Merge Emails Only group with matching Names and Emails group

Here's the situation:
I have a large list of conacts that are only email addresses and are in a group called Emails Only. I decided to upload the email address to LinkedIn and connect with the people that were in my email list to obtain their full name if they were on LinkedIn. Then, after I connected with a bunch of people, I exported my whole LinkedIn contacts back into my address book in a group I made called LinkedIn.
I then tried to merge my contacts. For some reason the LinkedIn group won't merge with the Email Only group. Shouldn't my address book realize there are multiple contacts with the same email address? Is it an issue that the Email Only list just has emails and no names?
Any help would be much appreciated!

Similar Messages

No event method with matching name and signature found on EventSet

Dear,
I have this error in the Problems view in Workshop (I'm using the Weblogic 9.2.1) :
No event method with matching name and signature found on EventSet: com.bea.control.TaskControl.Callback.
This error occurs sometimes when I put an event on a task in a process definition. Example, I have a process : Application.java, when I put the onReceptionCompleted control (receive) in my process, the error appears!
Thanks for your help,
Regards,
Mathieu

It is a problem with the drap & drop in Workshop (from the taskControl to the Process). Workshop automatically inserts a wrong eventSet instead of the good one from the generated task control !
See you,
Mathieu

Merge Email Address Only Group With Matching Names And Emails Group

Here's the situation:
I have a large list of conacts that are only email addresses and are in a group called Emails Only. I decided to upload the email address to LinkedIn and connect with the people that were in my email list to obtain their full name if they were on LinkedIn. Then, after I connected with a bunch of people, I exported my whole LinkedIn contacts back into my address book in a group I made called LinkedIn.
I then tried to merge my contacts. For some reason the LinkedIn group won't merge with the Email Only group. Shouldn't my address book realize there are multiple contacts with the same email address? Is it an issue that the Email Only list just has emails and no names?
Any help would be much appreciated!

Hi Navgup,
Please refer to the script below, to query users in other domain by specifying the parameter "-Server" in the cmdlet "get-aduser", and also note I haven't tested the script below:
import-module activedirectory
get-adgroupmember "group"|foreach{
$email=(get-aduser $_.samaccountname -properties *).EmailAddress#get the user email
Get-ADUser -filter {EmailAddress -eq $email} -properties * -server DomainB.company.com|select samaccountname, memberof}#filter user name and group with the email in other domain
To get users across domain, please also refer this blog:
Adding/removing members from another forest or domain to groups in Active Directory:
http://blogs.msdn.com/b/adpowershell/archive/2010/01/20/adding-removing-members-from-another-forest-or-domain-to-groups-in-active-directory.aspx?Redirected=true
I hope this helps.

HT201493 When I add a person in io6 their email is only displayed not their name and picture from my contacts that the email is associated with, why?

When I add a person in io6 their email is only displayed not their name and picture from my contacts that the email is associated with, why?

The whole idea to an icloud account is that one user uses it and has all their devices synced together. Different users need different Apple IDs to create their own icloud accounts. Note that everyone can still use the same ID for an iTunes account (to share purchases).
To create a new icloud account, go to
http://www.apple.com/icloud/setup/

HT1296 I am facing a problem with my iPhone 4. I applied the first syncing with outlook 2007 by choosing the "merge" option. At the end of the process, some contacts are correctly sync, but most are only sync with the names. Numbers are lost. Any suggesti

I am facing a problem with my iPhone 4. I applied the first syncing with outlook 2007 by choosing the "merge" option. At the end of the process, some contacts are correctly sync, but most are only sync with the names. Numbers are lost. Any suggestion?

I would love to do this as well. All I need is my calendar appts from outlook. Right now I am using google calendar sync, but I would like to move to the cloud and away from google. I find it hard to believe there isn't an option to do this.

Question: When I want to send SMS and click on the contact, the contact came out with names and numbers, as if the whole contacts are there in the phone. When I open the contact, I can only see 3 contact names and the rest of 4000 contacts are not listed

Question: When I want to send SMS and click on the contact, the contact came out with names and numbers, as if the whole contacts are there in the phone. However, when I open the contact, I can only see 3 contact names and the rest of 4000 plus contacts are not listed, and it makes you difficult to call through contact

The iPhone remembers information about previous contacts.
Complelely independently, you have a Contacts app with a contacts list. It sounds like your contacts list has 3 names on it. You need to add a few names.

