Merged clips audio not playing

Is there a reason why my merged clips no longer play audio?
Also is there a way to batch merge clips? I had to individually sync my whole project one video/audio clip at a time...a little disappointing to do all that work and come back to my project where the audio won't play.

Might be a good idea for a feature request.
Adobe - Feature Request/Bug Report Form
On the not playing issue, I'm sort of stumped.  It's just always worked for me, and it's not an issue I recall seeing reported here by others.
Maybe try recreating the merge?

Similar Messages

  • Online video clips do not play correctly on all browsers

    I am unable to play video clips at the right speed without them stalling and stuttering. For example, a typical YouTube clip will not play correctly, so the video will stutter and the sound won't play in time with the video.
    This is especially frustrating when wanting to play music video clips as the song will stutter. This happens regardless of browser - Firefox, Safari or Netscape.
    I have a broadband Internet connection but wonder whether I need to adjust speed settings somewhere so sound and music play correctly.
    I have no problems playing songs via iTunes or watching video clips using Quicktime, it's just the embedded video clips on YouTube etc that won't play correctly.
    Any advice much appreciated.
    Thanks,
    Rob

    Flash video is very CPU intensive, open activity monitor and look at your CPU usage while trying to watch a YouTube video, no doubt it is at 100%.
    Unfortunately there isn't much you can do about this - my 400 Mhz G3 can't handle flash video and by the look of some previous posts on the forum I'd be surprised if any can .

  • Premiere CC 2014 audio not playing

    Audio not playing in some projects, either in reference mon or timeline, but plays in other projects. 
    Premiere CC latest
    MAC 2.66 Gh i7  8GB RAM  NVIDIA GeForce GT 330M 512 MB
    OSX Mavericks /256GB SSD (P
    1TB HD write disc

    Moving to Premiere forum

  • Audio not played for Motion Background

    I have created a movie in my NLE as a motion background for a menu in Encore 2.0. When I preview the dvd project after rendering the audio plays fine but when I burn to dvd the audio is missing but the motion video still plays.
    Why is this audio not playing on the burned dvd

    In what form is the motion background when you bring it into Encore? Is it an avi? Is it compressed?
    Is the audio stream a separate file?
    If separate, is the audio stream a different length to the video file? Is the audio stream just a .wav file or what?

  • Last ~10% of audio clips do not play

    My imported music tracks will not play the last approximately 10% of the clip.  At first I thought it was a result of trying to use 6-10 minute music clips, as 1-3 minute tracks never seem to fail,  but found that even trimming off all but the last minute of a long clip (making a 10 minute clip into a 2 minute clip) and trying to use that resulted in it's last 10% not playing!
    The waveform for each audio clip shows up in its Source Tab and is just fine.  But scrubbing or playing the clip works only up to about the 90% point and then sound goes silent.  This is true for the Source player or when the audio is inserted into the Timeline.
    I have converted the original .m4a audio files to both mp3 and wma but always with the same result.  All converted clips play fine in both QuickTime and WM Player players, so it is something within CS4 Premier Pro itself that is failing.
    I have tried everything I can think of without results, and have run out of ideas.
    Any suggestions, anyone?

    I agree re: MP3.  I seldom use it, but I fell into the trap of thinking that since I was having problems with the captured CD and WMA, that certainly Premier would handle MP3, the most ubiquitous format around, without problems.
    So I was really buffaloed when even the MP3 formats failed!
    I usually don't do anything in WAV because the files are so large, but that said I have a 1.5 Tb drive so don't know what in the heck I am worried about!
    Thanks again.

