Mercury Transmit and mouse cursor

Hi Folks
Trying to get Speedgrade set up correctly with my Aja Kona card and Mercury Transmit. Since I lose my desktop video window with MT, I can't adjust masks with the widget anymore since the controls appear on my Mercury Transmit output screen. I've tried using SHIFT-X to move the cursor to the MT screen but it just sits there in the middle of the screen and I can't control it. Am I missing something or is there probably something flaky with my setup?

Hi,
it's working for me, but this is really slow so I'm not really able to work with it (I'm thinking to buy a Tangent control panel for this).
I have the latest update of Speedgrade CC 7.2 + Quadro 4000 + AJA Kona 3G.
By the way, someone could tell me why the cursor is so slow on my output monitor (it takes around 1 second to answer the mouse motion) ?
Many Thanks

Similar Messages

Matrox Mercury Transmit and Widget

Am I right to assume that controling masks and pan and scan "widgets" is not possible when the Mecury Transmit is turned on and spitting out to a reference monitor through an MXO2 on a Mac? I don't have the ability to move a mouse cursor to the monitor that the MXO2 is outputting to and the preview window in the app shows me "Dual Screen or SDI Output activated." Turning it on and off is kind of a pain, but I haven't been able to find a way to get it to work otherwise.
Thanks,
Brad

Dennis,
This works (I'm working through an AJA card) but I'm wondering if there are any keyboard shortcutds to temporarily disable Mercury Transmit so you can work with the widget in the main panel and then swtich back to the Transmit output easily? While I can use SHIFT-X to get my cursor onto my production monitor to manipulate the widget, the movements are extremely sluggish and impercise. Nothing like working with the widget on the main computer monitor. I'd like to bounce back and forth without having to disable Mercury Transmit in the prefs every time. Any tricks?
Thanks!

Safari and mouse cursor

I cannot use my cursor on my comcast home page. they think I need to update my browser. Do I need to add memory to get one since my computer is older? I have updated everything I can so far.

Press the key combination command-F5 to deactivate VoiceOver. If that doesn't work, proceed as follows.
For OS X 10.7: From the menu bar, select
 ▹ System Preferences ▹ Universal Access ▹ Seeing ▹ VoiceOver: Off
For OS X 10.8 or later: Select
 ▹ System Preferences ▹ Accessibility ▹ VoiceOver ▹ Enable VoiceOver: Off

System hangs, but mouse cursor is moving and music keeps on playing

Hi,
I'm experiencing very odd behaviour with my MacBook.
System hangs suddenly. I can't switch to any programs, but music keeps on playing and mouse cursor moving. It stays like this forever unless I force laptop to shutdown (by pressing the power button over 5 secs).
Few things that I've noticed when system crashed:
- I had a lot of programs running (Photoshop, Firefox, lots of small apps)
- I used Expose or alt-tab
- iTunes is playing music
Can anyone recommend some tests or tricks that I could run before sending it to the Apple service?

You might be right about having less apps to consume RAM. I've upgraded my RAM to 2GB because I knew this would be on issue.
Maybe I just have to start looking for better performance. Something that can house more RAM. 2xQuad Core Mac Pro for example
Poikkeus wrote:
- When this problem occurs again, go to the Apple Menu and activate Force Quit. Then, quit applications that may be hanging.
I tried to point out that mouse cursor is moving but system doesn't respond to any clicks.
I'll try the Main Menu and keep eye on RAM consumption. I'll post to this thread if it hangs again.

Keyboard shortcut for mercury transmit?

I have created a very handy keyboard shortcut in Premiere Pro to toggle Mercury Transmit and I would like to so the same in Prelude. But when I open keyboard shortcuts and search for transmit, it is not there. Is it called something else or is this even possible in Prelude?
Greg

Yep, that's pretty much what I was on about. You can do faux bold and italic in apps. like Word and I seem to remember that Quark used to do it too. But to my way of thinking it's bad Latin to use faux-anything. It's better to use a different font (or even create one) than to try and force a font to do what it wasn´t designed to do. I bear great respect for good type designers and get a bit puritanical when I see good fonts being misused.
Photoshop gives you different kinds of anti-aliasing which can sometimes get you part of the way you want to go.

On startup Mac Pro I get a blue screen and a cursor on the upper left. The mouse cursor shows up independently. Is it likely a video card failure?

On startup Mac Pro I get a blue screen and a cursor on the upper left. The mouse cursor shows up independently. Is it likely a video card failure?

