Merge two versions

I have done a very stupid thing, but maybe there's help:
I wanted to publish part of my homepage. So I backed up everything via Time Machiene,, then deleted all the parts I didn't want published, and published the rest. What I didn't know: TM backed up the new version with all the parts deleted, not the last version I saved.
So now I have two backups in TM: one with a new site I created, but without all the rest that isn't finished yet, and one with the unfinished rest, but without the new site.
Is there any way to copy that new site into the older version?

Restore both versions and then use iWebSites to merge the two into one file, two sites. Then you can drag Page 1 of Site 2 into Site 1 and put it anywhere in Site you you'd like. The same goes for the other pages in Site 2 that you want to move to Site 1.
OT

Similar Messages

Merge two versions of my website?

I have saved two versions of my website and would like to 'transfer' a couple of the pages from one to the other to make the perfect one. The master pages are the same in both. Is that possible?
I can't even open the two versions at the same time.

Hi mslens,
At this point of time you have the option of opening both web sites together in different tabs and select all the content you want to move and copy paste to the web site where you want it to be.
Regards,

Merging two versions; one w/PAL Audio one w/NTSC Video

Here's an oddity...for a project was given a 2 hour video file in NTSC w/really bad sound levels. When I asked for it to be given a corrected copy, I got one with PAL video, with bad picture but great sound. Trying to get a third copy (third time is the charm) but for fun trying to see if there is a way to merge the two. First thing I tried was using the PAL Audio under the NTSC video (which of course didn't work, as the audio was longer due to frame rate, I assume). Then tried to change the length of the PAL audio in ProTools, changing it's speed by a small percent so the final length matched the NTSC video (fun experiment, but the synch wasn't at all right). Even tried converting the footage via Nattress, but no such luck.
Curious if there's anything else I should try for experimental learning...

Hi Phrisbee,
If it is set to 1.5meg than that is fine.
I say downoad as it has to match this when people have a asymetric service like most (A)DSL services are.
IF you don't know what you actually get from your ISP or want to test it there are test sites
http://www.auditmypc.com/internet-speed-test.asp
7:49 PM Wednesday; July 5, 2006

Cannot merge two event together in Photo 1.0 Version

I remember it was possible to merge two events by simple drug-n-drop in previous version.
Why it's not possible to do in new Photo 1.0 Version?
Is there any workarounds? Events management became simply impossible.

Moments are the new Events. However, all of your iPhoto Events have been brought over as albums and are located in the folder titled "iPhoto Events".
First open the sidebar with the View ➙ Show Sidebar menu option:
To merge Album/Event A into Album/Event B open A. Select all of the photos in it and drag onto the Album B icon in the sidebar. Verify that B has all of the photos and delete Album A.
Granted it's not as easy as iPhoto but that's what we're left with. Along those same lines there's a way to simulate events in Photos.
When the library was first migrated there was a folder created titled iPhoto Events and all migrated iPhoto Events are represented by an album in the folder.
When new photos are imported into the Photos library go to the Last Import smart album, select all the photos and use the File ➙ New Album menu option or use the key combination Command+N. Name it as desired. It will appear just above the iPhoto Events folder where you can drag it into the folder
When you click on the iPhoto Events folder you'll get a simulated iPhoto Events window.

Itunes two versions of the same album?

Hello,
I have two versions, high res audio and CD quality, of the same album of an artist located in two folders "Album Title" and "Album Title HD".
By adding the two folders to the iTunes mediathek, all tracks are merged under "Album Title" in iTunes. Do I have to manipulate the meta data to avoid this behavior in iTunes? Interestingly the views on the Mac and via iOS Remote App are different:
Mac:
Track 1
Track 1 HD
Track 2
Track 2 HD
etc.
Rmote App:
Track 1
Track 2
Track Last
Track 1 HD
Track 2 HD
I disabled the automatic handling option for iTunes import. So still two folders in the iTunes music folder exist.
Any ideas?
Andreas

If you want them to appear as separate albums you will have to change the metadata for one of the albums. There are many ways to do this and which one you use will depends upon your preferences.
You can make it obvious by doing something such as adding a descriptor to the album name e.g., Album Name [CD quality]
You can "hide". If you do not normally use the album artist field and you add an album artist to that field for one of the versions it will cause that to sort separately. Similarly if you add a number to the disc number field that should normally get it to display separately.
Alternatively you can come up with a smart playlist to sort according to kind.

How to merge two xmls.

