Merged clip starts 32 seconds in

I am editing on Premiere pro cs 5.5 working with DSLR footage at 1920 x 1080 at 29.97fps that I synced with separate recorded .wav audio. The sync worked fine and I took notes based on timecode in the timeline playback. Now, I'm ready to edit and I merged the audio and video clips in the timeline to a new clip. The problem is when I play the merged clip back in the Source preview, the timecode starts at 00:00:32:11, not 00:00:00:00 like normal. I have no idea why it would do this and why it doesn't start at the beginning. It wouldn't be a big deal but I took all my notes based on the timeline timecode so now everything is 30 seconds off.

Right click the keyframes and change Spatial Interpolation to Linear.

Similar Messages

How do I get my merged clips to reconnect with their audio?

I am on FCP 7 syncing audio and video with ProRes 4444 @ 23.98. I am merging clips into bins labeled according to their scene. Pretty straight forward.
We then decided to go to ProRes 422 proxy to edit on a smaller faster drive at a lower cost. I transcoded the footage to 422 proxy with MPEG Streamclip same frame rate, same dimensions 1920x1080.
Next I go to relink the footage. Audio relinks and gives me this message: (Keep in mind these are copy and pasted files on the new hard drive).
"Some attributes of one or more of the files you have chosen do not match the attributes of the original.... The attributes that differed are as follows:
- Media start and end
Would you like to try to reconnect them again?"
Video relinks and gives me the same message, but adds "reel" as another attribute.
I've seen these messages before and nothing has come of it so I didn't think anything of it at first. Checking all the individual audio and video clips. Everything is playing fine.
THEN I go to play my merged clips... no audio!? Double click a merged clip in the browser, clip plays in the viewer but NO AUDIO. Right click on the merged clip file, select Item Properties and format. It is recognizing the correct audio clip that should be playing in the info there. I drag the clip into the timeline and I can see the shadow of the audio and video clip but when I let go in the timeline only the video appears.
How can this be?? What am I missing??
I would be so grateful for any ideas you might have!

What happens if you control click on the audio clip in the timeline and choose "reveal in finder?"

Serious error using merged clips

Premiere crashes when I try to use a merged clip. When I double click on the clip it loads into the preview panel, but when I perform any actions such as overwrite or insert or if I right-click on the clip I get this message: "Sorry, a serious error has occurred that requires Adobe Premiere Pro to shut down..."
Here are the details:
All the clips I am using in the project are merged clips.
The video clips are AVCHD with reference audio, and the audio clips are .wav 48 MHz.
Running a Mac Pro OS X 10.9.3 and the latest update of Premiere Pro CC 2014
I have tried the following:
turned off GPU accelerated preview in favour of software only
deleted the merged clip and re-created it (in case it was somehow corrupt)
opened the project with a different system user (to rule out user settings)
started a project from scratch, merging the same clips and then performing similar tasks
emptied the After Effects cache
spent 90 minutes with tech support controlling my computer trying various things I'm not certain about
Wasting too much time. Tempted to revert to FCP until this is resolved. Please help.

I don't know about cc 2014, but in the past 5 months working in cc 7.2.1 & 7.2.2 I've found merged clips to be incredibly unstable/buggy. In one case a handful of merged clips were preventing me from importing sequences from other projects. I've run into issues where the match-frame function doesn't work with them, and worst of all every time I've used them they've significantly slowed down premiere (creating a very annoying lag between every interaction with the program).
My workaround has been to avoid merged clips at all costs, and instead use single-angle multicams to group video & audio from different sources. It ain't ideal, but it's been a far more stable workflow.
Don't know about the 2014 version - I'm afraid to give merged clips another serious try after all the headaches they've caused in the past. If anybody has seen improved stability with merged clips in the recent update I'd be very interested to hear.

How do I edit a merged clip in Audition, that was created in premiere to correct the synchronisation, and have it all updated to the premiere clip?

Hello,
How do I edit a merged clip in Audition, that was created in premiere to correct the synchronisation, and have it all updated to the premiere clip?
I have tried several tutorials but these either:
- show correction in premiere sequence (which is not practical; given the huge number of files we have)
- or show the editing in audition of a sequence, not the clip.
We have started merging audio and video (removing the original audio during merge) but some of the merged clips are out of sync, so we need to correct manually, BUT we want to correct the merged clip, which may or may not end up being used, so we do not want to take it to the sequence as all we are doing is prepare the synced files for editing.
Any idea how I can correct the synchronisation in Audition?, when I right click on clip and select "Edit in Adobe Audition" I get a list of files but not a multitrack session where I can see my video and audio tracks.

