Mercury Hardware Acceleration disappears when upgrading from CS6 to CC.

I have an iMac (27-inch Mid 2011 AMD Radeon HD 6770M 512 MB) with 16gb of memory.
I upgraded Premiere from CS6 to CC. I had mercury hardware acceleration support on CS6. The acceleration option has disappeared following my upgrade to CC.
Have tried this on two machines now.
Can anyone help? Am I missing the obvious?
Ian.
PS. I first posted this in the CC forum. And was, quite rightly, told to post it here…. :-)

They actually didn't raise it. It's always required 1GB.
http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-premiere-pro.html
It seems an error of sorts that it worked with less on Macs. That's been 'corrected'.

Similar Messages

How do I transfer all of my Preferences, etc. when upgrading from CS6 to CC

Hello,
I just decided to upgrade today from CS6 to CC. After downloading Premier Pro CC, I notice that NONE of my Preferences, Sequence Presets, Media Export Custom Presets, Effects Presets were carried over to the new version of CC.
Surely, I do not have to manually re-create all of these presets/settings.
Can someone please tell me there is an easy way to get everything transfered over from CS6 to CC?
Thank you,
Robert

The best option is to use Migration Assistant to restore your data from the old computer, and as you have a Time Machine backup of the old MacBook, use that backup.
The link from where you have posted this question gives you the steps to transfer files from another Mac, but transferring files from a Time Machine backup is even easier. To do it, just connect the Time Machine disk to the new computer and then, open Migration Assistant (it's in /Applications/Utilities) and follow the steps.
When Migration Assistant finishes, you will have a new user with the data you have restored from your backup, so go to  > Log Out and log in the new user. If you want more information about that process, read > http://pondini.org/OSX/MigrateLion.html
If you haven't set up the new computer yet, you can restore the backup through Setup Assistant. See > http://pondini.org/OSX/SetupLion.html

What happens to plug-ins for Premiere Pro when upgrading from CS6 Production Premium to CC?

If I upgrade from CS 6 Production Premium to CCloud, what happens to the plug-ins currently installed in Premiere Pro? Will I lose them (some Red Giant, Synthetic Aperture and such)?

Not only that, there was an internal code change when going from CC to CC2014
http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html
This messages says (at least some) CC 2014 programs use NEW plugins https://forums.adobe.com/thread/1499663
-so do not uninstall the older CC programs if you use plugins in your programs until you are sure you have plugins that work in CC2014
If you are sure you don't need the old CC programs
-http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall
-read reply #3 about the ORDER of uninstalling & installing https://forums.adobe.com/thread/1242671

Keeping plugins when upgrading from CS6 to CC

I just went from Snow Leopard to Mavericks on my mac pro and so I am also upgrading from Premiere Pro CS6 to CC. I'm curious if there is an easy way to make sure all of my plugins come along for the ride. Or, do I just need to check all my plugins, write a list of what I have and then after I install CC, install everything from my plugin list?
thanks,
Mike

Some plugins have new installers for CC.
Some you can just copy from CS6 to CC.

Custom Reports Snapshots Disappeared when upgrading from 2011 to 2013

Hi all,
We are in the process of upgrading our CRM 2011 instance to CRM 2013. Both instances are on premises and use separate servers (SQL, front-end,etc...). This is how we went about it:
- installed CRM 2013 on a new server using a different SQL server than the one used by the CRM 2011 installation.
- took a backup copy of the CRM 2011 database and restored it on the CRM 2013 server
- imported the CRM 2011 organisation on the CRM 2013 installation using the deployment wizard
- the import went without any errors
Now for the issue we are experiencing:
- in the CRM 2011 we have several custom reports snapshots which were then used for subscriptions via SRS
- the custom reports have been imported OK into the 2013 deployment when we imported the organisation
- the custom reports snapshots have not been imported into SRS although they are listed in the CRM user interface under the reports section. When trying to run the reports from the CRM user interface an error message is displayed that the requested does
not exist (as expected as the file does not exist on SRS)
Any assistance would be much appreciated.

