application I get an error that tells me Dreamweaver has
encountered an error, when accessing the menus.xml file. It then
recommends that I delete the current menus.xml file and rename
"menus.bak" as menus.xml.
After doing this several times, uninstalling and reinstalling
Dreamweaver, I still cannot launch the application. Any
suggestions?
Thanks!

What extensions have you installed? This error is typically
associated with
installation of a non-DWCS3-compatible extension.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"pg1380" <[email protected]> wrote in
message
news:fatb9h$eup$[email protected]..
> I'm have installed Dreamweaver CS3 and i keep getting a
menus.xml error.
> I
> ha've renamed the menus.bak files to menus.xml as stated
and have even
> reinstalled a couple of times after removing the files
manual as well. I
> am
> getting quite desparate so any ideas would be most
appreciated.
>

Cannot launch dreamweaver as menus.xml file corrupt

Help - I have not used Dreamweaver CS5 in a few months, went to launch it today, and the program complains that the current menus.xml file cannot be constructed. The suggestion is to replace it with menus.bak which does not help. I reinstalled dreamweaver - no luck. I downloaded and installed the latest update - again no luck.
On the machine is also LR 4.1 and Photoshop CS6 - am hoping these do not cause a conflict.
BTW searched forums and internet but none of the advice seems to work. Running Win7 (64).
Thanks.

Moving this to Dreamweaver Section.

Dreamweaver encountered problems while constructing the menus from the current menus.xml file

So, after having trouble with my Photoshop scratch disk, I had to do an archive and install of my Mac OS 10.6.1 then reinstall the Adobe suite. I then had to run the Licensing Repair Tool (http://www.adobe.com/support/contact/licensing.html).
Now everything works but Dreamweaver, which is throwing the following error:
"Dreamweaver encountered problems while constructing the menus from the current menus.xml file.
Please delete the current menus.xml file and rename menus.bak to menus.xml"
I tried that. menus.bak is a directory, not a file. Even renaming the directory didn't work.
I saw this http://forums.adobe.com/message/2188511#2188511
but I don't have a /FlashPlayerTrust/ directory, nor do I see what that has to do with Dreamweaver.
I couldn't find a corresponding solution for this http://forums.adobe.com/message/862339#862339 for the Mac OS.
This http://forums.adobe.com/message/3396334#3396334 didn't help, either.
Anybody have any ideas?
Thanks!

This is the error I got after deleting (moving) the configuration directory.
"No document types have been found in the Configuration/DocumentTypes/ folder. The MMDocumentTypes.xml file may be missing or corrupted. The application will exit now."
I've reinstalled the entire Adobe CS4 (which fixed my Photoshop problem but created this Dreamweaver problem) and then reinstalled Dreamweaver alone.
I've also attached a screenshot of the Dreamweaver directory tree with the menus.xml files.

Menus.xml error on startup

I'm have installed Dreamweaver CS3 and i keep getting a
menus.xml error. I ha've renamed the menus.bak files to menus.xml
as stated and have even reinstalled a couple of times after
removing the files manual as well. I am getting quite desparate so
any ideas would be most appreciated.

What extensions have you installed? This error is typically
associated with
installation of a non-DWCS3-compatible extension.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"pg1380" <[email protected]> wrote in
message
news:fatb9h$eup$[email protected]..
> I'm have installed Dreamweaver CS3 and i keep getting a
menus.xml error.
> I
> ha've renamed the menus.bak files to menus.xml as stated
and have even
> reinstalled a couple of times after removing the files
manual as well. I
> am
> getting quite desparate so any ideas would be most
appreciated.
>

SSRS-XML issue

I have a field in the database table that contains an XML string. It is not formatted. In report we need to display it as formatted like XML
xml, with highlight option, tree view with expand/collapse option on each node. We are able to achieve the formatting with below script
Public Function FormatXml(file_content As String)As String
Dim doc As New System.Xml.XmlDocument()
doc.LoadXml(file_content)
Dim sb As New System.Text.StringBuilder()
Dim settings As New System.Xml.XmlWriterSettings()
settings.Indent = True
settings.IndentChars = " " ' This includes 4 non-breaking spaces: ALT+0160
settings.NewLineChars = System.Environment.NewLine
settings.NewLineHandling = System.Xml.NewLineHandling.Replace
settings.OmitXmlDeclaration = True
Using writer As System.Xml.XmlWriter = System.Xml.XmlWriter.Create(sb, settings)
doc.Save(writer)
End Using
Return sb.ToString()
End Function
But this is not working with all IE version.Mainly we are trying to get tree view with expand/collapse option on each node in the report . Please help me in resolving this issue

I've tried creating a new parm:Object but the issues still
comes down to how Microsoft generates the URL parms using the ":"
to define a variable.

