Mercury Playback Engine does not work in new PP 2014 release?

Hi everyone, I've just downloaded the new 2014 version of PP to get the following message whilst uploading a project I've been working on:
'This project was last used with mercury playback engine GPU acceleration (cuda), which is either not available or not certified on this system. Mercury playback engine software only will be used'.
So, I make a trip to the playback settings in the preferences and there is just no option to switch on mercury playback. I have an Nvidia GeForce GTX 760 and up until now I've never had to render a single thing on my system no matter how many effects I've had to apply (working with raw DSLR footage). Now I'm getting dropped frames and red lines all over my sequence? Is there a way to remedy this in the new version of PP? If not I'll be uninstalling it and sticking to the older release.
Thanks in advance for any help,
Kevin

My bad, I was looking in the wrong place. I've now changed it to GPU acceleration and it's working fine!

Similar Messages

PP CS6 doesn't recognize my Quadro FX 4800 for Mac graphics card but my trial PP CC does. When I open CS6 the Mercury Playback engine is grayed out. In PP CC the Mercury Playback engine is not Grayed out. I have the latest Nvidia driver & Cuda driver. Do

I installed PP CS6 on a Mac OS 10.10.2, installed latest drivers for Nvidia Quadro FX 4800 graphic card including Cuda driver. The Mercury Playback Engine is grayed out. But when I open an installed trial version of PP CC the Mercury Playback engine is not grayed out. Do I have a problem with CS6 software?? Thanks for any input you can offer.

If your nVidia card has at least 1Gig of video ram, use the nVidia Hack http://forums.adobe.com/thread/629557 - which is a simple entry in a "supported cards" file - and Mac http://www.vidmuze.com/how-to-enable-gpu-cuda-in-adobe-cs6-for-mac/

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed?

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed? I am using Firefox Beta for android and I also tried just Firefox.

Please check the Play Store app for any Flash updates and install them if present.

Home sharing does not work with new mountain lion update.

home sharing does not work with new mountain lion update. Does anyone else have the same issue. Updated all computers in my home, deauthorized and reauthorized each computer. turn off home sharing and turned it back on. don't know what else to do..please help...

Our Apple TVs continue to lose connection ever since installing Mountain Lion on the host computer. The only thing that fixes them is to quit and relaunch iTunes, which only works unti the ATV goes to sleep. If a movie is paused for more than a few minutes and the ATV goes to sleep, pressing play again on the remote is greeted with "There are no movies on this computer" or "Turn on Home Sharing."
If we stop a video on one ATV and attempt to resume it in another room, the error begins again. The other ATV can't connect until iTunes is relaunched.
My guess is that it has something to do with the new [annoying] security settings. But I still haven't found a fix other than restarting iTunes everytime we want to watch something from our downloads. Fail.

Bridge CC Tools - Photoshop - Batch does not work in Photoshop CC 2014.

in Bridge CC Tools - Photoshop - Batch does not work in Photoshop CC 2014. At first I didn't even see the option but I reinstalled Photoshop CC and now I see the menu option but when I try it there is a message that I need to use Photoshop CC. So I open Photoshop CC and the same thing happens? I can't seem to make it work.

Kitty,
Your screen shot is in the virus scanning queue, where it can linger for minutes, hours, days or weeks.
If you use the camera icon in the reply editor's formatting bar, you can embed your image in your post, where it will be viewable instantly.
then:
As for your issue, make sure all applicable scripts are checked in Bridge preferences:

Negative (to inline a letter or to thin it) offset path does not work in Illus-CC 2014 (when preview is on- nothing happens). How can I get this to work like in previous versions.

Negative (to inline a letter or to thin it) offset path does not work in Illus-CC 2014 (when preview is on- nothing happens). How can I get this to work like in previous versions.

Thanks for your quick reply. I tried a number of different values. Usually when I do a negative offset they're very small values, like -.25 or -.5.
An Update- I took the art work into Ai CS 6 and It still did not work, which is really strange. And I've used it hundreds of times with success in the past. Also I tried it with live type and outlines, ungrouped, un-compounded still could not get it to negative offset.
Thanks for the help.

