MEPO1319-IDNLF  - Lief.Artikel as default in the I/O field

Hi community,
I have a strange problem in the dynpro 1319 of program SAPLMEGUI (Transaction SE51).
The system has the default setting "Lief.Art" in the I/O field (in our Q-System the field is filled with ___________________________________.) witch causes an error when I create a purchse order with transaction ME21N. In the item of the purchase order the value EKPO-IDNLF shows "Lief.Art" as default in the dynpro. When I try to change the field, i get the error message 00 088.
Can somebody tell me, why the value "Lief.Art" is as default in the dynpro of SAPLMEGUI? I did not do any changes on that an found no customizing.
Thank you a lot... )
Best regards,
Oliver

Hi Kiran!
I agree with all points. I have no rights to change it, because the owner of the program an dynpro is sap. Nevertheless I need to find out, why the value "Lief.Artikel" is stored in the dynpro. I´ve checked several systems, but did not found even one with this entry. what is stored in your system?
Regards,
Oliver

Similar Messages

  • How to set the value that appears in the 'Reply To' field when sending Mail.

    I send my mail from one email address (i.e. server) but I want replies to go to a different email address (i.e. server).  Apple Mail facilitates this but only when I remember to type the email address into the 'Reply To' field when I compose the message.  The email address that I want people to reply to is always the same.  Is there anyway to make this appear as tyhe default in the 'Reply To' field when I create a new message? 

    Please go to this link and you will find out:
    https://www.macupdate.com/app/mac/27025/secrets
    This is very usefull to set hidden parameters

  • Downloading images used to go automatically to the last folder used to save images, even when reopening Firefox. In just the past few days, possibly coinciding wih the most recent updates, the folder defaults to the 'Downloads' folder. This is most annoyi

    Downloading images used to go automatically to the last folder used to save images, even when reopening Firefox. In just the past few days, possibly coinciding wih the most recent updates, the folder defaults to the 'Downloads' folder. This is most annoying. What happened? Internet Explorer 8.0 did the same thing. This was one of the reasons why I started using Firefox to download all images. I went into Tools>Options and it only lets me set another folder. I dont want to set a specific folder I want it to always go to the last folder used. So what gives?
    == This happened ==
    Every time Firefox opened
    == possibly when the most recent updates were installed, a few days ago

    Thanks jscher 2000. I guess I didn't make it clear. "It restarts with all the addons activated, and resumes with the tabs that were open before closing it." IE, it's running fine now with all the extensions activated. Everything is OK now.
    So something in the Firefox code was causing the bad behavior. It's not essential that I find out what the problem was - I'm just curious. And if anybody else has this same problem, it might be nice to have it corrected at the source.

  • How do I save PDF files by default to the folder of the source file?

    How do I save PDF files by default to the folder of the source file with Acrobat 9.0.0 Standard?

    I am not seeing that behaviour. If I right-click a link to a .pdf file, I get the file saved with the original filename.
    Maybe one of the settings in about:config controls that?
    pdfjs.previousHandler.preferredAction is a setting that has a value of 4 with my setup. I have no idea what that means, and I could not find any explanation anywhere. You could try using different numbers for that value and see if any make any difference. Why has nobody bothered to explain that setting anywhere?

  • Excise rate and value is not getting defaulted from the purchase order

    Hi all,
    While capturing excise invoice , the excise rate and value is not getting defaulted from the purchase order and in Excise Item Tab BED,AED,ECS is Zero at both header as well as item level for only one material in STO process and if we are doing same process taking other material all things are coming perfectly and We are maintaining condition with respect to vendor,plant and material combination.Any input related to this will be helpfull and rewarded.
    Regards
    Vishal