Hi Jeffki123,
I can reproduce it as you describing. Based on my understanding, the task pane is drawed by Word applicaiton, the Word applicaiton need to make task pane fit the current version of Office.
>>Is there anyway to control the font size of the custom task pane title?<<
No. As far as I konw, we can only change the size and postion of custom task pane. You can get more detail about the task pane from links below:
Custom Task Panes
CustomTaskPane Interface
I suggest that you submit the feedback from link below, if you want to Word expose this function to enable change the font size of custom task pane.
Submit Feedback - Microsoft Support
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

All photos disappeared when upgrading from iPhoto 4 to Photo 8.

Yesterday I bought a new MBP 2.5 GHz 15" to substitute my older laptop, an iBook G4 12". In that iBook I used the original iLife package bundled, including the iPhoto 4. All my pictures were stored in an external hard drive, into an iPhoto Library folder.
I used Migration Assistant to transfer all my data from that iBook to my new MBP, through Firewire. Everything went nice except for few programs that weren't universal which I'm still fixing.
When opening the new iPhoto in this MBP, it asked for the iPhoto Library Folder, and I indicated the old folder located at my external hard drive. After selecting it, appeared a dialog box saying that the new iPhoto Library folder wouldn't be readable in older iPhoto versions, and I selected ok. Than it created all my albums inside nicely but to my surprise (and despair) all my pictures were gone. To make things worse, I don't have backup of those hi-res, only the ones formated to my iPhone that I already recovered from it.
I don't know what to do, and I'm desperate since invaluable data from years worth are simply gone because of a stupid upgrade that Apple made. I can't understand how Apple didn't make and option to duplicate the iPhoto folder or ask if I wanted to backup it before upgrading if there was such a risk.
Since this happened I tried to recover the data using Data Rescue II, and I haven't cleaned the trash yet, but I can't find the files. If someone could please give me a suggestion I would really appreciate it.

Migration Assistant is known for not handling iPhoto libraries very well. I suggest you copy the old library again but this time manually and put it in the Pictures folder. Thendownload and run BatChmod on the iPhoto Library folder with the settings shown here, putting your administrator login name in the owner section and Staff in the group section. You can either type in the path to the folder or just drag the folder into that field.
After that's complete open iPhoto and let it convert the library again.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Display Driver has stopped responding and has recovered. bsod if I use mercury hardware acceleration

Hi, I bought a cheap NVIDIA card to go alongside my GTX285 to allow me to use a third monitor for timeline playback. I've done this before with an ati card with no issues but needed to change to a single height card to get the extra slot back.
It installed it's drivers and then whenever I opened premiere CS6 it would immediately hang and blue screen. I removed the card and rolled back to old drivers but no change. NVIDIA support gave me beta drivers but no change either. They suggested that my card or motherboard was faulty. (Motherboard is a EVGA Sr2) Eventually I found I can edit normally if I turn off hardware acceleration for the mercury playback engine and leave it as software only. Not much use when my GPU supports CUDA.
Even now the display driver keeps giving me the "stopped responding" message with or without premiere open so I'm thinking there is some hardware issue somewhere. The Blue screen only occurs when I use mercury hardware acceleration.
I have ordered a GTX470 because I can't afford to spend hundreds on a 690 etc.
The current driver version is 306.97, error occurs in CS5 and CS6
Any suggestions would be appreciated. Thanks, Michael.

The reason the ATI card worked was because that is completely 2 separate drivers. That makes it easier for the OS to sort out the device ID's although that can cause issues with some applications and the ram shadowing done by Win 7 compositing mode. However when you use 2 Nvidia GPU's, the drivers are essentially the same as far as what the OS see's but they have completely different support for things like Direct X. This often can cause major issues with drawing out on the screen. The other issue is the 2 cards may not have resource charts that are far enough apart to avoid resource issues. If you cant return the 470 card then you may want to try a 1GB 620 card for the 2nd video card and see if that will work. That will minimize the resource shadowing and hopefully run the 600 series card in the Direct X version the 400 series card will run.
Eric
ADK

Lost bootcamp capability when upgrading from OS X Mavericks to OS X Yosemite 10.10?