Mercury Playback Engine GPU not available

I've been reading through forum postings and have not found a solution, so I apologize if there is a solution posted elsewhere.
I have a 27" iMac (late 2012) with NVIDIA GeForce GTX 680MX graphics card running Mac OS 10.8.5.
I'm using Adobe Premiere Pro CS6.0.3, and when I updated my OS to 10.9 Maverick, I began to experience several problems, including:
The dreaded spinning beachball and "Premiere not responding."
"This project was last used with Mercury Playback Engine GPU Acceleration (CUDA) which is not available on your system. Mercury Playback Engine Software Only will be used.
Video files - I think they were all .MOV - became "squished" to the top of the Program Monitor (movie only took up about 1/3 of program monitor window).
After a long chat with Adobe Support, he indicated that the update to 10.9 Maverick was the problem, so I:
Updated to Premiere 6.0.5, but that did not fix any of the issues.
Logged in as "Root," which worked for a while but I also received 3 "Premiere encountered problem and must shut down."
Deleted preferences, repaired permissions, basic troubleshooting practices, etc, but problems persisted.
No help.
Eventually I restored my computer from a Time Machine backup to a day prior to the OS 10.9 update, and this seemed to fix all the issues. So I was back to Mac 10.8.5 and Premiere 6.0.3.
But the .MOV-compressed-in-the-program-monitor problem began to surface again (see photo below).
So I updated to Premiere to 6.0.5 (but not my OS - it's still 10.8.5), and the "Mercury Playback Engine" error is back.
And the .MOV files are still compressed in the Program Monitor. I have a project that I completed in 6.0.3, but is now messed up in 6.0.5.
Help please. Is the only solution downgrading to Premiere 6.0.3, and if so, must I do a clean install of the program from the DVD?
Thanks,
RW Harris, Director of Training
Express Oil Change & Tire Engineers
Birmingham, AL

harris1966 wrote:
Thanks so much for your quick responses.
@Kevin, the strange thing is this: Express purchased this iMac and the Adobe Creative Suite back in January of this year, and the computer and software have worked flawlessly since that time.
It was only after upgrading, first to Mac OS 10.9 Mavericks (which I later downgraded back to 10.8.5), and then to Premiere 6.0.5, that I began experiencing problems.
Prior to these upgrades, I never received the "Missing Renderer" message, nor did I experience any lagging problems or problems relating to .MOVs in the Program Viewer.
Hi Randy,
I'm sorry. I really don't know the answer to your question, or how that happened. All I know is that the card is not supported for CS6. I guess we have a mystery on our hands.
harris1966 wrote:
Any insight on why I never experienced problems until upgrading software?
Sorry, it is behaving as if your text file was hacked prior to you receiving the computer. After you updated the OS, a new text file without your card was created. Your card would not be listed in that file because it is not supported.
harris1966 wrote:
Are you saying that PP doesn't support NVIDIA 680 MX cards "now that the software is at 6.05"? Or PP doesn't support that card at all, under any software version?
The card is supported for Premiere Pro CC, but not prior to that.
harris1966 wrote:
Again, thanks so much for your help.
You're welcome!
Thanks,
Kevin

Encrypt Message does not work with new Plug-in 7.3

I installed the new Email Security Plug-in 7.3 but now the Encrypt Message button does not work. It is grayed out and unavailable when I attempt to create a new message.
I first tried installed 7.3 over the previous version but every time I opened Outlook I received an error message about XML not loading. I uninstalled the plugin, rebooted and installed it clean and that took care of the XML message. But I then found the encrypt button issue and have not been able to solve that issue. This is not isolated to my machine as I have tried installing it on another machine that never had the plug-in installed before.

My understanding is that they completely rewrote it, which is probably why an upgrade doesn't work well...
I did get one way of deploying figured out, the stuff on page 3-20 has some errors.
Here's what I did that works:
     Do a clean install on a machine that doesn't have any plugin installed.
     Copy the C:\Users\All Users\Cisco\Cisco IronPort Email Security Plug-In\Common directory and its contents to a network accsible share, say \\fs1\share\pluginconfig, so you now have \\fs1\share\pluginconfig\Common, etc...
     Copy your BCE_Config_Signed.xml file to the Common folder
     Rename that to config_1.xml
     Edit the CommonEncryptionConfig.xml to have the following XML:
      Now you can push the install with a command line that references the folder (the example on page 3-20 is wrong, no 's' ):
            CiscoIronPortEmailSecurity-7-3-0-102.exe /exenoui /qn UseCustomConfig="\\fs\share\pluginconfig"
       (if you're doing it on the same machine you did the clean install with, you should uninstall it first...)
Message was edited by: Ken Stieers

EPrint does not work after new wifi router on Verizon DSL

I have been using ePrint on my iPod, iPad, and iPhone for a few months without a problem, but recently had to switch to a new wifi router on my Verizon DSL, as my wifi kept turning off and Verizon's solution was an updated wifi router. Since the switch, I cannot ePrint from my mobile devices. I can, after reconfiguration, print from my laptops. The ePrint app still finds the Deskjet 3050a, says "sending to printer", but will not print. The ePrint is turned on. I tried to delete the app and reinstall in hopes that I can start fresh, but it still does not work. I tried to add a new printer, with the email supplied on the ePrint screen on the printer, but nothing.
Any ideas?

