Merge IDocs: Context problem for 2nd IDoc

Hi,
I have a req:
I have to merge 2 IDocs, material master and classification master. I have used multimaping 2:1. Target is a single soap message with only one statement (like: insert table matmaster values (material, maktx, lable1, lable2, lable3)...)
in SAP, there may not be all classifications maintained for each material. So, the Classification IDoc field E1AUSPM-ATWRT may not be passed to PI.
This segment E1AUSPM repeats in IDoc depends on classifications associated to material. max E1AUSPM segments are 100.
So, if the classifications are not present in SAP, PI is not receiving the Field ATWRT in segment E1AUSPM. (there are some other fields in the segment).
I am passing the MATNR, MAKTX, ATNAM, ATWRT and ATFLV to a UDF(type queue). The MATNR and MAKTX are from MATMAS. The fields ATNAM, ATWRT and ATFLV are from CLFMAS IDoc. These three Fields are from same segment E1AUSPM.
I am using Context in Segment level E1AUSPM. I used "Exists", "RemContxt", "MapWithDefault"... tried all the Node functions.
The problem is the contexts are not populating as per the IDoc data. I am getting inconsistent values in target message.
if I remove context, only first value I am getting to the UDF.
Can anybody suggest me how to feed blank values to the ATWRT context with regards of ATNAM? then I can reed in UDF.
Thanks for your time...

Here is aditional info:
the IDoc CLFMAS Segment E1AUSPM Field ATWRT is not passing (coming) to PI in some segments. This is valid configuration in ECC. Now I have to fill empty context in the place if missed fields.
<E1AUSPM SEGMENT="1">
        <MSGFN>004</MSGFN>
     <ATNAM>FLDCDE</ATNAM>
     <ATWRT>17</ATWRT>                     --- ATWRT present in Segment
     <ATFLV>0.000000000000000E+00</ATFLV>
</E1AUSPM>
<E1AUSPM SEGMENT="1">
     <MSGFN>004</MSGFN>
     <ATNAM>PALHCM</ATNAM>
     <ATWRT>10</ATWRT>                     --- ATWRT present in Segment
     <ATFLV>1.800000000000000E+01</ATFLV>
</E1AUSPM>
<E1AUSPM SEGMENT="1">
     <MSGFN>004</MSGFN>
     <ATNAM>PALHIN</ATNAM>
     <ATFLV>1.900000000000000E+01</ATFLV> --- ATWRT NOT present in Segment
</E1AUSPM>
<E1AUSPM SEGMENT="1">
     <MSGFN>004</MSGFN>
     <ATNAM>PALLCM</ATNAM>
     <ATFLV>2.000000000000000E+01</ATFLV> --- ATWRT NOT present in Segment
</E1AUSPM>
<E1AUSPM SEGMENT="1">
     <MSGFN>004</MSGFN>
     <ATNAM>ROLHWT</ATNAM>
     <ATWRT>25</ATWRT>                      --- ATWRT present in Segment
     <ATFLV>1.800000000000000E+01</ATFLV>
</E1AUSPM>
Above is the structure coming to PI. I am using the context in E1AUSPM level.
When I see the context in Mapping:
ATNAM   | ATWRT | ATFLV
FLDCDE | 17       | 0
PALHCM | 10       | 18
PALHIN   | 25      | 19
PALLCM | -         | 20
ROLHWT | -         | 18
Actually the ATWRT value 25 should come in 5th row. but it moving to 3rd row. I am getting improper order or values into UDF.

