Merge pdf files in preview

I must be missing something. I've read the instructions for merging pdf documents in Preview, but it's just not working. Wants me to "duplicate" a file or something. This seems very un-Mac-like. I get 2 documents open, drag the thumbnails from one into another, one at a time, and then try to "Save As". Can anyone tell me what I might be doing wrong? I'm using Lion.
TIA!

This is because of the new versioning.
As I recall this is what I did.
Start with a new, blank preview page and then drag the other pdfs onto the blank form.
I am not sure how I created the new blank page. I may have created it with Adobe first.
It seems that one cannot use Preview alone to open a new blank pdf.
Now when you click Save you should be asked for a new name.
Otherwise, I think that preview will overwrite one of the other pdf files with the new files.
It's a bit confusing - I suggest experimenting with a few "scrap" pdf files first.
I wish Apple would put back the old "Save as" function. It is so much clearer and intuitive than the current scheme where often one has to search for the location of the file once it goes away.

Similar Messages

Merging PDF Files in Preview 5 in OS X v10.7 Lion

I recently updated to the OSX v10.7 Lion operating system. In the previous version I had, I was able to merge two or more PDF files in Preview just by dragging the thumbnail. However, in the Lion version, it is not allowing to drag one PDF file into another. It just opens them as different files in the same preview window. I need to know if someone can help me figure out how to merge these files 'cause I can't send ten different PDF files to my client. Thank you so much for any help you can provide.

Use 'Automator (applications > automator.app).
Choose 'Workflow'.
Type 'get specified finder' in the little search box.
From the list drag 'get specified finder files' into the the panel on the right. Click 'options' and check 'Show this action when the workflow runs'.
Next type 'combine pdf' in the search box, and drag 'Combine pdf pages' into the panel on the right underneath the previous one.
Save the workflow to your apps folder.
Whenever you want to merge any pdfs, click on the workflow. Add the pdfs to the dialogue box, click 'Run' in the top left of Automator. To find the resulting merged pdf, click 'Results'.
This is no doubt a clumsy way of doing it, but it works.

How to merge pdf files in Preview in Lion

I've consulted Preview Help to find out how to merge many pdf files into one. The Help window tells me to open each file, and transfer the thumbnail from each opened document into the sidebar of the other. Who wrote this Help item? Once you drag one thumbnail into the other sidebar, the other window closes, and there's no way to drag the closed file into the other file's sidebar. And I've tried! And tried! A helpful way out is to combine the two files, click Print, then save as PDF. But there must be a more direct way to accomplish this merger. Before Leopard, the procedure was easy. Then in Leopard, Apple made it a little more challenging. Finally in Lion, Apple seems to have surpassed itself, making it almost impossible. Does anyone know how to accomplish this Herculean task in an easy way?

> The Help window tells me to open each file, and transfer the thumbnail from each opened document into the sidebar of the other.
It works the same way it did in SL. That's exactly what I did. Are you sure you are dragging the thumnail? I just dragged a pdf to a file of many pdfs combined and it went right in and joined the family. View menu > Thumbnails?

In Safari how do I open a .PDF file in Preview instead of Adobe Reader?

When a pdf file opens on my computer in Safari, it opens with Adobe Reader (v. 7.0.8). Until recently, I could right-click on my mouse and and a drop-down menu would appear with the option to open the pdf file in Preview instead of Adobe. That option has now disappeared from the drop-down menu. Can anyone explain how to get back the menu option to open the pdf file in Preview? Thanks. David
G4 Cube 1.8ghz/tiPowerbook 800 dvi/iMac (Intel) 20" Mac OS X (10.4.7)

My computer automatically open PDF inside the Safari
window, but I wish it would go back to opening it
externally via Adobe. (maybe we should trade
computers:-)
Anyway, we have the same question.
How do we control whether PDF launches internal to
Safari, or external in Adobe?
This is what I would like to as well. I often have a lot of pdf files I need to open and then save to my hard drive. When I click on a pdf file on a website Safari opens it and then I need to right click in the document to open it with Adobe. How can I get it to open in Adobe the first time without having to right click after it opens in Safari?
Thanks!

Viewing PDF Files in Preview

Since I upgraded to Leopard I am unable to properly view certain pdf files in Preview (Adobe also has some challenges). This is not a consistent problem. Certain pdf files open fine. My graphic designer just sent me a brochure that she created in CS Illustrator and I can see some of the graphical elements, but none of the text. After opening the file I also have to force quit Preview. I had called support a few weeks ago and they instructed me to reboot and reset my parameter rams. This sometimes helps, but shutting my computer down every time doesn't seem to be the best solution to the problem.

Welcome to Apple Discussions!
Preview supports only the open source PDF standard.
Adobe Acrobat Reader the latest version supports almost all PDF files, unless you don't install custom fonts that certain people sometimes add to their PDF.
They should be careful not to do that, as not everyone has the same font library.

