Mercedes User interface does not revert back after a call

I had my iPhone 4 paired to my Mercedes and was happily using the bluetooth connectivity for making and receiving calls .
But lately when I make a call by dialing from my phone and then disconnecting the call using the car control, the car screen does not revert back to what it was and it remains in the phone mode.
This does not happen when I pick up a call using the car control.
Any idea as to why this might be happening .

Uninstall then reinstall RNR. RNR does not like to be cancelled via task manager.... this creates a mess.
Reinstall may also fix your issue with productivity center..

Similar Messages

My ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix

my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
thanks!

The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.

MBP does not come back after hybernation

Hello everyone,
I am enjoying my MBP except for one problem. It does not come back after it hybernates sometimes.
I hit a key, hear the superdrive do it's "thing" and then after much waiting (approximately over 10 minutes) no picture or video on the screen!
I can tell that it's still powered on because it's plugged in and when I hit the Caps Lock key it lights on and off.
The only way that I can get it out of this state is to hold down the power button, unplug the power cord, take the battery out, hold in the power button for 4 seconds, reinsert the battery and power back on.
I have to then cycle the power back off because the first time it does not come back but I just get the blank white boot screen and no 'apple'.
When I turn it back on the second time, it boots up.
Anyone else have a problem with this?
Thanks for listening!
Mark

Hello Gweedo!
Yeah I have the same issue and am up to date. Apparently this is a pretty huge problem with the Macbook Pro since the last Graphics update after updating to 10.5.2.
http://discussions.apple.com/thread.jspa?threadID=1394449
I have been perusing through that topic and hopefully they will come up with a fix for this.
The only work-a-round that I have found (but haven't tested extensively yet) is to disconnect to the wireless, turn off blue tooth, disconnect my external monitor and then go into sleep mode. Then it always comes back. But if I leave it connected to the wireless, bluetooth, and external monitor - it's a crap shoot as to weather or not it will come back up.
This is pretty frustrating because half of using a laptop is being able to hybernate and sleep properly.
I even have the 'smartsleep' installed.
Thanks for commenting everybody!
Mark

Full Screen Does Not Come Back After Minimizing Firefox to the Taskbar.

Full Screen Does Not Come Back After Minimizing Firefox to the Taskbar.
I work in full screen almost exclusively ... the toolbar and the URL are still displayed while in full screen.
Before this version (30.0), when I minimized Firefox to the taskbar so that I could go to the desktop or to Windows Explorer, when I finished what I was doing and re-selected Firefox it would go back to full screen. Now, it does not go back to full screen. I can still see the taskbar. I have to press [f11] two more times to get back to full screen.
I have tried with and without addons enabled. Same behavior. I have reset Firefox ... same behavior.
I'm using Firefox 30.0 and Windows 7 (64 bit).
Thanks.

Hi moose53,
Just tested it with a Logitech keyboard and you are right, what you are describing is not expected behavior. I see you do not have any add ons, however does this also reproduce in Safe Mode? [[Troubleshoot Firefox issues using Safe Mode]]
If yes, try a new profile [[Use the Profile Manager to create and remove Firefox profiles]]

My brand new iphone 4gs from Sprints, is turning off whenever it wants and does not come back after 2 or 3 hours???,

My brand new iphone 4gs from Sprints, is turning off whenever it wants and does not come back after 2 or 3 hours???

Return it for a warranty replacement.

User Interface does not load SRP527W

Hi,
Apologises if this question has been asked before.
We have a SRP527W router, and for some odd reason the web interface does not load.
The device has been reset to factory defaults countless number of times and sometimes I can get in but than once you save something you cant get back in.
I have completed the following steps
1. Tested via multiple browsers, (Firefox, Chrome & IE)
2. Reset router to factory defaults
3. Router can be pinged on 192.168.15.1
4. Installed Firefox extention to test with previous IE versions
5. When I managed to get into the router, I ran a restore with a backup config that worked
6. Telnet function is blocked but dont have the ssh details. (tried: admin admin, admin password, cisco cisco, cisco password)
7. add http://192.168.15.1 to the safe list
The odd thing is sometimes the web interface loads and sometimes i just get a blank page.
Any suggestions?

