Merge Library Fails - Claims Duplicate Library

I am attempting to merge to Libraries. When I select the newer library as the file to import into the older Library I get an error message stating: The library could not be imported because it is a duplicate of the library currently running. When in fact they are not the same libraries. The names are different and there are altered images as well as new images.
I tried repairing both Libraries. Each Library are on different drives.

I'm having the same problem Michael reported (running Aperture 3.2.2 on 27" iMac with Lion 10.7.2 or Macbook Pro with Lion 10.7.2).
J.F.'s response looked hopeful although it was a bit vague on some details.
I tried various steps (see below), and nothing resolved the problem.
HAS ANYONE WITH THIS ISSUE FIGURED OUT A SOLUTION?
I had made a copy of my iMac aperture library to a mobile drive.
I then updated the iMac library and wanted to merge those changes back into the library copied onto the mobile drive. It doesn't work: on my iMac I get the error that the libraries are duplicates (NOT true!).
Building on J.F.'s info, I tried a few things in vain (starting with two originally-identical libraries: original iMac aperture library [modified after copying to mobile drive], and mobile aperture library that is a copy of the original iMac aperture library copied onto my mobile drive before I made some further mods to the iMac aperture library):
* All on the iMac: option-click Aperture icon on iMac and select to create new (empty) library (on iMac hard drivez), then copy over DataModelVersion.plist from this new (empty) library into mobile library; open mobile library and merge into original iMac library: SAME ERROR
* iMac+macbook pro #1: move mobile library drive to Macbook Pro and open there (even modified one image with an added caption), then moved mobile library drive back to iMac and open there and try to merge in original iMac library: SAME ERROR
* iMac+macbook pro #2: option-click on Aperture icon on macbook pro and select to create new (empty) mobile library (on mobile drive!), then move mobile drive back to iMac and on iMac copy over DataModelVersion.plist from new (empty) library on mobile drive to original mobile library; open this original mobile library and merge in iMac library: SAME ERROR.
Looking for help!
Regards,
Colin

