Merging 8 Flash Files

Hi,
There are 8 different flash files and all these flash files are being merged to a single PPT and this merged PPT is being sent for Users. As this involves repeated tasks, now there is a requirement to merge all these files to single dashboard. Each dashboard is having Panel Containers and there are many charts, tickers etc.
1. Is this possible to merge all these 8 different dashboard? How Can I merge? I assume the performance will be affected as there will be multiple connections. Any tips to have same performance after merging (as LO connections will be more tah 8)
2. I am thinking of using Next/Previous button options to link various dashboards, if first one fails. Which button to use to give link to another dashboard.
Could you please help
Regards, Nanda Kishore.

Hi Nanda,
It is very well possible to merge 8 separate dashboards into a single dashboard. Rather I would suggest you to call those dashboards into your main one (with the help on Image component or SWF loader with some workaround ). use a play control to give ti a dynamic display or use a next and previous button to navigate. Only problem with this approach is that every time you change it to next it will reload again (this might be annoying). To avoid this you can load all of the dashboards to separate image components an show or hide dip-pending on the value of the play-control or the button used for transition. Benefit is that it wont load again and again rather it will load all the dashboards at once, so initially it will take some time. See which one is the best possible solution for you.
As you said you can use buttons to dynamical display and hide the components or use the standard play control for the same.
Let us know if you need further clarification.
Good Luck.

Similar Messages

Merging Flash Files

Hi, don't know if anyone can help!
I have three flash files that I need to link together to
create one flash file.
Any ideas?
Any help would be gratefully received!

I would search help docs or google or this forum or
kirupa.com or gotoandlearn.com for *loadMovie* -
it is exactly what you want. www.kirupa.com has a few
different tutorials with source files that
explain all there is to know :)
-c
~~~~~~~~~~~~~~~~
--> Adobe Certified Expert
--> www.mudbubble.com
--> www.keyframer.com
~~~~~~~~~~~~~~~~
Pistachiouk wrote:
> Sorry, I wasn't very clear! But thanks for the help so
far!
>
> I have three files. An introduction, a main area and a
sub area. Because these
> are files that have already been created, I want to run
the introduction into
> the main area, then when clicking a button on the main
area be taken to the sub
> area and back again!
>
> I can get them linking but they open a new window in a
browser, not the flash
> player!
>
> Any ideas?
>
> I have some knowledge of actionscript, but I could do
with some pointers!
>
> Thanks alot.
>

Importing pdf files in flash pro which contains 3D data and merging those files to make an animation? Is it possible with Adobe Flash Pro?

Hello, Can anyone tell me if it is possible to merge pdf files which contain 3d data to make an animation with Adobe flash professional? Is there anyway to do this? Please guide me on this.
Thanks,
Pratiksha

Hi pratnat,
Sending this tutorial your way Adobe Edge Animate - Edge Hero Lesson 1 - 3d Objects - YouTube
Thanks,
Preran

Merge Flash Player Skin with Flash Video for Single Flash File

My company uses a content management system for it's website and I am the administrator. The CMS does not require or use html code. I am a new to Flash, but I am able to produce some simple files. I have compiled a simple 2 minute video clip that I need to upload to my companies website. The Flash file requires a player skin which I was able to produce. I understand that when you output to Flash, two files are created. As I understand it, one file is for the skin and the other is for the movie along with the html code that links the two. Unfortunately, our content management system does not recognize the link between these two sets of files and I am unable to import them. I can import the flash movie clip without the player, but that does not suit my needs. I can import the player skin without the movie, but there would be no point. Is there a way to output both files into a single Flash file with the player skin embedded into the Flash movie? I have the full Adobe Master Suite CS4, is it possible another program could be used for that purpose or is this an impossibility? Any information you could provide would be appreciated...thanks...

