Merge same table quiry

i have table
like.
table 1
A | B
1 | c
2 | d
table 2
A | B
3 | e
4 | f
where A,B column Name
I want to merge them Like
A | B
1 | c
2 | d
3 | e
4 | f
how it is possible ??
plz help me ..
Sms

it is possible if i add table 3
SELECT A, B
FROM Table1
UNION ALL
SELECT A, B
FROM Table2UNION ALL
SELECT A, B
FROM Table3
Sms

Similar Messages

Update Rows with info from other Rows in Same Table.

I'm trying to update rows with information from the same table. The table gets loaded with info from a report that runs and it has to be a new entry every month but I would like to carry over some of the info from last month. This statement below runs but updates all rows in the new table load and in my test cases I only made a few match so only like 5 records should get updated. This is an example of what I'm trying to do. If I add this(C2.COL_INVC_ID = C1.COL_INVC_ID) to the last "*Where*" statement I get an invalid identifier for "C2.COL_INVC_ID". So what am I doing wrong here??? How can I update only the rows that where also in last months run???
Thanks in advance for any help!
Update OpenIssues OI1
Set(OI1.Num, OI1.Status, OI1.Code, OI1.LastModifiedDate) =
(Select OI2.Num, OI2.Status, OI2.Code, OI2.LastModifiedDate
From OpenIssues OI2
Where OI2.num = OI1.num and OI2.TableLoadDate = TO_DATE('01/31/2012 00:00:00', 'MM/DD/YYYY HH24:MI:SS')
Where and OI1.TableLoadDate = TO_DATE('02/29/2012 00:00:00', 'MM/DD/YYYY HH24:MI:SS')
SQLMe

Hi,
Welcome to the forum!
SQLMe wrote:
I'm trying to update rows with information from the same table. The table gets loaded with info from a report that runs and it has to be a new entry every month but I would like to carry over some of the info from last month. This statement below runs but updates all rows in the new table load and in my test cases I only made a few match so only like 5 records should get updated. This is an example of what I'm trying to do. If I add this(C2.COL_INVC_ID = C1.COL_INVC_ID) to the last "*Where*" statement I get an invalid identifier for "C2.COL_INVC_ID". If the aliases c1 and c2 aren't defined anywhere, then you can't use them anywhere.
The WHERE clause of the UPDATE statement can only reference the table being updated, ot1 in this case.
So what am I doing wrong here??? How can I update only the rows that where also in last months run???
Thanks in advance for any help!
Update OpenIssues OI1
Set(OI1.Num, OI1.Status, OI1.Code, OI1.LastModifiedDate) =
(Select OI2.Num, OI2.Status, OI2.Code, OI2.LastModifiedDate
From OpenIssues OI2
Where OI2.num = OI1.num and OI2.TableLoadDate = TO_DATE('01/31/2012 00:00:00', 'MM/DD/YYYY HH24:MI:SS')
Where and OI1.TableLoadDate = TO_DATE('02/29/2012 00:00:00', 'MM/DD/YYYY HH24:MI:SS')
------------There's a syntax error in the last line. Either something got lost when you posted the code, or you just don't want the keyword AND. You certainly don't want AND immediately after WHERE.
In general, if it's not obvious how to do an UPDATE, then UPDATE is the wrong tool: you want MERGE instead.
Whenever you have a problem, please post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) from all tables involved.
Also post the results you want from that data, and an explanation of how you get those results from that data, with specific examples.
Simplify the problem as much as possible. Remove all tables and columns that play no role in this problem.
If you're asking about a DML statement, such as UPDATE, the CREATE TABLE and INSERT statements should re-create the tables as they are before the DML, and the results will be the contents of the changed table(s) when everything is finished.
Always say which version of Oracle you're using.
See the forum FAQ {message:id=9360002}

How to populate data in the same table based on different links/buttons

Hi
I'm using jdeveloper 11.1.4. I have a use case in which i need to populate data in the same table based on click of different links.
Can anyone please suggest how can this be achieved.
Thanks

I have a use case in which i need to populate data in the same table based on click of different linksDo you mean that you need to edit existing rows ?
What format do you have the date in - table / form ?