if premiere pro doesn't sync your footage properly, and you have a huge number of files, you may want to look at pluraleyes. there is a demo, and if it works properly, it would save you time to have it done right the first time, instead of tracking down random merged clips with bad sync.
premiere will either export a complete sequence or "edit clip in audition". the edit clip will create a copy of the original audio and open that in audition. there is no dynamic link, its just an audio file open in two programs at the same time. since there is no dynamic link, its not possible to bring merged clips into audition.
Adobe Premiere Pro Help | Synchronizing audio and video with Merge Clips
Once created, the merged clip cannot be re-synchronized, or adjusted. You must make a new merged clip.
Merged clip audio results in mono track audio only.Final Cut Pro XML and AAF interchange formats are not supported.
this doesn't give me much hope that audition or any other adobe program outside of premiere will help you fix the problem merged clips.

CS6.0.2 Merged clip bugs

Having struggled with my typical editing style using dual sync sound i've been able to replicate a few bugs, by listing them here my hope is to get other editors using "merged clips" with dual sync sound can find a solution around them. This has come up a few times in the forums but hasn't specifically addressed the bugs.
http://forums.adobe.com/message/4503977
http://forums.adobe.com/message/4676617#4676617
These bugs are with using Merged clips.
1. using the match frame command from a clip in a sequence and then using a replace edit from source monitor on another clip, matches frame on video, but sync is off on the audio. Using match frame on the newly replaced clip does reconnect to the correct timecode with the audio in sync, however the audio and video in and out points do not line up with the matched frame clip. So you can't just use the overwrite edit with the matched framed merged clip. Once you've matched frame with the incorrectly referenced audio, you can not use the replace edit command again, it gets grayed out.
2. This same bug occurs when find an merged clip in the browser, creating in and out points and using the replace clip command from bin. The audio is out of sync and replace edit command becomes grayed out.
3. Once the mismatch in the audio sync has occurred from the replace with match frame, the merged clip in the bin when loaded into the source monitor shows the inpoint and out point of the video, and a separate in and out point of the audio, which is not aligned properly like it was when it was originally created. Only when the in and out point of the audio and video are manually changed does the merged clip become a unified clip again. (one in and out point referencing both audio and video)
if anyone else can replicate this bugs it would be appreciated.
My clips have been manually synced in premiere, would be interested to see if pluraleyes' behavior is any different, but I don't have access to pluraleyes for Premiere if anyone can test.
CS6.0.2
MacPro 4.1 OSX 10.8.2
Nvidia 4000 for Mac
Cuda 5.0.37
GPU Driver 1.3.4.0
Matrox MXO2 mini with Max

Unfortunately this is not a spanned clip problem with Adobe or Panasonic. This issue does come up from time to time.
Be sure when you pull the card from your camcorder, you LOCK IT immediately. Then it becomes impossible to change anything on the card purposely or inadvertantly (and as you are aware, changing anything - structure, file names, ANYTHING - on the card will blow the whole operation, so locking it is perfect). Also, sometimes Mac users have problems when they fail to lock their cards, because Mac OS immediately starts writing files to the card if it's not locked.
When you're using the Media Browser in PPro, be certain that you are viewing the clips in AVCHD mode (there's a dropdown option for this right there in the Media Browser). If you're importing individual clips from a single continuous recording, you're NOT in AVCHD mode, and this will always cause the problem you are describing.
I don't mean to lay this out as "you're doing it wrong" but unfortunately this is all very well documented at this point, and whenever there is a problem with spanned clips, it is 100% of the time due to a user that renamed something, moved files, or otherwise didn't follow the complete rules of AVCHD management. I don't normally use a term like 100% (tend to prefer 99.9%) but I say 100% because it is absolute in this case.

Preview highlight and shadow clipping mask in second monitor

Hi, I'm new in the forum and just starting with the new LR3. I have a question about to preview highlight and shadow clipping in the second monitor, becouse I can't check the mask clipping in my second monitor as in the LR2... Is there a possibility to change it to preview the mask in the second monitor?
Thanks and regards
Daniel

Yeah, thanks.... but I mean that when you are in develop mode and you try to see the highlight or black clipping mask, red or blue, now in LR3 only appears in the main monitor, not in the second monitor as well like in LR2... Maybe I'm not explaining very well the difference...

Merged clips problem

I have a very odd problem.
Some time ago I started a new project, from the beginning using premiere CC in a mac (not sure the version, but right now I'm at 8.1) with r3d video files (shot on red epic with no audio on AV clips) and wav audio files recorded on an external recorder.
Merging these clips was no problem to begin with, and didn't seem to be buggy or problematic at all.
That was when I was using a mac version of premiere CC.
I came back to the project after switching to a Windows 8 run PC - and all of the sudden my nicely titled merged files are now all buggy and weird - only about half of the video is on those merged clips while the entire audio is there - and I can't right- click on the clips (in the browser) - just nothing happens.
Anyone have a similar problem with merged clips?