Similar Messages

A required application library failed to load and the product cannot continue

Seems like I go through this problem time and again with Photoshop + Acrobat CS2 and still have yet to resolve a way of fixing it short of completely wiping my drive and re-installing Windows (XP Pro) The error is "application library failed to load and the product cannot continue"
If there is anyone out there that has figured out a way to fix this issue please fill me in.
This time I went as far as a complete and though removal of all Adobe products from the system and the registry and then completely reinstalled the product.
I have forgone purchasing CS3 because of this issue as I am 99% sure that it has still not been resolved.
Basically Photoshop and Acrobat are useless at this point and I am using an old version of Picture Publisher and Macromedia Fireworks to complete my work. This I assume is good advertising for Adobe :)
Anyone have any ideas????
See this post in the forum "could not complete your request because of a program error", PDF format, cs2, xp" as this is an ongoing Adobe issue that they have completely blown off!
I am working on
Adobe Photoshop Version: 9.0.2 (9.0.2x296)
Operating System: Windows XP
Version: 5.1 Service Pack 2
System architecture: Intel CPU Family:15, Model:2, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, HyperThreading
Physical processor count: 1
Processor speed: 2798 MHz
Built-in memory: 2559 MB
Free memory: 1812 MB
Memory available to Photoshop: 1758 MB
Memory used by Photoshop: 55 %
Image cache levels: 6
Serial number: XXXXXXXXXXXXXXXXXX (I have a legal copy)
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS2\
Temporary file path: C:\DOCUME~1\JIMSHE~1\LOCALS~1\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 128.0G, 65.5G free
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS2\Plug-Ins\
Additional Plug-ins folder: not set
Installed plug-ins:
ADM 3.10x21
ASDStrm 1.03x2
Accented Edges 9.0
Angled Strokes 9.0
Average 9.0 (9.0x196)
BMP 9.0 (9.0x196)
Bas Relief 9.0
Camera Raw 3.7
Chalk & Charcoal 9.0
Charcoal 9.0
Chrome 9.0
Cineon 9.0 (9.0x196)
Clouds 9.0 (9.0x196)
Color Halftone 9.0 (9.0x196)
Colored Pencil 9.0
CompuServe GIF 9.0 (9.0x196)
Conditional Mode Change 9.0 (9.0x196)
Contact Sheet II 9.0 (9.0x196)
Conté Crayon 9.0
Craquelure 9.0
Crop and Straighten Photos 9.0 (9.0x196)
Crop and Straighten Photos Filter 9.0 (9.0x196)
Crosshatch 9.0
Crystallize 9.0 (9.0x196)
Cutout 9.0
Dark Strokes 9.0
De-Interlace 9.0 (9.0x196)
Difference Clouds 9.0 (9.0x196)
Diffuse Glow 9.0
Displace 9.0 (9.0x196)
Dry Brush 9.0
Embed Watermark 1.70.19
Export Transparent Image 9.0 (9.0x196)
Extract 9.0 (9.0x196)
Extrude 9.0 (9.0x196)
FastCore Routines 9.0 (9.0x196)
Fibers 9.0 (9.0x196)
Film Grain 9.0
Filmstrip 9.0 (9.0x196)
Filter Gallery 9.0
Fit Image 9.0 (9.0x196)
Fresco 9.0
Generic EPS 9.0
Glass 9.0
Glowing Edges 9.0
Grain 9.0
Graphic Pen 9.0
HDRMergeAlign 9.0x001
HDRMergeUI 9.0x001
Halftone Pattern 9.0
Ink Outlines 9.0
Lens Blur 9.0
Lens Correction 9.0
Lens Flare 9.0 (9.0x196)
Lighting Effects 9.0 (9.0x196)
Liquify 9.0
MMXCore Routines 9.0.1 (9.0.1x289)
Merge to HDR 1.0x001
Mezzotint 9.0 (9.0x196)
Mosaic Tiles 9.0
Multiprocessor Support 9.0 (9.0x196)
NTSC Colors 9.0 (9.0x196)
Neon Glow 9.0
Note Paper 9.0
Ocean Ripple 9.0
OpenEXR 9.0 (9.0x196)
PCX 9.0 (9.0x196)
PNG 9.0 (9.0x196)
PNG Icons 1.22x1
Paint Daubs 9.0
Palette Knife 9.0
Patchwork 9.0
Paths to Illustrator 9.0 (9.0x196)
Pattern Maker 9.0 (9.0x196)
Photo CD 9.0 (9.0x196)
Photocopy 9.0
Photomerge 9.0 (9.0x196)
PhotomergeCylmap 9.0 (9.0x196)
PhotomergeRender 9.0 (9.0x196)
PhotomergeUI 9.0 (9.0x196)
Picture Package 9.0 (9.0x196)
Picture

John,
foud your message very helpfull. I experience the same problem when strating a CS2 program (Photoshop, Indesign,...) over a terminal server connection.
It's weird because starting more than one instance is possible (despite what's written in the article ) as long as the users have administrative rights. I've encountererd this problem because my daughter of 11 wants to use Photoshop now. I have a terminal server set up so the kids may experiment with their own desktops whithout the risk to screw it up and because I can access all my programs from wherever I want.
But as I found out now I must buy volume licensing instead of retail (even if it's for just one instance...)
Want to know if possible how "difficult" it was to change your retail to a volume licensed version? Did you have to pay the full amount again? Hope an upgrade exist from Creative Suite CS2 - retail to Creative suite CS3 - volume licensed for the same price as from retail to retail... Or am I hoping to much?
Kind regards and thanks for your info,
Patrick

After adding folders to iTunes library, now have duplicates of each song

I store all my music on a separate drive, M:\
I have a specific file structure setup that has worked for me for years, M:\Artist\Album
I recently received an iPod for my birthday, and started using iTunes. After adding my music drive (M:\) for inclusion into the library (without "keep..." and "copy..." selected, as to keep my current file structure intact), when selecting "File->Display Duplicates" just about every song in the library has a duplicate, one in the original folder "M:\Artist\Album", and another in "M:\Playlists\..\Artist\Album". I understand that basically somehow iTunes glitched and started in the "M:\Playlist" directory when adding to the library at some point, however I am at a loss as to how. In my actual folders I only have 1 copy of each song, so basically iTunes is making a symbolic link to each song and adding it into the library as a separate song.
I have over 9000 (must...resist...meme...) songs in my library, and removing and restoring takes quite a while. I'm pretty sure I'm going to have to do this at least once now, but any ideas as to why or advice on how to avoid this particular problem in the future?
I am pretty set in my ways of my current file structure, since I don't use iTunes as my primary media software, so I would prefer to not have to resort to succumbing to just letting iTunes handle everything the way it wants (I pretty much hate that).
Thank you for any suggestions you may have.
EDIT: Is there a way to have iTunes rename/move files when adding to its library to specific folders via custom rules based on ID3 information (i.e. WMP rip settings)?
Message was edited by: kaziekama