Data of column datatype CLOB is moved to other columns of the same table

Hi all,
I have an issue with the tables having a CLOB datatype field.
When executing a simple query on a table with a column of type CLOB it returns error [POL-2403] value too large for column.
SQL> desc od_stock_nbcst_notes;
Name Null? Type
OD_STOCKID N NUMBER
NBC_SERVICETYPE N VARCHAR(40)
LANGUAGECODE N VARCHAR(8)
AU_USERIDINS Y NUMBER
INSERTDATE Y DATE
AU_USERIDUPD Y NUMBER
MODIFYDATE Y DATE
VERSION Y SMALLINT(4)
DBUSERINS Y VARCHAR(120)
DBUSERUPD Y VARCHAR(120)
TEXT Y CLOB(2000000000)
NBC_PROVIDERCODE N VARCHAR(40)
SQL> select * from od_stock_nbcst_notes;
[POL-2403] value too large for column
Checking deeply, some of the rows have got the data of the CLOB column moved in another column of the table.
When doing select length(nbc_providercode) the length is bigger than the datatype of the field (varchar(40)).
When doing substr(nbc_providercode,1,40) to see the content of the field, a portion of the Clob data is retrieved.
SQL> select max(length(nbc_providercode)) from od_stock_nbcst_notes;
MAX(LENGTH(NBC_PROVIDERCODE))
162
Choosing one random record, this is the stored information.
SQL> select length(nbc_providerCode), text from od_stock_nbcst_notes where length(nbc_providerCode)=52;
LENGTH(NBC_PROVIDERCODE) | TEXT
-------------------------+-----------
52 | poucos me
SQL> select nbc_providerCode from od_stock_nbcst_notes where length(nbc_providerCode)=52;
[POL-2403] value too large for column
SQL> select substr(nbc_providercode,1,40) from od_stock_nbcst_notes where length(nbc_providercode)=52 ;
SUBSTR(NBC_PROVIDERCODE
Aproveite e deixe o seu carro no parque
The content of the field is part of the content of the field text (datatype CLOB, containts an XML)!!!
The right content of the field must be 'MTS' (retrieved from Central DB).
The CLOB is being inserted into the Central DB, not into the Client ODB. Data is synchronized from CDB to ODB and the data is reaching the client in a wrong way.
The issue can be recreated all the time in the same DB, but between different users the "corrupted" records are different.
Any idea?

939569 wrote:
Hello,
I am using Oracle 11.2, I would like to use SQL to update one column based on values of other rows at the same table. Here are the details:
create table TB_test (myId number(4), crtTs date, updTs date);
insert into tb_test(1, to_date('20110101', 'yyyymmdd'), null);
insert into tb_test(1, to_date('20110201', 'yyyymmdd'), null);
insert into tb_test(1, to_date('20110301', 'yyyymmdd'), null);
insert into tb_test(2, to_date('20110901', 'yyyymmdd'), null);
insert into tb_test(2, to_date('20110902', 'yyyymmdd'), null);
After running the SQL, I would like have the following result:
1, 20110101, 20110201
1, 20110201, 20110301
1, 20110301, null
2, 20110901, 20110902
2, 20110902, null
Thanks for your suggestion.How do I ask a question on the forums?
SQL and PL/SQL FAQ

Copy values from a filed to another in different blocks in same table

Hi All,
How to copy value from a filed to another field in different blocks in same form ?
example if i change value in Field A of block 1 it should reflect in Field B block 2 and again if i change in Field B block 2 it should reflect in Field A of block 1.
values will change twice or thrice then it will not change. It is happening like that.
how to do this ?
Regards

Same table / different blocks
I guess, both blocks will be marked for update, and when your user presses commit, the same table will be updated twice!
Are you sure that this is what you want to do? Is the same record current in both blocks? If so, you better use 1 block (it can be spread over several canvases and windows) and synchronize the items with the "synchronize item" property.
Anyway: If you can't apply the synchronize-property bcos the items are in different blocks, you can synchronize with 2 when-validate-item triggers.
Wolfram

