Mercedes Bluetooth does not recognize waits from Tour 9630

My Tour 9630 pairs with my Mercedes BlueTooth and my contacts transfer over but numbers with a wait inserted will not dial properly.  It appears that the Bluetooth recognizes the wait (w) as a pause (p).  When I hit send the Bluetooth dials right through all of the string of numbers without stopping or waiting.  I used this with other phones and never had any problems.  If someone know a fix I would appreciate it. 

No, can't find anything about BT in the Control Panel, it's like I wouldn't have any BT device at all installed.
I saw that the laptop comes with the Bluetooth Stack for Windows by Toshiba and I read in some Logitech forum that BT stack for windows by toshiba is not compatible with the logitech software (SetPoint)... so I don't know what to do next...

Similar Messages

  • ADE Does Not Recognize Import From Nook

    I have loaded some books directly from B&N to my nook. The file format that B&N uses is the ISBN number, dot epub. For example 97803454.epub. However, when I connect my Nook to my computer when ADE is open, I am not able to drag and drop the file to ADE; I get an error message that the document is licensed to another user. I can place the file in the ADE folder through Windows Explorer and then add the item to the library, and the item appears but under status, "errors" appears and I am not able to open the file. All I see in the library is the ISBN number.
    Is there a way to make this file recognizable in ADE.
    Thanks in advance for any assistance.

    ADE does not ( yet ) support books purchased from B&N.

  • My daughter changed her access code and forgot, how does she access it?  iTunes does not recognize it from the computer (it is registered in my user name).  HELP? Oh the nearest Apple Store is about 40 miles away.

    My daughter forgot her access code to her itouch.  Itunes can't access it when i plug it in.  it is registered under my id.  how do we reset the passcode without the passcode?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen        
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • Keynote 4.0.2 does not recognize documents from 4.0.1

    Since I upgraded to version 4.0.2, Keynote does not open documents created under version 4.0.1. The error message reads that I need a newer version of keynote to open the document.

    Welcome to the discussions, Cristiane.
    Do you also have iWork '06 still installed. If so, then rename Keynote in the iWork '06 folder so there's not two copies of a "Keynoe" app on your system.
    http://www.keynoteuser.com/news/?p=259

  • MBridge does not recognize files from the Nikon D 5000

    I have just bought a d 5000, but neither Bridge or Photoshop will recognize the File type, although they both had no problem with NEF from my d80

    NEF files from different models of Nikon have different files formats.
    To open the files for your new Nikon D5000 camera you need to have Camera Raw 5.4 beta hosted by Photoshop 11.0.1 (CS4).
    If you have CS4, download and run the ACR 5.4 Release Candidate installer and install it.
    http://labs.adobe.com/wiki/index.php/Camera_Raw_5.4
    If you do not have CS4, you cannot open the files from the new camera directly and you never will be able to, as there will be no further updates to older versions.  You will need to download the latest version of the DNG Converter 5.4 and convert your NEF files to raw DNG files first that you can then open in ACR 2.4 hosted by CS; ACR 3.7 hosted by CS2; or ACR 4.6 hosted by CS3.
    Note that Photoshop Elements is not directly supported by ACR 5.4 Release Candidate at this time, so you will have to go the DNG Converter 5.4 RC route if you only have Elements.

  • How do i connect my keyboard when it is turned on and the batteries are new, the bluetooth does not recognize it?

    I had a connection between my macbook pro and my wireless keyboard, when the keyboard stopped working.  I replaced the batteries, and it will no longer allow me to connect the keyboard.  In fact, my macbook no longer recognizes it at all when I try to reconnect via bluetooth.

