Merge .ac3 and  uncompressed

i need to merge an .ac3 audio file and a separate uncompressed picture into an uncompressed quicktime file

hello russ
that was fast.  thanks.  did exactly as you asked, and the results worked like a charm.  nice, elegant
but there's a critical problem:  it seems as if the .ac3 file was stereo encoded (mixed down) in the resultant QT output.  this is exactly what premiere cs 6 does.  i was wondering if the same is true of final cut x & compressor?  i need a QT playback device to recognize the embedded audio as an .ac3 (dolby digital), and not LtRt or stereo track.  any ideas?
here is the header info from the merged file exported through mpeg streamclip:
General
Complete name : /images/Crazy_ac3/crazy_comp_ac3/crazy_1920_1080_29.97fps_5.1_comp.mov
Format : QuickTime
Format/Info : Original Apple specifications
File size : 5.32 GiB
Duration : 1mn 0s
Overall bit rate : 760 Mbps
Encoded date : UTC 2013-01-26 00:36:31
Tagged date : UTC 2013-01-26 00:39:48
Writing library : Apple QuickTime
Video
ID : 1
Format : RLE
Format/Info : Run-length encoding
Codec ID : rle
Duration : 1mn 0s
Bit rate : 758 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 29.970 fps
Bits/(Pixel*Frame) : 12.197
Stream size : 5.31 GiB (100%)
Language : English
Encoded date : UTC 2013-01-26 00:36:31
Tagged date : UTC 2013-01-26 00:39:48
Audio
ID : 2
Format : PCM
Format settings, Endianness : Big
Format settings, Sign : Signed
Codec ID : twos
Duration : 1mn 0s
Bit rate mode : Constant
Bit rate : 1 536 Kbps
Channel(s) : 2 channels
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Stream size : 11.0 MiB (0%)
Language : English
Encoded date : UTC 2013-01-26 00:36:31
Tagged date : UTC 2013-01-26 00:39:48

Similar Messages

  • I have two iTunes accounts, one for music and another for audiobooks.  I want to merge them and maintain only one iTunes account.  How do I do it?

    I have two iTunes accounts, one for music and another for audiobooks.  I want to merge them and maintain only one iTunes account.  How do I do it?

    You cannot.

  • I have two Creative Cloud accounts, occurred by accident, I wish to merge them and have all my details and licenses under one account, how do I do that?

    I have two Creative Cloud accounts, occurred by accident, I wish to merge them and have all my details and licenses under one account, how do I do that?
    This is due to the different changes Adobe has gone through and unfortunately I used different emails at certain times.

    Under one Adobe ID you can have one CC only,if by accident you have purchased two CC under one account, it needs to be cancelled & refunded, please contact Adobe Support at
    http://adobe.ly/yxj0t6
    Regards
    Rajshree

  • Windows 8 mail app, has my icloud account on but none of my icloud contacts depsite merging outlook and icloud on the icloud control panel... Help?? :)

    windows 8 mail app, has my icloud email accounton it, but none of my icloud contacts depite the fact that i have merged outllok and icloud on the icloud control panel

    What you have experienced, though annoying, doesn't necessarily mean someone has hacked your account, though if you were finding that you were blocked because the sending limit had been reached that might indicate that you had been hacked.
    What can happen is that when people receive emails which appear to come from their own address but they haven't sent they naturally tend to be concerned: however it's most unlikely that anyone has hacked their account, they've just been targeted by one of two common spammers' techniques: both arise because it's all too easy to forge the 'from' address on messages to be something other than the real one.
    There are two methods. One is that the sender has forged the 'from' address to be the same as the 'to' address (so other people will see it coming from themselves, not you), presumably in the hope of confusing spam filters. It's harmless, if extremely annoying. Delete it (never ever answer spam or try to unsubscribe from it), and you don't need to be worried about it.
    The other problem is that a spammer is forging your address as the 'from' address on a whole batch of messages. The first thing you hear about this is when you start getting bounce messages because the spam has been sent to non-existent addresses and is being bounced to you. There's no point at all in responding to it. It's infuriating but normally stops after a bit as they move on to another forged address.
    There isn't really anything you can do about it: closing the account isn't really worth the hassle unless you are totally swamped, because you will have to tell everyone your new address. Apple can't really do any more than they already are about spam. However changing your password on general principles is a good idea.