Srvrmgr syntax: how can I create Named Subsystem with both Name and Description values?

In looking through bookshelf, there is no syntax discussed that allows you to include both the Name value and the Description value for a Named Subsystem/Profile Configuration. In the screenshot, the circled values were created with the server manager command-line.
In contrast, you can create a component definition with a Name (full name) and Description.
For CompDef, this works:
create component definition CompDefTest1_enu for component type AppObjMgr component group Fins run mode Interactive full name "Test Comp Def Test 1" description "Test 1 Object Manager CompDef"
For Named Subsytem, this does NOT work:
create named subsystem Test5 for subsystem EAITransportDataHandlingSubsys full name "Test 5" description 'Test 5 Description'
Can anyone tell me if, for a Named Subsytem, there is a proper syntax to include both the Name and Description values in the command-line, or is the only way to manually create it in the UI?

Hi,
I have reviewed the help for create command in srvrmgr, it does not give the full name and description as parameters for subsystem creation. However, as you indicated these parameters are available for component definition creation:
srvrmgr> help create
create { component group | compgrp } <component group name>
       [ full name <descriptive name> ]
       [ { description | desc } <description of component group> ]
create { component definition | compdef } <component definition name>
       for { component type | comptype } <component type name>
           { component group | compgrp } <component group name>
       run mode { batch | interactive | background }
       [ full name <descriptive name> ]
       [ { description | desc } <description of component definition> ]
       [ with [param <param_name>=<value>[, <param_name>=<value>...]]
              [fixparam <fixed_param_name>=<fixed_value>[,...]]]
create named subsystem <named_subsystem_name> for
       subsystem <subsystem_name> with <param_name>=<param_value> [, ..]
Bookshelf also has an example of subsystem creation that does not include full name and description:
http://docs.oracle.com/cd/E14004_01/books/StoreFwdMsg/StoreFwdMsg_InstallConfig14.html#wp1351472
In this case I suggest you to create a ticket on My Oracle Support to confirm that srvrmgr does not support creating a new subsystem with full name and description parameters, and request an enhancement request for these parameters to be included in create statement for new subsystems when using srvrmgr.
Hope it helps,
WSiebel

Error when opening XLSX file with Excel 2003 SP3, file does open but in read only mode with temporary name

I am using Excel 2003 SP3 and have the Office 2007 compatibility pack installed. When I open Office 2007 formatted Excel files (XSLX) directly in Windows Explorer, I receive the following error if I do not have Excel already opened:
"Windows cannot find '<path to file>'. Make sure you typed the name correctly, and then try again. To search for a file, click the Start button, and then click Search."
Even though I receive the error, the file does open; however, it opens in Read Only mode with a name such as "Xl0000024.xls". The number seems to increment up each time it happens.
Now here is the strange part. If I have Excel already open and try to open the file in Windows Explorer, the file opens fine in Modify mode with no error and with the correct file name.
I Googled the error I was getting and found KB211494. It says I should uncheck the box in Options on the General tab that says "Ignore other applications", but this box is already unchecked in my case. Any other ideas? This is
really frustrating as a small percentage of our company has upgraded to Office 2007 with the rest still on Office 2003.

This may be a file association problem. To solve that:
In Windows 7:
1. Right-click the file,
2. Select "Open With"
select [Your Program Here]
3. Check always use this program.
In Windows XP:
1. Locate the file as you have described above
2. Right click the file
3. Select Open with from the pop-up menu
4. Click Choose default program…
5. Select Excel in the Recommended Programs box
6. Check Always use the selected program to open this kind of file
7. Click on OK.
1. Make Excel not available from Office 2007 listed under Programs and Features in Control Panel.
2. Take a registry backup using the steps given here
3. In the registry editor window expand HKEY_CLASSES_ROOT and navigate to .xls right and delete it.
4. Exit Registry Editor
5. Undo Step 1 to make Excel available.
6. Restart the computer and verify it the issue is fixed.
If this answer solves your problem, please check Mark as Answered. If this answer helps, please click the Vote as Helpful button. Cheers, Shane Devenshire

Why does a pdf document created in Adobe XI give my used an error message that should only occur with Adobe 8 and 9?

why would my customer reading my pdf file get this message: 'Licensing for this product has stopped'?
The message goes on to say, 'you cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT administrator or Adobe customer support for help.'
As recommended, I downloaded the 'License Recovery' program only to find that the program only works with Adobe 8 and 9.