Similar Messages

Using Static Variable against Context Attribute for Holding IWDView

Dear Friends,
I have a method which is in another DC which has a parameter of the type IWDView. In my view, I will have an action which will call the method in another component by passing the value for the view parameter. Here, I can achieve this in 2 types. One is - I declare a static variable and assign the wdDoModifyView's view as parameter value and I can pass this variable as parameter whenever calling that method or the second way - create an attribute and assign the same wdDoModifyView's view parameter as its value. Whenever I call this method, I can pass this attribute as parameter. What is the difference between these two types of holding the value since I am storing the same value i.e., wdDoModifyView's view parameter. But when I trigger the action from different user sessions, the first type of code (using static variable) prints the same value in both the sessions for view.hashCode() and View.toString(), but the same is printing the different values when I pass the attribute which holds the view parameter.
Clarification on this is highly appreciated
The problem I face is when I use static variable to get the view instance and export the data using the UI element's id, the data belonging to different user sessions is mixed up where as when I use Context Attribute, the same problem doesn't arise. I want to know the reason why it is so. Is there any other place or way where I can get the current view instance of each session instead of wdDoModifyView?

Hi Sujai ,
As you have specified the problem that we face when we use static attributes, when end users are using the application .
Static means i have n number of objects but the static variable value will remain same every where.
when it is context attribute for every object i.e nth object you have a nth context attribute i mean nth copy of the context attribute.
so every user has a unique Iview parameter , when context is used and
when static is used , assume you have userA , his iview is set this intially and u have another user B , when he is using , since the variable is static and when you access this variable you will get the value of userA.
Regards
Govardan Raj

Context menu for .exe and .lnk slow becaus of nv3dappshext.dll

Hi
I recently made a fresh install of Windows 7 and I'm now noticing that the context menu for .exe and .lnk files opens very slow. With the help of ShellExView it looks like it is caused by C:\Windows\system32\nv3dappshext.dll. If i disable nv3dappshext.dll the
problem goes away. So my first try was to reinstall all Nvidia drivers but that didn't help. I'm now thinking that there is some other file that makes nv3dappshext.dll corrupt.
Is there anyone here that might know what's wrong?
//Simon

Hi Simon, did you keep this disabled? Did you report to NVID.support?
NVIDIA are as bad as Microsoft are as bad as Intel, all kinds of application errors (going for the cleanest build on the planet :) so, given that I don't
have
any 3D-ready devices (ergo)
any superfluous NVIDIA programs*
the DISPLAY DRIVER's all I need, and still I get app issues (recently, disconcertingly, the ominous,
snail-mode 'Kernel Processing Power' event (cores are disabled because of some event/temp?)
BSOD/Shell Crash when extending display to AOC 2036 monitor @ 1920x1080, not gaming!
FIXED by installing NVIDIA's 'system tool' {nTune} (THANKS!!! to Haider
Ali Khan for the tip! TdrDelay QWORD:8 failed to fix, almost bought a new AC Adapter!)
New nTune issues now being monitored....
* Custom install NVIDIA, only select the driver if you're not a gamer, sterescopic not
{yet} required if you're in 2D, Physx Engine only for Steam(online) gamers,
HD AUDIO not required (if you've also got HD Intel doing that for ya :D
I will fix NVIDIA's and Microsoft's mistakes :D I might even upload my (native virtualised) build when done. It's so slick, so nice to have a tool that works, and one that can keep up with your imagination!)

Context menu for toolbox shows wrong menu

when itunes is open, right-clicking on anything in the toolbar (the stuff with the little clock) results in the context menu for the whole toolbar coming up as well as the context menu for whatever i'm clicking on. unfortunately the toolbar one comes up on top so it's super annoying. however, if i wait for the tooltip to show up before right-clicking, it only shows the correct context menu. i think this is just a bug, but does anyone know a fix?

Hi Peter,
If you are using Enterprise Portal to publish those reports to be viewed by the user, i think ur problem may get solved in EP itself. Contact ur EP associate and find out whether it is possible to do this or not. Hope we can do it in that. Otherwise you need to write some JAVA code in WAD which helps in not getting the display as such.
Assign points if this helps u...
Regards,
Koundinya Karanam.