Hi Honor Student
Is your printer connected to the new router as it sounds like it is still looking for the old one ? Maybe just disconnect it and reconnect it again to your new router and then the ePrint APP should pick it up.
I work for HP.
Thanks
Caroline
Although I am a HP employee, I am speaking for myself and not for HP.

Ipod does not work with new usb

i got my computer cleaned and a usb 2.0 pci card put in and now my ipod does not work with it, can anyone help

tell me what you mean and i will tell. i ask the guy in the shop to remove any viruses and put my files in order and also put winzip on, ad-ware se peronal and windows defender. and to install a usb2.0 pci card, so that i can put music onto my ipod faster. is this enough for you

JRE 1.3.1_02 does not work with new Nvidia drivers - HELP!

I am a user and not a developer but this problem really does bite the big one. I have had installed JRE 1.3.1 and have used it to run LimeWire file sharing program for a long time (LimeWire is a java program from www.limewire.com) and also use it to see java applets on web pages in IE 6.
I have since upgraded my Nvidia video drivers to version 2.8.3.2 which is the latest official release at this time from Nvidia. Since doing this I have no java at all anymore. Limewire refuses to run at all and there is an error report generated in it's resident directory. If I go to http://java.sun.com, IE hangs and then dissappears, leaving a bug report on my desktop. It seems that JRE does not like the new NT OpenGL dll at all in the new Nvidia drivers and will not run at all. The dll that causes the problem is:
C:\WINDOWS\System32\nvoglnt.dll
I upgraded JRE to version 1.3.1_02 because Sun says this is the latest version and runs on XP which is what I have. Still java does not run at all anymore and I get the same bug reports. Has anyone found a workaround for this problem? This really stinks because now I cannot use LimeWire at all and if any web page has java on it, it dissappears right away and there is no more browser on my desktop. The only way I can even visit http://java.sun.com is if I use a Java blocking applet to filter out java applets on web pages.
Please address this issue in JRE development and release a patch for it or a workaround.
Thank you for reading this.
[email protected]
System Info:
Microsoft Windows XP Professional
Sun JRE 1.3.1_02
GeForce 2 MX AGP video card with 32Mb VRAM
Intel Pentuim III 800Mhz Coppermine
1Gb PC 133Mhz SDRAM
Java generated bug report:
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION occurred at PC=0x69564306
Function name=(N/A)
Library=C:\WINDOWS\System32\nvoglnt.dll
NOTE: We are unable to locate the function name symbol for the error
just occurred. Please refer to release documentation for possible
reason and solutions.
Current Java thread:
 at sun.awt.Win32GraphicsDevice.getDefaultPixID(Native Method)
 at sun.awt.Win32GraphicsDevice.getDefaultConfiguration(Unknown Source)
 at sun.awt.windows.WToolkit.resetGC(Unknown Source)
 at sun.awt.windows.WToolkit.<clinit>(Unknown Source)
 at java.lang.Class.forName0(Native Method)
 at java.lang.Class.forName(Unknown Source)
 at java.awt.Toolkit$2.run(Unknown Source)
 at java.security.AccessController.doPrivileged(Native Method)
 at java.awt.Toolkit.getDefaultToolkit(Unknown Source)
