Merged gradient - how to separate the gradient from the background

I created a new layer and filled a colour. Then I created another layer and made a circular gradient in black with multiply option. Now i can move the gradient to any position. Then I flattened all the layers. I saved it as jpg. Now i want to bring back those two layers with multiply option from that saved jpg. how to make it?

If you could create the gradient again in perfect alignment with what you did before, you *might* be able to recover some of the original image data, but in general you're not going to be able to get an acceptable image back as the data will be degraded - possibly badly. You might be best off just to start over with a new image and gradient.
But I may have misunderstood... Is there an actual photo at all involved in this anywhere, or do you just have a solid color with a gradient?
-Noel

Similar Messages

How to replace the background in cs3?

I have had unsuccessful attempts to mask the subjects against the black background (following this to mask the subject: http://www.scottkelby.com/blog/2009/archives/5384).
I couldn't select just the black background as subject's hair is also in black color.
How to separate the background in these situations?

Along with the excellent tips above, two things that might help you create your Mask would be to explore the Channels in Lab Mode (Image>Mode>Lab Mode), as there is different info in those Channels. Also, I have used Image>Adjustments>Highlight & Shadow on a dupe Layer (Ctrl+J) to get more separation between the hair and the background. Use that to "see" the areas that you need to include in the Mask, or delete from the Mask. When done, just Delete that adjusted Dupe Layer, as it's only for you to "find" the edges of the hair.
Good luck, and be patient. The time that you take will pay off with a great Mask. Those are part art, part science and an investment in time.
Hunt

How to separate content area from the image area in cs6

how to separate content area from the image area in cs6? looks just fine in design view but when opened up in explorer my text /content area is over the image area. the content is suppose to be below the image not over it. How do I move it down? Everything I have tried has not worked ;(

Is your image in the CSS (background) or the HTML (foreground)?
Try copying and pasting this code into a new, blank document. Change placehold.it images to your own. Save and preview in browsers.
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>HTML5 with CSS 2-Col Layout</title>
<meta name="viewport" content="width=device-width, initial-scale=1">


<style>
/**CSS Reset**/
    padding: 0;
    -webkit-box-sizing: border-box;
    -moz-box-sizing: border-box;
    box-sizing: border-box;
img {
    width: 100%;
    vertical-align: baseline;
/**Layout**/
body {
    padding: 0;
    width: 90%; /**adjust width in px or % as desired**/
    margin: 0 auto; /**this is centered**/
    background: #CFF;
    color: #505050;
    font-family: Segoe, "Segoe UI", "DejaVu Sans", "Trebuchet MS", Verdana, sans-serif;
    font-size: 100%;
    box-shadow: 2px 2px 4px #333;
header {
    margin: 0;
    padding: 0 1%;
    width: 100%;
    background: #B00202;
    color: #FFF;
/**top menu**/
nav {
    background: #EAEAEA;
    font-family: Gotham, "Helvetica Neue", Helvetica, Arial, sans-serif;
    font-size: 14px;
    font-weight: bold
nav ul {
    margin: 0;
    padding: 0;
nav li {
    list-style: none;
    display: inline-block;
    margin: 0 3% 0 5%;
/**menu link styles**/
nav li a {
    color: #666;
    text-decoration: none;
    line-height: 2.5em;
    padding: 6px;
    border: 1px solid #CCC;
/**on select or mouseover**/
nav li a:hover, nav li a:active, nav li a:focus {
    background: #CCC;
    color: #505050;
#wrapper {
    background: #EAEAEA;
    overflow: hidden; /**float contaiment**/
/**main content**/
article {
    padding: 0 2%;
    background: #FFF;
    float: left;
    width: 70%;
figure {
    width: 80%;
    margin: 4% auto 4% auto;
    text-align: center;
/**right sidebar**/
aside {
    padding: 0 2%;
    float: left;
    width: 30%;
footer {
    clear: both;
    background: #B00202;
    color: #FFF;
    text-align: center;
    margin: 0;
/**typography**/
header h1, header h2 {
    display: inline;
    color: #F5DD83;
    padding: 0 1%;
h3 {
    color: #2294AE;
    margin-bottom: 0
p { margin: 0 0 1em 0 }
figcaption {
    text-align: center;
    font-style: oblique;
    font-size: small;
    color: #2294AE;
</style>
</head>
<body>