Setting Application Context Attributes for Enterprise Users Based on Roles

Hello,
We have an Oracle 11g database with a table containing data from multiple sites (a SiteID field identifies the site for a record). Since application users can have access to different subsets of sites, we would like to use Oracle's Virtual Private Database feature to enforce row-level security on the table.
I did a successful proof-of-concept with database users. I created a role for each site (example: USER_SITE_A, USER_SITE_B, ...), and then assigned the appropriate site roles to each database user. I then created a package (run via a logon trigger) which set application context attributes for each site. If the current database user has been assigned a role for a given site, then the corresponding attribute named "SITE_PRIVILEGE_SiteID" is set to 'Y'... otherwise, it is set to 'N'. Here is the code which worked to set application context attributes for database users:
-- For each record in my RoleSitePrivileges table, set
--   an attribute named 'SITE_PRIVILEGE_<SiteID>'.
--   If the current user has been assigned a role matching
--   the value in the 'RoleName' field, set the corresponding
--   attribute to 'Y'... otherwise, set it to 'N'.
FOR iPrivRec IN (SELECT RoleName, SiteID
                   FROM RoleSitePrivileges
                   ORDER BY SiteID)
   LOOP
      SELECT COUNT(*)
        INTO roleExists
        FROM dba_role_privs
        WHERE granted_role = UPPER(iPrivRec.RoleName)
          AND grantee = USER;
      IF roleExists > 0 THEN
         DBMS_SESSION.set_context(
                     namespace   => 'my_ctx',
                     attribute   => 'SITE_PRIVILEGE_' || iPrivRec.SiteID,
                     value       => 'Y');
      ELSE
         DBMS_SESSION.set_context(
                     namespace   => 'my_ctx',
                     attribute   => 'SITE_PRIVILEGE_' || iPrivRec.SiteID,
                     value       => 'N');
      END IF;
   END LOOP;To finish things off, I created a security policy function for the table which returns the following:
RETURN 'SiteID IN (SELECT TO_NUMBER(SUBSTR(attribute, 15))
                     FROM session_context
                     WHERE attribute LIKE ''SITE_PRIVILEGE_%''
                        AND value = ''Y'')';This setup worked great for database users. I am now working to do a comparable proof-of-concept for enterprise users created in Oracle Internet Directory (OiD). I have Enterprise User Security (EUS) up and running with OiD, global roles created in the database, enterprise roles defined in EUS with global role assignments, and enterprise roles assigned to OiD users. The enterprise users are able to successfully login to the database, and I can see the appropriate global role assignments when I query the session_roles view.
I tried using the same application context package, logon trigger, and security policy function with the enterprise users that I had used with the database users. Unfortunately, I found that the application context attributes are not being set correctly. As you can see from the code above, the applicaiton context package was referencing the dba_role_privs view. Apparently, although this view is populated for database users, it is not populated for enterprise users.
I tried changing the application context package to use invoker's rights and to query the session_roles view instead of the dba_role_privs view. Although this package sets the attributes correctly when called manually, it does not work when called from the logon trigger. That was an oops on my part, as I didn't realize initially that a PL/SQL procedure cannot be called with invoker's rights from a trigger.
So, I am now wondering, is there another view that I could use in code called from a logon trigger to access the roles assigned to the enterprise user ? If not, is there a better way for me to approach this problem? From a maintenance standpoint, I like the idea of controlling site access from the LDAP directory service via role assignments. But, I am open to other ideas as well.
Thank you!

