Mercedez Benz COMAND System not recognizing iPhone 5 after iOS 8 update, can we expect the same result with iPhone 6 or 6 plus?

Mercedez Benz COMAND System not recognizing iPhone 5 after iOS 8 update, can we expect the same result with iPhone 6 or 6 plus?
I'm planning to purchase the 6 plus, but I need to know from where.whom will the fix for this problem emerge.

My new iPhone 6 paired perfectly with my Mercedes system.  That said, on your iPhone 5, reset your network settings and then try to pair it again.

Similar Messages

  • I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud  how can I use the phone again with ALL my pictures and videos without restoring it?

    I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud  how can I use the phone again with ALL my pictures and videos without restoring it?

    Contacts are designed to be synced to a supported application on the computer or a cloud service.
    Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
    If you have failed to use the device as designed it may be too late to recovery anything.
    Is the device regularly backed up to a computer via iTunes?  If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created.

  • TS3648 great, but my MBA did not come with an installion disc, only a tiny jump drive that is not recognized by windows; and I can't get the contents of that burned to a DVD either. So how the heck do I get the drivers into Windows 7? My MBA has bootcamp

    great, but my MBA did not come with an installion disc, only a tiny jump drive that is not recognized by windows; and I can't get the contents of that burned to a DVD either. So how the heck do I get the drivers into Windows 7? My MBA has bootcamp 3.0.4.

    Here's what I get:
    lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
    inet 127.0.0.1 netmask 0xff000000
    inet6 ::1 prefixlen 128
    inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
    gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
    stf0: flags=0 mtu 1280
    en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    ether 00:11:24:7d:e7:1e
    media: autoselect (none) status: inactive
    supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback>
    en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    inet6 fe80::211:24ff:fe28:2e71%en1 prefixlen 64 scopeid 0x5
    inet 169.254.115.141 netmask 0xffff0000 broadcast 169.254.255.255
    ether 00:11:24:28:2e:71
    media: autoselect status: active
    supported media: autoselect
    fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 2030
    lladdr 00:11:24:ff:fe:7d:e7:1e
    media: autoselect <full-duplex> status: inactive
    supported media: autoselect <full-duplex>

  • After infrastructure restart, we must do the same (restart) with middle tie

    After infrastructure restart, we must do the same (restart) with middle tier?
    We have 2 nodes, one with infrastructure and the other with the middle tier (bi and forms).
    After a failure in the node that contain the infrastructure and restart it, we need to restart the middle tier in the other node, or the middle tier instance follow alive and continue work ok after infrastructure is up and runing?
    Tx four your help!
    Diego.

    The correct start'n'stop orders are:
    Start
    Start Infrastructure
    Start Mid-Tier(s)
    Stop
    Stop Mid-Tier(s)
    Stop Infrastructure
    The Mid-Tier depends on the infrastructure (sso, repository database etc) and must always be stopped before stoppen the infrastructure.
    The Application Server is a complex product, just like the database, so please do not skip reading basic notes and documents. If you're a administrator please consider takeing the five days training. The information above could be found in Application Server Install Guide, Administrators Guide etc.
    Regards,
    Martin Malmström

  • App Store on the iPad (iOS 6), can you view the Top Charts for iPhone?

    In the App Store on the iPad (iOS 6) can you view the Top Charts for iPhone? It used to be possible in a previous version of iOS.

    disregard post.

  • IPhone 4S not recognized/charging after iOS 6.0.1 update

    Hi,
    I've upgraded my iPhone 4S to iOS 6.0.1 when the updates became available on my handset and everything seems to work fine until I plugged it into my iMac for some late-night development with XCode. It wasn't recognized/charging at all. At first, I thought the connector cable was faulty, but using the provided Apple charger and the same cable, charging was working....
    This morning, when arriving at work, I upgraded an iPhone 4 (the previous generation) to iOS 6.0.1 and plugged it into my work iMac: Same issue.
    It seems that upgrading the iOS version to 6.0.1 disable synching/charging on my iMac.
    Verified on:
    - iPhone 4 + iMac 27in Mid-2010 running Mountain Lion 10.8.2
    - iPhone 4S + iMac 27in Mid-2010 running Mountain Lion 10.8.2
    I have no iPhone 5 available yet, so I cannot verify it, but it seems that something is amiss.
    Beware of iOS 6.0.1!