How to merge pdf files into one pdf file?

In E-Rec we need the capability to mass printing for correspondance. There i want to merge pdf files for candidates into one pdf file. I am doing the following:
Data: lv_document1           TYPE rcf_s_cs_document_content.
LOOP AT activity_object_tab INTO ls_activity_object.
    lo_act_corr ?= ls_activity_object-activity.
     CALL METHOD lo_act_corr->process_document
       EXPORTING
         channel = 'FRONTEND'
       IMPORTING
         document = lv_document1.
ENDLOOP.
Now lv_document1 contains the pdf file in lv_document1-DOCUMENT_X which is of type RAWSTRING.
This works for one candidate, in this case the pdf for last candidate will be displayed.
But how would i append in the loop or what would i need to do display all candidates in one pdf.
Any help will be appreciated.
Thanks

File>Create PDF>From File.
Please post followups in the Acrobat forum.
Bob

Issue saving edited pdf file on preview

Hi
I opened a 5 page page pdf file on preview and just wanted to save the last page and delet the others. When I am done, I am not able to save, or save as or cancel. When I click on save as a page for save as came on but disapeared without i could change the folder name and then it frooze.
Thanks for your help.

First, you need an app capable of reading PDFs but that's not the issue you should be addressing. You cannot upload PDFs to job sites using Safari. Safari allow this ONLY for videos and pictures.
To do what you're asking, others have suggested using an alternative iOS browser called iCab Mobile or iUploader (iTunes links). Both should help you.

Automatically bring up pdf files in Preview (or at least Safari)

Ideally, I would like the ability to click on a pdf file in Safari and have it automatically bring it up in Preview. I believe you need a plug-in for that and it looks like that doesn't exist (or does it). Assuming that's the case, I would settle for bringing up the pdf in Safari and then doing a ctrl-click to open with Preview. Right now opening a pdf in Safari opens a separate little window which takes more than a few seconds. It used to open up in Safari, but in all my messing around trying to figure this out, that stopped working and I can't figure out how to make it do that again.
Here's my situation and what I've tried so far. First, I have an Intel Mac and don't want to run under Rosetta for performance reasons (things take twice as long!), so Adobe, Shubert's plug-ins, etc. won't work. Adobe is too slow anyways, but I kinda like Shubert's. I've set my default pdf reader for all pdf files to Preview. I've tried turning Adobe's option to use it as the default browser plug-in on and off. I've reinstalled Adobe, removed it and reinstalled it again. I've removed the Adobe plug-in from the Library/Internet Plug-Ins folder and put it back again.
I've tried making this work with every conceivable combination of the above with no luck. Like I said, if I could just get back to having a pdf open in the Safari browser, I could make it work from there to open Preview. But if there's any way to open Preview directly from opening a pdf in Safari, that would be the bomb. Or if anyone knows of any other good pdf browser plug-ins that work with Intel based Macs running safari natively, that would be acceptable too. Spent many hours researching this on the boards as well as trying stuff. Hopefully someone can steer me correctly. Thanks.
MacBook Pro 2.16Ghz 2GB memory 100GB 7200 HD 60GB Photo iPod Mac OS X (10.4.8)

Well Starman, I did everything you said to do to reinstall Safari and it still brings up that separate little window as opposed to bringing up the pdf in the browser. The Software Update didn't do anything after reinstalling Safari, so I reinstalled 10.4.8. Still no luck with the pdf.
One interesting thing I tried is that I set Safari so it would run using Rosetta and then set Adobe Acrobat to use the plug-in. When I brought up a pdf, it used the Adobe plug-in, but it still brought it up in a separate window and not within the browser. When running under Rosetta without the Adobe Plug-In turned on, it brought the pdf up in the separate little window again, but not the Adobe Plug-In - similar to when not running under Rosetta.
Now a few days ago I did download the Shubert Plug-In and turned Rosetta on so I could check it out. It brought up that plug-in in that little window. Now I'm not sure of this, but I think that was the first time that little window came up and I haven't been able to get rid of it since. I trashed the Shubert Plug-In, but could it be possible that something from that is hanging out there causing this problem? Or?

Editing pdf files in Preview painfully SLOW with mavericks! Why? How to fix?

Editing pdf files in Preview is painfully SLOW with Mavericks! With mountain lion everything was so smooth .... Why? How can I fix this?

I stopped using preview. Adobe Acrobat Pro is running fine ... this is not a solution to the problem though. The question remains open: why is preview not running as before?
Why did I upgrade?!