Report with multiple COUNT columns with counts from same table

I am new to discoverer so I am a bit lost.
I am working to create a report to show usage data from the eBusiness Knowledge Base. I have the query written in SQL using subqueries that is in the format:
Solution Number | Soultion Title | Solution Views | Positive Feedback | Negative Feedback
12345 ___________ Title ________ 345 ____________ 98 _______________ 34
The 'Views', 'Positive' and 'Negative' entries are stored in the same table so i am doing a count where setid=setid and usedtype=VS, then counting where usedtype=PF and usedtype=NF
In discoverer I can get the solution number, title and ONE of the totals but I can't seem to figure out how to get a COUNT for three different things from the same table in columns on the same row.
When I go to edit sheet -> select items once I select the COUNT option for the UsedType column in the table CS_KB_SET_USED_HISTS I can't select it again. I also have found now way to add a column based on an entered query.
If anyone could help it would be much appreciated.
Thanks
Edited by: Toolman21 on Dec 2, 2010 2:17 PM
added ______ to correct spacing.

Hi,
You can separate the column by using a case or decode.
for example create 2 calculations:
case
when usedtype='PF'
then <you original column> --- the one contain them both
else 0
end
case
when usedtype='NF'
then <you original column> --- the one contain them both
else 0
end
after that you can create the count aggregation over those.
Tamir

Submitting multiple job on teh same table via trigger

Hi All,
I have a trigger that run multiple jobs using dbms_job on the same table. I am trying to refresh two materialized views complete via dbms_job.
Issue is when data is inserted into NET_CAB table , the trigger kicks off the bothe procedures but only the first materialized view is refreshed and not the other one.
Attached is the trigger, the procedure and materialized view
<pre>
create or replace
TRIGGER NET_CAB_TRG
AFTER INSERT OR UPDATE OR DELETE ON NET_CAB
DECLARE
pbl NUMBER;
pbl1 number;
BEGIN
SYS.DBMS_JOB.SUBMIT( JOB => pbl,what => 'P_CAB_PROC;' ) ;
SYS.DBMS_JOB.SUBMIT( JOB => pbl1,what => 'P_CABAS_PROC;') ;
END;
</pre>
<pre>
create or replace
procedure P_CAB_PROC
is
BEGIN
dbms_mview.REFRESH('P_CAB','C');
COMMIT;
END;
</pre>
<pre>
create or replace
procedure P_CABAS_PROC
is
BEGIN
dbms_mview.REFRESH('P_CABAS','C');
COMMIT;
END;
</pre>
<pre>
CREATE MATERIALIZED VIEW P_CAB
BUILD DEFERRED
USING INDEX
REFRESH COMPLETE ON DEMAND
USING DEFAULT LOCAL ROLLBACK SEGMENT
DISABLE QUERY REWRITE
AS
SELECT
seq_nextval AS ID,
NAME,
SEGMENT_ID,
reproject(geometry) AS GEOMETRY
FROM NET_CAB
where sdo_geom.validate_geometry(geometry,0.005) = 'TRUE'
</pre>
<pre>
CREATE MATERIALIZED VIEW P_CABAS
BUILD DEFERRED
USING INDEX
REFRESH COMPLETE ON DEMAND
USING DEFAULT LOCAL ROLLBACK SEGMENT
DISABLE QUERY REWRITE
AS
SELECT
seq_nextval AS ID,
NAME,
SEGMENT_ID,
reproject(geometry) AS GEOMETRY
FROM NET_CAB
where sdo_geom.validate_geometry(geometry,0.005) = 'TRUE'
AND cis > 4;
</pre>
Edited by: CrackerJack on May 22, 2012 8:58 PM

