Merge business workplaces of 2 users

Hi all!
I would like to merge two business workplaces.
For those who care, some users are using two different logins, which is against the security rules of the company.
Unfortunately, some of those users are using the business workplace of there two logins.
I have managed to merge many things from the two logins into a unique one, but i am not able to give these users the content of theire business workplace (i.e. Inbox, Outbox and Personal Folder) of the two accounts into a single one.
Any clue about how to handle this?
Thanks a lot!
Yann
Edited by: Yann Portrait on Dec 8, 2010 2:58 PM

Hi Yann,
You can define a substitution.
Regards,
Ronit.

Similar Messages

How to send a message to a users Business Workplace? (which FM)

Hi guys!
How can i send a message to a users Business Workplace inbox?
Can you help me out with a FM or where i find information to this topic.
thanks!

See https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/sendingEmailsandSAPMail
In the receiverlist you can set the type of user (external mail, internal mail by SAP userid is B i believe)
regards,
Hans

Business Workplace mail

I have a Workflow that sends a mail to an employee in some cases. The employee can see it at SAP Business Workplace, but he has to check it periodically to know if there are or aren't a new message for him.
Are there any way to tell him he has a message with a pop up a message or something like this?
I know on TX SO16 there is the parameter "No notification of unviewed mails at logon" wich is usefull, but only for logon. If the user is on the system and doesn't logout for whole day he will not know he has a new message until tomorrow, unless he check it explicitly.
Thanks!

Hi,
Have you thought about the option to send a mail to the outlook of the user? As Glauco mentioned you can either send the mail to the outlook user by sending the mail through the send mail step of the workflow or make use of the report RSWUWFML2 to send the workitem itself to outlook and he can execute it from there.
Hope this helps,
Sudhi

No Reply Function in ESS Business Workplace for SAP Mail

Hi ESS Experts,
We sent a short message using ESS Business Workplace. The receiver of the message was able to read the message but is not able to reply to it. We need to make sure this is not just a settings issue since replying to short message is allowed in R/3 Business Workplace. Is this expected behavior? Is there a way to enable a reply for ESS Business Workplace?
Thanks in advance for your help.
-Vlad

hi vlad,
please check the following user role is there are not SAP_BC_SRV_GBT_USER. and also further doucumentation please refer this [link|http://help.sap.com/saphelp_47x200/helpdata/en/1e/31a40415b711d4a39200a0c943858e/content.htm]
letme know how much i understood u rproblem
ravindra

Send spool to SAP Business workplace by a job

Hi All,
I have scheduled one job in sap for a report. I have to send the spool created to a SAP Business workplace's user.
I have made it by the botton 'Spool list recipient' in SM36. The job is running successfully and spool list is sending successfully too, the problem is that the user doesn't receive the complete list.
Nevertheless, if I access to spool order (SP01) and I try sending the list by menu: Spool request >Forward>Send using SAPoffice, the spool list is sending completly!!!!
Does anybody has any idea about this?
Thanks in advance

Hi.
I'll try it.
Thanks.

This is regarding CBMA in SAP PI 7.3.1. I have set up the alert mail using default java mail client.I do receive the alerts via mail. But my requirement is to direct all the mails to Business workplace inbox in ECC.

This is regarding CBMA in single stack SAP PI 7.3.1. I have set up the alert mail using default java mail client.I do receive the alerts via mail. But my requirement is to direct all the alert mails to Business workplace inbox in ECC.
So I need to set up PI to redirect mails to ECC Business workplace user inbox (sbwp). From here rules are set up & routed per distribution list.
Please guide me how I can achieve this requirement.

Hi,
yes, it is a little bit different. This is the issue.....
But I am not sure if your links will help:
1) /people/william.li/blog/2008/02/13/sap-pi-71-mapping-enhancements-series-using-graphical-variable
is about a different solution. I do not need to count the number of lines of the source message.
And the second variable is about concat line by line from unbound node to unbound node.
My issue is:
Souce:
Message line (0...unbound) ! ! ! ! ! ! ! !
.    ResultLine   (1..1)
Mapping:
=>   ResultLine1
       ResultLine2
       ResultLine........          => into UDF to an element (1..1) in one mapping operation.
So that all "ResultLine"s are included.
The result is explained in the given link for Mail attachment with UDF.
So I am not sure how to use this thread for my issue.
In the comments of that blog Christoph Gerber writes that the new variable feature can only handle single values.
So it is not suitable for my purposes as I have a list of values here that needs to be moved into the target message field.
2) http://wiki.sdn.sap.com/wiki/display/Java/UsingEditJavaSectioninMessageMapping
shows where to find the button "Java section" which is not available here in 7.1
3) /people/sap.user72/blog/2005/10/01/xi-new-features-in-sp14
too is about the nice little button for Java Section that is no longer existing on PI 7.1 screen for mappings.
So my issue is: How to replace the Java section function with global variables in PI 7.1?
Best regards
Dirk

Copy of notifications (mails) not received in business workplace

Hi,
The users stopped receiving a copy of the notifications in their business workplaces sent via mail step in a workflow.
The WF is using the SAP username to send the mails in the mail step of the workflow (we are not using the e-mail address, just the user name so the e-mail is obtained from SU01D).
Do you know if there is any custimization particular of the user or in general where you can set up if a copy of the e-mail can be received in the business workplace as unread document?
Thanks!