  • I need to convert PDF to Excel, however, columns and tabs make many merged cells and many blank columns. In addition to not separate the columns correctly, I see many not separate lines together in the same cell. I'm even thinking that Adobe Acrobat Pro D

    I need to convert PDF to Excel, however, columns and tabs make many merged cells and many blank columns. In addition to not separate the columns correctly, I see many not separate lines together in the same cell. I'm even thinking that Adobe Acrobat Pro DC has limitations. There is no way to define what points in columns to force break column? Nor create many columns that are useless? How does text to column in Excel, fixed size when we import text, and define where the breaks have columns?
    Google Tradutor para empresas:Google Toolkit de tradução para appsTradutor de sitesGlobal Market Finder
    Desativar tradução instantâneaSobre o Google TradutorCelularComunidadePrivacidade e TermosAjudaEnviar feedback

    PDF does not contain columns, rows, formats, styles, or other aspects of word processing or spreadsheet file formats.
    This is because PDF is decidedly not a word processing or spreadsheet file format or something "like" one of those.
    (see ISO 32000 for what PDF "is")
    What can optimize the export of PDF page content is to start with a well-formed tagged PDF (ISO 14289-1, PDF/UA-1 compliant).
    Without that export is what it is and one performs whatever content cleanup is needed using the native application for the export file (MS Word or Excel).
    Be well...

  • Acrobat 9 - we are unable to merge word and excel files into a pdf.

    Acrobat 9 - we are unable to merge word and excel files into
    a pdf. Any advice?

    To be expected if you are working in a contemporary OS and contemporary MS Office suite.
    The Acrobat 9.x product family passed into End of Support mid-year of 2013.
    The product isn't compatible with contemporary OSs or Office suite.
    You may have to step up into the Acrobat XI product family.
    Be well...

  • RoboHelp 9 - problem with merged TOC and index

    Using RoboHelp v9.0.0.228 I have a master project which contains several merged TOCs and indexes for other CHMs. This has worked successfully for years, but has now stopped working in our translated CHMs. I have checked all the relevant settings and they appear to be correct. The English version still works correctly. Can you help please? Many thanks.

    OK, so my post was just a summary really!
    I have a main project with its own TOC, index and topics. I then have several other projects with their own TOCs, indexes and topics, and these are merged into the master TOC. In all these projects, we use the indexes to contain function ids for our software, so that when you press F1 in a software function, it invokes the correct Help topic in the CHM. The software is coded so that it goes to the main project first, and then looks in the merged index to find the link to the Help topic.
    In the individual sub projects, the TOCs and indexes are present and work correctly. Also, in the master project, the TOC and index works correctly in the original English version. However, even though the TOCs, indexes and topics are all present and correct in the translated versions (Russian, for example) the index in the master project does not contain the entries for the sub projects. The TOCs for the sub projects do, however, work correctly.

  • Merging XML and XDP files

    Hello!
    I must build this POC for a client and the idea is merge XML and XPD files to feed a LiveCycle Output process and create PDF files.
    I've built the XDP files and the XML to start things, now I need to figure out how to create the process to merge them in Workbench.
    Is there any tutorial to help me with this task?
    Thank you for any ideas!
    Marcos

    Thank you guys for helping a beginner in trouble.
    I hope I will soon be able to help others here and help the comnunity.
    Right now, I've so much to learn!
    Thank you!
    Marcos, Brazil

  • MacBook pro and uncompressed editing????