If you have "Keep..." and "Copy..." unchecked, iTunes will simply reference the existing file, and will not change your file structure, as you correctly note.
I'm fairly sure that some other program is operating on your files. The "Playlists" folder that you mention has nothing to do with iTunes. On my PC, only Windows Media and Roxio use it.
To your question +"Is there a way to have iTunes rename/move files when adding to its library to specific folders via custom rules based on ID3 information (i.e. WMP rip settings)?"+ the answer is no. When iTunes rips a CD, it names the files as track number and title, with no option to do differently. And as far as placing the ripped files, they go in Artist/Album, with no option to do differently. As full-featured ripping programs go, iTunes is not even in the race.

External hard drive failed, lost music library. Any way to get music library from iPod classic to itunes on PowerBook G4?

External hard drive failed, lost music library. Any way to get music library from iPod classic to itunes on PowerBook G4?

Recover media from iPod
See this post from forum regular Zevoneer for options on moving your iPod data back to your computer.
tt2

Failed to load library mda_sap

Hi people,
I want to publish a Query with the Query as a Web Service. But I get the next message error:
Failed to load library mda_sap. System error message: the specified module could not be found (WIS 10901)
I´ve tried with this notes:
1257495 - In Designer, connection test to SAP BW universe gives warning: << DBD: An error occured while trying to load the provider for transport SAP. Failed to load library mda_sap. >>
But this point on the resolution"Include missing "Data Access" components that are NOT selected (< Unavailable >)" I can´t found it.
And the note that explains about to install the Fix pack 1.7 and 1.8, and copy the dll fxu8.dll from server to client, don´t work.
Any solution???
More thanks.

The resolution of this note is:
Resolution
   0. Uninstall the Integration kit. (client side)
   0. Uninstall the last FP on the BO enterprise. (¿server side?)
   0. Restart the machine. (¿server side?)
   0. Reinstall the BOE FP. (¿server side?)
   0. Reinstall the Integration Kit.(client side)
Note: If the above steps couldn't resolve the issue. You may need to do a clean reinstall from the scratch.
The integration Kit has to be installed on the client side or server??
More thanks
Edited by: Ruben Torres on Aug 4, 2010 4:33 PM

Creating a duplicate library in a different audio format (MP3)

My iTunes library is in Apple Lossless format, but as that takes up a fair amount of storage space, I can't store as many songs as I'd like on my iPod. Therefore, I'd like to create a mirror library in MP3 format.
I'm trying to determine the easiest way to do that. The not-so-easy way seems to be to duplicate the entire library, then in the duplicate library, use the Advanced/Convert Selection to... command to convert to MP3, then delete all the Lossless songs from that library (doing the conversion in the original library and having two versions of every song would seem confusing when you want to play stuff). My library is currently stored on an external drive, which works fine.
Am I crazy, is there a more straightforward way to do this? Is it possible to export the actual song files while converting them at the same time?
Thanks.

There is a way to sort your library by recording type. In the main iTunes window, right click (control/click) on the column headings, then select "Kind", then click on the Kind column to sort by recording type.
Still, wish somebody would answer our question!

Multiple song titles in library despite no duplicate files

Hi y'all. I am really a Google guy, but I am kinda ocd about my files, and when I open Itunes, I should see a regular and a lossless file in my library. Instead I see three, four, five of the same song. I went through and deleted the duplicates, they were from using my droid x2 as a backup device for a while, and then I accidentally re-imported the files twice. (But not five times like the library might suggest)
Basically, I wanna get rid of the clutter, and then figure out how I can take the lossy files off my computer, or consolidate the song names, and just have the lossless versions play, and eventually get lossless onto my google play account, which will not support the Apple M4a format. So I am thinking FLAC is what I hould be converting to. Ideas? I know this is probably NOT the community to come to with Android problems, but please if you have some beef on the Apple/Android crap, save it, I couldn't care less why Apple is the best. I just wanna get my files and all in order, and since this is an Apple problem for the most part, I am asking the Apple community.