Sorry, I was a bit confused that you said "The users stopped receiving a copy of the notifications". So did they receive them before? Did they get both 1) email and 2) notification in business workplace?
At least I don't know a way to get notifications in business workplace if you have the above-mentioned "forwarding" setting on in SO16. I assume that if you turn it on, it simply forward everything to the email address and notifications are not coming to business workplace anymore. But if you said that it was working before, then I don't know how did you manage to get it working .
I would understand that you have to steps in workflow One sends notfication and one sends email. But if you somehow get this working with only one step and then get a "copy" into business workplace and email both, that is great. I would be interested to know about how to achieve this.
Regards,
Karri

Problem in Business Workplace

Hi Gurus,
We are having a problem in SAP Business workplace. One particular user is unable to attach any excel fiile while sending mail. The error is "close the file in the PC eff.nuovo attempt"
Regards,
Pradeep

Is the file closed while attaching it?... also can you check if theres any authorization issues?
Regards
Juan

Different task in UWL than Business Workplace

Hi,
I have problem with tasks.
Why in Business Workplace (R/3) I have only tasks "In Progress"? But in UWL in SAP Portal I have all of status tasks?
What must I do? I want the same tasks in UWL and in Business Workplace.
thanks,
Bogdan

Hi,
Here is something you can do to troubleshoot the problem:
Open NetWeaver Administrator of your host
Go to Operation Management > Processes and Tasks > Manage Processes
Look if you can see your process under 'Processes in Error State', this is selected by default in the process list. If you can see the process there, you can probably see what is wrong with it in the 'Details of Process Instance' table. Look also for hints in the History tab where you can select to show advanced log items.
If your process is not shown in 'Processes in Error State', then you should be able to find it if you select to show 'All Running Processes'. Again have a look at the advanced details in the 'History' tab. Look for entries related to creation of tasks there, this means that a task has actually been created. You can see the active tasks in this process by clicking the 'Show tasks' button.
If this shows you a task, go to the 'Owners' tab to see that your user is actually a potential owner of the task.
Hope that this helps,
Vladimir

Dynamic columns in Business Workplace

Hi All ,
We have an issue with Dynamic columns in Business Workplace ....We have changed the standard layout of the inbox with additional Dynamic Column with displays the Last Reserved By user of the Workitem...
Issue is that - the value is not refreshed in the Dynamic column whenever user chooses the Refresh button in the inbox..
Please let me know how to update the Dynamic column on choosing refresh in the inbox..
Thanks for your help in advance...
Thank you
Srinivas

Are you sure it is not refreshing, i.e. sure it is not a problem in your customer part of the solution? Try changing your attribute so the dynamic column displays the (current) time, retrieved as a virtual attribute on the business object. Then see if it is updated when you refresh.

Disabling or Removing Forward icon(option) from business workplace

Hai All,
My user is asking to remove or disable the forward icon from business workplace. Is there any config setting to do this. Please let me know how to solve this problem,
Thanks & Regards,
H.K.Hayath Basha.

Hi,
I don't know if the icon will disapear, but what you could try is that you change the autorisations for the user. Check object s_wf_wi and remove the activity 25.
As fas as i know, the user can't forward an item.
Also check object s_oc_role, make sure that the value isn't administrator.
I hope it helps,
Kind regards,
Maarten.

Using ITS services to send the link of business workplace

Hi All
In case we are using the webservice BWSP to send every user a hyperlink in a mail so that on clicking on it they will be able to view their business workplace.
Where should we do the setting for the logon credentials that is on clicking the link every user is asked for their user id's and password and then the business workplace opens up.Actually when I am testing this web service , always the business workplace of some other user is getting opened up instead of mine.
Also in case I need to pass a value specified in the URL as parameter to a module pool screen called via that URL , how can this be achieved.
Thanks in advance
Aman

Hi Aman,
Are you using the Integrated ITS or the ITS Standalone (6.20)? I think it is more common to use SBWP instead of BWSP (have you tried SBWP via WEBGUI?)
Best regards,
Cristiano