...and the lack of good merged clips support was always one of the challenges in persuading other indie editors to switch over from FCP...
I guess they just have to weigh that up against the lack of support they got from Apple for FCP in its entirety.

Merging clips results in several duplicate audio channels/tracks

I am trying to sync my audio and video in Premiere, and something is screwing it up.
I have my video track, that has 2 audio tracks.
Then I have my polyphonic wav file, that has 5 audio tracks.
2+5 = 7, right?
So why is it, when I merge my two clips together, that Premiere decides to create 20 additional tracks for my Merged Clip, totaling 27 tracks?! The majority of them are blank/empty/silent. Why is it doing this?
ORIGINAL FILES SYNCED UP
AFTER - MERGED CLIP ON RIGHT

jdemo177 wrote:
. I used pluraleyes to match the audio, 5D and HVX and then imported a multi cam storyline.
I don't understand this part of your explanation. It's been a while since I've used PE, since FCPX's sync and multicam features work so well.
Why not try a short test – skipping the PE steps entirely. Select two of your clips and let FCP automatically create a test multiclip matching the HVX waveforms with those on the 5D. Open in the Angle Editor – or start a test project and see whether the boom mic track is present.
Russ

Why when I merge clips in Audition CC does the new merge file have no data?

Why when I merge clips in Audition CC does the new merge file have no data? It happens in large projects and once it starts to happen I cannot get merge clips or bounce tracks to work correctly.

files 1 of 2 and 2 of 2 are for all these languages:
Chinese (Simplified)
Chinese (Traditional)
Czech
English
French (Standard)
German
Italian
Japanese
Korean
Polish
Portuguese (Brazilian)
Russian
Spanish
Swedish
Turkish

Strange behavior of merged clips on import

After much troubleshooting I've noticed more strange behavior in the reimport of merged clips from XML...
I have merged clips made out of film transfer and the audio from an aiff file. I can export and xml of a merged clip... all of about 30 seconds and when I reimport the clip from xml it is like 47 minutes long and will not reconnect the audio part of the merged clip. That is actually happening to ALL of my merged clips in a current film project.

Yes, all phones are 111, all faxes are 222 and all mobiles are 333
Please see these images:
Test-Database in Excel:
Export from Excel:
Import into Adress Book:
The result(s) (see the aligning of "Andere" (=phone), Fax and Mobile):

Used "Merge clip" after rough cut, need to replace clips in timeline

I made a rough cut for a sequence I'm working on using just the embedded camera audio from the takes. Now that the roughcut is done I've started Merging the external audio source with the clips.
What I need to know is if it is possible to replace the clips currently in my timeline with the new merged clips without having to go through and re-assemble the entire timeline.
I read somewhere that alt-dragging should give me a green plus sign which I can use to replace the old clip with the new one but I am having no luck with that.

In the Project Panel, click the flyout menu; that's the little stack o' pancakes thing in the upper right corner of the panel. Select "Metadata Display." In the search box, type "usage"--this will reveal the Video Usage and Audio Usage metadata labels. Check those to add them, and hit OK; they'll now be added to the columns in the Project Panel. Now, you can sort on those columns to filter by usage--the unused clips won't have a number associated with that column. Select them all, and if you really want to purge them from the drive, hit Ctrl/Cmd+Delete--that will remove the media from the drive.
If you just want to get rid of the clips, Project > Remove Unused will do that.

How do I make sure that CS5.5 Merge clips encodes Audio at correct volume?

Windows 7 x 64, 2 TB, 12 GB RAM,
I am using the Premiere Pro CS5.5 Trial (full version), particularly because of the new Merge clips feature.
The Merge clips works intuitively and easily; this is a fantastic advantage. I am creating these clips to use in Captivate 5.0.
But, when encoded, the Audio volume has blown out so that it shatters the ear drums.
I am not sure whether this is a PP problem, or an AME 5.5 problem.
A second problem is this with the Merge Clips. In the Project panel, if you check the Duration of a Merge clip (in PP) it shows the original duration even although it has been altered on the Timeline.
If I encode the video clip separately from the Audio, I can adjust the Audio volume in Captivate, but, this:
1) increases the overall file sizes-something I don't want for the web.
2) the video duration and the audio duration do not match, even though they did on the Timeline. This did not happen in CS5.
I know this is a new version, but has anyone any ideas that I might try. I have alread delayed my project waiting for CS5.5 to become available.