Hi sivey@pdx,
Can you please let us know the following:
- Operating System installed;
- Name and version of the Adobe Product (Adobe Reader or Adobe Acrobat);
- Screenshot of the error message.

How to auto populate numerous pdf files with same name and address?

I have numerous pdf files where a company's name and address will need to be entered onto each file. Would there be a way to enter this information once, say on an excel file or something, and then have this information auto populate all the correct fields in each and every pdf file I have to fill out. I am a complete rookie with Adobe Acrobat. At any one's convenience please let me know or point me in a direction where I can possibly learn this for myself. If Adobe offers this type of service please let me know which department to contact.
Thanks,
John

If you were an InDesign user, you could layout the document there, and use the Data Merge feature to bring in the names and addresses from Excel. Then create a PDF of the resulting file which could be split into individual PDFs.
There might be a way to do it similarly with Microsoft Word and Mail Merge.

How can I close a fake account with my name and my picture?

I just noticed that there is a fake account with my name and my picture!!! How can I report or even close it?
I have no idea who made this or how used it
Please help me
I sent an email to [e-mail removed for privacy and security] but seems it's no longer valid!
Please if you know a way that can help me, share it with me.

You should be able to connect to their computer via your USB cable, copy the video over using Windows Explorer and the PC should be able to view it without any conversion.
When you do this, make sure they don't have iTunes set to automatically open and automatically sync when an iOS device is connected.

I accidentally deleted Garageband on my MacBook Pro, version 10.6.8. The new version of Garageband is only compatible with 10.9 and above. Is it possible to still get the older version? OR, can I get another copy of the startup CD for my computer

I accidentally deleted GarageBand on my MacBook Pro, version 10.6.8. The new version of GarageBand is only compatible with 10.9 and above. Is it possible to still get the older version? OR, can I get another copy of the startup CD that came with my computer so that I can reinstall GarageBand?

The new version of GarageBand is only compatible with 10.9 and above.
If your Mac can run MacOS X 10.6.8, it probably can be upgraded to Yosemite, if you don't have to stick to Snowleopard for other reasons.
Is it possible to still get the older version?
Amazon or eBay are still selling iLife '11 installer disks, and you could reinstall GarageBand from these DVDs. But it will be expensive.
Have you checked your backups, if you can restore GarageBand from a backup?
OR, can I get another copy of the startup CD that came with my computer so that I can reinstall GarageBand?
Sometimes the AppleStore Support will replace missing installer CDs for a fee.

How to read the data from a file in another computer with user name and password login

How to read read the data from a file in anohter computer which need to login with user name and password?

duplicate post: http://forums.ni.com/t5/LabVIEW/log-on-the-other-computer-with-user-name-and-password/m-p/2061478
duplicate post: http://forums.ni.com/t5/LabVIEW/do-need-to-enter-the-user-name-and-password-when-TCP-ip/m-p/2061612
duplicate post http://forums.ni.com/t5/LabVIEW/log-on-the-other-computer-with-user-name-and-password/m-p/2060682

Get the pc name with domain name and add it to my properties file using commands

i want to get the pc name with domain name and add it to my properties file using powershell .
sid

function Get-Environment{
[environment]|Get-Member -Static -MemberType Properties |
ForEach-Object{
if($_.Name -ne 'StackTrace'){
$v=[scriptblock]::Create("[environment]::$($_.Name)").Invoke()
New-Object PsCustomObject -Property ([ordered]@{Name=$_.Name;Value=$v[0]})
Get-Environment
Get-Environment | Out-String | Out-File environment.txt
¯\_(ツ)_/¯

Is it possible to enter events into a specific iCal calendar, then print a list of those events with the name and date on a single sheet?

Is it possible to enter events into a specific iCal calendar, then print a list of those events with the name and date on a single sheet? I don't need the calendar grid. I just want a list of events on a particular calendar, and their dates. Is that possible?

Not easily. Two possibilities:
1) If all the events have some common feature (eg you have included "XXX" in all the summaries), search for that feature then select and copy the found items at the bottom of the window. You can then paste them into TextEdit or a spreadsheet for printing
2) You could write an Applescript to locate the events and write them into a text file for printing.
The first one will probably give you what you want.

Merge Emails Only group with matching Names and Emails group

Similar Messages

Maybe you are looking for