When upgrading from OS X Mavericks to OS X Yosemite 10.10 while dual booting with Windows 7 on my bootcamp partition, I can't access the Windows partition any more. When I restart my computer and hold the alt key the only drives that are shown are my Mac OS X and Recovery (usually there is the bootcamp drive there too). Does anyone have any solutions? I can still access my windows 7 files from within my Mac partition weirdly enough. And if there aren't any solutions, is bootcamp broken on Yosemite? Is it safe to redo the process and put a fresh Windows 7 or Windows 8 partition back on bootcamp again? I'm not tech savvy enough to understand all of the coding components so if you want to walk me through it you can, or just provide a simple explanation, any help is grateful. Thanks for your help.

Welcome To Discussions Dedesu!
Here is some additional info.
Tiger is available for purchase at The Apple Store (U.S.).
If you know what to look for, a Full Retail Version, of the Panther Install CDs, or a Full Retail Version, of the Tiger Install DVD, can also be purchased rather inexpensively, at some additional online Apple retailers, like Amazon, FastMac, etc, and as posted, eBay.
As also posted, be sure not to purchase grey, upgrade or machine specific CDs or DVDs. They will not work.
Panther is only on CDs, not DVDs.
Unless purchased from AppleRescue, the discs should look exactly like the images in the above links, and not say Upgrade, CPU Drop-in DVD, or "This software is part of a hardware bundle purchase - not to be sold seperately." on them.
Additional info here Using OS X Install CDs/DVDs On Multiple Macs.
Once Panther 10.3.x is installed, you can use the 10.3.9 Combo Update, to upgrade to the final version.
If your Mac meets the Tiger System Requirements, you could also consider installing that, and then use the PPC 10.4.9 Combo Update, to upgrade to the current version.
Panther Install & Upgrade Hints
Additionally, "Tiger ships on a DVD, but if your Mac doesn’t have a built-in DVD-ROM player, you’ll need CD media."
AppleRescue, also sells a Tiger installation set on CD.
Shop Carefully, Examine All Documentation, And I Wish You Success!
ali b

How to transfer data & apps,When upgrading from a iPhone 3G to an iPhone 4 or soon 5

When upgrading from a iPhone 3G to an iPhone 4 or soon 5
How to transfer all phone number and apps and notes, pretty much copy my old iPhone to my new iPhone , all content and apps.
Will it transfer my text messages also?
Is this a nightmare or an easy task?

Connect to iTunes and backup. Then when you receive the new phone restore from that backup.
http://support.apple.com/kb/ht1766
http://support.apple.com/kb/ht1414

Error ORA-03113 when upgrading from 11.2.0.1 to 11.2.0.3

I keep on getting this error when upgrading from 11.2.0.1 to 11.2.0.3
[Thread-57] [ 2012-04-20 13:18:28.207 CEST ] [SummarizableStep.genSummary:409] Generating Summary for:=Pre Upgrade ,status is:=Successful
[Thread-57] [ 2012-04-20 13:18:28.208 CEST ] [SummarizableStep.genSummary:409] Generating Summary for:=Oracle Server ,status is:=Failed
oracle.sysman.assistants.util.step.StepExecutionException: ORA-03113: end-of-file on communication channel
Upgrade failed due to running the step "Upgrading Oracle Server"
        at oracle.sysman.assistants.dbma.backend.component.SubComponent.executeSubStepImpl(SubComponent.java:738)
        at oracle.sysman.assistants.dbma.backend.component.SubComponent.executeStepImpl(SubComponent.java:585)
        at oracle.sysman.assistants.dbma.backend.component.Component.executeStepImpl(Component.java:317)
        at oracle.sysman.assistants.dbma.backend.SummarizableStep.executeImpl(SummarizableStep.java:183)
        at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
        at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
        at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2708)
        at java.lang.Thread.run(Thread.java:637)
[Thread-57] [ 2012-04-20 13:18:28.209 CEST ] [SummarizableStep.executeImpl:212] Throwing exception e from SummarizableStep
[Thread-57] [ 2012-04-20 13:18:28.209 CEST ] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@4805e9f1
oracle.sysman.assistants.util.step.StepExecutionException: ORA-03113: end-of-file on communication channel
Upgrade failed due to running the step "Upgrading Oracle Server"
        at oracle.sysman.assistants.dbma.backend.component.SubComponent.executeSubStepImpl(SubComponent.java:738)
        at oracle.sysman.assistants.dbma.backend.component.SubComponent.executeStepImpl(SubComponent.java:585)
        at oracle.sysman.assistants.dbma.backend.component.Component.executeStepImpl(Component.java:317)
        at oracle.sysman.assistants.dbma.backend.SummarizableStep.executeImpl(SummarizableStep.java:183)
        at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
        at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
        at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2708)
        at java.lang.Thread.run(Thread.java:637)
[Thread-57] [ 2012-04-20 13:18:31.000 CEST ] [CompManager.isModeSet:9822]   DB Upgrade Mode Setting := 1
[Thread-57] [ 2012-04-20 13:18:31.001 CEST ] [CompManager.isModeSet:9823]   Mode := 1 is set
[Thread-57] [ 2012-04-20 13:18:31.001 CEST ] [SQLEngine.done:2189] Done called
[Thread-57] [ 2012-04-20 13:18:31.001 CEST ] [Database.getStepSQLInterface:787] OH in database: /app/oracle/product/11.2.0.3/db_1Any clues about what could be wrong? I am planning to upgrade with the manual steps if it does not work :(