 at sun.awt.GlobalCursorManager$CursorEvent.<init>(Unknown Source)
 at sun.awt.GlobalCursorManager.<clinit>(Unknown Source)
 at java.awt.Cursor.initIDs(Native Method)
 at java.awt.Cursor.<clinit>(Unknown Source)
 at java.awt.Window.<init>(Unknown Source)
 at java.awt.Frame.<init>(Unknown Source)
 at java.awt.Frame.<init>(Unknown Source)
 at javax.swing.JFrame.<init>(Unknown Source)
 at sun.plugin.ConsoleWindow.<init>(Unknown Source)
 at sun.plugin.JavaRunTime.getJavaConsole(Unknown Source)
 at sun.plugin.JavaRunTime.showJavaConsole(Unknown Source)
 at sun.plugin.AppletViewer.initEnvironment(Unknown Source)
Dynamic libraries:
0x00400000 - 0x00419000 C:\Program Files\Internet Explorer\iexplore.exe
0x77F50000 - 0x77FF9000 C:\WINDOWS\System32\ntdll.dll
0x77E60000 - 0x77F45000 C:\WINDOWS\system32\kernel32.dll
0x77C10000 - 0x77C63000 C:\WINDOWS\system32\msvcrt.dll
0x77D40000 - 0x77DCD000 C:\WINDOWS\system32\USER32.dll
0x77C70000 - 0x77CB0000 C:\WINDOWS\system32\GDI32.dll
0x77DD0000 - 0x77E5B000 C:\WINDOWS\system32\ADVAPI32.dll
0x77CC0000 - 0x77D35000 C:\WINDOWS\system32\RPCRT4.dll
0x772D0000 - 0x77333000 C:\WINDOWS\system32\SHLWAPI.dll
0x71700000 - 0x71848000 C:\WINDOWS\System32\SHDOCVW.dll
0x71950000 - 0x71A34000 C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.0.0_x-ww_1382d70a\comctl32.dll
0x773D0000 - 0x77BC4000 C:\WINDOWS\system32\SHELL32.dll
0x77340000 - 0x773CB000 C:\WINDOWS\system32\comctl32.dll
0x771B0000 - 0x772CA000 C:\WINDOWS\system32\ole32.dll
0x5AD70000 - 0x5ADA4000 C:\WINDOWS\system32\uxtheme.dll
0x60000000 - 0x6004C000 C:\WINDOWS\System32\MSCTF.dll
0x75F80000 - 0x7607C000 C:\WINDOWS\System32\BROWSEUI.dll
0x72430000 - 0x72442000 C:\WINDOWS\System32\browselc.dll
0x75F40000 - 0x75F5D000 C:\WINDOWS\system32\appHelp.dll
0x76FD0000 - 0x77048000 C:\WINDOWS\System32\CLBCATQ.DLL
0x77120000 - 0x771AB000 C:\WINDOWS\system32\OLEAUT32.dll
0x77050000 - 0x77115000 C:\WINDOWS\System32\COMRes.dll
0x77C00000 - 0x77C07000 C:\WINDOWS\system32\VERSION.dll
0x63000000 - 0x63094000 C:\WINDOWS\system32\WININET.dll
0x762C0000 - 0x7634A000 C:\WINDOWS\system32\CRYPT32.dll
0x762A0000 - 0x762AF000 C:\WINDOWS\system32\MSASN1.dll
0x76F90000 - 0x76FA0000 C:\WINDOWS\System32\Secur32.dll
0x76620000 - 0x7666E000 C:\WINDOWS\System32\cscui.dll
0x76600000 - 0x7661B000 C:\WINDOWS\System32\CSCDLL.dll
0x76670000 - 0x76754000 C:\WINDOWS\System32\SETUPAPI.dll
0x75A70000 - 0x75B13000 C:\WINDOWS\system32\USERENV.dll
0x10000000 - 0x10008000 C:\Program Files\Adobe\Acrobat 5.0\Reader\ActiveX\AcroIEHelper.ocx
0x75E90000 - 0x75F31000 C:\WINDOWS\System32\SXS.DLL
0x1A400000 - 0x1A479000 C:\WINDOWS\system32\urlmon.dll
0x63580000 - 0x63824000 C:\WINDOWS\System32\mshtml.dll
0x01500000 - 0x01588000 C:\WINDOWS\System32\shdoclc.dll
0x74770000 - 0x747FF000 C:\WINDOWS\System32\MLANG.dll
0x76400000 - 0x765FB000 C:\WINDOWS\System32\msi.dll
0x746F0000 - 0x74719000 C:\WINDOWS\System32\msimtf.dll
0x605D0000 - 0x605DF000 C:\WINDOWS\System32\mslbui.dll
0x5C2C0000 - 0x5C303000 C:\WINDOWS\ime\sptip.dll
0x018D0000 - 0x0192B000 C:\Program Files\Common Files\Microsoft Shared\Ink\SKCHUI.DLL
0x746C0000 - 0x746E7000 C:\WINDOWS\System32\MSLS31.DLL
0x32520000 - 0x32532000 C:\Program Files\Microsoft Office\Office10\msohev.dll
0x1C000000 - 0x1C009000 C:\Program Files\AIM95\idlemon.dll
0x71C20000 - 0x71C6F000 C:\WINDOWS\System32\netapi32.dll