    Yes, I've had a similar problem:
    My keyboard was connecting just fine except for recently when my son would switch to his user and then I would switch back after he finished his homework in another room in the house.
    Now I've restarted and there is no longer a Bluetooth option to click in System Preferences, and as I dig deeper into the Network option, I can click the Bluetooth PAN, but if I try to "add" a BT device or select "Advanced" the button is grayed-out and the message says BT is not available.
    The keyboard power cycles fine and is available to my iMac for pairing.
    My top of the screen menu bar shows the BT symbol, but tells me it's not available.  Whaaaat???
    Utilities' System Info tells me there is "no information available" when I click the BT devices under hardware.
    Somehow it appears I've either lost the BT drivers or the module has failed.
    Any suggestions??
    TIA, Bradley

  • Audition does not recognize audio from Lifecam Cinema

    I just connected my new cam but when I go into Audition's audio set up I cannot get it to work as the default input device.  It is listed in the control panel as an input device but even when I move it to the top and check it the default input device designation is greyed out.  Any ideas?

    Are you running Vista?  You might need to enable the device's audio input in the Sound Properties tool in Vista.  (You can get there by right-clicking on the speaker icon in the Vista system tray, and selecting Properties.)  Once enabled at the system level, Audition should be able to access it as an input.
    That would be my first guess as to the problem, since Audition sees the device okay, but doesn't recognize any input channels.  If that's not the case or if it still fails to work, please reply and we can continue to troubleshoot.

  • IPhoto  does not recognizes formate from Kodak digital camera, what do i need to do to import photos?

    I am trying to import pohotos from a Kodak digital camara Z1275 to iphoto and I recieve a message,"unrecognized format-file cannot be imported"  What do I need to do now?  I am new to the Mac. Moving from PC to Mac.

    There is an issue with Kodaks and Macs. Use a USB Card reader.
    Regards
    TD

  • I have the latest LR4 on a mac-mini with OS 10.9.2.  While I can work with raw images from my Canon 1DX and 5DIII. LR4 does not recognize images from my Nikon Df.  Solutions?

    Are there solutions?

    The Df needs at least LR 5.3, ACR 8.3 or DNGC 8.3 to be recognized.  So your choices are to upgrade LR4 to LR5.x and update that to at least LR 5.3, OR download the DNG Converter 8.4 and use it to convert your unsupported NEF files into DNGs that will be supported by LR4.
    Reference: http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html

  • Mat****a UJ841S CD/DVD drive does not read movies from blockbuster

    My dvd mat****a drive UJ841S will read /write everything ok.
    BUT it does not recognize Movies from Blockbuster. I cannot play a movie.
    Can anyone help?
    David

    Hi
    Seems this certain kind of DVD is not fully compatible with this CD/DVD drive
    Sorry but such issues are not uncommon you will always meet some disks which are not fully compatible and that the drives laser lens cannot handle such disk
    But just one question; are these movies created for the European region?
    I mean there are different DVD regions
    As far as I know the movies for European needs region 2
    The United States need region 1 settings and South & Middle America need region 4
    So if you would like to watch DVD designed for USA then you will have to change the region settings to 1.
    But note; you can change the region settings only 4 times then this settings would be locked and it would be not possible to change it again

  • MacBook does not recognize Treo 650 Bluetooth DUN!

    Hey gang-
    We got our new MacBook today. For some reason, it does not recognize the Bluetooth Dialup Networking (DUN) capability of my Palm Treo 650. I have no problem creating the trusted pair, and the MacBook and Treo discover each other no problem. But when I finish setting up the trusted pair, the Bluetooth Setup Assistant reports "There were no supported services found on your device"
    Now here's why I'm worried- In the exact same setup, my 1-year old iBook G4 recognizes and offers the choice of Bluetooth Dialup Networking from my Treo! Something is definitely different in Bluetooth support in the MacBook.
    Any got a MacBook to recognize Treo 650 DUN?
    Thanks!
    Dave

    I am having the same problem with both a brand-new Macbook and intel iMac. After going through setup identically to several other Macs around, I only get "There were no supported services found on your device." Bluetooth syncing works fine, but neither of the Intel machines will find the DUN. Powerbook G4 12in and iBook G4 12in both work fine with identical setup procedures. There is definitely something buggy here.

  • Lightroom says that I have the latest version, but Lightroom does not recognize RAW captures from my new Panasonic DMC-GH4. When will an update for this camera be available?

    Lightroom says that I have the latest version, but Lightroom does not recognize RAW captures from my new Panasonic DMC-GH4. When will an update for this camera be available?