  • Merged Clips Audio Issue

    Trying this again, having a major problem since update working with merged clips.  I merge all my video and audio clips in a pre-workflow project in premiere pro.  Just got my footage back from the shoot, labeled and sync'd in the project.
    Because Premiere doesn't allow you to have more than 1 project open at a time, I copied the files, closed the pre-workflow project and opened my feature film project I've been working from.  Copied the merged clips bin, I click on a clip, video plays fine but there's no audio playback.
    I try importing the files from the pre-workflow project using the import project feature, keep only the actual merged clips (as the rest of my project is this way) still no audio.  I have cleaned my media cache, reset preferences, even uninstalled premiere and redownloaded.  Problem persists.
    Can you help me figure out what the issue is so I can get back to making progress on finishing this feature film project?
    The only thing different I've done this time that I didn't do last time was copied the audio into the bin with the video clips and merged that way.  Before was putting video clips into my master audio bin and merging.  But I don't see how this could possibly be the problem.

    Going to try, but here is my workflow and have not encountered any problems until this last P/U days footage.  I've been doing things this way because I found having all files in the project was causing it to crash constantly when I was working.  I have a new I7' processor IMac with 24 gigs of RAM.  And since Premiere does not allow you to have multiple projects open at the same time (Wish this would change.  Avid and FCP both allowed multiple projects) I have to do things this way.
    Pre-workflow Project File
    Label all Video and Audio files to match Scene #'/Takes
    Set in points on all video and audio to reflect slate
    Merge Clips
    Working Project File
    Import only Merged Clips into Project.  Either via import or copy/paste
    Now I've done this workflow from just about the very beginning.  Deleting all of the original source video and all audio clips from my working project so only my bins containing my merged clips remain.  Have had no problems and edit has been smooth.  Did a pickup day last week, followed same steps as I've done in the past, imported the merged clips into my working project and the clips have the audio set to none by default.  Now once I go into the sequence I can manually set it and it's there but I cannot play audio in the source monitor which is how I edit, there's no reason I should have to go back to the crappy FCP way of editing doing the copy and paste from a sequence.

  • Audio not playing in CC 2014

    Hi all,
    I have seen a few threads with the problem I am having, but not exactly.  And still no solutions.
    So often, like 3-4 times a day when I open an existing project or even start a new one the audio will not play from any of the clips I am using.  This happens both in the timeline and in the source viewer.   I can see the waveforms, I can see he meters going, just can't hear anything
    Here's what I have done:
    Checked audio hardware in PP and on my system.  Audio plays fine out of the system and the audio hardware is set to the correctly.
    Changing the audio hardware output does not help.  I use a Bose Speaker system, but changing to internal speakers does not help.
    I am waiting the required time to allow the project to conform.
    The problem arises in every clip in the project, which include a number of different sources.
    I have trashed preferences in PP.  Did not help.
    The only way I can get it to work is to reboot, and even then that does not always work.  Sometimes I have to reboot a few times.
    SYSTEM
    10.8.5
    MacPro 2x2.66GHz 6-Core Intel
    Current version of Premier Pro CC 2014
    Any suggestions would be appreciated.  Thanks.

    I'm having an issue where some of or all of the audio tracks just drop out during playback (green bar). I have to stop/start the playback and all is fine until the next random time it does it.

  • Insert a clip into a new sequence, the clip will not play back

    Macbookpro 8G ram twin 2.5 Intel, 1333 Mhz
    I am an experienced editor coming over from AVID.  This is my second project attempt in Premiere. First was fine. I imported clips that live on my hard drive.  When I make a clip selection, mark the in and out and "insert into a new sequence, the sequence will not play back un less I render it first. I am talking about one (1) shot maybe 3 seconds long.  I have done no other edits in the sequence and have added no effects but there is an effect icon on the clip in the sequence,  This can't be right. It is not the way it worked for my first test project.  It would take 40 hours to edit a 60 second spot…  What has happened here?
    Footage is 1080p 24fps.  Short with a digital DSLR and Files are the same (.mov)  as in the first project,

    I have exactly the same problem. All of a sudden preview window is not working properly. In some projects it only plays audio with gray screen, in some it doesn't plays at all or plays audio from another projects. Sometimes preview gets frozen with the first frame in the project. I can however play video from Event Library, but without any sound. When I create new project and drag clips from Library, it plays with gray screen and again without sound. Restarting iMovie or Mac is no help. I'm using iMovie 8.0.6
    Waiting for help desparatly, thank you

  • Voice Over Audio Not Playing

    iMove crashed and after restore voiceover audio and any new audio recorded does not play. I can see the wave form there but no audio plays from it. Same with music track.
    How do I recover my audio tracks? 

