Meraki Repeater with MacBook

I'm within range of a Meraki network signal that will apparently let me access the internet. However, Apple Airport is a modem and Access Point in one and appears to be interfering with the signal. If I purchase a Meraki repeater to extend the signal, then use an ethernet cable to hook the repeater to my MacBook, will it allow me to access the existing Meraki network signal without interference from Airport?

I'm trying to access the internet via a free public wireless network provided by my town. The town uses a Meraki network, and, from what I understand, Airport Express interferes with the Meraki base station's signal, which prevents me from using the free network through my MacBook.
The sales folks at Meraki told me if I get one of their repeaters (cost $199) I can use that, instead of Airport. I wanted to know if anyone on this forum had any corroborating information or if someone perhaps had an alternative solution.
Thanks.

Similar Messages

  • My iPhone connects and disconnects repeatedly with Macbook Pro

    As of this morning, everytime I connect my phone to my computer it rapidly connects and disconnects. After searching the web far and wide I've only come up with dead ends. Before today it worked fine, I don't think it's the cord because it works when i tried it with another computer and works when I charge my phone with the wall charger (which I'm forced to do now). Error messages have popped up like 0xE8000001 and 0XE8000065. If anyone could help that's be awesome.

    I had to restore the phone to factory settings. Turn it off (press & hold sleep/wake button) and then plug it it to your computer while pressing the home button. Even at that stage the phone might keep disconnecting and reconnecting occasionally. I acctually had to do it on a mac running 10.6.8. My laptop is on 10.7.3 and it would not stay connected long enought for the restore to finish. However, once it was done, my iphone was on 5.1.1 and working perfectly. Hope this helps.

  • Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro

    Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro when plugged in with a dvi to mini dvi cable. Any ideas what to do to make it work? I lugged the 23" 2500 miles into the wilderness and I need help

    Okay, here's an update: the DVI to ADC adapter does work with the Apple displays that I have tried, but it won't work with the Formac. I have tried multiple time to contact them, but to no avail... they don't even respond to threats of posting my opinion of them, which is this:
    DON'T BUY ANYTHING FROM FORMAC! They make quality products, but their customer service is a big time joke! They won't take care of you.

  • How can I restore data from my iPhone after sync with macbook pro?

    I accidentally syncronized my Iphone with MacBook Pro on iTunes and lost all data from my phone (calendar, contacts, photos, etc.). Is there a way to recover that information? Thank you!

    Welcome to Apple Support Communities
    You cannot. However, you can solve this problem by setting the iPhone as a new device and upgrading iOS in Settings -> Software Update.
    After upgrading iOS, open Settings -> General -> Reset -> Erase All Content and Settings. Finally, Setup Assistant will let you restore the backup.

  • IPhone no longer syncing with Macbook/iPhoto

    Phone though synced to another Mac would handshake with Macbook and allow photos to be uploaded. No longer
    It also no longer appears in iTunes.
    Basically its not there as far as the Macbook is concerned and I'd really like to upload some photos. What gives? Used to do this no problem.
    TIA

    You can no longer sync via iTunes. That method of sync was removed (and the 1000+ post thread is arguments over things tangientally related to that).
    You need to sync via other means than iTunes, then.
    One option is to use iCloud. If you sign into iCloud on all your devices, and then make sure your calendars are in the "iCloud" section on your devices, they should sync.
    If you don't want to use iCloud, you could use Google calendars, they operate much the same way (but may be less reliable).
    Or if you use Exchange for work, you could sync that way.
    Or if none of those are acceptable, you could install OS X Server and set up the calendar server on your local network and use it to sync. This is fairly straightforward "for setting up a UNIX calendar server" but it's not trivial and beyond the scope of a forum post to explain it all

  • External hard drive compatible with macbook pro 10.5.8

    external hard drive compatible with macbook pro 10.5.8, i need a hard drive that will work with 10.5.8 to back everything up before upgrading to 10.6. a hard drive that is compatable with 10.5.8 has been impossible to find, a hard drive that works with both opperating systems is what i am looking for, any information that can help is appreciated

    You can buy just about any USB2.0 hard drive and use it with your MacBook Pro.  Many older external drives come pre-partitioned and formatted FAT32 for use on Windows.  Your Mac can use that file system as well, but it has limitations on file sizes.  You can always re-partition your external drive and re-format it as HFS+ (MacOS Extended Journaled) then your old Mac OS version and your new one should both be able to access it just fine.  One thing to keep in mind is that many older OSes don't really handle drives larger than 2TB well, so you would probably want to try to keep your external drive to something smaller than 2TB...

  • Is there any Sound card 5.1 include stereo mix that working with MacBook Air such as Creative Labs SoundBlaster X-Fi Surround 5.1 Pro Entertainment System ? and if there any another sound card can you tell me what is it please ? Thank you.