HT2506 hi i can't seem to copy and paste pdf files from preview to a microsoft word document. it always comes up with nonsense characters in the word document. how do i fix this? thanks in advance

hi i can't seem to copy and paste pdf files from preview to a microsoft word document. it always comes up with nonsense characters in the word document. how do i fix this? thanks in advance

Hi,
The quickest way to do this (tested with OS 10.8.2, MS Word 2011) is in one line:
tell application "Microsoft Word" to close every document whose name begins with "book"
The reason why your script doesn't work is that you aren't specifying to Word which document you want it to close.
So, changing one line ought to do it:
close document incrementvalue -- instead of "close document"
But... when you close a document, you change the document count. Document 2 becomes document 1, document 3 becomes document 2 etc. So eventually you'd get a message saying "The object you are trying to access doesn't exist".
Because of this, if you want to do it in a repeat loop, you have to work backwards:
tell application "Microsoft Word"
set doc_count to count documents
repeat with x from doc_count to 1 by -1
if name of document x begins with "book" then close document x
end repeat
end tell
Hope this helps.

Problem in Merging PDF files

Need to print batches of PDF. The command copy *.PDF > LPT1: (redirected by NET USE) doesn't work. On the printer I get an error message. All files are sent in one file. . I guess this is related to the PDF header which is not set correctly for the second PDF copied. I mean, according to the PDF Reference guide, the proper syntax for a PDF file header is for the "%PDF-<version>" comment to be the first line of the PDF file. The recommended second line is a comment line with four binary characters to indicate the file contains binary information. . Acrobat requires only that the header appears somewhere within the first 1024 bytes of the file. . I guess the Rip is not able to convert PDF into PS before its interpretation as the second header exceeds 1024. Even the combined file has %%EOF before each PDF Header, this is probably not enough to merge them without problem. . Did you experience the same ? Thanks for your comments. Regards. Franck

You can build your own PDF merge utility using the PDF Merge and split libraries for .NET from from http://www.dotnet-reporting.com or http://www.winnovative-software.com .
You can use it to merge PDF files, html files, text files and images,
set the page orientation, compression level and page size.
All this can be accomplished with only a few lines of code:
PdfDocumentOptions pdfDocumentOptions = new PdfDocumentOptions();
pdfDocumentOptions.PdfCompressionLevel = PDFCompressionLevel.Normal;
pdfDocumentOptions.PdfPageSize = PdfPageSize.A4; pdfDocumentOptions.PdfPageOrientation = PDFPageOrientation.Portrait;
PDFMerge pdfMerge = new PDFMerge(pdfDocumentOptions);
pdfMerge.AppendPDFFile(pdfFilePath);
pdfMerge.AppendImageFile(imageFilePath);
pdfMerge.AppendTextFile(textFilePath);
pdfMerge.AppendEmptyPage();
pdfMerge.AppendHTMLFile(htmlFilePath);
pdfMerge.SaveMergedPDFToFile(outFile);

Do you know how to make multible page PDF files in Preview?

MAKE MULTIPLE PDF DOCUMENTS IN PREVIEW
Drop first page PDF file into Preview icon on the dock
Drag 2nd, 3rd page into page area
Select print then save as PDF
Save to desktop with new name.
Drag new file to Preview then press share to email
SCAN IN PREVIEW
In Preview go to FILE
Select IMPORT FROM PRINTER
Select Scan
Press CONTROL and DUPLICATE in the edit menu for SAVE AS to name file

Go to the Map, Background & Animatic Browser (last button in the centre tool bar alongside the Transition button). Drag the Black background (or any background) to your project. From an Event, drag the video selection directly onto the Black clip in the project. As you drop the video clip, a pop-up menu will appear. Select Picture in Picture.
Your video will appear as a small picture within the black clip. Click on it and reposition it to the centre of the viewer, using the yellow guide lines to get the exact centre position. Resize the Picture in Picture if desired by dragging the corner handles.
NOTE: You may need to extend the duration of the Black clip to match the duration of the video clip. Double-click on the Black clip to open the Inspector, then adjust the duration there.
John
Message was edited by: John Cogdell - added NOTE

Mountain Lion freezes when opening pdf file on preview

Mountain Lion freezes when opening pdf file on preview. I have to power down my Mac

Mountain Lion freezes when opening pdf file on preview. I have to power down my Mac

Merge PDF files into (preserving layer info)

Is it possible to combine several PDF files into one and preserve the layers of each source PDF into the merged one ?

... not sure SSIS is the correct tool for you unless you're already using it or have other tasks to perform besides merging pdf files.
There is no functionality like that available out of the box, but if you have the right (third party) .Net assemblies then you could use SSIS (Script Task/Component). An other option is to call a tool/batch file via the execute process task.
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

Merging PDF files through a script

Hi everyone,
I want to merge a couple of PDF files
through a script, because i have to do
it for a good number of them every time
I get them sent.
I was wondering, does Reader have a
command that can be called in the command
line in order to merge this pdf files through
a script.
Ted.

Reader can do very few things besides being a reader. If you wanna merge PDF files, use a PDF merger.

Merge pdf files in preview

Similar Messages

Maybe you are looking for