    SOLVED
    Found ONE short audio voiceover that showed a yellow triangle. I removed it and the whole projects audio was restored.
    Really stupid that one bad clip takes out all the audio in a project. 

  • Captivate 4  TTS Audio not playing in published or preview ok in edit

    While viewing my project in published view, audio did not play on 5 of my 70 slides. (It worked fine previously). It played Ok in edit but no sound in preview or published. I tried to replace the audio using the Convert TTS button, and the audio would not replace the previous audio. Even removing the audio and dragging the new audio to the timeline would not work.  I reinstalled Captivate 4 and TTS, and it seems to work fine on new a new projects but I can not seem to get it to fix my current project.  Can anyone advise if I can fix those slides, or have I somehow corrupted those slides? It's a big project.  Thanks in advanced

    If I ever see dodgy behaviour like this on a slide, and it doesn't resolve easily with a reboot or republish, I just recreate the slides and delete the old ones.  It's often far quicker to do this than muck around trying to fix them.  If there is corruption in a slide, you don't want it anywhere in your project.

  • Audio not playing in mov format K'08

    Ive seen a lot of threads but none had a solution to this.
    With the slides, I included an mp3 from within itunes
    dragged it from the media window into the documents soundtrack box
    clicked looped
    and played just fine throughout the manual presentation.
    clicked export to .mov
    checked include audio files
    when the mov plays it is silent.
    I tried one workaround, using the newly recorded audio file reimported into keynote 08 and exported again - still silent
    has anyone figured out how to get the audio to play in .mov?
    thanks

    Believe it or not, I've been having this same problem since I bought my Imac G5 a few years ago. It just happened to my MacBook Pro, as well. Along with the fact that mpg audio is gone, so is flash audio. It seems to happen every so often, usually after one of my computers hang while loading a preview for a flash movie. The problem actually seems to correct itself after a few restarts, or loading of some programs.
    In the process of writing this post, I regained support for mpg audio, and flash audio - and in quicktime player for that matter. When I started writing this, it didn't work. I dunno, quicktime is weird that way. The longest time I was without flash or mpg audio was for a period of 3 weeks. After which, it somehow was magically there again. I wish that wouldn't happen, as it usually happens at the most inconvenient times. The whole way flash is not supported through newer versions is rather irritating as well isn't it? Use SAFlash player for mac for those if you can: http://www.adobe.com/support/flashplayer/downloads.html
    (sorry a little off topic there)
    MacbookPro17"   Mac OS X (10.4.7)   Imac G5, PowerMac G3, Mac LC

  • QuickTime movie made in QuickTime 7 audio not playing back in qt 10

    I made a qt using qt 7 pro, H.264 with the AAC audio compressor and that qt will not play back audio in QuickTime 10 which is what my client has on his computer.

    The point being here is that I rendered out a movie in QuickTime pro 7 and the audio isn't being resolved in QuickTime 10, even on my own computer.
    Does the audio play correctly in the QT 7 Player? Have you determined if this is a playback or a conversion problem? I asked about the source file since some source compression formats will not convert the audio using QT 7 Pro. In a similar manner, some AAC data rate and sampling rate combinations are not supported on the Mac which is why QT is programmed to disallow their use. (Unfortunately, I do not know what would happen if a source file using such audio settings were to be used as a source for a QT 7 Pro conversion.)
    How is this possible and should I just remove qt10 altogether?
    As already indicated, there are a number of "normal" problems that could give these results. In addition, QT changes made as part of the most recent Lion OS update seem to have had adverse effects on QT 7 Pro features (as evidenced by the loss of the "loop" playback feature and "green screen" problems on some platforms). As to the removal of QT 10, the embedded structures cannot be removed without corrupting the operating system. And, while the QT X player can be removed/deleted, why bother since you can just as easily opt not to use it for manual playback and restoring it, should you later change your mind, may present a problem.
    I am a professional editor, have been working on Macs since 1992 (Avid and FCP7) and have never had a compatibility problem like this before within the Mac environment.
    Have you made any recent changes to your normal work flow that might account for this problem and is the problem consistently repeatable?