Hello,
We have an Oracle 11g database with a table containing data from multiple sites (a SiteID field identifies the site for a record). Since application users can have access to different subsets of sites, we would like to use Oracle's Virtual Private Database feature to enforce row-level security on the table.
I did a successful proof-of-concept with database users. I created a role for each site (example: USER_SITE_A, USER_SITE_B, ...), and then assigned the appropriate site roles to each database user. I then created a package (run via a logon trigger) which set application context attributes for each site. If the current database user has been assigned a role for a given site, then the corresponding attribute named "SITE_PRIVILEGE_SiteID" is set to 'Y'... otherwise, it is set to 'N'. Here is the code which worked to set application context attributes for database users:
-- For each record in my RoleSitePrivileges table, set
--   an attribute named 'SITE_PRIVILEGE_<SiteID>'.
--   If the current user has been assigned a role matching
--   the value in the 'RoleName' field, set the corresponding
--   attribute to 'Y'... otherwise, set it to 'N'.
FOR iPrivRec IN (SELECT RoleName, SiteID
                   FROM RoleSitePrivileges
                   ORDER BY SiteID)
   LOOP
      SELECT COUNT(*)
        INTO roleExists
        FROM dba_role_privs
        WHERE granted_role = UPPER(iPrivRec.RoleName)
          AND grantee = USER;
      IF roleExists > 0 THEN
         DBMS_SESSION.set_context(
                     namespace   => 'my_ctx',
                     attribute   => 'SITE_PRIVILEGE_' || iPrivRec.SiteID,
                     value       => 'Y');
      ELSE
         DBMS_SESSION.set_context(
                     namespace   => 'my_ctx',
                     attribute   => 'SITE_PRIVILEGE_' || iPrivRec.SiteID,
                     value       => 'N');
      END IF;
   END LOOP;To finish things off, I created a security policy function for the table which returns the following:
RETURN 'SiteID IN (SELECT TO_NUMBER(SUBSTR(attribute, 15))
                     FROM session_context
                     WHERE attribute LIKE ''SITE_PRIVILEGE_%''
                        AND value = ''Y'')';This setup worked great for database users. I am now working to do a comparable proof-of-concept for enterprise users created in Oracle Internet Directory (OiD). I have Enterprise User Security (EUS) up and running with OiD, global roles created in the database, enterprise roles defined in EUS with global role assignments, and enterprise roles assigned to OiD users. The enterprise users are able to successfully login to the database, and I can see the appropriate global role assignments when I query the session_roles view.
I tried using the same application context package, logon trigger, and security policy function with the enterprise users that I had used with the database users. Unfortunately, I found that the application context attributes are not being set correctly. As you can see from the code above, the applicaiton context package was referencing the dba_role_privs view. Apparently, although this view is populated for database users, it is not populated for enterprise users.
I tried changing the application context package to use invoker's rights and to query the session_roles view instead of the dba_role_privs view. Although this package sets the attributes correctly when called manually, it does not work when called from the logon trigger. That was an oops on my part, as I didn't realize initially that a PL/SQL procedure cannot be called with invoker's rights from a trigger.
So, I am now wondering, is there another view that I could use in code called from a logon trigger to access the roles assigned to the enterprise user ? If not, is there a better way for me to approach this problem? From a maintenance standpoint, I like the idea of controlling site access from the LDAP directory service via role assignments. But, I am open to other ideas as well.
Thank you!

Subclips from Merged clips sync problem

Hi all,
I'm hoping someone has some insight into a problem I'm having. When I sync audio to my TK dailies, I usually go through the following steps:
1. Sync video clip and audio clip in the timeline.
2. Trim the ends so that I get rid of all the audio and video at the beginning and end I don't need.
3. Link audio and video.
4. Drag linked clips to browser, thus creating a merged clip. This clip will have the in and out I set in the timeline, but the media start and stop will be the original clips' lengths. Because this means I usually have a big long useless bunch of audio at the beginning with no picture, I like to get rid of this, so I:
5. Create a subclip from the merged clip in the browser. This creates a new clip with the media start and end at the point of the former merged clip's in and out. No extra media to clutter things up.
HOWEVER, for some reason this isn't working for me now. When I create the subclip, Final Cut does make the in and out points the new media start and stop times for each individual audio and video clip, but it syncs the clips randomly, so I have sound with no image, then a little random overlap, then image with no sound. If I drag this new subclip made from the merged clip to the timeline, I can unlink and relink to restore the proper sync, but obviously this is a huge pain.
This has never happened to me before, and I've used this method for a while, I THINK from before FCP 6. But right now I'm working on an FCP 5.1.4 again so perhaps it's just something that works in 6? Though I'm almost sure I did it before version 6 successfully.
Does anyone know what's up with this? Or have any ideas for another method to get to the same result? There probably is a better way to do this anyway!
Thanks,
Nayeli

