Merge with first column

When i try to merge the 2nd cell in a row with the first cell, the "Merge cells" option is greyed out yet the option is there for all other cells in the row. What is it about that fist column than makes it so you can't merge with it? Is it a header column? Anybody know why or how to fix? Thanks.

There is a way to convert a standard column into a header column.
The reverse is unavailable.
You must insert a standard column between column A and column B.
Copy the contents of the column A
Paste into the new column B
Delete column A.
Yvan KOENIG (VALLAURIS, France) samedi 6 novembre 2010 21:13:43

Similar Messages

How to get ALV Display with First column alone in sort

How to get ALV Display with First column alone in sort

HI,
You can build Internal Table and send this to the parameter "IT_SORT".
eg:
"the sorting Internal Table structure is as whown below.
DATA: t_sort_info type slis_t_sortinfo_alv.
"Build the Sort Internal Table
t_sort_info-fieldname = 'CARRID'.
t_sort_info-subtot = 'X'.
append t_sort_info.
t_sort_info-fieldname = 'FLDATE'.
t_sort_info-subtot = 'X'.
append t_sort_info.
Then pass this "IT_SORT_INFO" table to the Function module "Reuse_alv_*". (Note send the body of the Internal table only like "<b>IT_SORT = IT_SORT_INFO[]</b>".
Here i am making ALV output sorted on CARRID & FLDATE.
You can specify only the First Column name for sorting.
Regards,
Manju
Message was edited by:
MANJUNATHA KS

Order by in MATERIALIZED VIEW not work successfully with first column (ID)

Dears,
I am trying to create a Materialized View as below:
CREATE MATERIALIZED VIEW HR.MV_EMP
PCTFREE 10
MAXTRANS 255
TABLESPACE users
STORAGE (
INITIAL 65536
MINEXTENTS 1
MAXEXTENTS 2147483645
BUILD IMMEDIATE
REFRESH ON DEMAND
AS
SELECT *
FROM employees
where rownum < 5000 order by employee_id desc ;But while querying the MATERIALIZED VIEW, it did not work successfully as the data did not appear in the accurate order.
I tried to create the same MATERIALIZED VIEW but order by another column (Column Date), it worked successfully and the data appeared in the accurate order.
It means that MATERIALIZED VIEW not work successfully with the first column (id).
Can you please help me in this ?
Thanks & regards,,

A few pointers :
1. As has been pointed out, the ROWNUM has been incorrectly placed. ROWNUM values are assigned as rows are fetched from the source before the ORDER BY. You need to ORDER BY first (in a SubQuery) and then ROWNUM afterwards (outside the SubQuery).
2. I wonder why you want only the last 5000 EMPLOYEE_IDs. What if Employee_ID 1 is still an active employee (he is the founder, first employee and CEO ?). There could be very many "low" EMPLOYEE_IDs that are still active.
3. Logically I would expect some filter other than the ROWNUM ... ORDER BY to be used to select candidate rows. Then, an ORDER BY in the CREATE query would be unnecessary.
4. When querying the Materialized View you must explicitly ORDER BY (irrespective of whether you did or did not do an ORDER BY in the CREATE ...)
5. How do you expect to refresh the MV ? Will it always be a COMPLETE Refresh ? Remember that your "5000 employees" filter would likely exclude older employees at the next refresh. If you use some other filter, it should be consistent across all refreshs.
Hemant K Chitale

Columns merged with other columns?

how do I achieve the following?
I want to have a tabular form as following
The first line of the tabular form will only be 3 columns (eg. col1,col2,col3). those three columns will then be broken down into 9 columns (ed. col1 - no column, col2 will have col4,col5,col6, and col7, col3 wil have col8 to col12.) on the second line.
Any ideas? I know it is possible to do with html but i'm not sure how to process it in APEX

