Merge tool.

what photo shop software has the merge paint tool? I have photo shop elements 11,but I can't locate the merge tool.

I know of no »Merge Paint Tool« in Photoshop.
What functionality are you talking about exactly?
Do you mean the Clone Stampl Tool?
For Photoshop Elements questions please refer to the appropriate Forum.
http://forums.adobe.com/community/photoshop_elements

Similar Messages

  • Subversion configure with external Merge Tool?

    I'm using Subversion as my VCS in JDev. I'd like to use Altova's DiffDogg as my Merge Tool in JDev. Is this possible in JDev 10.1.3.1?

    The subversion extension to JDeveloper has its own visual merge tool
    See demo here:
    https://collabnet.webex.com/collabnet/onstage/tool/record/viewrecording1.php?EventID=245412205
    There is no built-in pluggability to this function to replace it - but you can probably just invoke the tool using the tools->external tools to add an option to invoke the command line interface.

  • Diff and Merge tools

    Anyone care to recommend a free diff and merge tool?
    I dl-ed compareandmerge which works nice, but is a limited trial.
    I know there are a ton of diff tools out there but if anyone thinks theirs is particularly good, I'd appreciate hearing about it.
    TIA.

    I like ExamDiff for Windows. It was free last time I downloaded it, but I haven't looked in a while.
    I don't know of any good merge tools, streamy. I'll have to crib what comes back from others.
    %

  • Where is the Object/Merge tool

    I've watched the online video that demonstrates how to change drawing mode of objects in Flash CS4. I tried to locate the Object/Merge tool that's demonstrated on the toolbar in my version of Flash and it's not there. Do I need to make a setting elsewhere to make this tool appear?
    Can anyone suggest a reason why I may be missing a tool? I've attached a screen capture of the toolbar.
    Thanks.
    Grace Daminato

    Never mind - I played around some more and discovered that the Object/Merge tool appears if I select the rectangle (or ellipse) tool instead of the rectangle primitive.
    Thanks you.
    Grace

  • Hairlines between shapes after using the merge tool (Pathfinder)

    Hi all,
    I have this complicated camouflage like design made of all sorts of shapes but only using 5 colours.
    None of my elements have strokes.
    I selected all, and used the merge tool in the pathfinder (because I need to provide the document without any shapes overlapping).
    When you look close at the result you notice that there are white hairlines around every shapes.
    It's really a gap because If I slide a red rectangle behind the artwork, it appears in the hairlines.
    I read the other illustrator "hairlines" topics here but couldn't find a workaround to my problem.
    Thank you all in advance!

    If I untick Preferences>General>Anti-Aliased Artwork?
    The hairlines all magically disappear !
    Does that mean that it was just a screen artefact and they will not print?
    I had saved it as PDF but the lines where still showing in the PDF.
    But in Acrobat Pro if I's uncheck the smooth line art, they would disappear.
    Thank you so much Jacob!!!

  • Link Merge Tool

    I'm trying to learn Pages and have come to a tool that is not described in either the online help or the User's Guide.
    Inspector>Link>Merge
    What does the "merge" tool do and how do you use it?
    Thanks.
    sjh

    Stephen,
    This is from Pages' Help files:
    To create an Address Book field using the Address Book name:
    1. Open a Pages document.
    2. Place the insertion point at the location where you want the Address Book field to appear.
    3. If the Link Inspector isn’t open, choose Insert > Address Book Field. Otherwise, select “Enable as an Address Book field” in the Merge pane of the Link Inspector. A placeholder for the Address Book field is inserted and highlighted.
    4. In the Merge pane of the Link Inspector, open the Type pop-up menu. Choose the category that best describes the kind of data you want inserted into the field.
    5. From the Field pop-up menu, choose the Address Book field name for the data you want to insert into the Address Book field. The placeholder text is replaced by the name you choose.
    6. Click Sender Field or Recipient Field to indicate the kind of Address Book field you want to create.
    -Dennis

  • Using New LabVIEW Merge Tool LVMerge With Tortoise SVN

    Hi,
    I've just posted a new blog article Using New LabVIEW Merge Tool LVMerge With Tortoise SVN to my blog at ExpressionFlow. Check it out!
    Tomi
    Tomi Maila

    The LV merge tool really does become far more powerful when integrated into SVN than when used manually.  Here's an article on Using LVmerge LabVIEW Merge Tool with TortoiseSVN with all the necessary setup instructions for LabView 8.5 and 8.6.
    Jesse

  • How can I programmatically generate report from teststand diff/merge tool?