0x71B20000 - 0x71B31000 C:\WINDOWS\system32\MPR.dll
0x75F60000 - 0x75F66000 C:\WINDOWS\System32\drprov.dll
0x71C10000 - 0x71C1D000 C:\WINDOWS\System32\ntlanman.dll
0x71CD0000 - 0x71CE6000 C:\WINDOWS\System32\NETUI0.dll
0x71C90000 - 0x71CCC000 C:\WINDOWS\System32\NETUI1.dll
0x71C80000 - 0x71C86000 C:\WINDOWS\System32\NETRAP.dll
0x71BF0000 - 0x71C01000 C:\WINDOWS\System32\SAMLIB.dll
0x75F70000 - 0x75F79000 C:\WINDOWS\System32\davclnt.dll
0x73D70000 - 0x73D82000 C:\WINDOWS\System32\shgina.dll
0x75970000 - 0x75A61000 C:\WINDOWS\System32\MSGINA.dll
0x76360000 - 0x7636F000 C:\WINDOWS\System32\WINSTA.dll
0x1F7B0000 - 0x1F7E1000 C:\WINDOWS\System32\ODBC32.dll
0x763B0000 - 0x763F5000 C:\WINDOWS\system32\comdlg32.dll
0x1F850000 - 0x1F866000 C:\WINDOWS\System32\odbcint.dll
0x5A500000 - 0x5A58D000 C:\WINDOWS\System32\wiashext.dll
0x70D00000 - 0x70EA0000 C:\WINDOWS\WinSxS\x86_Microsoft.Windows.GdiPlus_6595b64144ccf1df_1.0.0.0_x-ww_8d353f13\gdiplus.dll
0x73BA0000 - 0x73BB2000 C:\WINDOWS\System32\sti.dll
0x74AE0000 - 0x74AE7000 C:\WINDOWS\System32\CFGMGR32.dll
0x71AD0000 - 0x71AD8000 C:\WINDOWS\System32\wsock32.dll
0x71AB0000 - 0x71AC5000 C:\WINDOWS\System32\WS2_32.dll
0x71AA0000 - 0x71AA8000 C:\WINDOWS\System32\WS2HELP.dll
0x71A50000 - 0x71A8B000 C:\WINDOWS\system32\mswsock.dll
0x71A90000 - 0x71A98000 C:\WINDOWS\System32\wshtcpip.dll
0x76EE0000 - 0x76F17000 C:\WINDOWS\System32\RASAPI32.DLL
0x76E90000 - 0x76EA1000 C:\WINDOWS\System32\rasman.dll
0x76EB0000 - 0x76EDA000 C:\WINDOWS\System32\TAPI32.dll
0x76E80000 - 0x76E8D000 C:\WINDOWS\System32\rtutils.dll
0x76B40000 - 0x76B6C000 C:\WINDOWS\System32\WINMM.dll
0x722B0000 - 0x722B5000 C:\WINDOWS\System32\sensapi.dll
0x76F20000 - 0x76F45000 C:\WINDOWS\System32\DNSAPI.dll
0x76FB0000 - 0x76FB7000 C:\WINDOWS\System32\winrnr.dll
0x76F60000 - 0x76F8C000 C:\WINDOWS\system32\WLDAP32.dll
0x76FC0000 - 0x76FC5000 C:\WINDOWS\System32\rasadhlp.dll
0x6D370000 - 0x6D37D000 C:\Program Files\JavaSoft\JRE\1.3.1_02\bin\npjava131_02.dll
0x6D130000 - 0x6D15A000 C:\Program Files\JavaSoft\JRE\1.3.1_02\bin\beans.ocx
0x6D300000 - 0x6D316000 C:\Program Files\JavaSoft\JRE\1.3.1_02\bin\jpishare.dll
0x6D420000 - 0x6D4F0000 C:\PROGRA~1\JavaSoft\JRE\132DB1~1.1_0\bin\hotspot\jvm.dll
0x6D220000 - 0x6D227000 C:\PROGRA~1\JavaSoft\JRE\132DB1~1.1_0\bin\hpi.dll
0x6D3B0000 - 0x6D3BD000 C:\PROGRA~1\JavaSoft\JRE\132DB1~1.1_0\bin\verify.dll
0x6D250000 - 0x6D266000 C:\PROGRA~1\JavaSoft\JRE\132DB1~1.1_0\bin\java.dll
0x6D3C0000 - 0x6D3CD000 C:\PROGRA~1\JavaSoft\JRE\132DB1~1.1_0\bin\zip.dll
0x6D020000 - 0x6D129000 C:\Program Files\JavaSoft\JRE\1.3.1_02\bin\awt.dll
0x73000000 - 0x73023000 C:\WINDOWS\System32\WINSPOOL.DRV
0x76390000 - 0x763AA000 C:\WINDOWS\System32\IMM32.dll
0x6D1E0000 - 0x6D21B000 C:\Program Files\JavaSoft\JRE\1.3.1_02\bin\fontmanager.dll
0x5ED00000 - 0x5EDC6000 C:\WINDOWS\System32\OPENGL32.dll
0x68B20000 - 0x68B3E000 C:\WINDOWS\System32\GLU32.dll
0x73760000 - 0x737A5000 C:\WINDOWS\System32\DDRAW.dll
0x73BC0000 - 0x73BC6000 C:\WINDOWS\System32\DCIMAN32.dll
0x69500000 - 0x69816000 C:\WINDOWS\System32\nvoglnt.dll
0x76C90000 - 0x76CB2000 C:\WINDOWS\system32\imagehlp.dll
0x6D510000 - 0x6D58C000 C:\WINDOWS\system32\DBGHELP.dll
0x76BF0000 - 0x76BFB000 C:\WINDOWS\System32\PSAPI.DLL
Local Time = Wed Apr 03 18:51:17 2002
Elapsed Time = 13
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.3.1_02-b02 mixed mode)