I managed to boot the computer and get the desktop to show. I now have a "repaired" computer. There are several problems that have cropped up. One is that I can only start up now in Safe Boot mode. Is there a way to turn it off? Also, I do not have a sound list, so I can't access anything requiring audio. Google Chrome only shows up as a white screen. Pictures that loaded before don't load in browsers, etc. Any suggestions? I figure I should reinstall Mac OS Lion for starts, maybe even do a mirror backup and reformat the drive. I think this drive has turned into scrambled eggs...what a headache!

When I'm filling in the form on a website Firefox jumps down past the next block and I have to go back using my mouse cursor

For example on Find-A-Grave when filling in the form to add a memorial there are several blocks that you fill in including location. For some blocks you type in the information and others are pick one of the preset selections. I generally hit the tab key on my keyboard and goes to the next block except when it comes to the preset selection blocks. If I use the tab key to go to the next selection it skips right past the next selection to the selection below that. For example, after I fill in the year I hit the tab key and type u for the United States under the country selection. But in order to get the next block to appear I have to hit tab again (but only when using your browser). Your browser then skips past the state selection to the county selection. Then when I pick the state using the cursor it does it again and drops down to the Bio past the county selection.
When I use Internet Explorer I don't have this problem. I merely hit the tab button on my keyboard and it goes to the next selection rather than as your browser does that is skips to the block below.
Is there some reason you have it set up this way because it is quite annoying to have to go back up each time using the mouse cursor rather than continuing to use the keyboard to fill in everything (typing, tab key or using the arrow keys). To say the least it slows the whole process down a lot. No, it is not my computer. I've had the exact same problem using another computer. No, it is not the find-a-grave website. I just used it as an example. Using your browser forces me to stop using the keyboard to fill in a form and use the mouse and then the keyboard and then the mouse and then the keyboard and then the mouse, etc when it shouldn't be necessary when filling out a form on a website.

Are you having the problem with just the one site? Others?
Please post some public linkss.
Start '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Firefox in Safe Mode]''' {web Link} by holding down the '''<Shift><br> ''(Mac Options)'' ''' key, and then starting Firefox. Is the problem still there?

[Solved] Login freezing with busy mouse cursor and black screen.

