Mep code 0 tries left .....
i have a bb bold 9650 ... with zero mep tries left , could it be unlocked ??
After the ten attempts have been used and you have 0 left, you must get RIM to unlock the device.
There are two routes, and only two, to achieve this.
* IF your device is in warranty, contact your service provider technical support. Tell them you have this issue which needs to be escalated to RIM level customer support. I'll warn you that most carrier technical support people will first assume and think you are referring to a device security unlock, and you will need to convince them otherwise and explain clearly what you need. THEY will not be able to help you because the carriers themselves cannot unlock a device which has had the MEP code attempts depleted, and should (and you will need to ask) to have the case escalated to RIM level tech support.
* If your device is out of warranty, contact RIM direct. See the Contact Us information from the website: http://ca.blackberry.com/contact/ The options you want to select to speak to BlackBerry Customer Care are 3 (for inquiries, orders, billing, e-RMA etc) then 5 (e-RMA and Out of Warranty).
Make sense? Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
Unlock my blackberry Curve 8520: Enter service provider mep code (0) left
Good afternoon,
A few days ago I bought a BB Curve 8520 from a friend but the phone says:
"enter service provider mep code (0) left"
Is it possible to fix this problem?
Regards,
JulianSomeone tried too many bad attempts to enter an unlock code in the device.
After the ten attempts have been used, you must get RIM to unlock the device.
There are two routes, and only two, to achieve this.
* IF your device is in warranty, contact your service provider technical support. Tell them you have this issue which needs to be escalated to RIM level customer support. I'll warn you that most carrier technical support people will first assume and think you are referring to a device security unlock, and you will need to convince them otherwise and explain clearly what you need. THEY will not be able to help you because the carriers themselves cannot unlock a device which has had the MEP code attempts depleted, and should (and you will need to ask) to have the case escalated to RIM level tech support.
* If your device is out of warranty, contact RIM direct. See the Contact Us information from the website: http://ca.blackberry.com/contact/ The options you want to select to speak to BlackBerry Customer Care are 3 (for inquiries, orders, billing, e-RMA etc) then 5 (e-RMA and Out of Warranty).
Make sense? Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Blackberry 9300 solution for mep code (0 left)
Hi
Blackberry 9300 solution for mep code (0 left)
Help me please
Thanks...Hi and Welcome to the Forums!
With zero tries left, there is only one official solution -- sending your BB to the RIM factory to have it totally reset. Your methods of requesting this service are the same as for all BB service...via your wireless service provider. If they refuse or if you have no warranty (due to a variety of reasons, this can be the case), then you must request this via paid incident support:
http://us.blackberry.com/support/programs/technical/incident.jsp
Be advised that, while I have no personal experience with this, it is my opinion that the cost of having this done will exceed the cost of just buying a new BB.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
How to unlock Q10 when 0 attempts to enter MEP code are left
Hi,
How to unlock Q10 when 0 attempts to enter MEP code are left?
Thanks.
LaurentHey BBLaurent,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
To unlock the BlackBerry Q10 smartphone, please contact your network service provider or point of sale.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)! -
Network MEP code (0: left)
My bb 8520 curve say enter network MEP code (0: left) I got as a gift from my friend in uk, so I entered wrong code many times, can u help a solutio plz!
After the ten attempts have been used, you must get RIM to unlock the device.
There are two routes, and only two, to achieve this.
* IF your device is in warranty, contact your service provider technical support. Tell them you have this issue which needs to be escalated to RIM level customer support. I'll warn you that most carrier technical support people will first assume and think you are referring to a device security unlock, and you will need to convince them otherwise and explain clearly what you need. THEY will not be able to help you because the carriers themselves cannot unlock a device which has had the MEP code attempts depleted, and should (and you will need to ask) to have the case escalated to RIM level tech support.
* If your device is out of warranty, contact RIM direct. See the Contact Us information from the website: http://ca.blackberry.com/contact/ The options you want to select to speak to BlackBerry Customer Care are 3 (for inquiries, orders, billing, e-RMA etc) then 5 (e-RMA and Out of Warranty).
Make sense? Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Hi!
My request would be somewhat not ordinary, but I have nowhere else to turn, because I live in Russia ... :-(
Saw the phone BB Curve 8900 and fell in love. Ordered through e-bay. They sent, but only for T-mobil.
One "very intelligent" people advised to enter 10 times Network Mep code, which I did. :-(
How can I be? T-mobil we do not.
P.S. Sorry for my English.