Move all your music files outside the iTunes folder to another location (make a new folder for the occasion).
Delete the iTunes library file in the iTunes folder (make a backup copy for safety)
Start iTunes. Your library should be empty.
Select "add to library" and select the folder with your music files.
This should give you a brand new library with no duplicates unless the music files themselves have duplicates.
Check if all your music had been moved back to the ITunes Music folder.
Check if the music you bought from the Music Store can be played (you may have to authorize your computer again, but this seems unlikely).
Delete the folder where you copied your music to, once you're certain everything is back in place.
asimov
Dual G5 2,5 GHz Mac OS X (10.4.7)

Duplicate library within Aperture 3

I'm a novice user whose not gonna know all the relevant information the knowledgeable and helpful folks will need to thoroughly answer my question, but here's the best I can do. Perhaps with specific questions, I'll be able to provide more information.
The problem: Aperture contains two librarys: (1) iphoto Library and (2) Project Library. Project Library is larger and all projects and photos within the iphoto Library are duplicates of projects and photos within the Project Library.
Solution I'm working towards: eliminate the duplicate iphoto Lilbrary.
Facts: I do not know how Aperture was initially set up and how the iphoto Library was imported into Aperture, as hubby did that quite some time ago. My masters are now referenced on an external drive. My husband and I both tried to figure out how to properly do this and I just noticed that there were two duplicate folders on our external drive. I effectively housed the masters in a folder on the external called "Aperture Masters." I just attempted to send to trash the two duplicate folders: one named "iphoto library" and the other named "TSP photos." I left the folders in the trash and have not emptied them from the trash.
After I sent these duplicate folders from the external drive to the trash, I opened Aperture again, and the duplicate iphoto Library is still there. However, the icon that shows that it's a referenced file now has a yellow triangle with an exclamation mark on it. When I click "locate master," it shows me the external drive and the path to the photo I had selected in the iphoto library within Aperture is in red (indicating there's a problem with it). I located the same photo within the Project Library and there is no yellow triangle with exclamation mark on it on the referenced icon and when I click locate master, I can do so without the path showing in red.
Question: Is the final step simply to empty the Trash and then the duplicate library will be gone? Is there anything else with which I need to be concerned to properly eliminate the duplicate library?
Thank you for your time in answering!

One thing to remember is that Aperture does not contain libraries. Aperture libraries are the places where your images are stored to be accessed by the Aperture application. You can have multiple libraries on your system at any one time but only one copy of Aperture the application.
So if I am understanding your situation: You have two Aperture libraries one named iPhoto and one named Project. The Project library contains everything that is in the Aperture library named iPhoto (bad choice of names BTW as it is easy to get confused with iPhoto itself) plus more.
The two libraries do not share any masters.
You now want to delete the Aperture library named iPhoto. You moved referenced masters that this library was referencing to the trash.
This is what I would do: Open the Project library, go to the Photos icon in the Library tab of the Inspector. Make sure the search box says Showing All, select all the images and open the filter HUD and filter for missing images like so:
If the browser is empty then all the images in this library are accounted for and you can empty the trash and delete the Aperture library named iPhoto. If anything shows up then you need to figure out what's going on before you delete anything.
good lick.

My ITunes Library has a Duplicate of every song

Trying to load music on a new IPod. Have discovered that My ITunes Library has a duplicate of every song. Makes it very difficult to transfer albums.

If the duplicate copies all have the same date then you could do show duplicates, then sort by date added, and delete those with the new date.

Duplicate Library Items?

Hello. I am VERY new to Flash, although I'm doing quite well on the project I'm having to learn it for. So far I have been able to figure out what I need. I have found a very nice tutorial site, but the gentlemen's videos are 20 minutes long (at least), and they are excellent, however I don't have time to go through all kinds tutorials. I do do them when I can, but the projects I undertake need to be published with expediency and I just don't have time to go through step by step. I've always been a "learn by doing" person, anyway.
My question is: (sorry if it's basic)
When I open the library, I went through and deleted some of the components that were mistakes. I am using a GIF that was converted to a SWF in one layer, and I noticed that in the library there are duplicate frames of this item. One group are bitmaps and the others just say "graphic". They are exact duplicates of each other except that the "graphic" items all have the little edit button on them (the little "bullet-like" circle). When I imported my SWF, I did have to edit each frame to make it appear and fit on the screen the way I wanted it to. Are these graphics the edited versions of what I've done? I don't want to delete them if they're referenced to the original frame. Obviously, I want to discard any unused library items so I can keep my file size down, but I don't want to delete them if they're supposed to be there (cuz I really don't want to have to do all that editing again if I mess it up). Or are they extras from perhaps I duplicated them accidentally somehow?
Thanks for the help!
~Jessica