I can run many procedures in a job:
BEGIN
SYS.DBMS_SCHEDULER.CREATE_JOB
       job_name        => 'JOB_REPORT_FPD'
      ,start_date      => TO_TIMESTAMP_TZ('2012/05/31 23:30:00.000000 +07:00','yyyy/mm/dd hh24:mi:ss.ff tzh:tzm')
      ,repeat_interval => 'FREQ=MONTHLY;BYMONTHDAY=-1'
      ,end_date        => NULL
      ,job_class       => 'DEFAULT_JOB_CLASS'
      ,job_type        => 'PLSQL_BLOCK'
      ,job_action      => '
        DECLARE
        BEGIN
            ibox_file.fpd_nbot_report;
            ibox_file.fpd_nbot_report(''NBOT'');
            ibox_file.order_report;
            COMMIT;
        EXCEPTION
          WHEN OTHERS THEN ROLLBACK;
        END;
      ,comments        => 'USED FOR REPORTING FPD'
SYS.DBMS_SCHEDULER.SET_ATTRIBUTE
    ( name      => 'JOB_REPORT_FPD'
     ,attribute => 'RESTARTABLE'
     ,value     => FALSE);
SYS.DBMS_SCHEDULER.SET_ATTRIBUTE
    ( name      => 'JOB_REPORT_FPD'
     ,attribute => 'LOGGING_LEVEL'
     ,value     => SYS.DBMS_SCHEDULER.LOGGING_RUNS);
SYS.DBMS_SCHEDULER.SET_ATTRIBUTE_NULL
    ( name      => 'JOB_REPORT_FPD'
     ,attribute => 'MAX_FAILURES');
SYS.DBMS_SCHEDULER.SET_ATTRIBUTE_NULL
    ( name      => 'JOB_REPORT_FPD'
     ,attribute => 'MAX_RUNS');
BEGIN
    SYS.DBMS_SCHEDULER.SET_ATTRIBUTE
      ( name      => 'JOB_REPORT_FPD'
       ,attribute => 'STOP_ON_WINDOW_CLOSE'
       ,value     => FALSE);
EXCEPTION
    -- could fail if program is of type EXECUTABLE...
    WHEN OTHERS THEN
      NULL;
END;
SYS.DBMS_SCHEDULER.SET_ATTRIBUTE
    ( name      => 'JOB_REPORT_FPD'
     ,attribute => 'JOB_PRIORITY'
     ,value     => 3);
SYS.DBMS_SCHEDULER.SET_ATTRIBUTE_NULL
    ( name      => 'JOB_REPORT_FPD'
     ,attribute => 'SCHEDULE_LIMIT');
SYS.DBMS_SCHEDULER.SET_ATTRIBUTE
    ( name      => 'JOB_REPORT_FPD'
     ,attribute => 'AUTO_DROP'
     ,value     => FALSE);
SYS.DBMS_SCHEDULER.ENABLE
    (name                  => 'JOB_REPORT_FPD');
END;
/

How do I sum across the same table in multiple sheets?

So I'm trying to figure out an annoying problem.
I have a largish (100's) amount of data with each collection being a table in a sheet, one sheet per data collection. This means I have 100's of sheets, each with the same table name and layout. Each sheet has several hundred data points in it.
How do I do a sum across all of the same table in all the sheets?
For example I want to do Sum('Data Sheet Number *'::'Table 1'::A1) to get a sum of everything in all the A1 cells of all the sheets named 'Data Sheet Number ' followed by anything (I'm using the star in the same way one would do it in a shell...)
Thanks!
Message was edited by: unusedusername
Message was edited by: unusedusername

To respond to WWJD: I was handed the data and I don't have any control over it's format...
I found the answer in the forums though, so I guess I'm answering my own question
http://discussions.apple.com/thread.jspa?messageID=6203991&#6203991
The auto-filling INDIRECT reference worked very well for me.