    Hi,
    Follow STO Process for this;
    1.Create a vendor for the company code of receiving plant, using account group: 0007 using T-Code XK01.
    2. Assign this vendor to Delivering plant
    Go to XK02 >Purchasing view>Extras>Add. Purchasing data>Plant
    3. Create internal customer with the sales area of the vendor. Go To XD01
    4. In pricing procedure determination relevant to STO, assign document Pricing Procedure and customer pricing procedure appropriate for STO to get the pricing in the invoice.
    5. Maintain condition records for the relevant pricing condition.
    6. Some more setting for STO: Go to MM> Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Receiving plant >assign customer here & Supplying SA (for billing) to Receiving plant here
    7. Go to MM > Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Supplying plant and assign the sales area of receiving plant.
    8. Go to MM > Purchasing > Purchase Order > Set up STO > assign delivery Type & Checking rule
    Assign the delivery type to document type. In this case, Delivery type NLCC is assigned to Document type NB
    9. Go to MM> Purchasing > Purchase Order > Set up STO > Assign document Type, One step Procedure, Under delivery tolerance
    Assign the document type NB to supplying plant and receiving plant
    10. After all settings, Create the STO using T-Code: ME21N and maintain pricing conditions of freight and Save.
    11. In supplying plant Maintain condition record in sales using VK11 the same will flow in receiving plant when referring the OBD no during MIGO.
    10. Create Delivery: VL10G
    12. Picking, PGI: VL02N
    13. Billing: VF01
    Save the document and its done
    14. J1IIN - Outgoing Excise Invoice
    15. MIGO - Goods Receipt against outbound Delivery
    16. J1IEX - Capture & Post Excise Invoice
    Rgs

  • I have several Outlook accounts and want to switch between them but Firefox defaults to the main one and won't let me access the others.

    Outlook now makes me sign out and sign back in to each of my email accounts. When I try to sign back in, it defaults to the main account and won't let me type in the other email addresses. This only happens in Firefox, both Google and IE leave the email address blank and let me type in the one I want to access. I'd rather use Firefox, but it doesn't let me type in a different email address. Can I fix this?

    This can be caused by corrupted cookies or cookies that are blocked (check the permissions on the about:permissions page).
    *https://support.mozilla.org/kb/fix-login-issues-on-websites-require-passwords
    Clear the cache and the cookies from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
    If clearing cookies doesn't work then it is possible that the <i>cookies.sqlite</i> file that stores the cookies is corrupted.
    Rename (or delete) <b>cookies.sqlite</b> (cookies.sqlite.old) and delete other present cookie files like <b>cookies.sqlite-journal</b> in the Firefox profile folder in case the file cookies.sqlite got corrupted.
    *http://kb.mozillazine.org/Cookies
    *https://support.mozilla.org/kb/Deleting+cookies

  • I have been trying to recover or reset my password, but the reset email never comes, so I can't change my password. I tried to open a new itunes account to assign my iphone 4 to, but it always defaults to the old itunes account?

    I have been trying to recover or reset my password, but the reset email never comes, so I can't change my password. I tried to open a new itunes account to assign my iphone 4 to, but it always defaults to the old itunes account?

    Me too! I tried to reset many times the password of my daughter’s id but she never received an email with instructions. :-(

  • FF keeps defaulting to the wrong HTTP proxy server and port. I have to change it every time I attempt to open Firefox? How do I change it for good?

    The manual proxy settings keep defaulting to the wrong HTTP and port. This has caused me many hours of anguish. It works fine when I correct the settings but after you log off and then come back it has to be changed again. Is there anyway to fix it? Or can I go back to the previous version because 4 definitely has some issues (other than this one). I could live with it if I had to but I'm not the only one who uses this computer and they don't know how to make the changes. Thanks and I would definitely appreciate an answer.

    See:
    * http://kb.mozillazine.org/Preferences_not_saved
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • When I open another window the cursor defaults to the bottom of the page instead of the top why and how can I fix it? It is a pain to have to keep scrolling to the top all the time. This does not happen with Chrome or IE.

    I can send you a screen shot if that would be helpful.
    I have noticed that the emails sent out of S1 always default to the end
    of the message so we need to scroll up to edit what we've written. Most
    of the time I need to edit the text near the top of an email so although
    it is a very minor thing, it is a bit irritating.

    In Firefox 4 the cursor is placed automatically at the end of a text area.<br />
    Easiest to go to the top is by using Ctrl+Home

  • Appointment alert/reminders default on the iphone

    When I use Ical for my Imac I can configure it to create reminder alerts of all newly created appointments by default, instead of setting the reminder myself. On my iPhone I have to manually set the reminders for each appointment I enter. Is there a way to make appointment alerts/reminders default on the iPhone?

    RobFow wrote:
    Is there a way to make appointment alerts/reminders default on the iPhone?
    No. Apple would need to implement this feature.
    You can submit feedback to Apple: http://www.apple.com/feedback/iphone.html.

  • How to set a default value in the "Our reference"-field in purchse orders?

    Hi!
    When creating a purchase order the "Our reference"-field in the Communication-tab is empty. Is it possible to configure this so that the field is filled by default with the name of the person who is creating the PO?