Idoc flatfile to IDOC xml issue with new PI7.11 module SAP_XI_IDOC/IDOCFlat

Hi,
I am trying to develop a scenario as mentioned in the blog using the new module available in PI7.1,but I am getting this error
"Error: com.sap.conn.idoc.IDocMetaDataUnavailableException: (3) IDOC_ERROR_METADATA_UNAVAILABLE: The meta data for the IDoc type "ORDERS05" is unavailable."
I have made every configuration correct and IDOC meta data available in both SAP R3 and PI,but it is still complaning about the meta data does not exist.
Blog: http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/13743%3Fpage%3Dlast%26x-order%3Ddate
did anybody face issue with the new module available "SAP_XI_IDOC/IDOCFlatToXmlConvertor",please help me or give me mre information why I am getting this meta data error.
Thank you,
Sri

Hi Sri,
To Convert IDOC Flat file into IDOC xml from the given blog, the IDOC flat file should be present in standard format like:
E2EDK01005                    0000047110815000000000001.........
E2EDKA1003                    0000047110815000000000002.........
E2EDKA1003                    0000047110815000000000003..........
E2EDKA1003                    0000047110815000000000004........
The Flat file have relationship as IDOC Number "000004711081500000" and segment sequence "0000001".
If your flat file is not in this formate so i don't think that module is able to convert into IDOC xml. and if your file is already in this format then it may be issue with destinations which are created in NWA.
Thanks
Harish

Castor XML issue

Hi,
i m using castor-1.0.3 for generating source code from xml schema.
i ve a complex schema n even have binding file too for class name conflicts.
The issue i m facing is when i run "
java org.exolab.castor.builder.SourceGenerator....." it gets hung after generating certain class files. it ll never proceed. i need to explicitly terminate after waiting for a long time..
I m stuck here as to what might be going wrong here..
Kindly suggest.
Regards,
Lance

FYI:
I tried Castor. In my opinion, there's a much better solution BC4J. BC4J lets you read and write your objects to XML, using readXML and writeXML. It seems more mature than Castor.
If you are just reading and writing your object or collection of objects and hierarchy to file, then you only use readXML and writeXML.
With BC4J, you model you objects in BC4J, then BC4J allows you to create a DTD for these objects. So if you have inbound or outbound XML that you need to transform from/to, you can then use this DTD and the DTD/XML Schema of the other format to write a xslt transformation.
Another benefit, you can pass object hierarchies across a web service using writeXML on the client side and then readXML to repopulate the object hierarchy on the server side of the web service.
Richard Catlin

Deposit Advice XML Issue

Hello Gurus, I am having an issue with XML Deposit Advice and XML Check Writer. In our deductions, we have City Withheld and Head Tax Withheld. For some employees, the City Withheld is showing as '0' on the Deposit Advice Slip but '6.92' on the SOE. Though the Deposit Slip shows '0' for withheld under deductions, the Net Pay matches with that on the SOE. Can anyone tell me why this is happening? Any help is highly appreciated.
Thanks, Naveen.

This is an internal error with Hr/Payroll.
Thanks, Naveen Gagadam.

E4X Xml issue

hi,
I am facing an intermittent issue with E4X.
I am trying to do following:
1. Get XML from web service in string format.
2. Replce \ using regular expression. Below is the code.
webResult = webResult.replace(/&/g, '');
webResult = webResult.replace(/&/g, '');
xmlResult = new XML(webResult.replace(/\\/g, ''));
3. The issue is XML tags/attributes are mispaced as below.
Input Xml (i.e. webResult) contains following line :
<SourceHeaderKey Source="CI" SourceCode="20" Key="708011233708011233258956002000" />
Replced with below string in E4X :
<SourceHeaderKey Source="CI" SourceCode="20" Key=""708011233708rceCode="20" Key="708011233708011233258970002000"/>
4. Key="708011233708011233258956002000" is correct, but in E4X it is Key=""708011233708rceCode="20" Key="708011233708011233258970002000"
Any known issues with E4X. I tried searching on web but could not find any.
Any help is greatly appreciated. PLease help.
Thanks,
Aditya
Adi

Hi Aditya,
You're asking this question in the wrong forum, this forum is for reporting issues with the forums themselves, not individual product support.
I think your best bet to get some help with this is over in the JavaScript forum on the asp.net site:
http://forums.asp.net/130.aspx/1?HTML+CSS+and+JavaScript
One note though, I did see that Firefox has completely dropped support for E4X:
https://developer.mozilla.org/en-US/docs/E4X/Processing_XML_with_E4X?redirectlocale=en-US&redirectslug=Core_JavaScript_1.5_Guide%2FProcessing_XML_with_E4X
Good luck.
Don't retire TechNet! -
(Don't give up yet - 12,420+ strong and growing)

PFCG Role Menus Translations issues

Hello everyone,
I have an issue, which i cant seem to fix or understand why it may have occured:
my issue is as follows:
The problem which I am having is that we have a number of custom Transaction CODES that we just translated into the German. However in the role menus they are still displayed in English language even when you change the login language to German.
I thought the reason this issue might be occuring, is because they may have been entered into the role menu prior to the translation ever existed
But if I create a new role with the same TRANSACTION CODE they are correctly displayed.
i AM CONFUSED.

Hi Jurjen,
I have executed the program "Utility for adding texts to roles", and put in one of the ROLES which is a Z ROLE
what must it show?
what i can see is the following
I put in the role name and than I select the Language DE
What i see is the TRANSACTION CODEs LIKE.
KDH3...
and i also see 2 Z transactions too, against the 2 Z transactions i see the language as DE, but the transaction text is states "NO TEXT". all the other transactions inthe role arent Z transactions and they are shoing the GERMAN Transaction text.
Correct me if im wrong Jurjen, the 2 Z transactions with the language DE is showing "NO TEXTS" i take it its these 2 that need the texts adding? but how do i add the text?
Now the other interesting point is that if I select the Language EN, and execute the report I see the english transaction text showing up, which means the german transaction text is missing.
but why arent i seeing the german equivalent text for those 2 Z transactions?
thanks

Menus.xml issue

Similar Messages

Maybe you are looking for