In the upper right corner of the Library window there is a contextual menu button. That will open a menu. In that menu, near the bottom are two options for showing the usage of each item in the Library. This will help you to know what is used in the timeline.
Those graphics objects are the representation of the bitmaps that were imported. You use the graphic. The graphic uses the bitmap. Don't delete either one. The size of the .fla file has no bearing on the size of the .swf file that you create. The .swf will only contain and use the items from the Library that it actually needs.
Cleaning up your Library is a good practice, but you don't need to obsess over it.

Failed to load library 'dxva2.dll' appeared at Sky...

Hi, everyone,
I encoutered the issue about failed to load library 'dxva2.dll' again.
My os is Windows XP SP3 Professional.
After I installed Skype 7.5.73.102 and then it started first time automatically.
The error message appeared such as Failed to load library 'dxva2.dll' again.
What's wrong with Skype 7.5.73.10X?
How could I solve the issue which appear again?
Best regards,
Steven.

Your Windows XP is more than likely missing mandatory Windows updates that are needed in the latest version of Skype. To resolve the problem, you can get those updates here:
http://community.skype.com/t5/Windows-desktop-client/Fatal-error-fail-to-load-library-dxva2-dll/m-p/...

Duplicate images = duplicate library from restore?

I'm very confused. Because of issues in A3, I restored back to A2 and rebuilt, actually restored a couple of times, etc, then REMOVED (I thought) all of my libraries from A3 access so that I could do a clean A3 install and upgrade. (My A2 library was temporarily in the TRASH, and my current A3 library was relocated to a desktop folder, as suggested on another troublshooting thread here).
So, I opened up A3 after this install, and there were all my photos again, and some doubled. Where would A3 have accessed my photos from if they were in the trash and another folder? I was expecting to direct A3 to the folder myself on this "clean install. So now, I'm thinking my huge library is doubled up in here somewhere, and how do I find duplicates from my restores and delete them?

Might be better to start with the clean and empty library you intended to begin with. If you want to recover your library rather than reconstruct one, do you have a good Aperture Vault or backup you trust to do the recovery?
Not sure where Aperture is finding eveything by what you describe, however you might quit Aperture and search for all your current locations of the Aperture Library and rename each one to be more descriptive (at least temporarily). For example, rename various files as appropriate to make each unique, such as *Aperture 2 Library OLD*, *Aperture 3 Library OLD*, etc.
Within Aperture 3, you can create a new *Aperture 3 Library* using the File -> Switch to Library command. That panel will display all the Aperture libraries you have, but you may want to create a new empty library and them Import as appropriate.
Post if I’m not clearly stating this...

Duplicate /library/ made by mistake

I need some help. My 70+ year old mom called in a panic, as it seems she has created a duplicate /library/ folder. Since this has happened she can log into her account (she has admin permissions), but can not connect to the internet, email or anything else. I am guessing that since there are two /library/ folders it can't locate items to run these. I am 200 miles away trying to troubleshoot for her. What can I do, short of reinstalling the OS? Any suggestions would be great.
Her system: iMac G5 intel, OS 10.4.11
Appreciate your help in advance.