After installing some recent updates I have suddenly found a problem when starting the login manager for Cinnamon.
After booting I am greeted with a black screen and a "busy" mouse cursor - like a stopwatch. I can't ctrl-alt-backspace to restart X.
What fixes it is - if I ctrl-alt-F2 to a new console and kill -9 the Xorg process. This causes X to restart normally. I have to do this every time now
I don't know if this is systemd related or what, but it only seemed to happen after the updates below.
[2012-11-23 21:32] Running 'pacman -Sy'
[2012-11-23 21:32] synchronizing package lists
[2012-11-23 21:33] Running 'pacman -S -u'
[2012-11-23 21:33] starting full system upgrade
[2012-11-23 21:35] upgraded accountsservice (0.6.25-1 -> 0.6.29-1)
[2012-11-23 21:35] upgraded calibre (0.9.6-2 -> 0.9.7-1)
[2012-11-23 21:35] upgraded cronie (1.4.8-3 -> 1.4.8-4)
[2012-11-23 21:35] upgraded dhcpcd (5.6.2-1 -> 5.6.3-2)
[2012-11-23 21:35] upgraded firefox (16.0.2-1 -> 17.0-1)
[2012-11-23 21:35] upgraded firefox-adblock-plus (2.1.2-1 -> 2.2.1-3)
[2012-11-23 21:35] upgraded firefox-i18n-en-gb (16.0.2-1 -> 17.0-1)
[2012-11-23 21:35] upgraded gnome-mplayer (1.0.7-1 -> 1.0.7-2)
[2012-11-23 21:35] upgraded gstreamer (1.0.2-1 -> 1.0.3-1)
[2012-11-23 21:35] upgraded gst-plugins-base-libs (1.0.2-1 -> 1.0.3-1)
[2012-11-23 21:35] upgraded gst-plugins-bad (1.0.2-1 -> 1.0.3-1)
[2012-11-23 21:35] upgraded gst-plugins-base (1.0.2-1 -> 1.0.3-1)
[2012-11-23 21:35] upgraded gst-plugins-good (1.0.2-1 -> 1.0.3-1)
[2012-11-23 21:36] upgraded harfbuzz (0.9.5-2 -> 0.9.6-1)
[2012-11-23 21:36] upgraded libsecret (0.11-1 -> 0.12-2)
[2012-11-23 21:36] >>> Updating module dependencies. Please wait ...
[2012-11-23 21:36] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2012-11-23 21:36] ==> Building image from preset: 'default'
[2012-11-23 21:36] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2012-11-23 21:36] ==> Starting build: 3.6.7-1-ARCH
[2012-11-23 21:36] -> Running build hook: [base]
[2012-11-23 21:36] -> Running build hook: [udev]
[2012-11-23 21:36] -> Running build hook: [pata]
[2012-11-23 21:36] -> Running build hook: [scsi]
[2012-11-23 21:36] -> Running build hook: [sata]
[2012-11-23 21:36] -> Running build hook: [autodetect]
[2012-11-23 21:36] -> Running build hook: [filesystems]
[2012-11-23 21:36] -> Running build hook: [usbinput]
[2012-11-23 21:36] ==> Generating module dependencies
[2012-11-23 21:36] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2012-11-23 21:36] ==> Image generation successful
[2012-11-23 21:36] ==> Building image from preset: 'fallback'
[2012-11-23 21:36] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2012-11-23 21:36] ==> Starting build: 3.6.7-1-ARCH
[2012-11-23 21:36] -> Running build hook: [base]
[2012-11-23 21:36] -> Running build hook: [udev]
[2012-11-23 21:36] -> Running build hook: [pata]
[2012-11-23 21:36] -> Running build hook: [scsi]
[2012-11-23 21:36] -> Running build hook: [sata]
[2012-11-23 21:36] -> Running build hook: [filesystems]
[2012-11-23 21:36] -> Running build hook: [usbinput]
[2012-11-23 21:36] ==> Generating module dependencies
[2012-11-23 21:36] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2012-11-23 21:36] ==> Image generation successful
[2012-11-23 21:36] upgraded linux (3.6.6-1 -> 3.6.7-1)
[2012-11-23 21:36] upgraded logrotate (3.8.2-1 -> 3.8.2-2)
[2012-11-23 21:36] upgraded ntfs-3g (2012.1.15-3 -> 2012.1.15-4)
[2012-11-23 21:36] upgraded ntfsprogs (2012.1.15-3 -> 2012.1.15-4)
[2012-11-23 21:36] installed gtkglext (1.2.0-9)
[2012-11-23 21:36] upgraded opencv (2.4.3-2 -> 2.4.3-3)
[2012-11-23 21:36] upgraded shadow (4.1.5.1-1 -> 4.1.5.1-2)
[2012-11-23 21:36] upgraded thunderbird (16.0.2-1 -> 17.0-1)
[2012-11-23 21:36] upgraded thunderbird-i18n-en-gb (16.0.2-1 -> 17.0-1)
[2012-11-23 21:36] Updating font cache... done.
[2012-11-23 21:36] upgraded ttf-liberation (2.00.1-1 -> 2.00.1-2)
[2012-11-23 21:36] upgraded vi (1:050325-2 -> 1:050325-3)
[2012-11-23 21:40] Running 'pacman -U /tmp/yaourt-tmp-john/PKGDEST.mEd/dirsyncpro-1.45-1-i686.pkg.tar.xz'
[2012-11-23 21:40] upgraded dirsyncpro (1.44-1 -> 1.45-1)
[2012-11-23 21:44] Running 'pacman -U /tmp/yaourt-tmp-john/PKGDEST.KyH/muffin-git-20121123-1-i686.pkg.tar.xz'
[2012-11-23 21:44] upgraded muffin-git (20120610-1 -> 20121123-1)
[2012-11-23 21:45] Running 'pacman -U /tmp/yaourt-tmp-john/PKGDEST.6mB/shutter-0.89.1-1-i686.pkg.tar.xz'
[2012-11-23 21:45] upgraded shutter (0.88.3-1 -> 0.89.1-1)
[2012-11-23 21:45] Running 'pacman -U /tmp/yaourt-tmp-john/PKGDEST.MTz/unix-runescape-client-3.9.4-1-any.pkg.tar.xz'
[2012-11-23 21:45] ==> for compatibility mode to work, you need to install 'wine' and any windows jre inside it.
[2012-11-23 21:45] upgraded unix-runescape-client (3.9.2-2 -> 3.9.4-1)
Any ideas?
Last edited by PTBM133A4X (2012-11-27 21:24:49)

PTBM133A4X wrote:
SIGTERM wrote:Try downgrading accountsservice to 0.6.25.
WOW! That did it
Could you explain what happened or why this fixed it please?
Thanks for your help.
I don't know the details to be honest, but the title of your post basically describes my situation with GDM when I used accountsservice >0.6.25, so I figured it was worth a shot, since the symptoms were the same.
Also, Cinnamon depends on accountsservice if I'm not mistaken, so it didn't seem unreasonable that the update broke Cinnamon too.
I'm glad it works now. Let's hope a updated, working version of accountsservice is released soon.