What I typically do first is to look at a report template from the current theme and see what CSS classes they are using against the tables, headers and rows. I will copy the entries to a text document so I can easily reference them.
The you create a new report template from scratch and as a Named Column (row template).
This type template allows you to specify where each column goes by using a substitution variable for the selected column.
The query I used in the example was
select ename, job, sal
from emp
For the Row Template 1 field under Row Template section, I put
<tr><td>#ENAME#</td><td>#JOB#</td><td>#SAL#</td></tr>
In the Before first and after last row text section I put
1. in the Before rows field
<style type="text/css">
table.outln {border-collapse:collapse;}
table.outln td {border: solid #000 1px;padding:5px;}
</style>
<table cellpadding="0" border="0" cellspacing="0" summary="" class="t9standardalternatingrowcolors outln" border="1">
<tr><th class="t9header" colspan="2">Name / Job</th><th class="t9header">Salary</th></tr>
2. In the After Rows field
</table>
This type of template is REALLY powerful. The only issues that I have run into in the past is that the order of the columns in your query should be the same as the order in which they are used in your row template. I am not sure if it is still an issue, but I have experience issues in the past that when you later change the query and the order is different then the rows are actually put in by position and not by name. To fix that problem I just drop the report and recreate.
If you happen to have my book by Oracle Press, HTML DB Handbook, there is a good description of this type of template on pages 211- 215.
The book is a little old now (almost 2 years). Just happened that they renamed HTML DB to ApEx the month before the book was published. It covers ver 2.0, but still has some good info in it.

How to fill the first column '#' of matrix with row id in user form?

Hi All,
I am having a user defined form in which, I m having a matrix and m populating the matrix with the output of an sql query.
something like this:
SQL_Str= "select col1,col2,......from.... "
OPopDBTable.ExecuteQuery(SQL_Str)
oMatrix.AddRow()
oMatrix.Columns.Item("Col3").DataBind.Bind("PopTable", "col1")
oMatrix.Columns.Item("Col2").DataBind.Bind("PopTable", "col2")
oMatrix.LoadFromDataSource()
Now, in this, how can I assign row number to first column ('#' column ) ??
regards,
Binita

Ah...the ROW_NUMBER() was posted by Petr - also thank you (again)
With my example-query from the other thread:
SELECT
     CAST(
             ROW_NUMBER() OVER (ORDER BY T1.U_LogNo ASC) AS INT
        ) AS RowCnt,
     T1.Code,
     T1.U_ParcelNo,
     T1.U_LogNo
FROM
     [@XXX_EXAMPLE] T1
WHERE
     T1.U_ParcelNo='132006'
ORDER BY
     T1.U_LogNo ASC
...this works for me (it's quickly copied from several subs/func. - I hope it's not too much disordered):
DtLogs.ExecuteQuery(query)
oMtxLogs.Columns.Item("0").DataBind.Bind("DT_LOGS", "RowCnt")
oMtxLogs.Columns.Item("1")........
oMtxLogs.LoadFromDataSource()

Sort a table with two columns based on the first

I have a powershell table with the columns 'Used Perc' and 'ID'.
This was formed from the following
$a = @{Expression={[System.Math]::Round(($_.nUsed_Avg/$_.nSize)*100,1)};Label="Used Perc";width=25}, @{Expression={$_.nStatisticalDiskIdentificationID};Label="ID";width=15}
$GLOBAL:CSV2 = Import-CSV $STATDISKOUT | Format-Table $a
Before this, the file $STATDISKOUT had the columns 'nUsed_Avg', 'nSize', and 'nStatisticalIdentificationID'.
My question is, how would I sort the new table based on 'Used Perc' but keeping the corresponding 'ID' column lined up to the right value?

We use a select statement to reorder columns and recalculate, The formatters just go at the end to adjust the display.
Import-Csv <file> | select <column order format> | Format-Table
or you can do it in the table:
Import-Csv <file | Format-Table -Properties ,f1.,f2.,,f3....Here is how to inset a sort inline:
$a=@{
L='ID';
E={$_.nStatisticalDiskIdentificationID};
L='Used Perc';
E={[System.Math]::Round(($_.nUsed_Avg/$_.nSize)*100,1)}
Import-CSV $STATDISKOUT | Select $a | Sort 'Used Perc' | Format-Table -Auto
¯\_(ツ)_/¯