{edited for privacy}
Roman.Hi and Welcome to the Forums!
If I understand you correctly, the "very intelligent" people you trusted gave you very bad information. After attempting (and failing) to enter the proper unlock code 10 times, the device is permanently locked to the original carrier, and cannot be unlocked. What you needed was the proper unlock code (which can be purchased) and to have entered that...doing so would have unlocked the BB from TMobile, allowing you to put a different carriers SIM into it and use it. Now you cannot do that. And there is no fix that I know of.
Sorry.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Unfortunately, the "rom booter" did not work. I have downloaded the desktop manager software from Blackberry suppport and have run that program also. Still no solution to the problem. Any other ideas?
Hello!
I've no idea what a "rom booter" is...maybe you are talking about something in a different thread. Nevertheless, there is NO LEGAL means for anyone but the RIM factory to recover your situation...
If you have used up all of your chances to enter the correct unlock code, there is nothing further you can do. Even if you happen to have now the correct code, it is useless. Only the factory can now (legally) unlock your BB. Typically, I've heard that the cost of having RIM do this for you will be greater than the cost of just buying a new one. But, you are able to ask them...see here:
http://us.blackberry.com/support/programs/technical/incident.jsp
Note, however, that this process will start with a fee...
If you obtained your unlock code from somewhere but it was incorrect, your recourse could be with them -- however, they may well question why you exhausted all 10 attempts before contacting them.
If your BB was already MEP locked and you obtained it from a source that represented it as being able to be unlocked, then your recourse would be with the seller you obtained it from.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Enter network MEP code (0 left)
I have PIN, IMEI, MEP & MEP2 codes but i can't unlock my blackberry 9300. What can I do now?
Why do you need to unlock, your service provider can help, they contact blackberry and get the code but you get charged £20/£30 for it. Take to a shop that do repairs, they can do it for aroun £10.
Craig Ashcroft Elite UK
If this post helps you please click the LIKE below the post(s) -
I tried to unlock my curve 3G with the mep code which was provided by my phone supllier, but there is now 0 try left for this mep code. I cannot change my sim card then... How should i do to unlock my phone? Many thanks
Hello lantez
Welcome to BlackBerry Support Community Forums
You should not have entered 10 wrong mep code now it locked and you can contact your Carrier and see if they can forward the case to RIM for you as now only RIM can reset the mep counter.Also look at this thread it might help MEP code (0 left) on Blackberry .
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it. -
No MEP code in the escreen !!
Hi,
My Q10 was hard reseted during a keyboard exchange by the constructor (under warranty) and no longer desimlocked. I obtained an official code and the network and sub-network are now unlocked as told in the security menu but I am reaquested for a MEP code and could not connect to the network.
I went into the 'escreen' and the "OS Engineering Screens" and "Device Info" menus but not MEP codes are listed !
Can anybody help me ?
Thanks in advance.
econseillerIf your phone was working before the person did that hard reset I would go back to them first.
If that person can't help you, check with your carrier and see if they can escalate to BlackBerry if they (carrier) can't resolve it.
Another option is to use the BlackBerry Incident-Based Support located at
http://us.blackberry.com/support/programs/technical/incident.html#tab-1
Take a look at some similar threads too:
http://supportforums.blackberry.com/t5/BlackBerry-Storm/Mep-code-0-left/m-p/2181779/highlight/true#M...
http://supportforums.blackberry.com/t5/BlackBerry-Bold/MEP-unlock-code/m-p/1796657#M120320
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music! -
i have 0 MEP trials left on my mobile and i read an article that supposed that i contact RIM to try to help me...
do anyone here have a solutionibrahimkamel wrote :
i have 0 MEP trials left on my mobile and i read an article that supposed that i contact RIM to try to help me...
do anyone here have a solution
Hi ibrahimkamel
Welcome to BlaclBerry Support Forums
If you had tried all ten attempts then it can only be Unlocked by RIM ,No one can reset the MEP counter or Unlock it except RIM. Look at this Thread which might help you. mep code is blocked .
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it. -
Hi,
I received an unlock code from my nework provider Orange to unlock my BB Curve.
This is the second code I am trying but my BB shows I have 0 trys left.
Any idea what to do? my provider is very slow in giving me answers
ThanksHi and Welcome to the Forums!
With 0 tries left, the only official way to unlock it now is at the RIM factory. Since your provider gave you an incorrect code, you may have recourse with them to get it done. But you will have to be persistent...and patient, especially given how slow they are at answering. But, there is no other way.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
MY FATHER WAS GAVE ME THE BLACKBERRY AS A GIFT
HE TOLD ME THAT HE PURCHASE IT ON A ONLINE STORE
THEN THE PROBLEM IS ZERO LEFT MEPCODE?