  • Embedded Audio not playing - Flash Player 10.0.45.2

    Hi
    With the recent update of the Flash player I noticed that random *.swf files containing just embedded *.wav files will not play.
    The only things that seem to fix this problem are;
    Change the audio publish settings and republish
    Or createa new *.fla and republish
    Can anyone explain why this is happening? Is this bug temporary?
    Thanks,
    Joseph

    Hi, the Flash forum was down in my area. Here is a link that you may just bookmark as it most likely have everything FP, just something to keep handy:
    http://www.adobe.com/devnet/flashplayer/articles/flash_player_admin_guide.html
    This is the FP Installer for Internet Explorer that you download to and run from your Desktop:
    http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe   (Not the debugger version)
    This is the FP Installer for Firefox(or other browsers that FP supports) Download to the Desktop & run from there.
    http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player.exe
    When that Uninstaller was used for the 10.1, if I'm not mistaken it Uninstalls FP from all browsers.
    I'm sure you are familiar with the ActiveX Settings and using the Administrator account to have the permissions to Install the ActiveX Control and write to the Windows Registry. Adblock in FF will need to be disabled if you use it and any pop up blocker software installed. You may want to refer to the Uninstall instructions for further info:
    http://kb2.adobe.com/cps/141/tn_14157.html
    You may also want to review the Troubleshooting guide to head off any issues before rather than after:
    http://kb2.adobe.com/cps/191/tn_19166.html
    Usually I cover the "prep" info but since we didn't discuss that, thot I'd post it, so if you need it you have it.
    If you have any questions, just post. If you want the debugger version, I'll need to find the link.
    Thanks,
    eidnolb

  • Part of in project entered video clip does not play.

    Much to my surprise certain video clip parts entered in a project do not play at all.
    Instead the same clips previous part gets frozen!!
    I tried not to have any theme and it still happens.
    Is this a known issue? IMovie 09
    Clogz14

    Thanks, Old Toad,
    I know what you are referencing. I just never go to that folder but that is where I do publish the site prior to uploading it onto the internet using the FTP.
    And, it is when I have published the updated pags to the the Local Folder, the video plays perfectly well.
    Soooo, it must be all about restricted bandwith that I am currently using with my domain web host ISP, which is a shared bandwidth. Economics affect me as a volunteer therefore cannot afford the higher speed which is not a shared bandwith.
    To add to my demise, I have issues with signing on to YouTube through my Google account. Try to sort that one out is impossible. Tried for hours but all to no avail to get signed in. So I can't upload my videos which is too bad for my website.
    Will chat further with my domain host and see what other options are available to me.

  • Issue of Audio not playing in IOS still here with EA 2014.1.1

    Edge Animate. No audio when viewed on my ipad and galaxy android. Just like previous discussion that I found. It appears audio worked fine in previous version but not now. Adobe often goes backwards with updates. App gets worse not better. Hey guys, first do no harm.
    I tried coding work arounds but  no progress.
    Is this being work on in the next Edge update?
    Also: how can I make the audio stop playing when the view goes on to another page?

    Dew,
    Can you verify that include audio is checked on the Project:Publish Settings dialog in the Preferences dialog accessed using the button on the Publish Dialog?
    --Allen

Maybe you are looking for