Sounds like Media Encoder is actually recording the audio as a stereo file but the audio is panned to one side.
Check that you haven't accidentally panned the audio in the mixer to one side.

Trim mode with merged clips

I'm cutting a feature film on FCP 5.0.4 editing 23.98 NTSC DVCAM. The audio was recorded on a hard disk recorder with independent timecode and the clips were merged using slates.
If I enter trim mode by double clicking on the video track (with the purpose of trimming only the video track) and change the duration by clicking on the +/-1 or 5 frame buttons, the picture will suddenly jump by 5 or 6 seconds and the white "out shift" or "in shift" numbers will jump 5 or 6 seconds as well. Dynamic trimming has the same problem.
However, the actual edit made is correct, it's just impossible to see what frame I'm on without playing it back or getting out of trim mode. If I trim the audio and video tracks together then everything works as it should.
Has anyone seen this problem before? Know how to fix it? I couldn't find anything in the archives.

I created a new user account and trashed my preferences and I have the same problems. I created a new project, and new sequences. Same problems.
It only happens with 23.98 (batch reverse telecined using Cinema Tools) NTSC DV clips that have been merged with separate 24-bit 48 khz Quicktime audio clips (converted from BWF using BWF2XML). Clips that were captured from the tape with audio and video simultaneously don't have this problem. The discrepancies between the actual amounts trimmed and the white numbers in the trim windows are consistent. If it's off by 6:10 on a clip, every time I try to trim that clip it will be off by the same amount. But the number varies from clip to clip. It's generally 5-8 seconds.
If I try to trim only the audio, I don't have any trouble. If I trim the audio and video at the same time I don't have any trouble. It's only when I trim the video on its own. If I use the original video clip before it's merged with an audio track then it trims fine. If I cut the merged clip into a sequence then delete the audio track from the sequence the problem remains.

No three point edit with merged clips in Premiere Pro CC 7.2?

Hello Premiere Folk,
I've recently, as of last night, updated to Premiere Pro CC 7.2. I'm currently cutting a feature using merged 5K red raw clips. We were expereicning some weird things but were able to work around them. The update fixed to major problems we were having;
1. Bloating projects going from 808kb to 5mb for no reason.
2. Not being able to perform a match frame on merged clips.
The update fixed these issues, but don't throw on your party hats just yet. Within this update a fuction CRUCIAL to any editor has been taken away after you've performed a merged clip function... THE EDIT! Any time I make an in and out point in my source with a merged clip and an in and out in my timeline and try to do an insert edit via a hotkey, it just edits the entire clip in the timeline starting with a radnom in point! I was able to set an in and out in my source and just edit into the timeline but even that function has been taken away. Adobe please fix this! Yes the match frame with a merged clip works but dont take away editing basics!

This bug is NOT FULLY FIXED. I'm on a tight deadline so i'm not looking very hard online to see if i'm alone - so please forgive me for just posting here...
I'm using CC7.2.1 it's 1/21... very grateful that match frame FINALLY works on merged clips, but, again, this insert/overwrite bug is only PARTIALLY FIXED.
Insert/overwrite with merged clips on 3-point edit now works, but ONLY when cutting in BOTH merged video+audio... if you're just trying to cut in the audio from a merged clip using a 3-point/4-point edit via hotkey, it's a no-go.
I, for example, needed to re-cut in audio under some video with effects on it. So, I unpatched the video source completely and patched source audio tracks 1-4 to the appropriate sequence tracks. Upon hitting insert or overwrite multiple times, nothing responds. The only way to cut anything in from the source (merged clip) was to patch the source video back into the timeline on an unused video track, then cut ALL the tracks from the source in, I then had to delete the video track re-link the now free audio to the original video. Not a big deal, but annoying enough & waste of precious time on tight deadline.
So, yeah, I have a workaround but is still not appropriate to have a core function not work properly. Especially when I'm working with a very complicated timeline.
That said, thanks for keeping on top of our gripes, Mark.

ADOBE PREMIERE PRO-Merged clips wont link to the Media...please help!

One of my hard drives crashed and it unlinked other media which is on the other hard drive...In Adobe Premiere Pro when I try to link the media it links but the merged clips remain unlinked...I see the picture but no sound. Please help me its a massive project and I'm in desperate need of help. Thanks!

You might want to go read in http://forums.adobe.com/community/premiere/hardware_forum?view=overview
Starting with the FAQ drop down list at the top of the page for many articles/ideas

Merged clip starts 32 seconds in

Similar Messages

Maybe you are looking for