My company uses a content management system for it's website and I am the administrator. The CMS does not require or use html code. I am a new to Flash, but I am able to produce some simple files. I have compiled a simple 2 minute video clip that I need to upload to my companies website. The Flash file requires a player skin which I was able to produce. I understand that when you output to Flash, two files are created. As I understand it, one file is for the skin and the other is for the movie along with the html code that links the two. Unfortunately, our content management system does not recognize the link between these two sets of files and I am unable to import them. I can import the flash movie clip without the player, but that does not suit my needs. I can import the player skin without the movie, but there would be no point. Is there a way to output both files into a single Flash file with the player skin embedded into the Flash movie? I have the full Adobe Master Suite CS4, is it possible another program could be used for that purpose or is this an impossibility? Any information you could provide would be appreciated...thanks...

[svn] 2395: Merging Flash Player 10 Beta 2 SWF support to 3.0.3' s swfutils library.

Revision: 2395
Author: [email protected]
Date: 2008-07-08 15:51:08 -0700 (Tue, 08 Jul 2008)
Log Message:
Merging Flash Player 10 Beta 2 SWF support to 3.0.3's swfutils library.
QE: Yes, keep an eye out for any changes. None are expected, this is just basic swfutils support for encoding/decoding SWF 10 files.
Doc: No
Checkintests: Pass
Reviewer: Jono
Bugs:
SDK-16034
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-16034
Modified Paths:
flex/sdk/branches/3.0.3/modules/swfutils/src/java/flash/swf/TagDecoder.java
flex/sdk/branches/3.0.3/modules/swfutils/src/java/flash/swf/TagEncoder.java
flex/sdk/branches/3.0.3/modules/swfutils/src/java/flash/swf/tags/PlaceObject.java
flex/sdk/branches/3.0.3/modules/swfutils/src/java/flash/swf/tools/SwfxParser.java
flex/sdk/branches/3.0.3/modules/swfutils/src/java/flash/swf/tools/SwfxPrinter.java

Hi, Sometimes users with understanding of what Adobe programs you are using will post. It doesn't happen very often.
If you had a personal computer and had problems with Flash Player then of course this Forum would be where it would be addressed.
Flash Player is used with all of the Adobe programs and when those programs are involved, then those Forums relate to Flash Player from those perspectives. Flash Player is not a standalone, that would be the Projector. Neither is Flash Player unrelated to the Adobe programs you use.
These terms: fast switching the slides, the player crashes in cases, when a progressive videostream is canceled, Tweener, the gui for the volume control before the gui is initialized, so the player try to access a null reference. It is for me impossible to develope content
told me clearly that your issue involves much more than Flash Player, debug or not.
If you can see the animation at this site and the correct version of Flash Player is displayed, then Flash Player is Installed correctly and should be working. If not, then since I'm not versed in the programs you are using and possible conflicts, I would not be the one to assist you. So your choice is to wait here on this Forum for someone that can, or take my advice and start a thread on one of the other applicable Forums.
Also you have a Mac. We have more threads that the Mac users put up than Mac helpers:-)
http://www.adobe.com/software/flash/about/
Thanks,
eidnolb

Error while using Image component to display a child flash file

Hi
I'm using Xcelsius version 4.5. I used the "Image Component" to import a child flash file(.swf) into the parent flash file.
I gave the path "D:\246024\Loblaw\Dashboard Docs\New Folder\trend input.swf" in the general tab of the image component.
After exporting the .xlf into a flash file , it works fine in the system in which i created it. If i open the same flash file in any other system the parent file opens but the child flash file imported through the image component is not displayed.
Please help me out in solving this issue
Thanks
Anitha

yes, you will face the same problem as its still looking for the path of the swf.
you need to have the SWF on specific location which is accessable by the Parent SWF
usually web page or something which is accessable for all.
good luck

Creation of flash file from Device Central failing

Hi,
I'm currently trying to create a new flash document from Device Central and the application is throwing the following error:
Cannot create new document. The xfl template document is either missing or corrupted.
I am also unable to test my flash files in Device Central via Test Movie.
This function was working fine until a couple of days ago.
Has anyone had any similar issues? I am running Master Collection CS5.5 for Mac.
Any assistance would be appreciated.

For anyone who has this problem in the future, I have managed to get it working again by doing a complete reinstall of Master Collection.