Merging with Oracle BI Administration Tool

I have specific question about merging with Oracle BI Administration Tool.
At first, I copied rpd by merging with no common parent. After that, I renamed all objects in business layer and presentation layer, renamed name of database, name of connection pool, name of scheme in physical layer and deleted old aliases. And now, I want to merge my original rpd and final rpd, but I got this error:
Following objects didn't merge properly:
Logical Column ...
Logical Column ...
Logical Column ...
Logical Column ...
How can I solve this problem?
Edited by: kubes on 29.01.2012 23:58

Hi,
check whether you are merging as "No common parent " or with "Common parent".
Thanks
Kishore P

SQL Loader Inserts chr(13) and chr(10) in the first column of every row.

Hi,
I have exported a data in a pipe delimited file using TOAD in one database. Now I want to load the data in my local database using SQL Loader. However every time I try to load the data a double quote followed by a new line is entered for the first column of each row. Unfortunately the delimited file is very big and hence can't be posted here. However I tried the same with a customized table and its data and found the same problem. Below are the table structures and control file that I used.
create table test_sql
a varchar2(30),
b date
insert into test_sql values('51146263',sysdate-3);
insert into test_sql values('51146261,sysdate-1);
EXPORTED PIPE DELIMITED FILE_
A|B|!##!
51146261|04/14/13 4:55:18 PM|!##!
51146263|04/12/13 4:55:32 PM|!##!
create table test_sql1 as select * from test_sql where 1=2;
CONTROL FILE_
OPTIONS(SKIP=1)
LOAD DATA
INFILE 'C:\Users\Prithwish\Desktop\Test.txt' "str '!##!'"
PRESERVE BLANKS
INTO TABLE TEST_SQL1
FIELDS TERMINATED BY '|' OPTIONALLY ENCLOSED BY '"'
TRAILING NULLCOLS
A CHAR(2000),
B DATE "MM/DD/YYYY HH12:MI:SS AM"
select * from TEST_SQL1;
After this when I paste it in notepad I get the following result
A B
51146261" 14-APR-0013 16:55:18
51146263" 12-APR-0013 16:55:32.
I have no idea how the quotes or the newline appear. Is this a Toad bug? Any help would be greatly appreciated. Really urgent.
Thanks in advance
Regards

Hi Harry,
I actually thought that the str !##! was causing the problem. Actually my original export has some new lines in some specific columns so I can't keep the new line as my line terminator and hence I kept the !##! as my terminator.
When I put the same data in a notepad and load it there is no problem at all. For e.g I just typed the following in a notepad and the data loaded just fine.
A|B|!##!
51146261|01-01-01 10:10:10 AM|!##!
51146263|01-01-01 11:11:11 AM|!##!
Its just when I load the exported file there the problem arises though I have verified the file using UNIX as well using octal dump and found no hidden characters.
Regards,
Prithwish

How to link Excel Chart with multiple columns dynamically?

Hi all,
I have one problem. I have an excel chart which has to read data from multiple columns for it's X-axis values (time stamps) and the same number of values for it's Y-axis from multiple columns. See figure attached.
Now, you can do this by manually assigning values by holding control key to tell the chart that data from many columns is continued from the first column. i.e, a long data is distributed along may columns. This is done very easily manually.
Now, how to do it at runtime through LabVIEW 8.0?
Although, I have done it through labview when there where only two columns, A and B streching up to any length. But, now to save space we are dumping into many columns in the same page and want the chart plot that data as we dump it.
It is tough since I don't know how to assign SourceData of the chart through labview.
I have attached chart's SourceData picture.
Hope you all can solve my problem.
The Y-axis values are: =(good!$B$30:$B$70,good!$D$30:$D$70,good!$F$30:$F$70,good!$H$30:$H$70,good!$B$71:$B$140,good!$D$71:$D$140,good!$F$71:$F$140,good!$H$71:$H$140,good!$B$141:$B$189)
good is the name of the file.
The X- axis values are: =(good!$A$30:$A$70,good!$C$30:$C$70,good!$E$30:$E$70,good!$G$30:$G$70,good!$A$71:$A$140,good!$C$71:$C$140,good!$E$71:$E$140,good!$G$71:$G$140,good!$A$141:$A$189)
See the columns vary from A to F.
I have still not got what I love.....
Attachments:
ExcelChart.JPG ‏113 KB
SourceData.JPG ‏34 KB
XY values.JPG ‏36 KB

Ok i solved the excel chart problem. Here is the figure showing my victory! But offcourse with NI forum help.
Message Edited by Halemani on 09-19-2008 06:33 AM
I have still not got what I love.....
Attachments:
Chart_XValues_Values.JPG ‏36 KB

Why is my ping so high in the first column only when i do a tracert?