    The GH4 must be very new as it’s not listed in Adobe’s supported cameras, so wait until the next version of LR.  Usually there is one every 3-4 months with a release-candidate available at Adobe Labs before that:  http://labs.adobe.com/
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html

  • Been trying to use an external memory card reader with my macbook air- connecting via usb port, air does not recognize device nor the microSD card from my gopro - help

    Been trying to use an external memory card reader with my macbook air… connecting via usb port, air does not recognize device nor the microSD card from my gopro … help

    Some external ones do not work with the Mac's although most do. There are some driver compadibility issues with Mavericks, so I would wait for an update.

  • We just added a new printer and bluetooth connection to our iMac.  Now iTunes does not recognize our iPads as devices.  Have already tried restarting everything.  Any other suggestions?

    We just added a new printer and bluetooth connection to our iMac.  Now iTunes does not recognize our iPads as devices.  Have already tried restarting everything.  Any other suggestions?

    You can try the steps recommended here: http://www.apple.com/support/ipad/assistant/itunes/

  • Adobe Lightroom, Photoshop and Bridge does not recognize the raw files from my Canon Mark III 5D Camera.

    Adobe Lightroom, Photoshop and Bridge does not recognize the raw files from my new Canon Mark III 5D Camera.  How can I get my files open to view and edit?  I am using LR3, Photoshop CS3 and Bridge CS3.  Do I need to upgrade these programs or is there another way to get these programs to recognize my files?
    When I try opening the raw images in Lightroom, the thumbnails say "Preview unavailable for this file"  ... when I click "import" an error message pops up that says "The files are from a camera which is not recognized by the raw format support in Lightroom."
    When I try opening the raw images in Photoshop, an error message pops up saying "could not complete your request because photoshop does not recognize this type of file."
    When I try opening the raw images in Bridge, it just shows an icon with the file name and CR2.
    Please help!!!

    Unless I missed an announcement, today, LR6 isn't available, yet, right?  Only Adobe employees and beta testers would know what LR6 does differently at this point and they're all sworn to secrecy.
    LR5 is available as a standalone version.
    PS-CS6 is available as a serial-number-licensed version.
    PS-CC + LR5 are also available as a Photography Plan subscription for $10/month with a minimum OS versions of OSX 10.7 (and probably 10.8, soon) and Windows 7.
    Bridge is part of PS, not a separate program.
    LR5 standalone and LR+PS-CC plan are both available on this page:  http://www.adobe.com/products/catalog/software.html
    PS-CS6 can be found on this page:  Creative Suite 6 which can be found by searching www.adobe.com for Photoshop CS6 and clicking the Buy link in the on-the-fly search results.
    As with any new Adobe software, it might be wise to run it in trial mode for a few days/weeks to see if it works well with your computer, before purchasing and finding out you might need a new computer, first.

Maybe you are looking for

  • DataSource 0CRM_SRV_PROCESS_H is not getting the data in infopackage

    Hi Masters, I have to upload the data from the datasources 0CRM_SRV_PROCESS_H and 0CRM_SRV_PROCESS_I into Infopackages, but when i execute the infockage it shows No data available Diagnosis The data request was a full update. In this case, the corres

  • Install and use WSP (FAB 40) in Sharepoint Foundation

    I am very very new to sharepoint and still learning. I was trying to set up a test one to see how it works. I come across "FAB 40" templates and want to give that a try. So I downloaded the "FAB 40" from the following link. And the installation struc

  • My iPod has a mind of its own. When it doesn't want to play, it stops.

    I am on my 2nd iPod in 5 months. The first was replaced b/c of defective video. No prob. The replacement has been plagued with frequent but random episodes of simply pausing. The iPod will be playing just fine and dandy, at perfect rest on the table

  • Will a Genius look at my computer?

    My iMac stopped working, it turned on but didn't load the hdd. My roommate was on the computer when it happened so I don't know what was done to it. I took it to Apple and the guy I saw plugged in an external and booted the computer from that, the co

  • Loading a blob from forms ?

    I would like to know if anyone has loaded a file into the database in a blob field with forms not using OLE in client server mode.