Multiple and conditions in the same table

Ok I am going to kick myself for this, but I can't figure it out. I am trying to figure out how to find employees which match multiple criteria in the same table.
create table emp
(empno number,
name varchar2(10))
create table skills
(skill_id   number,
skill_code varchar2(20))
create table emp_skills
(empno    number,
skill_id number,
rating   number)
insert into emp values(1, 'SMITH');
insert into emp values(2, 'JONES');
insert into skills values (1, 'SQL');
insert into skills values (2, 'PLSQL');
insert into skills values (3, 'JAVA');
insert into emp_skills values(1,1, 8);
insert into emp_skills values(1,2, 9);
insert into emp_skills values(1,3, 10);
insert into emp_skills values(2,1,9);
insert into emp_skills values(2,2,2);
insert into emp_skills values(2,3,7);Now I need to come up with a query finding all employees who match all 3 of the following criteria:
1) Have at least a 5 rating in SQL
2) Have at least a 6 rating in PLSQL
3) Have at least a 7 rating in JAVA
So using this I would expect to return only SMITH since his/her skills meet all 3 criteria. I dont want to use OR in my query since I want all 3 to match not just one of them.
I have a feeling I will need to self join the table - but this is going to be part of a dynamic query for APEX where the users can choose the skills and ratings they want employees to adhere to, so I dont know the number of criteria or the exact criteria in advance. But I figure if I can get a proof of concept SQL I can make it work dynamically.
Any ideas are appreciated - sorry for the long post but I figure more detail is better

with es1 as(
select s.skill_code, es.empno, es.rating
from skills s, emp_skills es
where s.skill_id = es.skill_id
/* main */
select e.*
from emp e
where
exists
(select 'x' from es1
where es1.rating >= 5
and es1.skill_code = 'SQL'
and es1.empno = e.empno)
and
exists
(select 'x' from es1
where es1.rating >= 6
and es1.skill_code = 'PLSQL'
and es1.empno = e.empno)
and
exists
(select 'x' from es1
where es1.rating >= 7
and es1.skill_code = 'JAVA'
and es1.empno = e.empno)
-- Addition (Another example)
with es1 as(
select s.skill_code, es.empno, es.rating
from skills s, emp_skills es
where s.skill_id = es.skill_id
/* main */
select e.*
from emp e
where
(select count(distinct es1.skill_code) from es1
where
((es1.rating >= 5 and es1.skill_code = 'SQL')
or
(es1.rating >= 6 and es1.skill_code = 'PLSQL')
or
(es1.rating >= 7 and es1.skill_code = 'JAVA')
and es1.empno = e.empno)
=3;

How can I align two different text row in the same table in two different way (one centered and the other one on the left)?

Hi,
I want to center two different text row that are in the same table but one on the center and the other one on the left. I put a <span> tag hoping that it has been overwhelmed the table's class properties The .bottomsel's font-family and the .Cig84's font-family and colour work but the text-align don't: they're both on the left.
These are my source and CSS codes:
Source:
<table width="600" border="0">
<tr>
    <td class="bottomref"><p><span class="bottomsel">| <a href="index.html" target="_self">Main</a> | <a href="about.html" target="_self">About</a> | <a href="clients.html" target="_self">Clients</a> | <a href="contact.html" target="_self">Contact</a> |</span><br />
      <span class="credits">Credits: <span class="Cig84">Cig84</span></span></p></td>
</tr>
</table>
CSS:
.bottomsel {
text-align: center;
font-family: Georgia, "Times New Roman", Times, serif;
.credits {
text-align: left;
.Cig84 {
color: #F00;
font-family: "Comic Sans MS", cursive;

Use paragraph tags with CSS classes.
CSS:
     .center {text-align:center}
     .left {text-align:left}
HTML:
<table width="600" border="0">
<tr>
    <td class="bottomref">
          <p class="center">This text is center aligned</p>
          <p class="left">This text is left aligned</p>
    </td>
</tr>
</table>
Nancy O.

How to CREATE VIEW to merge two tables each of which has CLOB-typed column

I failed in creating a view to merge two tables that have CLOB-type column each.
The details are:
Database: Oracle 9i (9.2.0)
Two tables "test" and "test_bak", each of which has the following structure:
ID Number(10, 0)
DUMMY VARCHAR2(20)
DUMMYCLOB CLOB
The following operation fails:
create view dummyview (id, dummy, dummyclob) as
select id, dummy, dummyclob from test
union
select id, dummy, dummyclob from test_bak;
I was announced:
select test.id, test.dummy, test.dummyclob
ERROR in line 2:
ORA-00932: inconsistent data type: required - , but CLOB presented.
But if creating views from only ONE table with CLOB-type columns, or from two tables WITHOUT CLOB-typed columns, the creation will succeed. The following 1) and 2) will succeed, both:
1) one table, with CLOB-typed column
create view dummyview (id, dummy, dummyclob) as
select id, dummy, dummyclob from test;
2) two tables, without CLOB-typed columns
create view dummyview (id, dummy) as
select id, dummy from test
union
select id, dummy from test_bak;
I want to merge the two tables all, with complete columns, how to write the CREATE VIEW SQL statement?
many thanks in advance