When i do a tracert my ping is really high in the first column only on each hop and then it drops to a respectable level. Does anyone know why it is like this on my 4G LTE device? On my dsl when i do the same ping test its pretty even across on each hop. This is what im seeing when i do a ping test on my 4G LTE device.
tracert www.yahoo.com
Tracing route to ds-any-fp3-real.wa1.b.yahoo.com [98.139.183.24]
over a maximum of 30 hops:
1     9 ms     3 ms     3 ms
2 1101 ms    34 ms    38 ms 193.sub-66-174-20.myvzw.com [66.174.20.193]
3   169 ms    55 ms    52 ms 49.sub-69-83-13.myvzw.com [69.83.13.49]
4    52 ms    56 ms    54 ms 194.sub-69-83-13.myvzw.com [69.83.13.194]
5   179 ms    58 ms    57 ms 101.sub-66-174-17.myvzw.com [66.174.17.101]
6   168 ms    57 ms    60 ms TenGigE0-0-1-0.GW14.BOS4.ALTER.NET [152.179.2.97
7   181 ms    58 ms    57 ms 0.ge-0-3-0.XL3.BOS4.ALTER.NET [152.63.17.130]
8   170 ms    59 ms    58 ms 0.ae3.BR1.NYC1.ALTER.NET [152.63.18.222]
9   177 ms    67 ms    59 ms ae11.edge2.NewYork.Level3.net [4.68.62.41]
10     *        *        *     Request timed out.
11     *        *        *     Request timed out.
12     *        *        *     Request timed out.
13   192 ms    49 ms    60 ms ae-4-90.edge4.NewYork1.Level3.net [4.69.155.210]
14   185 ms    51 ms    60 ms YAHOO-INC.edge4.NewYork1.Level3.net [4.28.130.82
15   380 ms    73 ms   129 ms ae-5.pat2.bfz.yahoo.com [216.115.96.67]
16   339 ms    69 ms   146 ms ae-4.msr2.bf1.yahoo.com [216.115.100.73]
17   215 ms   152 ms    80 ms xe-5-0-0.clr2-a-gdc.bf1.yahoo.com [98.139.128.11
18   289 ms   217 ms   217 ms et-17-1.fab6-1-gdc.bf1.yahoo.com [98.139.128.47]
19   187 ms    87 ms    79 ms po-14.bas2-7-prd.bf1.yahoo.com [98.139.129.227]
20   474 ms   314 ms   294 ms ir2.fp.vip.bf1.yahoo.com [98.139.183.24]
Trace complete.

hi there
see you never got an answer from vzw
take it you still have the high ping or no ping in my cases
your doing better then i
seems the lte is getting bad with this problem over time as my connection times out causing half loaded web pages and lots of buffering in video playback
i have had 3 tickets in the past 3 month to try and get this fixed but they say cant find anything wrong
and noone else is having the problem here are a few things that seems to have helped me out
1 increase your TTL time till live
this tells your computer to wait a bit longer before giving up and requesting that a packet of info be resent
2 in your computers network settings and reg you can change packet size to a smaller number and add a stop bit to the packet with a time stamp on each packet back in the old days this was what v 90 modems did to get v92 speeds and did help with noisy copper wire dial up and seems to help here too
http://www.dslreports.com/drtcp
is a tool that will help you change your computer setting and reg
use drtcp and the results from this page
http://www.dslreports.com/tweaks
xp win 7 win 8 this will help. vista did it right and dynamically change these settings on the fly and all of step 2 is unnecessary
remember your original settings write them down so you can go back to them should you have problems
also make a restore point and backup your reg before tinkering with windows os
send a private message to me if you need more help or get a computer savvy friend to help you out if you need
3 if your signal noise is under 4G -100bd the lower the better, there is a way to set your android to lte only mode.
more likely to lose data and voice in weak signal areas but great if tethering or hotspotting at home
dail *#*#4636#*#* this is a back door to your android software and is open source code by android os not vzw
and will not unlock your phone voiding warranties. be warned though if you set things wrong in here
you can make more problems be very sure what you change and do one thing at a time so you remember and can dial in again and change it back should you disable something you need. fyi each time you dial in the number it resets to vzw default setting and may look like it did not save setting but it doz. till you dial in again.
good luck
ron
ps im not a vzw rep in any way other then a fellow customer not getting answers.