Chuck,
I stumbled in here looking for help, I am a PC user,
not a coder or developer (How sad. <g>). I checked for
updates to the Nvidia driver (none), Windows XP (not
at this time), and DirectX 8.1 (not at this time,
these come on the XP updates page so far as I know.)
Not too suprising...
I have no idea of how to implement your suggestion on
how to disable the JMV use of DirectX overal in my XP
envornment. I guess that using Internet Explorer 6 to
see web pages with Java on them are pretty much out of
the question for now but I would be happy as a clam if
I could get my LimeWire application going again.
LimeWire is called via a desktop or Start menu
shortcut in this fashion:
Target Box: C:\WINDOWS\system32\javaw.exe -cp .
RunLime
Start In (directory): "C:\Program Files\LimeWire 1.7"
So it appears that java is called via the javaw.exe
file and passes a cp argument (whatever that is), then
there is a period separator (dunno why) and then the
"RunLime" statement that calls up the LimeWire
program.to implement the suggestion, simply add -Dsun.java2d.noddraw=true between "javaw.exe" and "-cp" separating it from them by a space on each side. Your result should look something like this:
c:\windows\system32\javaw.exe -Dsun.java2d.noddraw=true -cp . RunLime
>
I cannot see any need for fancy graphic acceleration
or DirectX being called to play for this application
since it is basicly a file manager that shares.
Nothing fancy about it.It's not the application choosing to do this, but Java itself. Java GUI applications specifically those who use the Swing GUI classes (like LimeWire, if I recall) automatically leverage DirectX. This is really valuable for Swing applications since they emulate Windows (or Mac or Motif) GUI widgets rather than using them, making fast access to display buffers important to ensure best performance.
>
Do you have any idea of how to pass your
"-Dsun.java2d.noddraw=true" statement to disable
DirectX into the above call to start java and
LimeWire?See above.
>
Hanging by the edge of my seat, waiting for more input
on this. Thank you for your time and suggestions.
Paul

