Merge Data to Spreadsheet Problem after Update

After updating Acrobat X to version 10.1.12 and 10.1.11 from 10.0.0 when merging Live-cycle form data to a spreadsheet Acrobat is including image data. Our company logos at the top of the form is exported to the spreadsheet causing a huge amount of data representing the image. This problem did not exist in version 10.0.0. Is there a way for me to back-up to 10.0.0? Is there a fix for this problem?

I noticed the same thing. "add a file" has behaved that way for a while. I suspect someone changed "add a folder" to do the same thing with the new version.
It is really annoying. I assume from the lack of postings about it no one knows how to fix it.
Oh well.

Similar Messages

  • White screen problem after updating to 1.1 firmware

    My 2G iPod Nano worked fine with 1.0.1 and 1.0.2 firmware but after updating to 1.1 I get white screen everytime I turn it on after longer period of time. Turning the iPod off and then right back on makes it work again. I have done restore 3 times without effect. I even removed the firmware files so that iTunes downloads them again when doing the restore but that didn't work either.
    Should I return it or wait for new firmware? Has anyone else had this problem after updating to 1.1?

    Disconnect iPod and close iTunes.
    Firmware files are in "Documents and Settings\username\Application Data\Apple Computer\iTunes\iPod Software Updates" folder.
    You should still have the 1.0.2 files named "iPod_19.1.0.2.ipsw" and "iPod_19.1.0.2.ipsw.signature" in there if have you upgraded from 1.0.1 version.
    Remove 1.1 files from the folder so that only those to files are in there.
    Disconnect from network (I switched off my wlan) so that iTunes can't download the new version. Connect your iPod and do Restore, iTunes will now use the old firmware files because it can't connect to the internet.
    Fujitsu Siemens Amilo M3438G   Windows XP  

  • Iphone 5 back camera problem after update to IOS 8. Focus doesn't work on back camera!

    My device is Iphone 5 64gb IOS 8.
    I have problem after update to IOS 8. When i run camera.. I hear some scratch inside my phone. And focus of back camera doesn't work.
    1. How can i fix it?
    2. Or how to rollback to IOS 7+ ?
    3. Should i come to app store with this problem?

    I'm having this same problem too.  Worked fine prior to iOS update.  I contacted Verizon this morning who advised that this is a known issue.  They suggested I backup my device, and perform a factory data reset.  When prompted to update to iOS 8 again, re-installation has been known to resolve the issue.  With all the problems with iOS 8, camera, and overall device slowing, I might just wait for a follow on SW turn.

  • Personal hotspot missing and music volume not working and lots of other problem after updated 4s to ios8 ? Apple disappointed this time badly.

    Personal hotspot missing and music volume not working and lots of other problem after updated 4s to ios8 ? Apple disappointed this time badly.

    GO to Setting > Cellar Data > VPN Settings > Add any user and password under Personal Hotspot, then you will see it's activated again as usual

  • Bluetooth problem after update to lollipop

    Hi,I've recently updated my 6503 to Lollipop.Everything went smoothly and is working fine, except 2 issues - one solved, second NOT. FIRST (solved) - phone after update waked up and logged to 2G network, with no data transmission (despite it was turned ON). What was strange - my operator's network appeared in 'available network list' as separate 3 NETWORKS ( 2g, 3g and LTE) Switching manually to LTE solved it - now phone is switching between technologies automatically, data transmission is working fine. SECOND AND NOT SOLVED: I'm using the hands-free system built in my car ( mitsubishi lancer, 2008 ) . After update, phone failed to establish connection with it, even hands-free system remained as 'associated device'. OK ... I erased hands-free system from phone, as well as phone from car's memory. Paired devices again - starting procedure from car's side. Nothing better. Erased and paired starting from phone side. Nothing better.What I've  observed more: phone after try to establish connection , phone in eye blink looses it. On list of available services of hands-free system (in phone menu ofc) , only 'phone sound' appears, while -as I remember but i'm not sure- before update more (2 or 3) services were detected .   PLEASE HEEELP !  