You are welcome
Now that you are able to login, either move or delete enough files to get at least 10 GB free, 15 would be better.
A tool to help with that is OmniDiskSweeper.
Allan

HDMI does not come back after disconnect

Hello Archers,
this one is bugging me for a while now, perhaps someone has an idea.
I have a headless ARCH home server that mainly has the following purposes:
1. being a 24/7 file/backup/ssh server for family and friends
2. being an MPD server connected to my music system
The setup may seem a bit exotic. The computer is connected to the music system via HDMI over an S/PDIF audio extractor to the music system. This is because the machine replaced a RaspberryPi that really had crappy analog audio output and my music system has an optical input and can perform the digital to analog conversion itself. I have not installed Pulse just alsa and jack2-dbus.
aplay -l shows the following:
**** Liste der Hardware-Geräte (PLAYBACK) ****
Karte 0: PCH [HDA Intel PCH], Gerät 0: ALC887-VD Analog [ALC887-VD Analog]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 0: PCH [HDA Intel PCH], Gerät 3: HDMI 0 [HDMI 0]
Sub-Geräte: 0/1
Sub-Gerät #0: subdevice #0
The Problem:
Whenever I switch off the music system and later switch it back on, the HDMI-connection is lost and does not get reestablished. I tried various things but essentially only a reboot of the machine helps (which opposes purpose 1 of the machine). On the RaspberryPi I did not have that problem, probably due to the hdmi_force_hotplug=1 in /boot/config.txt.
My Observations so far:
The first problem that made the sound disappear was the screen blanker on the console after 10 minutes. This can be prevented with
setterm --term linux --blank 0 >/dev/tty1 # You need write permission on /dev/tty1 for this to work!
There are no appearant error or warning messages when using e.g. aplay or speaker-test, just no sound at all
There are tipps in the forums/the internet sugesting to disable power management on the display involving xset and xrandr. However, I have no X running and the tools complain that they cannot find/open the display
In /proc/asound/PCH/codec#2 I find the HDMI codec to show the following as long as it is connected after a reboot:
Codec: Intel Valleyview2 HDMI
Address: 2
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x80862882
Subsystem Id: 0x80860101
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
Power states: D0 D3
Power: setting=D0, actual=D0
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x02 [Audio Output] wcaps 0x6611: 8-Channels Digital
Device: name="HDMI 0", type="HDMI", device=3
Converter: stream=8, channel=0
Digital: Enabled GenLevel
Digital category: 0x2
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3
Power states: D0 D3
Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3
Power states: D0 D3
Power: setting=D0, actual=D0
Node 0x04 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Control: name="HDMI/DP,pcm=3 Jack", index=0, device=0
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Control: name="ELD", index=0, device=3
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=01, enabled=1
Power states: D0 D3
Power: setting=D0, actual=D0
Connection: 2
0x02* 0x03
Node 0x05 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x80]
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x58560020: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D3
Power: setting=D0, actual=D0
Connection: 2
0x02 0x03*
Node 0x06 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x80]
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x58560030: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x3, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D3
Power: setting=D0, actual=D0
Connection: 2
0x02 0x03*
Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono
After disconnect/reconnect it changes to this:
Codec: Intel Valleyview2 HDMI
Address: 2
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x80862882
Subsystem Id: 0x80860101
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
N/A
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
Power: setting=UNKNOWN, actual=UNKNOWN, Error, Clock-stop-OK, Setting-reset
Invalid AFG subtree
I figured that the problem is probably related to powermanagement, so I experimented with powertop. This resulted in a reduced consumption of 1W when idle, which is nice but did not solve the original problem...
The Questions
Is there a way to completely reinit the HDMI subsystem just like on a reboot?
Is there an option comparable to hdmi_force_hotplug=1 on the pi that forces the HDMI signal to stay up?
Thank You for Your time!
Best regards,
Lars

I can confirm what zofiel said. I have tested it by connecting a TV and HDMI reactivitated by switching from X to console. However, this option only works one time and requires X running in the first place, which I usually have not on a headless server, but it made me think: Obviousely the X server needs to activate the graphics in the first place. Then I came up with an idea for a really messy work around. I could try to remotely start X. Normally, this is not possible and you get:
% startx
/usr/lib/xorg-server/Xorg.wrap: Only console users are allowed to run the X server
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: server error
You can force it to work:
sudo startx
You get lots of error messages, but HDMI audio is back, even if one kills the X process afterwards with Ctrl+C (Audio stops, but resumes two seconds later). The downside is that starting X with sudo messes up permissions with the x related files in your home directory and you will have problems to use startx afterwards, so it is probably better to use su instead of sudo. If root does not have a properly configured .xinitrc file then one can also just execute the desktop environment directly e.g., for XFCE:
su - root -c "startxfce4"
Then kill it with Ctrl+C and you should have HDMI Audio working.
So now I could pack this in a script followed by some command to kill it, but, well, it is an ugly workaround
Is there really no better way?