Multicast rtmp - rtmfp republish does not work (always new netgroup)

publish an multicast video stream with fmle 3.2
start the multicast stream - stop - start
fml should use the old netgroup
log file
http://paste.railsbox.eu/show/669/

Hi John,
Thank you for your reply. Better late than never! Am glad I
got a response :-)
It does indeed sound like a caching pb on the server and that
was my initial request the net admins. Unfortunately did not work.
In the meantime I made my case to the net admins that I needed
admin rights to the Roboengine in order to succesully reach my job
objectives and after a some time they accepted :-).
I looked closer and really could not figure out what the pb
was: all the new files were physically there but the TOC, index and
CSH does not update. Accessing the project locally rendered the
same pb.
My only solution was to delete and republish. Worked fine.
Perhaps somebody could test this behaviour in a different
environment and see what they get?
Steps to reproduce:
1°) Create an RH project (e.g. Project1.XPJ), create
TOC, index and CSH and publish to the server using a name (e.g.
Project).
2°) Create another RH project (e.g. Project2.XPJ) create
TOC, index and CSH (different to the first one) and publish to the
server using the name as the initial project (i.e Project).
- Chris.

Auto focus in Safari Yosemite does not work on new tab.

Creating a new tab in Safari does not auto focus the address bar. I need to Cmd-L to activate the address bar. This is annoying because I usually create a new tab to enter a search. Is this a bug or working as intended?

OK! I've found the error by myself. The XML file I am trying to update is not schema valid. Infact I've registered the schema with this call:
begin
dbms_xmlschema.registerSchema(
'PurchaseOrder.xsd',
getdocument('PurchaseOrder.xsd'),
TRUE,TRUE,FALSE,TRUE
end;
So the first three lines of the XML file must be:
<PurchaseOrder
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:noNamespaceSchemaLocation="PurchaseOrder.xsd">
and not
<PurchaseOrder
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:noNamespaceSchemaLocation="HTTP://localhost/sys/schemas/REF5/PurchaseOrder.xsd">
I think it is better not to register the schema with relative URL...
Bye!