    Let's do a little recap:
    - Do not detect in iTunes/XCode on my iMac Mid-2010 running Mountain Lion 10.8.2 (Both 4 and 4S)
    - Do not charge when plugged-in on my iMac Mid-2010 running Mountain Lion 10.8.2 (Both 4 and 4S)
    - Soft Reset from the phone does not work (Only tried on iPhone 4)
    - Hard-Reset from the phone does not work (Only tried on iPhone 4)
    - DFU Mode will not trigger the iTunes. (Only tried on iPhone 4)
    Perhaps it is not widespread, but it is annoying. Especially when the iPhone 4 is my work phone and I need it to deploy/test my App before submitting to the App Store!

  • TS3694 Error 3194, trying to resore iphone after ios update

    After downloading the new ios to my iphone 4g, the apple just keeps slowly flashing on and off. Itried to restore the phone, but it said it could not be resored, error 3194. Can anyone help?

    This usually occurs because you previously used an iOS hacking utility such as tinyumbrella.
    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software and ensure that communication to gs.apple.com is allowed. Follow these stepsfor assistance with security software.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow theadvanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

  • HT1386 how to resync iphone after ios update

    I updated the iphone to ver 5.1. backup up the data and via sync feature itunes to computer.  Files are on computer but won't sync back to iphone.

    Have an iphone 4.  I upgraded from ver 4.2 to 5.1.  I backup the device via itunes and all the music, apps, books, etc copied to the computer.  In the final phase of the itunes sync process it transferred data back to phone i.e. calendar, email, voicemail and messages.  I can't seem to figure out how to transfer the music, apps, books, etc back to the iphone from the computer

  • Replacement Ipod 1.4 not recognized on PC and Updater "Can't mount Ipod"

    I just received a replacement Ipod mini 1.4 which is formatted for Mac. When I run the most recent version of the updater, I get an error message that states "Can't mount IPod".
    My Ipod no longer shows up in the "My computer" menu when I connect it to my PC, the only place it shows is in the actual usb hub in the device manager.
    I tried all the actions in the following link to no avail (http://docs.info.apple.com/article.html?artnum=61711).
    Please help!
    Note: I am leaning toward the illiterate side of computer literacy so please bear with.
    2nd Generation Ipod mini 1.4   Windows XP Pro  

    the same thing happened to me, and no, itunes doesn't recognize it.
    ephpod also doesn't recognize it, and neither does ipodwizard. i removed itunes and installed 6.0.5 and that also doesn't recognize it.
    i downloaded an older ipod updater exe (from 3-23, before it became integrated into itunes 7) and even that won't recognize it.
    i went back to itunes 7, and when i run an itunes diagnostic i get all green lights except the bottom, which means itunes can't tell that it's hooked up.
    but i see it in my computer, and the details still say that it has the data on it.
    also, when i try to use it normally there are no songs on it. the details say 0 songs, etc, but still says 22gb of space taken.
    i'm running windows xp, service pack 2, itunes 7, and am using a 5g 30gb video ipod. the ipod says that it is firmware version 1.2

  • Facetime on iphone and a mac can i use the same apple id

    i have a mac and iphone 4. I can receive facetime on my phone (email address) but not the mac. so i tried to change the facetime settings on my phone so that i receive facetime by phone number but it wont change. Im led to believe it email address for mac comp and mobile number for iphone
    please please help im so hacked off trying to get them to work

    Using FaceTime
    http://support.apple.com/kb/ht4319

  • Using the same keyboard with iPhone and MacMini. Neat!

    So Folks,
    I bought a wireless kb and it works with both my iPhone and my mac. (not at the same time of course).
    This is how you can do it too:
    1) Sync the kb with the iPhone first
    2) Turn off the phone's BT and sync the kb with your Mac.
    3) Whenever the computer is off, you can press the KB power button to use it with the iPhone
    4) To use the kb with your mac, turn off the iPhone's BT. Press the KB power button while you start your computer. (You can turn the iPhone's BT on again as soon as the kb begins to work with the Mac).
    5) You can repeat steps 3 or 4 at will. So two devices one kb. Neat!
    Regards

    Hello:
    A BT device may only be connected to one thing at a time.  To switch to another device, one needs to delete it from the one it is currently connected to.
    Barry

  • HT204407 "Location Not Available" label for one friend and they have the same result for finding me. The issue has not been resolved from reading this article.