Well, I spoke too soon. That DID turn out to be the problem for that one project, which was at 29.97 non drop frame in general, but for some reason the sound imports as drop frame (though the sound guy assures me it's non drop and all my setting are non drop).
However, I'm having the same problem now in a 24fps project, where I have audio at 48KHz with 24fps timecode and I did a reverse telecine on the original 16mm video. I noticed, however, that though the telecine had no audio, empty audio was captured, and it thinks this audio was at 48048 Hz. This remains even after the reverse telecine. Could this be the problem in this instance?

Context menu for tree node cannot be accessed in IE 8 (Jdev 11.1.2)

We use an af:tree with context menus for performing operations on each node. In IE 8 when you hover over a node before right clicking, "tooltip" text appears which basically just re-displays the text of the node. Even though the tooltip text is annoying, the context menu worked fine in 11.1.1.4, but now in 11.1.2 when you right-click on that tooltip text you get the "normal" browser context menu for text -- we no longer get our custom context menu.
You can see this same problem on the tree in the rich faces demo: http://jdevadf.oracle.com/adf-richclient-demo/
Sometimes, if you're quick enough, you can get the custom context menu to work, but it seems that once you've hovered long enough over one node to get the standard context menu, you're stuck and any node you click on will display the browser's normal context menu.
This is a big problem for us because we rely on these context menus and most of our administrative users are on IE 8. Is there a workaround or can the tooltip text somehow be shut off? It doesn't appear in Firefox so Firefox works fine.
Thanks.
-Ed

Hi,
if this works on IE 7 you can force the app to run in IE7 compatibility mode
See "Run ADF Faces applications with IE 9 in IE 8 compatibility mode" http://www.oracle.com/technetwork/developer-tools/adf/learnmore/april2011-otn-harvest-367335.pdf
Works the same for IE8 to IE7. This then gives you a solution for until the issue is solved
Btw.: If users click onto the folder icon (not the text, which brings up the tool tip) then the context menu work. I'll file a bug anyway
Frank

STK problem for iPhone5? like the basic display

I found some problem for iPhone 5/6 STK's support. the display proactive command,
if the text is very simple, it's ok. like display"hello";
but for the following text with return "0D0A" format
D081D28103012180820281028D81C604436865636B41637442616C20537563636573730D0A4F534E 3A31303030203030303020303131300D0A547820446174653A31312F31312F323031340D0A547820 54696D653A31343A32343A31320D0A547261636B20436F64653A3030343134310D0A53656E646572 204E616D653A4368616E2050696B53616E0D0A4163636F756E74204E756D6265723A343834382034 383030203030303020303230300D0A4163636F756E742042616C616E63653A35382C3830302E3030 0D0A5478204665653A302E3030
the ascii string should be :
CheckActBal Success
OSN:1000 0000 0110
Tx Date:11/11/2014
Tx Time:14:24:12
the terminal response is 801400000D 81030121800202828103022001, mean screen is busy.
is the iphone not support the return character?(i already tried to change the return character to 0x0D, same problem, but for androin phone, it works very good.)
who can help me? Thnx

lets say u restricted the first column like this
bring amount in columns
right click edit
bring in fiscal period from left to right from time dimension
right click fiscal period
hit restrict
enter range of variables
hit ok
hit ok
copy this amount
paste it
now go in 2nd amount
go to fiscal period and hit restrict
u see variable
select variable and right click and hit SET OFFSET
enter -12 twice
now i am asking u to create interval between two variables whose entry is single value
becos
u will use text variable for display
and text variable will only take single entry variable for replacement
so use text variable
go to dispaly and hit Entry of variable
create new variable
hit replacement path
processing by fiscal period
got to replacement tab
replace variable with variable
choose ur 1st entry variable
similarly create another variable with selecting another variable
now use proper offset length and offset start for proper display
i dont know which time char will u use but my assumption
is with respec t to assumption
u will use fiscal period

ALV: how to save context space for large tables ?