    I'm about to buy a 2nd edit system (currently running dual G5, AJA IO, with FCP 5 and, 3TB of SATA uncompressed storage) I need this next system to be mobile but still do uncompressed video. I see that you can use the AJA IO with the old MacBooks but you need a PCMCIA FW card with dual FW800 drives raided together to do 10bit uncompressed off of Digi Beta or Beta SP. Is there a pcmcia card slot on the new intel macbooks? Is anyone running this setup with success? I need to buy this thing ASAP and have it running soon. Any ideas?

    I wouldn't say you need a 2 drive RAID to handle Uncompressed 10bit standard def. You may have heard this about HD Uncompressed, but it is certainly not true with SD uncompressed. If you plan on uncompressed multistreaming (RT dissolves, RT overlays) then you will need such a system, but it is not necessary for single stream editing. Most FW800 devices can achieve a solid 50MB/sec. This is well over the ~25MB/sec that uncompressed 10bit requires for playback.
    If you need dual stream for RT effects, you could go with a FW800 RAIDed harddrive such as Lacie D2 big disk, which has 2 drives sharing a single FW800 bus and can easily achieve 60MB/sec sustained. This is borderline, but should be adequate in most situations. Remember not to attach any FW400 devices to the same bus as the FW800, or you will lose the advantages of FW800. Remember also that all Apple computers except xServe use the same bus for FW400 and FW800 ports, so you should get an ExpressCard if you plan on using FW800 and other devices at the same time.
    I believe there are some SATA ExpressCard solutions out there now, and I would strongly recommend these over FireWire800. A single Western Digital Caviar RE2 drive will achieve 65MB/sec sustained speeds on a SATA bus. FW800 devices are a bit slower than native SATA since the data needs to be adjusted through a bridge chip.
    Another workflow solution is to work in offline resolution with the macbook. PhotoJPEG at Medium Quality setting is great for the MacBook's internal hard drive and can be used in 720x486 unlike the DV CODEC's that are 720x480. For this reason PhotoJPEG can be swapped with Uncompressed footage easily without the odd issues that other offline formats can cause. Kona likes PhotoJPEG as well.
    You might also wish to upgrade your MacBook Pro Hard drive to 160MB 7200. It should achieve speeds in the 50MB/sec range, which is nearly 2x the speed of the standard 4500RPM drive. That might be enough for 2x stream editing, but it would likely drop frames occasionally when dual streaming. Just be sure to render your sequences before outputing to tape to avoid dual streaming.
    One last thing: if you're capturing footage from BetaSP, I seriously doubt you'd see a difference between the great DVCPro50 CODEC and uncompressed 10bit. The tape format doesn't really have enough latitude give you more detail than 8bits in my opinion. Digibeta is better in 10bit, but only with extremely clean footage such as film transfer. Most CCD noise or film grain create enough randomness in source footage that banding usually isn't an issue.

  • In iphoto '09, Ihave 2 or 3 copies of the same picture.  Is there a way to merge them and delete the extra pictures?

    In iphoto '09, Ihave 2 or 3 copies of the same picture.  Is there a way to merge them and delete the extra pictures?

    For dealing with duplicates in iPhoto check out Duplicate Annihilator

  • How to merge theme and slideshow

    Hello Guys
    I need your help on how I can merge theme and slideshow. I am trying to save the slideshow to an external hard-drive where i store my movies without having to burn it. The options I have are:SAVING AS DISC IMAGE and SAVING AS VIDEO TS_FOLDER.
    If i save my project using either of the two, it saves them as a FOLDER and when you open the folder, there are 2 other folders which are AUDIO _TS and VIDEO_TS. This is where the slide gets SPLIT- result is you have the theme separated from the slide show. This then means that I have to play the theme first and then go on to select the slideshow.
    I just want it to be as simple as just clicking on the slideshow and then it plays the theme and gives me the option to start the slideshow just as it happens to a burned DVD.It will automatically play the theme first.
    Please help!

    Thanks for responding
    I am using an External hard drive which can be connected to a TV. Its one of those you can save all your videos and music ect...Yes the Audio_TS folder is empty.
    Just a bit more info for you-: If I burn a slideshow project with a theme, I can automatically see the theme and the title ect.. and can also click play to start the slideshow.
    But when saved as a DISK IMAGE or VIDEO_TS, It will ONLY start playing the slideshow without showing THEME,TITLE ect..