    Is there any Sound card 5.1 include stereo mix that working with MacBook Air such as Creative Labs SoundBlaster X-Fi Surround 5.1 Pro Entertainment System ? and if there any another sound card can you tell me what is it please ? Thank you.

    Okay, I did my best searching and I couldn't find anything that matched all your descriptors. I did do a search on both decoder numbers. SB0256 returned very little results, but with SB0466, I was able to find this ebay listing:
    http://cgi.ebay.com/ws/eBayISAPI.dll...6_fvi%3D&_rdc=
    This card isn't a Champion like you suggested. And with my complete lack of knowledge, I don't know what I/O dri've bay means. But since it is PCI and the decoder matches the number you gave me, this card should be adequete, right?
    Whether it works or not, my search indicated it might be very hard for me to find that card (or any PCI card for that matter). Everything I saw was out of stock. I know this is a forum for Creative, but are there any other manufacturers that will allow me to accomplish my goal, either with current cards, or discontinued cards? Thanks again
    Oh, and I will vote on that thread. I probably won't wait for them to release the decoder since I need it now, but I still believe Creative should be giving the customer what they want

  • Does Adobe Photoshop Elements work with MacBook Pro with Retina display?

    Does Adobe Photoshop Elements work with MacBook Pro with Retina display, please?
    Have searched Adobe website for answer - most recent is 2013 answer, saying no.
    Contradicted by a staff ember who only referred to Photoshop, not Elements.
    Reason I need it is that iPhoto does not support very high resolution photos - which I have now scanned onto my MacBook and do not want to re-scan!! After 90 minutes at my local Genius bar (lovely folk, very conscientiously searching for an answer...), re-scanning was their final piece of advice.
    Help, please...

    Hello Smis,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand you are having issues with your HP Monitor on your MAC. I am providing you with an HP Support document: Updating a Monitor Driver, where it states under the sub-heading Using HP monitors on a Mac "HP monitors are not supported in a Mac environment. However, newer Macs use graphics with VESA modes and can display to most HP LCD monitors. To do this, connect the monitor to the Mac while the Mac is off, and then turn on the MAC. The monitor should operate at 60Hz. The INF and software for the HP monitor are for Microsoft Windows and cannot be run in a standard MAC OS environment."
    This being said all I can advise is that you check to see that the monitor is set to operat at 60Hz and contact Apple for assistance if that does not get your monitor displaying correctly.
    I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Time Capsule works with MacBook Pro (Mavericks) but not with IOS devices?  recent problem starting March 1, 2015.

    I have a Time Capsule version 7.7.3 (model A1470) which has worked fine for almost 2 years with all devices, Apple and otherwise.  As of beginning of this month, March 2015 - no longer works with a new IPAD mini 3 and 6-month old iPhone 6 (both updated as of last night) BUT still works fine with MacBook Pro (Mavericks 10.9.5) and Epson printer XP-600. 
    On both IOS devices Airport Utility shows the Time Capsule and shows green light connection to internet, but never does the connection. The little status circle just keeps going round and never shows the Wifi rainbow symbol. both devices work fine on other Wifi's.  Airport Utility on iPhone actually connects enough to check on Airport base station's firmware 7.7.3 and says it is up to date!  but sadly stays on LTE.
    Have tried resetting, replugging etc...
    Also, tried checking on updates.  Nothing shows in Airport Utility. When I try to go to see past updates ~/Library/Application Support/Apple/AirPort/Firmware to see if updated, there is no Airport in the Apple folder?
    A mystery...

    Reset the TC to factory and redo the setup. see details below.
    Here is the typical list of things you should try.. and if this doesn't help post again.
    Factory reset universal
    Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
    Setup the TC again.
    ie Start from a factory reset. No files are lost on the hard disk doing this.
    Then redo the setup from the computer or perhaps it is better using iOS on the phone or ipad currently having issues.
    1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
    eg TCgen5 and TCwifi for basestation and wireless respectively.
    Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round. For iOS the fixed channels particularly for 2.4ghz has helped.
    2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
    3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place makes for poor networking. If the TC is main router it will not be an issue. This is a problem for a TC in bridge mode.
    If this is of no help.. what modem do you have? What function other than modem does it have.. ie none or router??
    How is the TC connected into the network? What function does it have? Router or bridge for example.
    Post a few screenshots of the setup.