    Re: Bluetooth problem after update to lollipop As above post, I am also experiencing problems with bluetooth on my Z2:- Phone connection is OK if Bluetooth is turned on the phone for " car is ready". Then I can make and receive calls.
    - Playing music on bluetooth does not work after Lollipop 5.0.2 update on my car head unit. Previously connected and able to stream music on 4.4.4 Kit Kat with no issues, looking on web this is not a new issue with Bluetooth connection issues to devices since Lollipop came out so what the **bleep** is going on? I purposely bought a Sony TV, Car Head Unit and Soundbar to ensure everything worked together now the head unit that I only had fiitted in February does not connect which cost me £249!!! No issues connecting to TV or Soundbar but on HU it tries to connect then disconnects and BT Audio Icon on HU display greys out although phone is connected and icon highlighted as connected. I have cleared cache, unpaired and paired again, reinstalled 5.0.2 again through wifi instead of OTA but still the same. Car device: Sony XAV-602BTAndroid version 5.0.2Version: 23.1.A.0.726

  • My ipod touch 4G got problem after update to iOS 6, it can not access the Apps store ,can not access safari,map, weather and so on, could someone help me to solve the problem, thanks in advance~~~

    My ipod touch 4G got problem after update to iOS 6, it can not access the Apps store ,can not access safari,map, weather and so on, could someone help me to solve the problem, thanks in advance~~~

    Force close the App Store app and reset the iPad. No data will be lost when you reset the device.
    In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • HT201210 I have 4s facing hang problem after updating when i dicline the call the keypad geting locked ,touch stop working unable to unlock the phone .then what i can do i restart the phone with pressing home key & power key together then i am able to ace

    I have 4s with 16GB storage capacity using IOS 7.1.2.
    Facing hang problem after updating when i decline the call the keypad getting locked ,touch stop working unable to unlock the phone .
    Then what i can do i restart the phone with pressing home key & power key together then i am able to access it.
    Kindly resolve the issue as soon as possible
    Ashish
    [email protected]

    Did you already try to set it up as a new device, as explained in this article?
    iOS: How to back up your data and set up your device as a new device

  • My iPhone 5s on ios 8.1.2 is stuck at Apple logo or recovery mode.. To fix this issue, i need to update it to ios 8.2 through itunes.. I want to ask that my data i.e. Photos and other personal data would be removed after updating it or not..?

    My iPhone 5s on ios 8.1.2 is stuck at Apple logo or recovery mode.. To fix this issue, i need to update it to ios 8.2 through itunes.. I want to ask that my data i.e. Photos and other personal data would be removed after updating it or not..?
    if yes then how can i save my data or get out of recovery mode.. Is there any safe mode or something like that on which i could access my data..
    P.S. I have not taken any backup of my iPhone on itunes..
    Please help me sort out this issue..

    Recovery mode doesn't mean that all your data is already lost. You only lose your data if you restore it.
    When you plug the phone is into iTunes hold down the home button. iTunes may then give you the option JUST to update the software first. This should not get rid of any data.
    However, if iTunes is only giving you the option to RESTORE and update, then you will lose your data I'm afraid.
    Hope that helps!

  • Photoshop CS2 problems after updating to 10.4.5.?

    Anybody notice Photoshop CS problems after updating to 10.4.5.?

    Hello I had the same problem
    I found the following information that helped me.....
    Program errors occur when software conflicts arise due to an updated operating system. You can resolve these errors when you also update the driver software that causes the conflict or when you update the operating system. Program errors can also occur because of a damaged Photoshop preference file, or if there is a problem with a phone or internet connection. The Apple Disk Utility fixes file system errors that can also cause program errors.
    Error "Could not complete your request..." or "Could not create a new document..." (Photoshop CS2 on Mac OS X v10.4)
    Issue
    Adobe Photoshop CS2 returns one of the following error messages:
    "Could not complete your request because of a program error" when you try to open a file.
    "Could not create a new document because of a program error" when you try to create a new file.
    Solution 1:
    Install the most recent update to Mac OS.
    Solution 2:
    Re-create your preferences files.
    1. Hold CommandOptionShift when you start Photoshop.
    2. Click Yes to the message, "Delete the Adobe Photoshop Settings file?"
    Solution 3:
    Disconnect your Internet connection.
    To disconnect your Internet connection, do one of the following:
    If you are connected to the Internet via a telephone modem, then disconnect from the modem.
    If you are connected to the Internet via cable modem or DSL, then disconnect the ethernet cable from your computer.
    Solution 4:
    Use a disk repair utility.
    Restart your Mac in Single User mode and run fsck -fy . For more information about the fsck command, please visit the Apple website at http:/docs.info.apple.comarticle.html?artnum=106214 .
    Solution 5:
    Ensure that all your drivers are compatible with Mac OS X v10.4.
    Determine if your printer and video card (and any other peripherals you might have) are compatible with Mac OS X v10.4, and visit the manufacturers' websites to update the drivers.
    Solution 6:
    Re-create your printers in Mac OS X.
    To re-create your printers, first delete them and then add them again.
    To delete your printers:
    1. Open System Preferences from the Apple menu.
    2. Select Print & Fax, and click Printing.
    3. Select each printer in the list and click the delete key (the minus key).
    For instructions on how to add your printers again, see "Setting up to print to a printer" in Mac Help or search Help using the phrase "add a printer."
    The one that fixed it for me was solution 6 -- re-creating my printers
    I don't know why but it could be worth a try
    Good luck
    ADAM
    17" Powerbook G3 iMac   Mac OS X (10.4.3)  
    17" Powerbook G3 iMac   Mac OS X (10.4.3)  
    17" Powerbook + G3 iMac   Mac OS X (10.4.5)  