Rescue & Recovery user interface does not open

I am using T400, few days ago, I used Rescue and Recovery program to make back up system, I wanted to save back up to external hard drive but I had put the location is C:\, after that I managed to cancel the process to modify the location in Preference of Rescue and Recovery program, but the process does not stop as I expected. Then, I used Task manager to stop the program, easily the program stop after few seconds. But from this time to now, when I start the program, the interface of program does not appear on screen, I try many ways to open it but all fail. I check in Task manager, the program running in a moment then it automatically end and disapear from task manager.
If anyone faced with this problem, please help me fix this. Thank you so much.

Uninstall then reinstall RNR. RNR does not like to be cancelled via task manager.... this creates a mess.
Reinstall may also fix your issue with productivity center..

Just started using firefox seriously. my user interface does not look like the one in the 'tour'. please help

i downloaded firefox a long time ago but havent used it extensively because i liked chrome. but recently chrome is just too difficult and if there is an issue i cant speak to anyone. so i am trying firefox. i went to take the user interface tour and there is suppose to be a button on the right hand side to help with bookmarks but my 'version' doesnt have that. was wondering how i get that and if i may have the wrong version.
also....i cant seem to find where to turn autofill on and right now its not working except with the occasional email address.
and one more thing....all streaming videos...tv, utube, art instruction..trailers...all get chunked up. nothing ever runs smoothly. and i am paying to get good download speed.
i would appreciate any help on these three issues.
thank you

About the bookmark button:
*[https://support.mozilla.org/en-US/kb/customize-firefox-controls-buttons-and-toolbars Customize toolbars]
About versions of Firefox:
*[http://www.mozilla.org/en-US/firefox/new/ Last Firefox Version]
About the videos:
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you.

GDM does not appear back after logging out from Gnome.

Hello,
I am tryingout Archlinux for the first time. I am able to goto run level 5 and after booting I get the GDM login screen. I can log in to Gnome. But when I log out from Gnome, GDM does not appear, but I get a black screen. Then, the only way to come out is to press the reset button.
What may be the problem?
Thanks for your help.
Anand

it may depend on how ur running gdm, (possibly with -*no-daemon option) .. in which case it'd prolly werk if u removed it...
although i'd recommend using rc.conf instead as it's a lot cleaner...
to use /etc/rc.conf
add gdm to the DAEMONS;
mine = "DAEMONS=(gdm @syslog-ng @network @alsa @httpd)"
that starts gdm(in daemon mode), then starts syslog-ng,net*,alsa and apache in the background .. save me about 6 seconds when i background em.
then you need to change the default runlevel in /etc/inittab to 3 (not 5)

ATM clock source does not revert back to priority with NCDP

We have an ATM network with 8540 and 8510 ATM switches. We have designed NCDP in such a way that that the priority 1,2,3,4 clock sources are the PABX. Priority 5 clock source is the internal system clock. Every few day we believe that there is a PABX issue whereby the clock fails over to the priority 5 internal system clock which is fair enough. But when the PABX clock becomes stable again the 85xx switches don't revert back to the PABX clock and stay using the internal system clock, although we have configured to revert. As a temporary work-around we have to remove and re-apply the ncdp commands for the 85xx to start using the PABX clock again.

The following example shows how to configure the network clock to revert to the highest priority clock source after a failure and takeover by the source with the next lowest priority.
Switch(config)# network-clock-select revertive
http://www.cisco.com/en/US/products/hw/switches/ps718/products_configuration_guide_chapter09186a00801eda20.html

Erlang: wx graphical user interface does not work in R16B-1

After upgrading erlang to R16B-1, the wx GUI subsystem does not work anymore.
1> wx:demo().
ok
=ERROR REPORT==== 5-Mar-2013::23:13:11 ===
ERROR: Could not find 'wxe_driver.so' in: /usr/lib/erlang/lib/wx-1.0/priv
Should I install some additional package that was not required before?
Or is this a bug with the new version?