Hi All,
I want to merge two xmls in my output. My scenario is I am getting two sets of outputs and I want to merge them to get my final output. I my output I have a header and a Lineitem. I my final output I want to keep header only once and all the LineItems one by one.Can anyone suggest something.
First outout:-
<outputVariable>
-<part name="payload" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
-<SiebelOrderQueryByExample_Output xmlns="http://siebel.com/asi/">
-<ns:SiebelOrderQueryByExample_Output xmlns:ns="http://siebel.com/asi/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
-<ListOfOrderInterface xmlns="http://www.siebel.com/xml/Siebel%20Order">
<Orders>
<Id>1-15IXJ</Id>
<OrderNumber>1012-1234</OrderNumber>
<ListOfLineItems>
<LineItems>
<Id>1-15IY3</Id>
<OrderNumber>1012-1234</OrderNumber>
<LineNumber>301</LineNumber>
</LineItems>
</ListOfLineItems>
</Orders>
</ListOfOrderInterface>
Second output:-
<outputVariable>
-<part name="payload" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
-<SiebelOrderQueryByExample_Output xmlns="http://siebel.com/asi/">
-<ns:SiebelOrderQueryByExample_Output xmlns:ns="http://siebel.com/asi/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
-<ListOfOrderInterface xmlns="http://www.siebel.com/xml/Siebel%20Order">
-<Orders>
<Id>1-15IXJ</Id>
<OrderNumber>1012-1234</OrderNumber>
<ListOfLineItems>
<LineItems>
<Id>1-15IW2</Id>
<OrderNumber>1012-1234</OrderNumber>
<LineNumber>302</LineNumber>
</LineItems>
</ListOfLineItems>
</Orders>
</ListOfOrderInterface>
The required output which I want after merging.
<outputVariable>
-<part name="payload" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
-<SiebelOrderQueryByExample_Output xmlns="http://siebel.com/asi/">
-<ns:SiebelOrderQueryByExample_Output xmlns:ns="http://siebel.com/asi/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
-<ListOfOrderInterface xmlns="http://www.siebel.com/xml/Siebel%20Order">
-<Orders>
<Id>1-15IXJ</Id>
<OrderNumber>1012-1234</OrderNumber>
<ListOfLineItems>
<LineItems>
<Id>1-15IW2</Id>
<OrderNumber>1012-1234</OrderNumber>
<LineNumber>302</LineNumber>
</LineItems>
<LineItems>
<Id>1-15IY3</Id>
<OrderNumber>1012-1234</OrderNumber>
<LineNumber>301</LineNumber>
</LineItems>
</ListOfLineItems>
</Orders>
</ListOfOrderInterface>
Thanks

I am not using file adapter. I am taking inputs from the BPEL client and displaying output to the client. My input xsd is:-
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns="http://www.example.org/ns/intorder"
targetNamespace="http://www.example.org/ns/intorder"
elementFormDefault="qualified">
<xsd:element name="order" type="orderType">
<xsd:annotation>
<xsd:documentation>
A sample element
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:complexType name="orderType">
<xsd:sequence>
<xsd:element name="Order_Number" type="xsd:string"/>
<xsd:element name="Line_item" type="LineType" maxOccurs="unbounded" minOccurs="0"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="LineType">
<xsd:sequence>
<xsd:element name="Line_Number" type="xsd:string" />
</xsd:sequence>
</xsd:complexType>
</xsd:schema>

How to quickly find the difference of two version of RPD?

Hi all,
Does anyone have good idea about quickly finding the difference of two versions of RPD in the project?
Regards,
Anne

This might be of help to you
http://varanasisaichand.blogspot.com/2010/03/how-to-merge-two-repositories.html
http://www.rittmanmead.com/2010/07/obiee-11gr1-incremental-patches-to-the-rpd/
Cheers,
KK
Edited by: Kranthi.K on Dec 7, 2011 9:41 PM

Merging two XML Document Objects

I'm trying to merge two seperate XML Document Objects into one Object.
Any suggestions would be very much appreciated.
This is what the Objects look like when returned.
FIRST:
<?xml version = '1.0'?>
<app>
<name>Home</name>
<active>true</active>
<order-as-sibling>1</order-as-sibling>
</app>
SECOND:
<app>
<name>Developers</name>
<active>true</active>
<order-as-sibling>6</order-as-sibling>
</app>

That would work nicely if the XML documents had names, but they are coming back as a list in an XML object. I have about 8 separate XML Objects I'd like to merge into one.
Thanks

Merging two separate Keynote slideshows

Is there a way to merge two Keynote slideshows into one slideshow? I'm a fairly new Mac user and don't know how to do many technical things with Keynote...
Thanks for any assistance.

Sorry, do you mean a slide show narration? That will be tricky I suspect. You may need to merge the two audio files but I'm not sure how exactly you go about that. I imagine you would have to locate the narration files (they will be in the keynote package), merge them together and save back into the 'single' version of the keynote presentation.
Searching for narration in this forum will give you the name of the file you are looking for. You'd probably use something like Garageband to edit the two together. Hopefully someone else can help with exact instructions.

Merge Two Macbook iPhoto libraries Onto 1 External HD

Hi. I have backed up my iPhoto library from what I'll call MacBook "a" onto a 1tb external hard drive. I did this buy dragging the iPhoto icon over. It worked.
I also have a very small iPhoto library on Macbook "b." I would like to merge this Macbook "b" library onto the same external hard drive. When I have tried exporting the files from macbook b, however, they photos are copying to the hard drive, but not to the iPhoto library.
Is there a way to merge two distinct iPhoto libraries, from two distinct computers onto 1 external hard drive?
Thanks.
John.