  • My itunes opens after 2-3 hrs after doubleclicking it to open;it happened once or twice  with itunes 11.x , but its a constant problem after updating itunes to 12.x ....my operating system win7;processor i5 intel haswell and 4gb ram...i hav no issue

    My itunes opens  2-3 hrs after doubleclicking it to open;it happened once or twice  with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
    1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
    but my problem doesnot get solved even after trying all the methods in the above pages...
    now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possible

    My itunes opens  2-3 hrs after doubleclicking it to open;it happened once or twice  with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
    1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
    but my problem doesnot get solved even after trying all the methods in the above pages...
    now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possible

  • What cause searching network problem after updating iphone 6 from iOS 8.1.2 TO iOS 8.1.3?

    what cause searching network problem after updating iphone 6 from iOS 8.1.2 TO iOS 8.1.3?

    SSince Apple does not support downgrading the iOS I suggest you start a new question that gives a good title to a specific problem. Then in the body of the thread describe the problem in detail, tell us what steps you have tried so far to correct the problem, what happened, and what error messages you received.

  • HT4623 I AM FACING PROBLEM AFTER UPDATING (7.0.4) MY PHONE MODEL 5C,AFTER THIS UPDATE SOME TIMES I CANT MAKE CALLS & SOME TIMES WHEN ANY BODY ELSE WANTS TO CALL ME BACK THE MESSAGE COME THAT THE USER IS NOT REACHABLE.PLS HELP

    I AM FACING PROBLEM AFTER UPDATING (7.0.4) MY PHONE MODEL 5C,AFTER THIS UPDATE SOME TIMES I CANT MAKE CALLS & SOME TIMES WHEN ANY BODY ELSE WANTS TO CALL ME BACK THE MESSAGE COME THAT THE USER IS NOT REACHABLE.PLS HELP

    I am facing the same issue! I bought 5c few days back
    and everything was fine till I updated the software 7.0.4!
    Whenever am connected to wifi am unable to make a call and if someone tries
    Calling me they get the message that my number is not
    Reachable! When I go back to 3G the calls work perfectly!!
    Please help me out since I use wifi more than my network.
    Appreciate any advise on this

  • Flash player problem after updating to belle on my...

    flash player problem after updating to belle on my nokia c7.when I try to play .flv videos screen goes blank as show in image,previously these videos runs fine on symbian anna plz help plz  help or tell me the way to downgrade to anna
    Attachments:
    scr000002.jpg ‏10 KB

    1) product code  059B7W0
    2) software version 111.030.0609
    3) it is actually stored .flv files on my phone  workes fine on symbian anna
    Attachments:
    Scr000003.jpg ‏17 KB
    Scr000004.jpg ‏15 KB

  • Anyone has any problem after updating to iSO 4.3.1 ?

    anyone has any problem after updating to iSO 4.3.1 ?
    I would like to know before updating mine.

    My 3G kept freezing after iSO 4.2.. and after reading the forums I updated both my Itunes and software to iOS 4.3.1, now I've lost my notes, contacts, calender entries and so far in the last ten minutes it's turned off and restarted itself and sync'd continually about 5 times.
    So basically I'm still where I was before only more cranky. In addition, I live in Australia and there are no Genius places here, there is no support from Apple unless you pay for it even by an email, you basically end up fending for yourself under a supposed warranty that isn't worth the paper its printed on.
    It you haven't already guessed, I'm more than a little ****** off.
    If I'd known how much trouble this was going to be, I don't think I would have spent the $400 odd dollars to buy it.
    If its not right by the weekend I'm taking it back to the shop I bought it.

  • Microsoft Office 2011 no longer opens because "there is a problem" after updating mountain lion when the app store said there was an update available this morning. Reinstalling did not work. What's the problem?

    Microsoft Office 2011 no longer opens because "there is a problem" after updating mountain lion when the app store said there was an update available this morning. Reinstalling did not work. What's the problem?

    Has your problem been solved by the updates??
    Have a similar problem. This MacBook opened all MS Office programs in Dec2012 but no longer does in Feb2013. Went to Microsoft/mac/downloads but none of the three updates would run citing a problem "version of software needed to run this update was not found on this volume".
    MacBook: 7.1, Intel Core 2 Duo, 2.4 GHz
    Microsoft Office 2011:  version 14.2.3
    Mountain Lion: 10.8.2 (12C60)

Maybe you are looking for