Merging with microsoft account

I had one skype account which I deleted because I didnt like the username. My microsoft account was merged with that skype account.
Now I have created a new Skype account and I want to merge the same microsoft account with this new skype account. But I am unable to do so.
When I try to login using microsoft credentials it just say that the account has been suspended for my security. I had two live chat with skype support but thay are unable to resolve the problem.

under normal circumtances, one can easily unlink their Microsoft account with a certain Skype account (https://support.skype.com/en/faq/FA12211/how-do-i-unlink-my-skype-and-microsoft-or-facebook-accounts), then merge it with another Skype username.
However, in your case, as it seems that there are possible issues related to your microsoft account, you may need to settle the issue first and only the customer support can assist you with that. You can try to contact them again to know what your possible options are.
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES

Problem with checkbox column in matrix

Hello.
I have a little problem with checkbox column in matrix.
Column is binded to the UserData.
It has ValOn="Y", ValOff="N".
I use C++. It is wird problem. In matrix I have 10 columns - scrollbar role and if You want see checkbox column, You must role to the right. If this column is on the screen, and I use:
checkcell->PutChecked(VARIANT_TRUE);
then the checkbox is cheched, and if the checkbox isn`t on the screen and I use this comment - it nothing happening.
I tried to use ValOn="Y", PutChecked...
The problem i solved if the column is on the screen - if the column is first in matrix or second, but if it`s last I have a big problem.
My column with checkbox is not editable, but I tried to make it editable, check it, and then make it uneditable - the same efect.
How can I solve it ?
Sorry for my english.
Kamil Wydra

Hello Kamil,
I am not sure about your problem, but here is an example of how to use checkbox in UI API.
First, create the matrix with checkbox column in Screen painter, and the output is an xml file, like this. Type as 121 indicates that it is a check box.
- <column AffectsFormMode="0" backcolor="-1" description="" disp_desc="0" editable="0" right_just="0" title="Rented" type="121" uid="Rented" val_off="N" val_on="Y" visible="1" width="41">
<databind alias="U_RENTED" databound="1" table="@VIDS" />
<ExtendedObject />
Second, bind the column to table from DB. This is a bug of 2004 Screen Painter, so if you are using 2005 Screen Painter, there is no problem.
Third, when you open the form, you can check and uncheck the cell.
BTW, please set the editable of the column to true.
Hope this helps,
Nick

Report with multiplying columns and WITH clause

Hello
I saw sth strange in my report. I assume that it could happens very often.
I have report with few columns which two of them ar most complicated (many joins subqueries aggreagations on joined values etc.) These two columns (i.e C3,C4) should be multiplied (C3*C4).
When i do pure report without multiplying only columns C1,C2,C3,C4 everything is ok - duration about 15 sec. but... when I put next column on report which multiply these columns (in Answers C5=C3*C4)
I wait 3-4 minutes and my database hungs :(. After investigation I saw that in first case to databese goes pure "SELECT" statement it means:
"Select ... as C1, ... as C2, max(...) as C3, sum(xxx)... C4 from yyy,sss,ttt WHERE aaa"
but in second case BI uses WITH clause it means:
WITH SAWITH0 AS
( Select ... as C1, ... as C2, max(...) as C3, sum(xxx)... C4 from yyy,sss,ttt WHERE aaa )
SELECT SAWITH0.C1 as C1,
SAWITH0.C2 as C2,
     SAWITH0.C3 as C3,
     SAWITH0.C4 as C4,
     SAWITH0.C3*SAWITH0.C4 as C5 FROM SSS
and this statement is long runninq query and kills my database :(.
I checked that SQL like this:
Select ... as C1, ... as C2, max(...) as C3, sum(xxx)... C4, max(...)*sum(xxx)... As C5 from yyy,sss,ttt WHERE aaa" -
runs few times faster than that above
I know that I can do this multiply in business model layer but sometimes users can multiply(or other operations) on columns in reports without my knowledge and it kills my db :(. Where is bug? Why SQLs with WITH clause takes so much db time?
Thank you for each kind of help