<header> <h1>Sitename</h1>
<h2>| Responsive CSS Layout</h2>
</header>

<nav>
<ul>
<li><a href="#">Menu Item1</a></li>
<li><a href="#">Menu Item1</a></li>
<li><a href="#">Menu Item1</a></li>
<li><a href="#">Menu Item1</a></li>
<li><a href="#">Menu Item1</a></li>
</ul>
</nav>
<div id="wrapper">

<img class="banner" src="http://placehold.it/1056x100/198EBA/FFFFFF&text=Banner.jpg" alt="banner" />
<article> <h3>Article</h3>
<p>Lorem ipsum dolor sit amet, consectetur adipiscing elit. Mauris vitae libero lacus, vel hendrerit nisi! Maecenas quis velit nisl, volutpat viverra felis. Vestibulum luctus mauris sed sem dapibus luctus. Pellentesque aliquet aliquet ligula, et sagittis justo auctor varius. Quisque varius scelerisque nunc eget rhoncus. Aenean tristique enim ut ante dignissim. </p>
<figure> <img src="http://placehold.it/500x325" alt="placeholder">
<figcaption>Figure 2 Caption</figcaption>
</figure>
</article>

<aside> <h3>Aside</h3>
<p>Lorem ipsum dolor sit amet, consectetur adipiscing elit. Mauris vitae libero lacus, vel hendrerit nisi! Maecenas quis velit nisl, volutpat viverra felis. Vestibulum luctus mauris sed sem dapibus luctus. </p>
<hr>
<p>Pellentesque aliquet aliquet ligula, et sagittis justo auctor varius. Quisque varius scelerisque nunc eget rhoncus. Aenean tristique enim ut ante dignissim. </p>
<hr>
<p>Pellentesque aliquet aliquet ligula, et sagittis justo auctor varius. Quisque varius scelerisque nunc eget rhoncus. Aenean tristique enim ut ante dignissim. </p>
</aside>
</div>

<footer> <small>© 2014 Your Site Name. All rights reserved</small> </footer>
</body>
</html>
Nancy O.

How to separate perticular column from multidimensionl array

dear all,
i am just reading CAN bus message, problem is that it is accomodated in a 11X7 array which includes frame time stamp, ID, byte length etc but i am interested in CAN data. can anybody tell me how to separate that column from all. i want to read a column of 5 with all rows. how it is possible.

Hello Sanjay,
If your requirement is simply to obtain a single column from a 11x7 array, I would suggest you should do the following:
1. Use Transpose 2D array to obtain a transposed array
2. Use Index Array function to retrieve invidual row (which is actually the column of non-transposed array).
Use index value of 4 (zero indexed), and the output would be a 1D array containing all elements of column 4 (zero indexed) of the original array.
I hope this helps.
Regards,
Navjodh

How to separate the Webi executing duration

Dear experts,
I'm running a webi report connected to backend BW via universe. Any idea on how to separate the webi executing duration into BO side part, BW side part?
Thanks,

Hi Hong ,
*The overall runtime can be split into 5 different parts (Database, OLAP, MDX, RFC and
WebIntelligence) .
*We have to gather the statistics in the SAP BW system. Use transaction SE16 (Data Browser)
and go to table RSDDSTAT_OLAP
*Enter User name and UTIME and calendar date object name (Bex query)
*Press the execute button and you will get the table with all the statistics in SAP BW. Now, you
have to separate the backend runtimes into database, OLAP and MDX runtime.
*Gathering the Database Runtime
Click on the header of the column “EVENTID” to mark the whole column. Set a filter by pressing
and select the between range from 9000 to 9011.
*Gathering the OLAP Runtime
Click on the header of the column “EVENTID” to mark the whole column. Set a filter by pressing
and select the between range from 2500 to 4999.
*Gathering MDX runtime
Click on the header of the column “EVENTID” to mark the whole column. Set a filter by pressing
and select the between range from 40000 to 40036.
*Gathering the Single Statistical Records STAD
To get the memory consumption, Remote Function Calls (RFC) and the details about all the BAPIs
called during report execution, we need to enter transaction STAD in SAP BW.
When starting STAD, set a filter on the connection user for the Universe and select the appropriate
start time and the length of the interval to be investigated (according to the total runtime of the report).
This will return a set of RFC calls to the backend. Normally, the major runtime influencing part can be
easily determined by the column “Response time (ms).
Subtract all this times from Webi report refresh time , we get time taken at BO end.