Hyperlink in OO-ALV to Sap-Business- Workplace-Dokuments

Hello specialists,
I have implemented hyperlinks to an oo-based ALV-List
( please see sample code later ). Now we have the problem that these hyperlinks only work in a local network-area.
But we have also foreign-departments on our SAP-system, that have no access to our network.
Now the question: is it also possible to create hyperlinks
assigned to SAP-Business-Workplace-documents ?
Do you have a solution for this problem ?
Thank' s in advance !
Best regards !
Oliver Perthen / Germany
*& Modulpool         ZBWS_TESTSZENARIEN_LINK                           *
INCLUDE Z_LINK_TOP                              .                      "
*&      Module STATUS_0100 OUTPUT
      text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'ZTEST'.
SET TITLEBAR 'ZX'.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
      text
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
    WHEN 'BACK'.
      LEAVE TO SCREEN 0.
    WHEN 'CANCEL' OR 'ABORT'.
      LEAVE PROGRAM.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Module create_object OUTPUT
      text
MODULE CREATE_OBJECT OUTPUT.
CHECK G_CUSTOM_CONTAINER IS INITIAL.
CREATE OBJECT G_CUSTOM_CONTAINER EXPORTING
CONTAINER_NAME = 'CONTAINER'.
CHECK ALV_GRID IS INITIAL.
CREATE OBJECT ALV_GRID EXPORTING
I_PARENT = G_CUSTOM_CONTAINER.
ENDMODULE.                 " create_object OUTPUT
*&      Module read_data OUTPUT
      text
MODULE READ_DATA OUTPUT.
SELECT * FROM ZBWS_TESTSZENARI INTO TABLE ZTEST WHERE TESTER EQ
'RW#9952'.
ENDMODULE.                 " read_data OUTPUT
*&      Module transfer_to_alv OUTPUT
      text
MODULE TRANSFER_TO_ALV OUTPUT.
REPORT = SY-REPID.
CLEAR LAYOUT.
CLEAR FIELDCAT_D.
REFRESH FIELDCAT_D.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
       EXPORTING
            I_STRUCTURE_NAME   = 'ZBWS_TESTSZENARI'
            I_BUFFER_ACTIVE    = 'X'
            I_BYPASSING_BUFFER = 'X'
       CHANGING
            CT_FIELDCAT        = FIELDCAT_D[].
FIELDCAT-FIELDNAME = 'HL_FNAME'.
FIELDCAT-NO_OUT = 'X'.
APPEND FIELDCAT TO FIELDCAT_D.
LOOP AT FIELDCAT_D INTO FIELDCAT.
    FIELDCAT-SELTEXT = FIELDCAT-FIELDNAME.
    FIELDCAT-REPTEXT = FIELDCAT-FIELDNAME.
    CASE FIELDCAT-FIELDNAME.
      WHEN 'TESTDATEI'.
        FIELDCAT-WEB_FIELD = 'HL_FNAME'.
    ENDCASE.
    MODIFY FIELDCAT_D FROM FIELDCAT.
ENDLOOP.
LOOP AT ZTEST.
    ZTEST-HL_FNAME = SY-TABIX.
    LS_HYPE-HANDLE = SY-TABIX.
    LS_HYPE-HREF = ZTEST-TESTDATEI.
    APPEND LS_HYPE TO GT_HYPETAB.
    MODIFY ZTEST.
ENDLOOP.
LAYOUT-NO_KEYFIX = 'X'. " Schlüssel nicht Fixieren
LAYOUT-INFO_FNAME = 'COLOR'."Farbstufen
LAYOUT-SEL_MODE = 'D'.   "Markierungsspalte
LAYOUT-SGL_CLK_HD = 'X'. "Sortierung per Click
LAYOUT-CWIDTH_OPT = 'X'.
CALL METHOD ALV_GRID->SET_TABLE_FOR_FIRST_DISPLAY
   EXPORTING
    I_STRUCTURE_NAME = 'ZBWS_TESTSZENARI'
    IS_LAYOUT = LAYOUT
    I_SAVE = 'A'
    IT_HYPERLINK = GT_HYPETAB
   CHANGING
IT_OUTTAB = ZTEST[]
IT_FIELDCATALOG = FIELDCAT_D.
ENDMODULE.                 " transfer_to_alv OUTPUT

Hi.
I'll try it.
Thanks.

Folders not available in SAP Business workplace(SBWP)

Hi,
When i click on any of the folder in SAP Business workplace,the folders are getting disappeared and i am getting the message "Folder inbox no longer available".
Please let me know if any one you have faced the same problem.
Regards,
Kumar

Hi,
I have already refferd this Note,but this doesn't solved my problem.
Please let me know if there is any workaround for this issue.

SAP BUSINESS WORKPLACE.

Talking about SAP BUSINESS WORKPLACE , someone knows if exists there options to change about rules of the kind of messages that arrives in the inbox. One message to the corresponding folder x and other message to other folder..
Other problem that i'm having is that: if click the worklow folder that contains subfolders i can't see all the documents in those folders but in qa i can.
The thing is that if i click in the tree the worklow folder that have subfolders i can't see all the documets.
Something know about that?.
thnks a lot.
REGARDS.
Fede-

Take a look at CALL FUNCTION ... STARTING NEW TASK in your help documentation. Or you can use this link:
http://help.sap.com/saphelp_nw04/helpdata/en/22/04259f488911d189490000e829fbbd/frameset.htm
You will use DESTINATION NONE.
Let us know how it goes.

Merge business workplaces of 2 users

Similar Messages

Maybe you are looking for