    Hello,
    I'm currently using TortoiseSVN for change control management of code. A rare, but too common, issue we face is that someone has uncommitted code on their machine.
    We've developed some code to email notify the CORE team when uncommitted code is detected on a machine. We're able to identify which files have modifications, but we're looking to take it a little further and determine what the differences are; preferably between the repository version and local version if you are familiar with SVN.
    I'm familiar with FileDiffer.exe, and have it linked easily to diff files in the TortoiseSVN GUI, but I'm looking for a way to do this and generate a dif report progammatically.
    Does anyone know of a way to launch and programmatically generate a report xml from the TestStand File Diff/Merge tool without use of the GUI? Or if there is another tool or method out there capable of diffing sequences, please give suggestions.

    I'm looking into the same for LabVIEW files... I've come up with the following options but have not identified a concrete way to generate a comparison report so far.
    LabVIEW Compare Tool
    Requires visual (GUI) rep of diff files
    LabVIEW SCC Compare Palet
    Allows for direct Labview connection to SVN but requires PushOK installation or similar client.
    LabVIEW procmphier.llb -> CMP Compare two Vis.vi
    Cannot access the SVN repository, so will need to determine way to create app reference to the repository VIs

  • Using the "Data Merge Tool"

    Hi everyone,
    I have a 2 questions about the data merge tool. I understand how to use a CSV file to replace dynamically any text I desire.
    1. Can I use this same tool to replace pictures? Say, like if I create baseball cards for an entire team.
    2. If I use it for creating business cards, but I only need to create ONE card at a time... I like how the "Records per document" option that optimizes the page size to fit as many as possible. Ok, to the question; How can I print one record at a time, multiple times (say 20 per page) and include art for the other side of the page (double side print, that does not contain variable data, just a background)? I just need to make sure the tool knows how to line the art up, so that when it is cut, the front and back art is aligned properly.
    Thank you for your time.
    Rafa.

    Hi Lori
    Many thanks the binding was set to 'none'.
    Regards
    Dave

  • Error on merged tool area masthead iview on  Preview

    Hi Porat Gurus,
    I have merged the Mast head Ivew with the top level tool area and added all the components that is required for tool area search in mast head Ivew in the lightheader page and deploying its giving error
    Portal Runtime Error
    An exception occurred while processing your request
    Exception id: 11:50_14/10/08_0008_7205750
    See the details for the exception ID in the log file.
    plz tell where do i search for this exception
    i could nt find anything in default trace
    thanks in advance
    johny

    Hi Jhonny,
    Hope this link will be useful for u :
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/13167160-0a01-0010-909c-c4c6362a7c60
    Regards,
    Nithya

  • Problems with syncing audio to video using merge tool

    I ran into a new problem that I have not had.
    The project was shot on 35mm and transfered to 1080p 23.97 10bit uncompressed. I took the file in to FCP and through media manager maid a copy of it to ProRes 422 HQ 1080p.
    The Problem is when I broke the clips up for each scene and take (like I usually do) and set my IN on the clapper and my IN on the audio file for that take at the sound of the clap and go to merge clips on IN points. The clip merges but not at the points I told it to. The audio gets shifted down or up by a good few seconds.
    Why is this happening?
    When I take the footage with the same IN mark and put it on the time line and the Audio with he same IN mark and put it on the time line it matches up. But not when I merge clips. I cant think what Im doing wrong if anything since this is the first time I have had this issue.
    Thanks to all!

    I don't think FCE has a multi-cam function like FCP does ... so here's another way to do it (if it does have a multi-cam function, disregard this).
    • Place the clip you'll likely to use most on track V1 (along with the audio on A1, A2).
    • Place the other clip on V2 (audio on A3, A4).
    • Double click one of the clips to load it into the Viewer window.
    • Play the clip until you find a good sync point (either visually or audibly).
    • Place a marker at that point.
    • Double-click the other clip to load it into the Viewer and find the same point on that clip.
    • Place a marker at that point.
    • In the Timeline, line up the two clip markers - it will help to zoom in to make sure they're perfectly lined up.
    • Once you have the two clips in sync, double-click the upper clip to load it back into the Viewer.
    • Click on the Motion tab and use the Scale and Center controls to get a picture-in-picture effect.
    • Back in the Timeline, unlink the audio and video from both clips.
    • You can delete the audio clip that you don't want to use.
    • In the Timeline, as you're going through the footage, cut out the parts of the clip on V2 that you don't want using the Blade tool.
    • When you're done, select all clips remaining on V2, right-click on one and select "Remove Attributes" then choose Basic Motion (all clips will go back to full size and centered).
    • If you want to consolidate all of V2's clips with the clip on V1, select all of V2's clips, then holding down the Shift key, drag the clips down to V1.
    • At this point, you can use the Roll tool to tweak your edit points if needed.
    • Add transitions as desired.
    This will only work if both clips are continuous (camera did NOT start and stop during the take).
    -DH

  • Why isn't the merge tool working properly?