How to separate the music by tracks language

I appreciate if someone tells me how to separate the music on my iPod by tracks language, example: English, Spanish, etc. I only find classification by Genere, not by language, Thanks

I cannot thank you enough!
you have saved me much frustration.
thanks for taking the time to answer and have a great day!!

How to Separate the Instances?

Hi All,
Please let me know How to separate the instance (CI & DB in one Cluster and DI in Failover )
Thanks in Advance,
Jayakumar C

Hi ,
Can you please explain the present scenario. Is your SAP running in clusture? do u have 2 seperate boxes for Primary and Failover and now you want to run all services in primary and you want your FO to act as a DI?

How to schedule the background job daily twice?

Hi,
How to schedule the background job daily twice? any conditions?
Regards,
Srihitha

see the step by step procedure.
Scheduling Background Jobs:
1. Background jobs are scheduled by Basis administrators using transaction SM36.
2. To run a report in a background, a job needs to be created with a step using the report name
and a variant for selection parameters. It is recommended to create a separate variant for each
scheduled job to produce results for specific dates (e.g. previous month) or organizational units (e.g.
company codes).
3. While defining the step, the spool parameters needs to be specified
(Step-> Print Specifications->Properties) to secure the output of the report and help authorized users
to find the spool request. The following parameters needs to be maintained:
a. Time of printing: set to Send to SAP spooler Only for now
b. Name abbreviated name to identify the job output
c. Title free form description for the report output
d. Authorization a value defined by Security in user profiles to allow those users to access
this spool request (authorization object S_SPO_ACT, value SPOAUTH). Only users with matching
authorization value in their profiles will be able to see the output.
e. Department set to appropriate department/functional area name. This field can be used in
a search later.
f. Retention period set to Do not delete if the report output needs to be retained for more
than 8 days. Once the archiving/document repository solution is in place the spool requests could
be automatically moved to the archive/repository. Storage Mode parameter on the same screen
could be used to immediately send the output to archive instead of creating a spool request.
Configuring user access:
1. To access a report output created by a background job, a user must have at
least access to SP01 (Spool requests) transaction without restriction on the user
name (however by itself it will not let the user to see all spool requests). To have
that access the user must have S_ADMI_FCD authorization object in the profile with
SPOR (or SP01) value of S_ADMI_FCD parameter (maintained by Security).
2. To access a particular jobs output in the spool, the user must have
S_SPO_ACT object in the profile with SPOAUTH parameter matching the value used
in the Print Specifications of the job (see p. 3.d above).
3. Levels of access to the spool (display, print once, reprint, download, etc) are
controlled by SPOACTION parameter of S_SPO_ACT. The user must have at least
BASE access (display).
On-line reports:
1. Exactly the same configuration can be maintained for any output produced
from R/3. If a user clicks Parameters button on a SAP Printer selection dialog, it
allows to specify all the parameters as described in p. 3 of
Scheduling background jobs section. Thus any output created by an online report
can be saved and accessed by any user authorized to access that spool request
(access restriction provided by the Authorization field of the spool request
attributes, see p. 3.d of Scheduling background jobs section).
Access to reports output:
1. A user that had proper access (see Configuring user access above) can
retrieve a job/report output through transaction SP01.
2. The selection screen can be configured by clicking Further selection
criteria button (e.g. to bring Spool request name (suffix 2) field or hide other
fields).
3. The following fields can be used to search for a specific output (Note that
Created By must be blank when searching for scheduled jobs outputs)
a. Spool request name (suffix 2) corresponds to a spool name in p. 3.b in
Scheduling background jobs section above).
b. Date created to find an output of a job that ran within a certain date range.
c. Title corresponds to spool Title in p. 3.c in Scheduling background jobs
section above).
d. Department - corresponds to spool Department in p. 3.e in Scheduling
background jobs section above).
4. Upon entering selection criteria, the user clicks the Execute button to
retrieve the list of matching spool requests.
5. From the spool list the user can use several function such as view the
content of a spool request, print the spool request, view attributed of the spool
request, etc. (some functions may need special authorization, see p.3 in
Configuring user access)
a. Click the Print button to print the spool request with the default attributes
(usually defined with the job definition). It will print it on a printer that was
specified when a job was created.
b. Click the Print with changed attributed button to print the spool request
with the different attributes (e.g. changing the printer name).
c. Click the Display contents button to preview the spool request contents. A
Print and Download functions are available from the preview mode.