  • How to un-merge contacts and apps?

    We have a new iphone 4 in the house. Previously with 4 of them, no problem. Now 3 of them are merging contact and apps. How do I un-merge the phones? I really don't need to see my daughters friends numbers, and any apps she adds appear on my phone.

    how can i separate the film so i can edit it.…
    You can't.
    But is the Project not anymore in your iMovie Library?

  • Merging labview and mathscript array question tia sal2

    Greetings,
    I really like mathscript functionality it’s just taking a
    while to learn how to merge labview and mathscript together.  I can get an XY graph out which plots the
    correct wave function (thanks to the forums help) the problem is going from 1-D
    Array of cluster 2 elements to 1-D of waveform Double so I can get a sound representation
    of the waveform. 
    Anyone have any suggestions.
    Tia sal2
    Attachments:
    mathscript formula to sound with waveform graph.vi ‏248 KB

    Sorry not sure what happened internet gremlins maybe...here's the vi and graphic image
    Second try Hopefully this will work
    Attachments:
    mathscript formula waveform graph.vi ‏1 KB
    image_of_mathscript_to_labview.jpg ‏108 KB

  • Merge xdp and xml to xfa form variable

    Hi, I am new with Adobe Livecycle and xdp/xfa form management.
    In my process I have a xml containing string data, I have also a xdp file. My goal is to merge them and stock into a xfa form so that it can be showed to an user GUI.
    I know that RenderPDFForm service can merge xml and xdp into a pdf file. Is there a way to merge them into a xfa form file?
    Thank you.
    Damien.

    It looks like I am back to square one.
    DDX is part of the Life Cycle tool set.  As Far As I know, I am not working with Life Cycle here.
    cfpdfform
    Description
    Manipulates existing forms created in Adobe® Acrobat® and Adobe® LiveCycle® Designer
    I created my sample form with Adobe Acrobat 9 Pro Version 9.4.4.  Does that mean I have an Acrobat or a LiveCycle form?
    ColdFusion supports two types of interactive forms: forms created in
    Adobe Acrobat 6.0 or earlier, and forms created in Adobe LiveCycle. In
    Adobe Acrobat Professional and Standard 7.0, Adobe introduced Adobe®
    LiveCycle® Designer for creating PDF forms.
    And if I do have a LiveCycle form, what or how do I get a DDX version of it?

  • Compress and uncompress data size

    Hi,
    I have checked total used size from dba_segments, but I need to check compress and uncompress data size separately.
    DB is 10.2.0.4.

    I have checked total used size from dba_segments, but I need to check compress and uncompress data size separately.
    DB is 10.2.0.4.
    Unless you have actually performed any BULK inserts of data then NONE of your data is compressed.
    You haven't posted ANYTHING that suggests that ANY of your data might be compressed. For 10G compression will only be performed on NEW data and ONLY when that data is inserted using BULK INSERTS. See this white paper:
    http://www.oracle.com/technetwork/database/options/partitioning/twp-data-compression-10gr2-0505-128172.pdf
    However, data, which is modified without using bulk insertion or bulk loading techniques will not be compressed
    1. Who compressed the data?
    2. How was it compressed?
    3. Have you actually performed any BULK INSERTS of data?
    SB already gave you the answer - if data is currently 'uncompressed' it will NOT have a 'compressed size'. And if data is currently 'compressed' it will NOT have an 'uncompressed size'.
    Now our management wants that how much compressed data size is and how much uncompressed data size is?
    1. Did that 'management' approve the use of compression?
    2. Did 'management' review the tests that were performed BEFORE compression was done? Those tests would have reported the expected compression and any expected DML performance changes that compression might cause.
    The time for testing the possible benefits of compression are BEFORE you actually implement it. Shame on management if they did not do that testing already.

Maybe you are looking for