Dong Wenyu,
No.
But you could do this:
SELECT source.*, nvl (tab1.clob_column, tab2.clob_column)
FROM your_table1 tab1, your_table2 tab2, (
SELECT primary_key, ...
FROM your_table1
UNION
SELECT primary_key, ...
FROM your_table2
) source
WHERE source.primary_key = tab1.id (+)
AND source.primary_key = tab2.id (+)
In other words, do the set operation (UNION (ALL)/INTERSECT/MINUS) on just the PK columns before pulling in the LOB columns.
d.

How to read the hierarchy data from the same table using loop in AMDP method

Hi All,
We have a requirement to get the top partner from BUT050 table.
Here the Top parent is nothing but the top most in the hierarchy of the partners from BUT050.
Example:
For partner 1234 (BUT050-PARTNER1) there is partner 3523(BUT050-PARTNER2) one level above
For partner 3523(BUT050-PARTNER1) there is partner 4544 (BUT050-PARTNER2) last level .
so in this case for the partner 1234 the Top parent is 4544 .
I have created AMDP Procedure method to get the top-parnet and below given is the logic implemented in AMDP method.
Here i have implemented a recursive logic with the WHILE loop to get the top most hierarchy partner from the same table BUT050
IV_Parent is the input partner and ev_top_parent is the output value.
AMDP Procedure Method:
    DECLARE lv_date VARCHAR(8) := TO_VARCHAR (current_date, 'YYYYMMDD');
    DECLARE found INT := 1;
          iv_partner1 = SELECT partner1 FROM but050
                          WHERE partner2 = iv_partner
                          AND reltyp = :iv_hierarchy
                          AND date_to >= :lv_date
                          AND date_from <= :lv_date;
     WHILE found <> 0 do
       select partner1 into ev_top_parent from :iv_partner1;
                       iv_partner1 = SELECT partner1 FROM but050
                       WHERE partner2 in ( select partner1 from :iv_partner1 where partner1 is not null)
                       AND reltyp = 'ZBP004'
                       AND date_to >= :lv_date
                       AND date_from <= :lv_date;
       select COUNT ( partner1 ) INTO found FROM :IV_PARTNER1;
    END WHILE;
This method is working fine, but here it is only taking one single partner and getting the top parent as output.
Now i would like to convert this mehtod so as to accept n number of partners (not one single partner) as input and should process each partner to get the top parent.
Could anyone guide me how can i handle the given AMDP method further so as to work some how it is within another loop from other AMDP method.
Thanks.
Regards,
Laxman.P

Hi
Go to SE11 and enter the hierarchy table name.
/BIC/H....(infoobject name)...and execute the table and select table entry and delete all....
Thanks
TG

Load Data from a table on one server's database, to the same table structure in multiple server databases

Hi,
I have a situation where i have to load data from one server/database table to multiple servers/databases.
Example:
I need to load data from dbo.TABLE_A (on Server: Server_A & Database: Database_A) to the same table on the list of server databases like
Server: Server_B , Database: Database_B
Server: Server_C , Database: Database_C
Server: Server_D , Database: Database_D
Server: Server_E , Database: Database_E
Server: Server_F , Database: Database_F
Server: Server_G , Database: Database_G
Server: Server_H , Database: Database_H
so on and so forth on 250 such server database combinations.
The table structure is the same on all the servers.
If i make the source or destination dynamic, it throws an error while mapping ?
I cannot get Linked server permissions and SQL Server Config thing doesn't work as well.
Please suggest on how to load data from one source to multiple server/databases.
Thank you.