  • I have just used air display with macbook pro. i have disconnected now from apple tv. but my laptop screen is still very small like its connected to the tv. this means all the tabs and writing is very small, how do i full disconnect my laptop?

    i have just used air display with macbook pro. i have disconnected now from apple tv. but my laptop screen is still very small like its connected to the tv. this means all the tabs and writing is very small. like the display down the bottom where al the applications are, is n the middle of the page and not spread down the bottom. this is seriously annoying! all the writing is every small and the tabs are small and its hard to read.  the air display link has disappeared from my computer. but the laptop screen is still very small. i want to know how do i get rid of this and return my macbook screen to its normal size. thank you

    Hello chrispyw,
    If your content is still being displayed incorrectly, I would check the resolution setting for the built in display with this article:
    OS X Yosemite: Adjust your display’s resolution
    If it keeps happening whenever you use AirPlay then I would use this section of the following article to reset the display system:
    Apple computers: Troubleshooting issues with video on internal or external displays
    Reset the system
    You can reset the Mac's parameter RAM and SMC.Reset the resolution
    Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
    Start up in Safe Mode.
    From the Apple () menu, choose System Preferences.
    Choose Displays from the View menu to open the preferences pane.
    Select any resolution and refresh rate that your display supports.
    Restart your computer.
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • What is the best external hard drive with MacBook Pro

    What is the best external hard drive with MacBook Pro?

    I agree with Allan, and that link is also called OWC, their hard drives are great.  Have three of their Mercury Pro Elite 2 TB quad interface drives.  They will connect eSATA, Firewire 800 & 400, USB2, so broad reange of options.  Drives seem to come Mac HFS formatted, but I always reformat and partition the drives.  Service and quarantees are top notch.
    They offer a wide range of drives/drive systems so like Allan said, spend some time seeing what the have.

  • Is it easily possible to synchronize mails sent from iphone 3GS with MacBook Pro retina

    is it easily possible to synchronize mails sent from iphone 3GS with MacBook Pro retina

    Read through this:
    http://clients.websavers.ca/whmcs/knowledgebase/115/Keeping-your-Sent-folder-in- sync-across-devices.html

  • Dual monitors with macbook closed

    i am running dual monitors with Macbook Pro and would like for my Macbook to be closed.  How do I change that setting?

    How do I change that to two separate extended screens.
    I don't believe you can. Check with Matrox, but my understanding is that the external monitors running through the Matrox box will always function as a single extended desktop in two parts.
    If you do check with Matrox about this, please post back with your findings — I'll be interested to know, whether I'm right or not.

  • Remote with macbook air

    can apple remote using with macbook air?

    No you cannot use it as the new Air does not have an IR port.
    So we have a great notebook, very slim and light - perfect for presentations. It just does not support the remote anymore - what a stupid decision!!!
    You might recommend to buy a third party product which works with bluetooth. When doing so, you forget the following:
    The original Apple Remote has a GREAT feature. You can pause a movie or flash animation which is placed into a slide at any time by pushing the PAUSE button. This is extremely helpful to explain something which is happening in your animation. This feature is gone now and this is a shame.
    Does anyone know how to overcome this problem?
    Thank you!!!

  • Pair apple remote with macbook air, pair apple remote with macbook air

    can any one please tell me how to pair apple remote control with macbook Air ????

    now, I had the same issue
    solved it by transforming my phone (Nokia 2700 c ) into a bluetooth remote
    see this pages:
    http://www.salling.com/Clicker/mac/devices.php
    http://torrentsmd.com/forum.php?action=viewtopic&topicid=87892828&page=p11032817 #11032817
    search in the list if the phone you have is compatible, then install the little program and you may even have a remote MOUSE by just clicking it on your phone
    PS. even if it yoru phone is not in the list there is a big chance that it will work, (mine wasnt in the list and it works like a charm) it is based on java if I understand corectly and most of the phones understand that programing language.

Maybe you are looking for

  • Error - 2048 not a valid movie file

    hello, I'm a NAPP member and had been following the photoshop TV casts on QT....however, now I get the error message 'error - 2048 not a valid movie file'...its an mpeg4 QT file, but I get the message whenever I attempt to play the downloaded file...

  • FLV file not showing up on page

    I am a novice with Dreamweaver. I created a site several years ago using just Contribute 2. Yesterday I used Adobe Media Encoder to encode some QTs to FLV (.f4v) files using a preset for Flash 8 compatible FLV files. I created a completely new html p

  • MM Inventory Management

    Hi Experts, Please can any one provide links related to MM INventory Mangagement. 2lis_03_bx, 2lis_03_bf, 2lis_03_um Regards, David

  • How i return back my purchase application i deleted by mistake under purchase topic in app store.

    how i return purchased game application on imac i deleted by mistake under purchse topin in app store. also i want to know how i updated when i recieve a massage to updated

  • My tool bar won't drop down when I'm online and I can't click out of tabs

    When I'm online, my tool bar won't drop down when I move my mouse to the top of the screen.  I have to keep pushing the ESC key until the screen finally minimizes.  Also, I no longer have the little x in the left corner of my tabs, I have to right cl