Windows Vista and Windows 7 Only Boots to a black screen with a mouse cursor

Windows Vista and Windows 7 Only Boots to a black screen with a mouse cursor after I installed Mcafee Internet Security.
Hi I installed 1of 3 McAfee Internet Security protections on my HP laptop a few weeks ago with no issues. I Have a Dell XPS 420 desk top with Windows Vista operating
system, it’s never had any issues, until 2 nights ago I installed McAfee Internet Security (detected incompatible files and will remove) pc now only boots up to a black screen with a mouse cursor, it will show the windows logo and a hash symbol floating around
the screen. Now 2 weeks ago I installed the same program on my Dell all in one desk top with Windows 7, the same issue happen but that pc has no screen activity, I tried a back to factory reboot on this one, still black screen.

Hi,
Please install the compatible version of McAfee Internet Security:
http://home.mcafee.com/store/internet-security
if you have startup issue, you can boot into Safe Mode to uninstall the problematic software to go back into Windows.
Alex Zhao
TechNet Community Support

Every keystroke and mouse movement, I get an audio notice that I need to shut off. In Safari, the cursor cycles thru every link and metadata field and I get a verbal/audio notice of what it is. How do I shut this option off???

Every keystroke and mouse movement, I get an audio notice that I need to shut off. In Safari, the cursor cycles thru every link and metadata field and I get a verbal/audio notice of what it is. How do I shut this option off???

Press the key combination command-F5 to deactivate VoiceOver. If that doesn't work, proceed as follows.
For OS X 10.7: From the menu bar, select
 ▹ System Preferences ▹ Universal Access ▹ Seeing ▹ VoiceOver: Off
For OS X 10.8 or later: Select
 ▹ System Preferences ▹ Accessibility ▹ VoiceOver ▹ Enable VoiceOver: Off

How to change mouse cursor during drag and drop

Hi Guys,
Iam performing a Drag and drop from Table1(on top of the figure) to Table2(down in the figure).
see attached figure
http://www.upload-images.net/imagen/e80060d9d3.jpg
Have implemented the Drag and drop functionality using "Transferable" and "TransferHandler"using the java tutorial
http://java.sun.com/docs/books/tutorial/uiswing/examples/dnd/index.html#ExtendedDndDemo
Now My problem is that ,I want to make the 1st column in Table2(ie: Column2-0) not to accept any drops so that the cursor appears like a "No-Drop" cursor but with selection on the column cell during a drop action.
Also when I move my cursor between "column2-0" and "column2-1",want to to have the "No-Drop" and "Drop" cursor to appear depending on the column.
How can I achieve it using the TransferHandle class.Dont want to go the AWT way of implementing all the source and target listeners on my own.
Have overridded the "CanImort" as follows:
public boolean canImport(JComponent c, DataFlavor[] flavors) {
     JTable table = (JTable)c;
Point p = table.getMousePosition();
/* if(p==null)
     return false;
int selColIndex = table.columnAtPoint(p);
if(selColIndex==0)
     return false;*/
If I execute the above commented code,The "No-Drop" Icon appears in "column2-0",but no cell selection.Also If I move to "column2-1",which is the 1st column,Still get the "No-Drop" Icon there,also with no cell selection.
for (int i = 0; i < flavors.length; i++) {
if ((DataFlavor.stringFlavor.equals(flavors))) {
return true;
return false;
Thanks in advance.....
Edited by: Kohinoor on Jan 18, 2008 3:47 PM

If you found the selection column based on the mouse pointer, then based on the column, you can set the cursor pointer as any one as below :
setCursor(new Cursor(Cursor.DEFAULT_CURSOR));
setCursor(new Cursor(Cursor.HAND_CURSOR));

I want to turn my macbook air off. the shut down button already appeared but the mouse/cursor just hang and won't work. even after pressing the enter button to shut my mac off won't work. what will i do?

i want to turn my macbook air off. the shut down button already appeared but the mouse/cursor just hang and won't work. even after pressing the enter button to shut my mac off won't work. what will i do?