I need some help. My 70+ year old mom called in a panic, as it seems she has created a duplicate /library/ folder. Since this has happened she can log into her account (she has admin permissions), but can not connect to the internet, email or anything else.
you may have missed diagnosed the problem. Not being able to do e-mail is a symptom of a bad ~/Library because this is where Mac OS saves your mail.
What she mean by not being able to do Internet? I would think you could do Internet but no bookmarks.
Nor would your desktop look the same. Perhaps she is saying she cannot Find the internet browser. This would be a symptom of the a bad user library. It is possible for the user to rename their library folder. It is not possible for the administrator to rename the System Library folder from the GUI interface without some clever use of the getinfo command. Just because your administrator does not mean you can go and change system files without doing some administrator type things. The administrator does not own system files. The system owns system files.
Is so, there is /Library and ~/Library. Which one was change? ~/Library is the more likely. For example, /Users/mac/Library
you will note ~ means the current users directory path. For example. /Users/mac
There is a mistake with these commands.
The commands are missing a sudo and there is the matter of the /.
There is also the matter of two library folders. There is one library folder /Library and there is a another library folder in the user's account /Users/mac/Library. Which one are we talking about?
But my reading of the problem was that it was the user's Library account. If it was the system's library account that is another problem, which I was not addressing. I don't think the system would run at all if it was this one however.
And you need to make any changes to /Library from a single user mode.
You need to get into single use mode for steps one and two that are listed below.
This page will tell you how to get into single user mode.
http://www.securemac.com/macosxsingleuser.php
Basically, you hold down the command-s key then powering on your machine. The command key has a little apple symbol on the lower left. It is between the alt/option key and the space bar. On a PC keyboard, it will be the windows key, I think.
1) You can change the password on an account. ( Do you know Unix. You are in a Unix single user console. ) The setup commands you need should be listed on the screen. For Mac OS 10.4.11, the commands are:
# Type the follow two instructions to accessing the startup disk in read/write:
/sbin/fsck -fy
/sbin/mount -uw /
cd /
pwd
ls -lF L*
mv -i Library Library_new
mv -i "Library 1" Library
This commands are for a user account...
run these commands from an administrator account that is not the problem account.
Macintosh-HD -> Applications -> Utilities -> Terminal
cd /var/root
pwd
sudo ls -lF L*
sudo mv -i Library Library_new
sudo mv -i "Library 1" Library
It is a good that people are reviewing these commands. It is easy to make a mistake.
Than here is what these commands maybe:
cd is change directory
pwd is a print working directory
ls is list
sudo is Super user do
mv is move
for cryptic comments you can always uses the manual command which is man. for example:
man mv
Message was edited by: rccharles
Message was edited by: rccharles

Flash Builder 4.5 Plugin Error: Failed to load library.swf

Hi,
I am getting an error from Flash Builder that is stopping me building my app. I am running the plugin version under Springsource ToolSuite 2.6.1. It worked fine with the Prerelease version of Flash Builder 4.5.
I have flexunit-uilistener-4.1.0-8-4.1.0.16076.swc in the directory along with the other FlexUnit swc files (which do not throw errors).
Any suggestions ?
Thanks!
eclipse.buildId=2.6.1.201105041000-RELEASE
java.version=1.6.0_24
java.vendor=Apple Inc.
BootLoader constants: OS=macosx, ARCH=x86, WS=cocoa, NL=en_US
Framework arguments: -product com.springsource.sts.ide -product com.springsource.sts.ide -keyring /Users/Dre/.eclipse_keyring -showlocation
Command-line arguments: -os macosx -ws cocoa -arch x86 -product com.springsource.sts.ide -data /Users/Dre/workspace-PGS -product com.springsource.sts.ide -keyring /Users/Dre/.eclipse_keyring -showlocation
Error
Fri May 27 21:31:07 PDT 2011
Design view: Failed to load library.swf from /Users/Dre/flexunit-3/flexunit-uilistener-4.1.0-8-4.1.0.16076.swc, reason=DesignAssetLoader.CompleteTimeout

I did a workaround by adding this compiler argument:
${flexlib}/libs/automation/automation_agent.swc
...which points to that file in Flex 4.5. I can now build the app.
Why do I need to do this now when I didn't need to do so before ?

Fatal Error: Failed to load library 'pdh.dll.'

When I double click on the Skype icon, a dialogue box pops up. It says "Fatal Error" at the top, and inside, it says, "Failed to load library 'pdh.dll.'" I cannot get Skype to open at all.
I had used Skype with no problems the day before, and I didn't do anything to any files or anything. I don't think.
I have restarted my computer, un-installed and reinstalled Skype, and went into %appdata% and renamed the Skype folder, tried to open Skype, then renamed the folder back again. None of this worked.
I ran a Malware scan and it came back clean. I am currently running a virus scan.
Can anyone help me?
Solved!
Go to Solution.

See this case:
http://community.skype.com/t5/Windows-archive/Skype-crashes-with-Adobe-Reader-XI/m-p/1557574/highlig...
Have you recently updated your Adobe Reader application?

Merge Library Fails - Claims Duplicate Library

Similar Messages

Maybe you are looking for