Dear collegues,
We are displaying an ALV table that is quite large. Therefore, the corrsponding DDIC structure and the WD context is large. This has an impact on performance and the load size of the program. Now we will enhance the ALV table again.
Example: for an icon and its explaining tooltip that are displayed in the ALV: there is are context fields required like "SOURCE_FIELDNAME" for the tooltip as well as for for the icon. They need a lot of characters for each tooltip and icon).
Question: do you have an idea, how to save context space for those ALV fields ?
Best regards,
Christian

>We are displaying an ALV table that is quite large.
Do you mean quite large as in a large number of columns or as in a large number of rows (or both)? I assume that the problem is probably more related to a large number of rows. For very large tables, you should consider using the table instead of the ALV. For very large tables you can even use a technique called context paging to keep only a subset of the data in the context memory at a time. Here is a recent blog that I created on the topic with demonstrations of different techniques for table sharing, shared memory, and context paging when dealing with large tables in Web Dynpro ABAP:
Web Dynpro ABAP: How Fast Can You Consume 1 Million Rows?

CNET Reports: iCloud our for 2nd Day....

http://reviews.cnet.com/8301-13727_7-57511311-263/icloud-outage-affecting-users- for-two-days-running/
Here is an article I found on Cnet, that reports iCloud being down for 2nd day, with no explanation of why, or when it will be back up.
I am posting this so you won't think it's YOUR computer.

Praise goes to Anthony Rayner_ (http://anthonyrayner.blogspot.com/) for a very instructive blog and smooth example applications.
Anyway, found out what the problem is: Some of my columns are derived from LOVs. In the column 'Report properties > List of Values > Column filter type' my default was 'Use defined list of values to filter exact match', so always all lov entries are available as filters. With e.g. 'Default based on Column type', the application now actually only states values present in the current (potentially pre-filtered) view.
I guess sometimes it is easy... :-/
Thanks for the help offered. Nice to see this forum working so smoothly
BR,
Martin

Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
After that is done reboot the machine and see if you can log in.
If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
Reboot and try again.
If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
Lots of work, but there is no Lion disks.
https://discussions.apple.com/message/16276201#16276201

Hi team , I have some questions/Problem for my product apple (iPad,iPhone) , I want to employee speak and type thai language

Hi team , I have some questions/Problem for my product apple (iPad,) , I want to employee that can speak or response me in thai language
1. ผม อาคเนย์ พำนักอยู่ประเทศไทย กรุงเทพฯ มีปัญหาสอบถาม ดังต่อไปนี้
- กระผมได้ทำการตัดบัตร เครดิต เพื่อซื้อเกมส์ผ่าน itune store ผ่าน apple itune ID : misskor.yaprom@*** เพื่อซื้อเกมส์ Eleves Realm ในวันที่18 ก.ค. 56 เวลา 17.07น. ซึ่งทางบัตรเครดิตได้แจ้งเรียกเก็บเงินมายอดเงิน 39.99$ ซึ่งในระบบจริงๆ ทางกระผมต้องการตัดในยอด 99.99$ แต่พอได้ประสานงานไปยังธนาคาร ได้รับการแจ้งกลับมาว่า ได้ทำการตัดบัตรในยอดเงิน 39.99$ ซึ่งในความเป็นจริงนั้น กระผมไม่ได้สั่งซื้อเกมส์ในยอด 39.99$ ซึ่งในยอด 99.99$ นั้นพยายามตัดในระบบบัตรเครดิตอยู่ แต่ทางกระผมได้ยืนยันกลับไปว่าไม่ให้ระบบตัดนะครับ เพราะว่าเนื่องจากมีปัญหาในการชำระเงินระหว่าง Apple itune store อยู่
- ทั้งนี้ขอให้ทางเจ้าหน้าที่ประสานงานตรวจสอบ apple itune ID : misskor.yaprom@*** เพื่อซื้อเกมส์ Eleves Realm ตามที่ได้ให้รายละเอียดโดยด่วนว่าเป็นเพราะว่าระบบมีปัญหาหรือว่ามีอะไรเกิดขึ้นในข ั้นตอนการชำระเงินครับ
รบกวนประสานงานกลับมายังกระผม อาคเนย์ ที่หมายเลขโทรศัพท์มือถือ +**** / reply feedback email : lekod1@*** โดยด่วน ในวันศุกร์ที่ 19 ก.ค. 2556 ครับ
ขอบคุณครับ
อาคเนย์ อุดปิน
กด
<Edited By Host>