I just need to transfer one table's data. its like i have to use a query to pick data for
the most recent data. So i use something like, select A, B, C, D from dbo.table where ETL_TIMESTAMP > (the max(etltimestamp) in the destination on different server). There are no foreign key relationships and the data should not be truncated. it just had
to append the new records.

Two LOVs in same UIX page based on the same table

Hi group,
Recently I ran into a problem with a UIX page that has two LOVs based on the same database table. In Emp and Job terminology, here's what I tried to do.
Suppose we have use the Employees and Jobs tables from the HR scheme with one small modification. Add a column called PREFERRED_JOB_ID of type VARCHAR2(10) which is exactly the same as JOB_ID. Hypothetically speaking, this column will be used to allow Employees to select their preferred job in case they want to change their jobs.
Next, create business components in JDeveloper based on the Employees and Jobs table. In order to be able to generate the LOVs for Job and PreferredJob create two ViewObjects, one called JobsLookupView and one called PreferredJobsLookupView. These both need to be based upon the same Jobs EntityObject. Also include the Jobs EntityObject twice in the EmployeesView ViewObject and give one the alias PreferredJobs. Include the JobTitle attributes of Jobs and PreferredJobs in EmployeesView so they can contain the JobTitles selected in our future LOVs.
Next create a ViewController project if it's not already there and enable JHeadstart on it. Create an Application Structure File and create the lookups for the two LOVs. When I run the application I see this happening:
When I click the flashlight icon next to the PreferredJob LOV and select a job, the PreferredJob field is selected in the UIX page but no job title appears. When I next first select the Job LOV and select a new job and then select the PreferredJob LOV again and select a different job, the job that was selected in the Job LOV is now also entered in the PreferredJob field. When I make sure the PreferredJob field isn't required (remove the required="yes" property on the messageLovInput entry for PreferredJobTitle and remove the PreferredJobTitle field from the addRequiredRowItems list in the UIX page) I can save the changes I made in the Employees.uix page. The same JobId is stored in the database for Job and PreferredJob.
This behaviour is probably due to cacheing issues because both LOVs and the EmployeesView ViewObject use one EntityObject for four values in three ViewObjects.
So I then modified my model a bit. I created a new EntityObject called PreferredJobs based on the JOBS table. I modified the EmployeesView ViewObject to use this EntityObject for the PreferredJobTitle attribute and modified the PreferredJobsLookupView to use this EntityObject.
I needed to modify a few things as well in the Application Structure File (which were prompts and whether or not the attribute should be visible in a table) and after regenerating I made sure the PreferredJob attribute isn't required in the UIX page. When I then run the application again, I never see the JobTitle I select in any LOV allthough the PreferredJob field is selected when I select a Job in the PreferredJob LOV. The correct JobId now is stored in the database though.
Has anyone ever encoutered this behaviour? Would anyone know how to get two LOVs based on the same table in one UIX page?
Thanks in advance,
Wouter van Reeven
AMIS

OK I figured it out. When I added the second Lookup ViewObject (PreferredJobs) no additional Association was created. Therefore, ADF BC wasn't able to figure out which field to update. When I added the Association between the PreferredJobs Lookup ViewObject and the Employees ViewObject everything started working ok.
I then recreated my inital situation: one EntityObject for Jobs and one for Employees, now with two Associations between them. After modifying the Employees ViewObject and making sure the Jobs EntityObject was referred twice and via the corresponding Association, everything started working ok.
Greets, Wouter
AMIS

How to import a table which is in mdb file(same table in different mdb's)

Hello,
how to import a table which is in mdb file(same table in different mdb's)
e.g. table 'EMPLOYEE' is in 'test.mdb' the same table 'EMPLOYEE' is in 'current.mdb'
How this can be done on click of a button on my form if the path of mdb is provided?
Thanks

This question is not related with ora dev forms, its about Microsoft Access.
Use import option (File >> Get External Data >> Import)
or use TransferDatabase action.

Merge same table quiry

Similar Messages

Maybe you are looking for