    I always get 'Location Not Available' for one of my contacts in the Find My Friends app. This same friend get's the same message when trying to find me. The app and the iOS software on both iPhones is up to date, the dates and time on both iPhones are correct and both iPhones are in the UK where the Find my Friends service works fine.
    There is one condition in which we can see where each other is and that is by having the app open on both phones, this is unlike all my other  contacts within the Fnd my Friends app where I can see where they are despite the app not being open on their devices. Can anyone help? It's really bugging us.

    For those who are experiencing ongoing issues with their web services, you can attempt to try the following steps that may
    help resolve your problems.
    1.) Completely shut down your printer and restart it
    2.) If you have prints that have not printed, log into ePrint Center (or create an account if you do not have one) and
    then look for your printer status. If printer status is green but you still have pending jobs, delete the pending jobs one at
    a time (Starting with the oldest first). There may be a print job stuck in the queue that further restricts other jobs from
    completing.
    a. If option 1 or 2 above still doesn’t work, removing web services and re-adding web services will cause the printer to
    reattach to the cloud.
    b. Please note that if you attempt option 3, you will get a new eprint email address (and lose your custom one with no
    ability to get it back) furthermore, you will need to re-add your printer back to your ePC account.
    I am an HP employee

  • I am trying to set up my internet connection with my iphone 5 and the hotspot. I had no problem using the same computer with iphone 4. i am unable to do it and get an IP address conflict

    I have a new iphone 5 with a personal hotspot. Am trying to establish wifi connection and get this message on my laptop. Network error, another computer is using the same IP address.

    A free app called Fing will tell you what devices are connected to your network and what IP addresses they are using. Rebooting/resetting each of your devices will probably resolve things.
    tt2

  • How can i resolve the wifi problem with iphone 4s?

    please help me, i update my iphone to ios 6.1 beta 5 but the wifi problem continues!

    Why don't you try some basic troubleshooting instead of ranting about how someone else should solve a problem that's specific to YOUR phone.

  • Microphone not working FaceTime after iOS update.

    Hello everyone.  First post here.
    I just updated to the newest version of iOS, and my microphone is no longer working.  On Facetime, I can see/hear my family but they can't hear me.
    Note: I tested with recording something with QuickVoice and the microphone works perfectly.  It's just on FaceTime that it's not working.
    Any tips?

    Hi AKCarroll,
    Thanks for visiting Apple Support Communities.
    If your iPhone microphone is not working with FaceTime calls, start with the tips in this article:
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Best Regards,
    Jeremy

Maybe you are looking for

  • Dump Error

    Dump Msg                                                                                 With ABAP/4 Open SQL array select, the output table is too small.                                                                                What happened?  

  • How can I use an iPad with two itunes accounts?

    How can I use an iPad with two itunes accounts? Hi there My partner has a works iPad, which has her works Apps on (ones that are specifically made by her company and are NOT available in the App store). What I want to be able to do is to ALSO have my

  • Setting up new mac soon

    We will be adding an iMac to the house hold in few days. This computer will be primarily for our young children, though we will use it occaionally. Currently we have an iBook and an Airport Extreme network. I am prepared to create accounts for our ch

  • MS OFFICE 2014 Converting Problems

    I have just bought Adobe XI Pro, I am also using MS OFFICE 2014. When I save Word file as 2014 format and convert it to PDF , On header & footer section , if there is a picture or shape behind  writings, writings are  not been shown when converted. I

  • Connect mysql database php

    I HAVE HOST ON YAHOO AND THIS SCRIPT DOSN'T WORK WITH YAHOO can u help me .... <?php # FileName="Connection_php_mysql.htm" # Type="MYSQL" # HTTP="true" $hostname_midcommerce = "localhost"; $database_midcommerce = "DATABASE"; $username_midcommerce = "