Google translation:
พนักงานของ iTunes Store จะไม่ได้อ่านข้อความในเว็บบอร์ดนี้ ถ้าคุณต้องการความช่วยเหลือสำหรับปัญหาที่มีใน iTunes Store, คุณจะต้องติดต่อกับพวกเขาผ่านทางแบบฟอร์มเว็บนี้:
http://www.apple.com/emea/support/itunes/contact.html

Problem for releasing blocked sales order on Creditlimit

Hi Gurus,
        I a   hve a problem for releasing blocked sales orders
         what i have done: 1)i have blocked sales order based on exceeded creditlimit
         (i have change SDType in 'OVAK' is 'C')
                  2)now i have to release for furthur processing so i have done following steps
                  3)Goto VKM3/VKM1 T.Code and then release what order that is blocked.
                  4) order will appear in the list.
                  5)Select that one.
                  6)Click on the green flag that appears on the left hand side.
                  7)Click on save.
                  8)click on back it will ask for "Leave list".
                  9)Click on yes.
                  10)It said that Sales orer has been released
Still what my problem is:
Problem: 1)So i'm trying to create deliver for Sales order but it shows an error
         2)"Sales order is blocked for delivery: Credit limits" Even it was released
Plz kindly help me what i do....
Thanks In Advance
sivakumar

sorry   i was unfotunately put this thread here over in SD

I have been using Elements 12 without a problem for 9 months. Now when I try to open the program, I get an error message "Adobe Photoshop Elements 12 quit unexpectedly" and it will not open at all. What can I do to open the program?

I have been using Elements 12 without a problem for 9 months. Now when I try to open the program, I get an error message "Adobe Photoshop Elements 12 quit unexpectedly" and it will not open at all. What can I do to open the program?

Thank you for responding. Nothing actually worked! After reading the posts online, I called Apple. They indicated they have seen problems with some software after their upgrades. The technician was able to fix the problem on my computer remotely, but I have no clue what he did! But, it was definitely related to their recent upgrade to my computer.

I can use my appleID without any problems for using to download new apps in the app-store or Itunes - Problem: I can´t use my ID at facetime and Imessage - I´d like to add an EMail account on top to my mobile number. My password will not be accepted!!!???

I can use my appleID without any problems for using to download new apps in the app-store or Itunes - Problem: I can´t use my ID at facetime and Imessage -
I´d like to add an EMail account on top to my mobile number to use more this services. My password will not be accepted!!!??? I try it and i try it and i try ist, throughout the same problem. Whats on? The user help desk said, i´ve to reset and use the WLAN key new as well as possible - no way!

Contact the App store for Apple ID help. Their support link is on the right of the App store window
LN

Merge IDocs: Context problem for 2nd IDoc

Similar Messages

Maybe you are looking for