This is not a reply. I just want to elaborate on this problem.
My computer freezes occasionally when it is used after being sleep for a while. The spinning ball appears and everything is totally disabled. Nothing on the keyboard works.
The mouse moves, but does not work.
The only solution is to turn the power off and on (losing all data in open applications.)
I kept the System monitor running on the side to find out which program was running when the computer froze. The Monitor as well as all other applications froze, but the data showed:
Firefox 18.4%
Activity Monitor 0.9%
Firefox Plugin 0.2%
This is all the information I have. By the way, I am using iMac with OS 10.6.

Has anybody had a problem with the mouse cursor lagging when navigating the drop down menus? this only started happening after a re-install. it only occurs in Photoshop elements 13 in the photo editing section,and no other application. My mouse drivers a

Has anybody had a problem with the mouse cursor lagging when navigating the drop down menus? this only started happening after a re-install. it only occurs in Photoshop elements 13 in the photo editing section,and no other application. My mouse drivers are up to date.Any help or advice would be most welcome.

Good day!
Please post Photoshop Elements related queries over at
http://forums.adobe.com/community/photoshop_elements
and please read this (in particular the section titled "Supply pertinent information for quicker answers"):
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
Regards,
Pfaffenbichler

My Mouse Cursor Disappears coming out of standby and screensaver!!

I have a TX1000z, with a fresh install of Windows Vista Home Premium 64. All drivers are current, including the video, networking, mouse, etc. I am using the xb3000 port replicator with the logitech MX Revolution mouse and a bluetooth wireless keyboard.
My mouse cursor disappears from the screen, sometimes both the laptop and the monitor (a Dell 22"), sometimes just one or the other. I can still use the buttons and see different things highlight, but no mouse cursor. It is not related to Windows Media Center as I have not run that on my laptop yet. I can reboot and everything is fine, but then it will just disappear again and I cannot keep rebooting! I have seen this problem posted all over the web, usually in relation to Windows Media Center and the "solution" is always the same...Disable Pointer Trails and "hide cursor while typing." Neither of these has worked for me. In fact, when I went in to disable trails, they were already disabled. Actually, when I clicked on Enable Pointer Trails, the mouse becomes visible. The mouse is then choppy (even when the trail is very short) and disappears again if I disable pointer trails.
Here is a link to another post with a very similar problem, but the resolution was not posted (though a suggestion was):
http://forums.logitech.com/logitech/board/message?board.id=software_mice&message.id=12940#M12940
HELP!!

Still an issue. No fix found for me either.
Windows Vista 64 sp3. Latest NVidia Video drivers. External Logitech Trackball Marble Wireless. Trails disabled, Hide while typing Disabled.
Happens when coming out of sleep, screensaver or hibernate. Usually on the primary screen only (dual display). Sometimes on all.

Mouse cursor jittery and broken after latest OS X update

I just updated my iMac (27", latest model, running Mountain Lion) with the most recent Software Update, and I'm now having big problems with my mouse.
The mouse cursor jitters wildly any time I move the mouse, jumping several centimetres back and forth (above-left and below-right; it doesn't seem to flicker randomly, just between those three positions. It flickers rapidly between the arrow cursor and the text selection cursor. When I stop moving the mouse, I will often get the wrong cursor (such as an arrow, or a text selection cursor on its side) instead of the correct text selection cursor. I've been stuck with the sideways text selection cursor for the entirety of this post, for instance.
This also happens in Photoshop when I'm working on images; the cursor will flicker between the arrow and whichever Photoshop tool I'm trying to use, and it will jitter wildly back and forwards. As you can imagine, this makes Photoshop unusable, which is a major problem for me.
It doesn't happen when I'm using stuff like the menus, or Control Panel, or the Safari bookmarks bar.
This happens whether I'm using a Magic Mouse via Bluetooth or a USB mouse, so it's not the mouse itself that's the problem.
I'm using the mouse on the same surface as I previously was with no problems (a wooden desktop with a matte finish), but the same thing happens when I try the mouse on other surfaces such as paper or a mousepad, so it's not the surface that's the problem.
Please help! This makes my Mac virtually unusable, at least for all the tasks I need to use it for. Any suggestions?

Hi EleanorJLH,
You may want to test to see if the issue persists in a new test user to help isolate the possible causes. You may find the following article helpful:
Apple Support: Isolating an issue by using another user account
http://support.apple.com/kb/TS4053
Regards,
- Brenden

Mercury Transmit and mouse cursor

Similar Messages

Maybe you are looking for