WITH clause or Subquery Factoring allows the set of data to be reused multiple times within the SQL. Oracle will usually materialize the data into a temporary table (you will see it if you take an explain plan of the SQL).
I would be surprised if it was the actual WITH clause that was causing the performance issue, however you can test this by turning the WITH clause feature off. Go to the Physical model, right mouse click on your Database > Properties > Features Tab, scroll down to WITH_CLAUSE_SUPPORTED and switch it off.
I'd be interested to know if you do see actual improvement.
Good Luck.

I upgraded my Itunes to the latest version and now it won't let me view my library with the column browser. Can i get that back?

i upgraded my Itunes to the latest version and now it won't let me view my library with the column browser. Can i get that back? I tried using the shortcut for it and nothing happens. When I try to do it from the view menu, it shows up as something I can't click on. The new library format is driving me crazy and I just want to get back to the old library view.

We need to sort out some facts here first:
• You cannot be running Mt. Lion on your iMac G5. What Mac is it? What is the Model Identifier listed in About This Mac; More Info; Hardware Overview
• What is the model of your Epson Scanner?
• Have you attempted to scan using Image Capture, located in your Applications folder?
• Your Palm Pilot software will only run in Snow Leopard; so depending upon which Mac you have, you will either have to:
1) partition your hard drive or add an external hard drive and install Snow Leopard into it to "dual-boot" when you want to access you Palm software, or
2) install Snow Leopard Server (now available from Apple for $20 telephone orders USA & Canda only) into Parallels 8 to run your Palm software in Mt. Lion:
[click on image to enlarge]

Contacts merged with device that shares the same iTunes account as me

My husband and I share the same itunes account on our phones so whenever he downloads something new it downloads on my phone as well and vice-versa.
Just recently, after iOS 6 update, we noticed that his contacts merged with my iPhone & my contacts have merged with his. Also, he is getting notifications from an app that we share... But the notifications are from MY friends on facebook. The app is called voxer and whenever someone (from my Facebook friends) sign up, my husband gets the notification. Which is really weird because im not even signed on to Facebook on his phone. Somehow my information has merged with his phone and his mine. Why is this? Is there a way I can make things back to normal? Thanks in advanced.

Sounds like you may be syncing your contacts to the same iCloud account on both phones if your contacts are merged. You can share the same iTunes account for purchasing apps and music, but to avoid merging data you sync with iCloud you need to set up separate iCloud accounts on each phone.
To do this, first decide which phone will be changing accounts. On this phone that will be changing, go to Settings>iCloud and turn all data that is syncing with iCloud (contacts, calendars, etc.) to Off. When prompted choose to keep the data on the iPhone. After everything is turned off, scroll to the bottom and tap Delete Account. (This will only delete the account from this phone, not from iCloud. The other phone will not be effected by this.) Next, set up a new iCloud account on this phone using a different Apple ID and turn iCloud data syncing for contacts, etc. back to On. When prompted, choose Merge. This will upload the data to this new account. At this point you will have two different iCloud accounts, one for each phone, with identical data on them.
You will then have to go to icloud.com on your computer and sign into each iCloud account separately and manually delete the other person's data from your account (such as deleting your husband's contacts from your account, and vice versa). These changes will be reflected on each phone; when you're finished you will have individual iCloud accounts with just your own data on them.
Don't know anything about your problem with voxer notifications.

Merge with first column

Similar Messages

Maybe you are looking for