    For instance, if i try to merge two shapes with diferent colours, or if they are with the same color but they dont interfere, the shapes will group, but wont merge. I got two shapes with the same colour and they are intefering, and the paths are closed, and when i try to merge them it will group them. It happens sometimes, but i cant figure out what is it.

    You are welcome, Stefan.
    I believe different colours have been the (main) stumbling stone.
    A few quotes (almost, hopefully reasonably accurate):
    Unite traces the outline of all objects as if they were a single, merged object. The resulting shape takes on the paint attributes of the top object.
    Merge removes the part of a filled object that is hidden. It removes any strokes and merges any adjoining or overlapping objects filled with the same color.

  • File comparison and merge tool

    could you please tell me a nice (free if possible!) file comparison tool for the mac.
    I currently use Beyond Compare (http://www.scootersoftware.com/) or WinMerge (http://winmerge.org/) on XP
    thanks in advance
      Mac OS X (10.4.8)  

    You could get out your original DVD that came with your computer and install the developer tools that Apple provides.
    Once installed, you can open /Developer/Applications/Utilities/FileCompare.app
    This is free and useful.
    If you cant find your original DVD you can get if from developer.apple.com

  • Custom Modifications when Track Updates - Merge/Diff tool?

    Hi all,
    We are in the  process of upgrading to ESS 603(EHP4) and would like to know how we can merge our DC customizations with the new DCs.
    We have two tracks created.One for the new enhancement pack and the copy of old one(where we did all the customizations).
    Is it possible to do the merging of the customizations with the Diff/Merge tool?
    Thanks
    Kukku

    Could you please explain, what is the procedure you followed.
    Thanks
    Edited by: BalajiN on Dec 10, 2009 7:31 PM

  • Merge Address Book creates 4 of the same addresses on a Post Card in Pages

    I'm a little miffed right now because I just spend 20 minutes on the phone with apple support who told what I needed to do but couldn't tell me 'how' to do it.
    I'm trying to print multiple postcards (pages default if 4 postcards/page), all I want to do is merge my address book onto these postcards with EACH SEPARATE POSTCARD having different address...that means on a page with 4 postcards, I have 4 different addresses. What currently is happening is that I'm merging about 200 addresses from my address book, and it creates the same address 4 times(on one page, all four postcards), then creates another page for the next address (4 more postcards on that page). This leads to 4x's the amount of postcards I need to actually print.
    Support told me that I need to change the setting from 4 post cards per page to 1 post card per page...but couldn't tell me how to do that. They suggested I look in 'help' for an answer....which I always do before calling support anyway. Any help would be nice here. I thought my apple protection service/support plan would help in instances like these...and YES, this answer came from an 'applications specialist'.

    Cgip wrote:
    Here's my question then, if the default in the postcard template is 4 post cards/page, how do I change it to one? This really seems like it'd be an easy fix, but I may be wrong.
    I wrote:
    The merge tool merges one record in one document. If the document is a "one_page" one, this means one record per page even if the document uses only 1/4 of the sheet.
    We are writing upon a MERGE tool, not upon a LABELIZER one !
    The only soluce would be to use a custom paper size whose height and width will be half the standard one.
    Doing that you will be able to print one card on one small page.
    If you try to put a single card on a page you will leave 3/4 of the sheet white.
    You may also build four templates,
    one with the card top-left
    one with the card top-right
    one with the card bottom-left
    one with the card bottom-right
    So you will be able to print
    1/4 of cards with template 1
    1/4 of cards with template 2
    1/4 of cards with template 3
    1/4 of cards with template 4
    As I wrote, "doing (exactly) what you wish can't be done with Pages".
    This is what was responded many times.
    What you wish has nothing to do with MERGE. It's the job of a LABELIZER tool !
    Yvan KOENIG (from FRANCE samedi 3 mai 2008 18:59:03)

Maybe you are looking for