    Hi,
    There is a button named Personal Settings on ME21N screen. Click on that button --> Click on second tab of Default Values --> Click on More fields --> Select Our reference and maintain the default value. This will always come up at the time of creation of PO.
    Hope this serves the purpose.
    Thanks...
    Edited by: vilas amrutkar on Feb 17, 2009 5:17 AM

  • How can I set defaults in the TestStand's step settings Labview Advanced Settings tab to run a VI on a remote PC?

    I am accessing a VI many times which is run on a remote PC.
    When I click Step Settings, click on the Module tab, then click on the Labview Advanced Settings, there is are options for running a VI on a remote PC.
    An annoyance is having to enter the remote host, remote VI path, port number and timeout settings every time I created a step to call the VI in the tests. These are a constant, or at least the rule by far rather than the exception. The TestStand step settings default is the VI does not run on a remote PC (unticked) and there are of course no IP addresses etc as defaults. So if I make a minor change to the tests such as the remote VI location, I have to manually change it is every occurrence of the VI being called. This is very time consuming and is prone to human error.
    Is there a way I can preset these settings so that every time I call a Labview module, these defaults are invoked without me having to set them every time?
    I guess a workaround is to have the VI run in a subsequence, so that the settings are made just once, but I would prefer not to have to do that.
    regards to the NI community,
    Dave
    Solved!
    Go to Solution.

    Hi,
    What you can do if you are using TS4.x is create your first step, then add it to the Template List. Then use the step from the template list when you require similar steps. See User Manual Chapter 3-6.
    Regards
    Ray Farmer
    Regards
    Ray Farmer

  • The back button no longer works. I have disabled all add-ons, rebooted & reset the defaults for the browser and nothing has changed. This happens on all webpages.How do I get the back button to light up again?

    the back button no longer works. I have disabled all add-ons,rebooted & reset the defaults for the browser and nothing has changed. This happens on all webpages.How do I get the back button to light up again?

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    *Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
    Another possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.com/kb/Bookmarks+not+saved#w_places-database-file

  • How to check radio button as default on the basis of database value?

    Hi Friends,
    I have one jsp, in which I am having a field of radio button, which have two boolean values of 0 & 1. I want to check the radio button as default on the basis of database value, kindly help me out.
    Thanks a lot in advance. Please help me out.

    probably, when using struts you should do all your calculations in action class it self
    Eg. in jsp
    <html:radio name="myForm" property="myProperty" value="0">0</html:radio>
    <html:radio name="myForm" property="myProperty" value="1">1</html:radio>
    in Action class
    if (databaseValue == 0)myForm.setMyProperty(0);
    else if (databaseValue == 1)myForm.setMyProperty(1);
    rest will follow
    whatever be the value it will come selected

  • C855-S5190 restored via recovery to factory defaults, ran the Toshiba updater, no Windows Update

    I'm desperately searching for help!  My elderly father has a C855-S5190 and after trying the update to Windows 8.1 from the store, the laptop doesn't boot all the way up - kept giving various errors.  So, he dropped if off for me to try to fix.  I couldn't get around it so I did the restore to factory defaults from the restore disks.
    After that all finished, I tried the Toshiba service station and it gave me about 7 updates that I installed.  After that, I rebooted and then wanted to see about doing the Windows 8.1 update.  Went to Windows Store - it says I need to do Windows Updates.  I went to search, and now there's no Windows Update showing anywhere.  I checked settings, and everything is empty under there as well.  What happened??
    If someone could tell me how I can possibly do the Windows Updates.  I tried this once before trying the service center, the updates either fail, or they install, then it reboots, can't configure them, and gets stuck in a loop of trying to roll things back.  That caused me to have to do another restore to factory defaults - I've had to do it 4 times so far, and I just don't want to get stuck in that loop again.  So, I need to know what happened to my Windows Update, how do I get it back, and how the heck do I get this thing updated to 8.1?
    I booted a Linux live media before starting and was able to recover the files, etc., he had on it to a USB flash drive since I knew doing the restore would wipe that all out.
    Any and all input is GREATLE appreciated!!
    Dave

    Here's the link to the Microsoft page,  I had to do this to get Windows Update to run.  The Windows 8.1 upgrade would not let me do the upgrade until Windows Update was run, and I kept getting this error.  It takes a *long* time for this to straighten out if you've done a factory defaults restore - several reboots, etc..
    http://support.microsoft.com/kb/949358

Maybe you are looking for