Pl post OS details - are you using DBUA to upgrade ? Are there any errors in the database alert log ?
ORA-00600 [kodpunp-nulltds], ORA-00600 [kokeeiix1], [600] When Upgrading To 11GR2 [ID 1367827.1]
HTH
Srini

When upgrading from OS X lion to OS X mountain lion will it automatically uninstall OS X lion

when upgrading from OS X lion to OS X mountain lion will it automatically uninstall OS X lion?

Yes. You download Mountain Lion from the App Store and, once the download is complete, the installation of Mountain Lion will begin. You can quit it at this point and backup the "Install OS Mountain Lion.app" (which I suggest) the double-click it and begin the installation.
All remnants of Lion will be gone and you'll be running Mountain Lion.
Good luck,
Clinton

Best practice for Smartview when upgrading from Excel 2003 to Excel 2007?

Does anyone know the best pratice for Smartview when upgrading from Excel 2003 to Excel 2007?
Current users have Microsoft Excel 2003 with Smartview 9.3.1.2.1.003.
Computers are being upgraded to Microsoft Excel 2007.
What is the best pratice for Smartview in this situation?
1. Do nothing with Smartview and just install Excel 2007.
2. Install Excel 2007 and then uninstall and reinstall Smartview
3. Uninstall Smartview, Install Excel 2007, and then install Smartview
4. Somthing else??
Thanks!

We went with option 1 and it worked out fine. Be aware that SV processes noticeably slower in Excel 2007 than 2003. Many users were/are unhappy with the switch. We haven't tested SV v11 yet, so I'm not sure if it has improved performance with Excel 2007 or not (hopefully it does).

When upgrading from osx 10.7.4 to osx mountain lion I get the following Alert! This update requires OS X version 10.8.

When upgrading from osx 10.7.4 to osx mountain lion I get the following Alert! This update requires OS X version 10.8.

Sounds like you downloaded the 10.8.1 update instead of the Mountain Lion installer from the Mac App Store.
You have to purchase Mountain Lion from the App Store to get to 10.8

How do I save itunes when upgrading from osx4 to osx5 ?

how do I save itunes. bookmark, when upgrading from osx4 to osx5?

When you upgrade attached to iTunes a backup copy is made...then after the upgrade the backup is used to restore all the content to your iDevice, assuming you are actually talking about upgrading from iOS 4 to iOS 5.

Any Guidelines/Documents: when upgrading from BW 3.x to Netweaver 7.0?

Hi,
Any Guidelines/Documents: when upgrading from BW 3.x to Netweaver 7.0?
Thanks

hi Amanda,
this should help a lot
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10564d5c-cf00-2a10-7b87-c94e38267742
also check
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d163a7-0301-0010-d9b0-98f692ea3c60
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2e8e5288-0b01-0010-2ea8-bcd4df5084a7

Mercury Hardware Acceleration disappears when upgrading from CS6 to CC.

Similar Messages

Maybe you are looking for