WHAT DO I DO?Hi there,
Unfortunately, if you are seeing that message, you will be unable to unlock your phone. Did you get the phone like that, or did you enter the incorrect MEP code yourself? If you got the phone like that, I would have your dad contact the seller and complaint. If it was bought from eBay, then you can file a complaint.
If you got to this message by entering the wrong MEP code yourself, then you will be out of luck and the phone will only work on the original carrier that the phone was locked to. You can try checking with a cellphone repair shop, but any "repairs" they take are at your own risk.
If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
If your issue is resolved, don't forget to click the Solution button on the resolution! -
As the title says... In a mess of getting wrong codes from wrong places and trying to abort the entry process (seriously, who was the sadist bas**** who decided that all "cancel-like" buttons should mean "ok"?) I've managed to get down to 0 tries on the operator unlocking... and after that I apparently got what was the right code. hooray for me.
Information seems to get a little cloudy from here on, anyone knows if there actually IS a way of bypassing this in any way? Or if it is indeed hopeless and I should flush this down the toilet or maybe give it to someone in the network this is locked to and give up hopes of using it?It is not hopeless... but it is not an easy way around it.
After the ten attempts have been used, you must get RIM to unlock the device.
There are two routes, and only two, to achieve this.
IF your device is in warranty, contact your service provider technical support. Tell them you have this issue which needs to be escalated to RIM level customer support. I'll warn you that most carrier technical support people will first assume and think you are referring to a device security unlock, and you will need to convince them otherwise and explain clearly what you need. THEY will not be able to help you because the carriers themsevels cannot unlock a device which has had the MEP code attempts depleted, and should (and you will need to ask) to have the case escalated to RIM level tech support.
If your device is out of warranty, contact RIM direct. See the Contact Us information from the website: http://ca.blackberry.com/contact/ The options you want to select to speak to BlackBerry Customer Care
are 3 (for inquiries, orders, billing, e-RMA etc) then 5 (e-RMA and Out
of Warranty).
Make sense? Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I have a blackberry 9700 and all the mep tries there use up can u help me fix it please
Subject Title edited to reflect new topic.romarioross wrote:
I have a blackberry 9700 and all the mep tries there use up can u help me fix it please
After the ten attempts have been used, you must get RIM to unlock the device.
There are three routes, and only three, to achieve this.
* Purchase a MEP unlock code from a MEP unlocking vendor on the internet. Be wise and make sure you purchase from one with a good reputation and with good reviews and feedback.
* IF your device is in warranty, contact your service provider technical support. Tell them you have this issue which needs to be escalated to RIM level customer support. I'll warn you that most carrier technical support people will first assume and think you are referring to a device security unlock, and you will need to convince them otherwise and explain clearly what you need. THEY will not be able to help you because the carriers themselves cannot unlock a device which has had the MEP code attempts depleted, and should (and you will need to ask) to have the case escalated to RIM level tech support.
* If your device is out of warranty, contact RIM direct. See the Contact Us information from the website: http://ca.blackberry.com/contact/ The options you want to select to speak to BlackBerry Customer Care are 3 (for inquiries, orders, billing, e-RMA etc) then 5 (e-RMA and Out of Warranty).
Make sense? Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Maybe you are looking for
-
Hello While doing STO between depot to depot for the same company am getting this error. I did this ME21N- VL10B-Vl02N-VF01- then if I go with J1IIN to get excise invoice then system comes with this error message. "Document is of plant 1871 which i
-
JavaFX - Image preloading problem
Hi, I try to use ImageView and face some problems with image preloading. Here is the code related to the component that has problems. The component extends CustomNode. in class attributes declaration: var imgNodes: ImageView[]; // list of url of imag
-
Changing file classification after importing
I've got loads of CDs that contain spoken word and radio plays. When I imported them, the contents were automatically classified as individual songs and put in my Music library. Any way to have them reclassified as Audiobooks? I'd also like to have i
-
How can I get a reference to ApplicationModule in a servlet
I know that I can easily get the reference to my ApplicationModule in any JSP using the tags but I need to use a servlet instead of a JSP. Would you please let me know how I can a reference to my ApplicationModule in my Servlet? Every function that I
-
I just got the component AV cable but not sure i know how to send the video signal from the iPad to the TV.