If you have Aperture 3.3 or later and iPhoto 9.3 or later you can merge libraries with Aperture.
Otherwise the only way to merge Libraries is with the paid ($30) version of iPhoto Library Manager

Error Importing Schema on 7.1.04.131 (trying to merge two repo.structure)

Hello MDM Experts,
I am trying to merge CUSTOMER and VENDOR repository and getting an error while importing repository schema. We are on MDM 7.1 version 7.1.04.131(SP04 and latest Patch08). when i choose Transport>Import repository schema, "Import Schema VENDOR" screen pops up which gives me an opportunity to accept or reject tables/fields/roles etc...after finished with accept/reject tables/fields when i hit OK system gives me an error saying...
"Error Importign Schema"
"One or more of the selected items requires that you select additional items"
Has any one come across same error while merging two repository structures..? or any suggestions would be appreciated..
Thanks in Advance
Rohit

Hey Rohit,
This error could come due to several reasons, some of the most common ones can be:
1. You have defined a Remote System and Port, and assigned a syndication/Import map to it, now if you transport only the Port, you can get the error since the Port has a dependency on Remote system and you should transport both of them together.
2. You have defined a Main table (or a lookup table) which has a dependency on another lookup table. Now if you transport only the Main table, you will have an error since Main in dependent on Lookup table.
If it is possible, you can try transporting whole repository , instead of individually picking and choosing objects. This will make sure all the objects are transported. If that is not the case then you need to look at all the objects and make sure its dependent objects are also transported.
Thanks
Aamir

HOW CAN I MERGE TWO IPHOTO LIBRARIES

IS IT POSSIBLE TO MERGE TWO IPHOTO LIBRARIES?

If you have Aperture 3.3 or later and iPhoto 9.3 or later you can merge libraries with Aperture.
Otherwise the only way to merge Libraries is with the paid ($20) version of iPhoto Library Manager
It's possible to turn off caps lock too.

HT4927 Can I merge two iphoto libraries?

Can I merge two iphoto libraries? Somehow when I restored one of my libraries from my time machine backup, I got two libraries instead of one. Can I combine these?

Not with iPhoto - Aperture can o rthe purchased version of iPhoto library Manager can
LN

Merge 2 versions of _resources.xlf files or update .xlf frm .properties

Hi Everyone,
I need your advise again: I can esily merge 2 versions of b2b_bd_resources_en.properties files by copy/paste but don't know how to merge 2 versions of b2b_bd_resources_en.xlf files or how to update b2b_bd_resources_en.xlf from b2b_bd_resources_en.properties (after added and saved b2b_bd_resources_en.properties, b2b_bd_resources_en.xlf keeps same does not get updated).
Any advises / suggestions?
Thanks, JIn

Hi Jin,
.xlf file is converted to .properties file after building the application.
Can you please tell me why you have created 1 xlf and 1 properties file with the same name.
There is no way in NWDS to merge these two files but whatever entries you are making to .xlf
file will be available when you will run the application.The only way is to copy the contents.
Regards,
Arshi

Merging two projects with Premiere elements 12.

Hello,
On my computer (windows 7) i have different directories with movie-fragments. From each directory i made a movieproject. It took a long time to trim everything. Now i have one project from 1,5 hours and another from 20 minutes. I would like to put the two projects together and then cut it into two projects. I was suprised that i could not do that. I could not copy the movie with titles in one project and copy it to the other project. Also i could not find any way to import one movie into the other. Very strange. I would think that this is a basic function the program should have.
I found out that i can work of course with the Project Asset and import the moviefragments again, but then i have to trim everything again.
I could also export one movie as for example AVI and then insert it with the Project Asset into the other project. But then i have no possibility to change the titles and transitions.
Does anyone know a way to merge two projects?????
Many thanks, Stephan

Stephan
You wrote
I used it a lot when i worked with the program i used before Premiere Elements.
Important: What version of Premiere Elements are you referring to in the above? Or, are you referring to another program that is not Premiere Elements?
No version of Premiere Elements allows the user to open one project file (project.prel file) in another.
You can copy/paste insert between two project files (project.prel) using ClipMate in conjunction with Premiere Elements. You cannot do a copy/paste insert between projects without ClipMate in use with Premiere Elements. The How To for this Windows Only feature is found
http://www.atr935.blogspot.com/2013/05/pe-clipmate-copypaste-between-pe.html
The alternative is to export your project 1 Timeline "trim" selectively to a file saved to the computer hard drive and then import that export into project 2.
In this workflow considerations need to include project 1 export format consistent with project 2 import settings.
So, we need details to explain the why not for
Also i could not find any way to import one movie into the other. Very strange. I would think that this is a basic function the program should have.
and
I was suprised that i could not do that. I could not copy the movie with titles in one project and copy it to the other project.
In the first part, what were your export settings from project 1 and your project preset for project 2.
In the second part, did you use ClipMate with Premiere Elements or something else?
What you want to do sounds very doable so we need to discover the whys to get to the solution.
Thank you.
ATR

Merge two versions

Similar Messages

Maybe you are looking for