Application written with JavaScript does not work in newer versions of Firefox

I am unable to upgrade past Firefox 3.6 because an application we use does not appear to work properly any any newer version. The application is CA Service Manager and is based on JavaScript. The pages display properly, but none of the links in the pages seem to work. When I click on a link, nothing happens. I have tried restarting in safe mode and resetting the profile, but neither of those helped any. Is this just a setting I need to change?

Would you be able to at least provide a link to the site you are having issues with, so that more experienced users can crack a shot at it? If not, please open a support ticket directly with the Mozilla team. There should be a "Report broken site" function in the Help menu of Firefox as well.

SAP J2EE Engine : does not work !!!

Hi everyone,
I have installed SAP NW2004s Java SP9 Trial (on Windows XP and Sapdb as database). The installation finished without problems.
But when I start my SAP system, the SAP J2EE engine (process jcontrol) is still stopped
[... I have already searched in the forum, but I have not found a solution to my problem ...]
Here is the contents of files dev_jcontrol & dev_sdm :
File dev_jcontrol : *************************************
trc file: "D:\usr\sap\J2E\JC01\work\dev_jcontrol", trc level: 1, release: "700"
node name : jcontrol
pid : 1384
system name : J2E
system nr. : 01
started at : Mon Dec 03 15:23:56 2007
arguments :
 arg[00] : D:\usr\sap\J2E\JC01\exe\jcontrol.EXE
 arg[01] : pf=D:\usr\sap\J2E\SYS\profile\J2E_JC01_ahassaine
[Thr 2356] Mon Dec 03 15:23:56 2007
[Thr 2356] *** ERROR => Can't open property file [D:\usr\sap\J2E\JC01\j2ee\cluster\instance.properties] [jstartxx.c 725]
[Thr 2356] *** ERROR => Can't open property file [D:\usr\sap\J2E\JC01\j2ee\cluster\instance.properties] [jstartxx.c 1952]
[Thr 2356] *** ERROR => JStartupReadArgumentsEx: can't enumerate nodes [D:\usr\sap\J2E\JC01\j2ee\cluster\instance.properties;D:\usr\sap\J2E\JC01\SDM\program\config\sdm_jstartup.properties] (rc = -1) [jstartxx.c 524]
File dev_sdm : *************************************
trc file: "D:\usr\sap\J2E\JC01\work\dev_sdm", trc level: 1, release: "700"
node name : sdm
pid : 1360
system name : J2E
system nr. : 01
started at : Fri Nov 30 10:38:29 2007
arguments :
 arg[00] : D:\usr\sap\J2E\JC01\exe\jlaunch.exe
 arg[01] : pf=D:\usr\sap\J2E\SYS\profile\J2E_JC01_ahassaine
 arg[02] : -DSAPINFO=J2E_01_sdm
 arg[03] : pf=D:\usr\sap\J2E\SYS\profile\J2E_JC01_ahassaine
JStartupReadInstanceProperties: read instance properties [D:\usr\sap\J2E\JC01\SDM\program\config\sdm_jstartup.properties]
-> ms host : ahassaine
-> ms port : 3900
-> OS libs : D:\usr\sap\J2E\JC01\exe
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : D:\usr\sap\J2E\JC01\SDM\program\config\sdm_jstartup.properties
Instance properties
-> ms host : ahassaine
-> ms port : 3900
-> os libs : D:\usr\sap\J2E\JC01\exe
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
Worker nodes
-> [00] sdm : D:\usr\sap\J2E\JC01\SDM\program\config\sdm_jstartup.properties
[Thr 3544] Fri Nov 30 10:38:29 2007
[Thr 3544] JLaunchRequestQueueInit: create named pipe for ipc
[Thr 3544] JLaunchRequestQueueInit: create pipe listener thread
[Thr 2240] JLaunchRequestFunc: Thread 2240 started as listener thread for np messages.
[Thr 3352] WaitSyncSemThread: Thread 3352 started as semaphore monitor thread.
[Thr 3544] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
[Thr 3544] CPIC (version=700.2005.12.02)
[Thr 3544] INFO: Invalid property value [Debbugable=yes]
[Thr 3544] [Node: SDM] java home is set by profile parameter
 Java Home: C:\Java\
[Thr 3544] JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\J2E\JC01\exe\jvmx.jar
JStartupIReadSection: read node properties [sdm]
-> node name : SDM
-> node type : sdm
-> node execute : yes
-> java path : C:\Java\
-> java parameters :
-> java vm version : 1.4.2_09-b05
-> java vm vendor : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : x86
-> heap size : 512M
-> root path : D:\usr\sap\J2E\JC01\SDM\program
-> class path : D:\usr\sap\J2E\JC01\SDM\program\bin\SDM.jar
-> OS libs path : D:\usr\sap\J2E\JC01\exe
-> main class : SDMInternal
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : D:\usr\sap\J2E\JC01\exe\jstartup.jar;D:\usr\sap\J2E\JC01\exe\jvmx.jar
-> shutdown class : com.sap.sdm.jstartup.shutdown.InternalShutDown
-> parameters : server sdmhome=D:\usr\sap\J2E\JC01\SDM\program
-> debuggable : yes
-> debug mode : no
-> debug port : 50000
-> shutdown timeout : 120000
[Thr 3544] JLaunchISetDebugMode: set debug mode [no]
[Thr 2480] JLaunchIStartFunc: Thread 2480 started as Java VM thread.
JHVM_LoadJavaVM: VM Arguments of node [SDM]
-> stack : 262144 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: vfprintf
-> arg[ 3]: -Dsys.global.dir=D:\usr\sap\J2E\SYS\global
-> arg[ 4]: -Dapplication.home=D:\usr\sap\J2E\JC01\exe
-> arg[ 5]: -Djava.class.path=D:\usr\sap\J2E\JC01\exe\jstartup.jar;D:\usr\sap\J2E\JC01\exe\jvmx.jar;D:\usr\sap\J2E\JC01\SDM\program\bin\SDM.jar
-> arg[ 6]: -Djava.library.path=C:\Java
jre\bin\server;C:\Java
jre\bin;C:\Java
bin;D:\usr\sap\J2E\JC01\exe;d:\sapdb\programs\bin;d:\sapdb\programs\pgm;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\ATI Technologies\ATI Control Panel;D:\usr\sap\J2E\SYS\exe\uc\NTI386
-> arg[ 7]: -Dmemory.manager=512M
-> arg[ 8]: -Xmx512M
-> arg[ 9]: -DLoadBalanceRestricted=no
-> arg[ 10]: -Djstartup.mode=JCONTROL
-> arg[ 11]: -Djstartup.ownProcessId=1360
-> arg[ 12]: -Djstartup.ownHardwareId=G1610100576
-> arg[ 13]: -Djstartup.whoami=sdm
-> arg[ 14]: -Djstartup.debuggable=yes
-> arg[ 15]: -DSAPINFO=J2E_01_sdm
-> arg[ 16]: -DSAPSTARTUP=1
-> arg[ 17]: -DSAPSYSTEM=01
-> arg[ 18]: -DSAPSYSTEMNAME=J2E
-> arg[ 19]: -DSAPMYNAME=ahassaine_J2E_01
-> arg[ 20]: -DSAPDBHOST=ahassaine
-> arg[ 21]: -Dj2ee.dbhost=ahassaine
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude iaik/security/md/SHA a
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
[Thr 2480] JHVM_LoadJavaVM: Java VM created OK.
JHVM_BuildArgumentList: main method arguments of node [SDM]
-> arg[ 0]: server
-> arg[ 1]: sdmhome=D:\usr\sap\J2E\JC01\SDM\program
[Thr 2240] Fri Nov 30 10:38:33 2007
[Thr 2240] JLaunchRequestFunc: receive command:17, argument:0 from pid:2600
[Thr 2240] JLaunchIShutdownInvoke: set shutdown interval (stop:1196419113/end:1196419233/TO:120)
[Thr 2240] JLaunchProcessCommand: Invoke VM Shutdown
[Thr 2240] JHVM_FrameworkShutdownDirect: invoke direct shutdown
[Thr 2240] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
[Thr 2240] JLaunchISetState: change state from [Initial (0)] to [Stopping (5)]
[Thr 640] Fri Nov 30 10:38:34 2007
[Thr 640] JLaunchIExitJava: exit hook is called (rc = 0)
[Thr 640] JLaunchCloseProgram: good bye (exitcode = 0)
Thank you very much in advance for your help.
Hassan

Hi!
If instance.properties is not there your installation has not finished correctly. This file is the central point of information for the bootstrap, which retrieves the info on how to connect to the database to collect the infos for the system startup (which will then overwrite your instance.properties file with the most recent values from the DB).
Please check if instance.properties has been deleted and can maybe be restored from tape or if there was an error in the installation.
Regards,
Jörg

Mercury Playback Engine does not work in new PP 2014 release?

Similar Messages

Maybe you are looking for