This seems to be a bug with the new version.
See also: https://bugs.archlinux.org/task/34201
Last edited by xyproto (2013-03-08 19:59:03)

Samsung NP305V5A: Screen does not come back after resume

The issue: screen does not turn ON when resuming from suspend-to-ram. PC fans start working. I can even "gently" reboot the notebook, by pressing <Ctrl>+<Alt>+<F1>, then <Ctrl>+<Alt>+<Del>. But the screen does not work..
Note: resume worked with the Catalyst driver (but this blob has many other glitches...)
$ lspci | grep VGA
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] BeaverCreek [Radeon HD 6520G]
02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Seymour [Radeon HD 6400M/7400M Series]
Video driver: radeon
Kernel parameters: root=/dev/sda2 rw radeon.dpm=1
(note: radeon.dpm=1 helps a lot; before kernel v3.11 I could not use radeon at all)
/etc/X11/xorg.conf.d/20-radeon.conf
Section "Device"
Identifier "Radeon"
Driver "radeon"
Option "ZaphodHeads" "VGA-0"
Option "ColorTiling2D" "false"
EndSection
not sure if the following is usable, but still:
$ lsmod | grep video
uvcvideo 72900 0
videobuf2_vmalloc 3280 1 uvcvideo
videobuf2_memops 2343 1 videobuf2_vmalloc
videobuf2_core 28027 1 uvcvideo
videodev 111140 2 uvcvideo,videobuf2_core
media 11751 2 uvcvideo,videodev
i2c_core 24164 6 drm,i2c_piix4,drm_kms_helper,i2c_algo_bit,radeon,videodev
video 11196 1 samsung_laptop
usbcore 179880 6 uvcvideo,ohci_hcd,ohci_pci,ehci_hcd,ehci_pci,usbhid

Hi moose53,
Just tested it with a Logitech keyboard and you are right, what you are describing is not expected behavior. I see you do not have any add ons, however does this also reproduce in Safe Mode? [[Troubleshoot Firefox issues using Safe Mode]]
If yes, try a new profile [[Use the Profile Manager to create and remove Firefox profiles]]

Screen resolution does not change back after using a projector

Hi!
My office uses several different models of macbooks, but there is a small problem with all the Airs. When I have been using them with a projector I have to change back the screen resolution manually (go to the system settings and change resolution). On the macbook pros, however, the desktop restores themselves as soon as the projector is disconnected. It seems to me that this should be the standard behaviour of all macs, does anyone know why it is not working on the Airs?
Best regards
Erik

Hi Erik,
I had this problem on a MacBook and resolved it by recreating some plist files.
~/Library/Preferences/ByHost/com.apple.windowserver.xxxxxxxxxxxx.plist
~/Library/Preferences/ByHost/com.apple.preference.displays.xxxxxxxxx.plist
The xxxx's are your machine's EthernetID (MAC Address). I wouldn't delete, rather just move them to your Desktop and restart the computer. See if that resolves it.

Satellite A30 does not come back after hibernation.

If I don't touch the keys for 10 mins or so my laptop goes into hibernation. It will normally come back when I touch a key or the touch pad but sometimes nothing I do can get it back. I have to turn it off and then back on again. I was wondering if anyone had any ideas?
I looked at the power management and I can turn off all hibernation but I like it to hibernate when I close the lid so is there any way to make it so it ONLY hibernates when I close the lid and at no other time?

HI Clare,
In the Toshiba Power Management utility you should click on the 'advanced' tab and about half way down the resultant window you should see an option for the action to be taken when you close the lid of your SA30.
Make sure that this is set to 'hibernate'. Then go to the power save modes and click on the 'details' tab and then the 'Power Save Mode' tab and make sure that the 'Hibernate' option is set to 'never'.
With these settings your notebook should go into 'hibernate' when you close the lid but not at any other time.
Note that you can set the notebook to hibernate when running on battery when the bttery capacity reaches a pre-set value of your own choosing.
regards,

Mercedes User interface does not revert back after a call

Similar Messages

Maybe you are looking for