How to schedule the background job using current selection screen field val

Hello Friends,
How to schedule the background job using current selection screen field values.
after completion of the job the spool should be sent as a mail to SAP Inbox.
Is there any way to create the variant dynamically by reading the current selection screen values.
Thanks,
Ravi

Hi,
To get the variant details you can use teh following FM.
'RS_VARIANT_CONTENTS'.
Regards,
Ankur Parab

How to change the background color of a single row

Hi OTN,
I am using JDeveloper 11.1.1.2 with ADF faces in view layer.My issue is How to change the background color of a single row in af:table ?.

How to highlight ADF table row based on column value?
Found by searching

How to change the background color of a desktop??

any ideas how to change the background color of a desktop?? Now the default color is blue. I couldn't fine the API in JDesktopPane on doing that..
JDesktopPane desktop = new JDesktopPane(); //(textArea);

Try the method setBackground. For me it's work.

How to stop the background job "Sap_collector_for_job_statistic"

Dear All,
Kindly let me know how to stop the Background job "Sap_collector_for_job_statistic" which is running everyday.
We want to stop this background job.
Kindly suggest.
Regards,
Mullairaja

Select the Job using SM37 transaction. In the Menu Choose
Job ---> Cancel Active Job.
Before you do this it may be good idea to check the pid using SM50.
It will be using a Background work process. Check the pid and the status.
Select the same and in the Menu Choose Process --> Cancel with Core.
Refresh and check in SM37 for the Active and Cancelled Jobs.

How to debug the background job in ABAP

Hi Guys,
Can anyone let me know how to debug the background job in ABAP.
Thanks in advance
peter

Hi,
Goto SM37 and see the log if any is there and based on that you can check the code.
you can't debug background job.
Create a Variant for the Program and
Schedule JOB in background:
Go to SM36 create a Job
enter Program and Variant for that program in STEP..
click on Start Condition
Click on DATE and TIME enter date scheduled Start and END times
click on Period Values
Click on HOURLY/WEEKLY etc
CLick on RESTRICTIONS also to use further criteria.
so your job will be scheduled and run as per your requirement.
and in SM37 Transaction check the status of that JOB
Check this link for scheduling jobs..
http://help.sap.com/saphelp_nw2004s/helpdata/en/c4/3a7f87505211d189550000e829fbbd/content.htm
Check this
http://jplamontre.free.fr/SAP/Debug%20background%20process.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/abap/abap+debugger&
Regards,
Padmam.

How to color the background of a text line in mail

How to color the background of a text line in mail
The forum has a message dated 2005 that this cannot be done, has the recent OS made this a feature.
I still caanot seem to see any where it is available.
Thanks
Greg

greg1424 wrote:
Does pages do that?
Yes.
I also have Office for MAC but rarely use it as it is too cumbersome for me.
Microsoft Office does it also. So does Libre Office, Open Office and just about any full function word processor app.
Dan

How to put the background image in Title Window?

Hi,
I'm newbie in flex. I 'm using Flex 4.
Can anyone give me some guidelines on how to put the background image in Title Window?
Is it possible to do this?
Thanks.

Hi,
Check the below sample code
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
               xmlns:s="library://ns.adobe.com/flex/spark"
               xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600">
    <fx:Declarations>
        
    </fx:Declarations>
    <fx:Style>
        @namespace s "library://ns.adobe.com/flex/spark";
        @namespace mx "library://ns.adobe.com/flex/mx";
        s|BorderContainer {
            background-image:Embed(source="image/wheres_the_green_rez.jpg");
            background-image-fill-mode:clip;
    </fx:Style>
    <s:TitleWindow width="100%" height="100%">
        <s:BorderContainer width="100%" height="100%"/>
    </s:TitleWindow>
</s:Application>
Regards,
Anitha

How 2 set the background color in j2me

Can any body tell me how to set the background color to midlet.??

if you are using Screen then you can call its setBackColor()
or if you are using Canvas then you can call
g.setColor(r,g,b);
g.fillRect(0,0,getWidth,getHieght);
where g is the Graphics instance of Canvas,for further information consult documentation

Merged gradient - how to separate the gradient from the background

Similar Messages

Maybe you are looking for