How do i link a flash file to a web site in dreamweaver 8

This is a multi-part message in MIME format.
------=_NextPart_000_0059_01C7A541.7942B2A0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Hi
How do i link a flash file to a web site in dreamweaver 8
Thanks
------=_NextPart_000_0059_01C7A541.7942B2A0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0
Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.6000.16448"
name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial
size=3D2>Hi</FONT><FONT face=3DArial =
size=3D2></FONT></DIV>
<DIV><FONT size=3D1>
<P><FONT size=3D3>How do i link a flash file to a
web site in =
dreamweaver=20
8</FONT></P>
<P> </P>
<P><FONT face=3DArial =
size=3D2>Thanks</FONT></P></FONT></DIV></BODY></HTML>
------=_NextPart_000_0059_01C7A541.7942B2A0--

In Flash. There is no way to apply an HTML link to a swf
file.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Dave" <[email protected]> wrote in message
news:f3s8f0$cla$[email protected]..
Hi
How do i link a flash file to a web site in dreamweaver 8
Thanks

How do I use text to open two different flash files?

Basically I want to use a flash file, which requires you to enter text and a button to click. If I typed in 'Movie 1' and clicked enter, it should take me to 'Animation 1.swf', if I typed in 'Animation 2' it should take me to 'Animation 2.swf'.
I don't have the time to relearn flash completely even though I want to, I haven't used flash in about 3 years and really struggling to remember anything, hate being a novice
Thank you so much

Hi ,
As Ned suggested you could use something like this -
function startLoadingSwf()
var mLoader:Loader = new Loader();
var mRequest:URLRequest = new URLRequest(<name of the swf which you are picking up from the text field - text_field.txt>);
mLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, onCompleteHandler);
mLoader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS, onProgressHandler);
mLoader.load(mRequest);
function onCompleteHandler(loadEvent:Event)
addChild(loadEvent.currentTarget.content);
function onProgressHandler(mProgress:ProgressEvent)
var percent:Number = mProgress.bytesLoaded/mProgress.bytesTotal;
trace(percent);
startLoadingSwf();
Hope that helps!
Thanks and Regards,
Sudeshna Sarkar
Adobe Flash Professional Team

Problem with Flash file in IE

Hello Everyone,
I have a strange problem and I'm not sure exactly what it is.
I have a 1.5 Joomla site with this module in it
<object height="20" width="1035">
<param name="movie" value="LEDDisplayTicker-1040.swf" />
<param name="wmode" value="transparent" />
<param value="high" name="quality" /> <embed height="20" width="1035" wmode="transparent" src="LEDDisplayTicker-1040.swf"></embed> </object>
The site works fine in Chrome, FireFox and Safari but when it is viewed with IE I get an error and the page closes ( you have to surf through a few pages).
I know it is the above module because if I turn it off, the site works fine in IE.
The flash file imports and displays info from an XML file and the XML file reads from google finance.
Any ideas?
Thanks,
Todd

Do the flash communicate with files which is outside of the sitedomain?

How to use as3 in flash cs3 to add dynamic text from a text file into a flash file

let me start out by saying today is my first day of scripting
in flash.
I have a text file text.txt
it contains
text1=hello world
can someone please show me how to display this text in a
flash file
i have been searching for this for hours and there are
solutions with flash mx and actionscript 2.0 but i would like to
see how to do this in as3.
just a simple frame that loads that file and displays it when
you test run the program
much apreciated
RC

I'm not up on AS3 yet, but many things are still similar. You
need to use the LoadVars class to accomplish this, You can find
information this in Flahs Help>Actionscript>Actionscript
Language Reference>Actionscript classes.
rem: the text.txt file and the text.fla file must be in the
same directory.
The code will look something like this:

Insert animated gif or flash files (.swf) in Form?

How can i insert animated gif or flash files (.swf) or another type of animated files in Form?

If you are web deployed you can put an animated gif as the image to an iconic button.
Image items cannot display animated gifs.
Anything else you can do through a JavaBean if you need to.

How to Edit a flash file

Hi all,
I have a flash file, which I took from my website and want to
modify some of the contents and links in the flash file. I
installed "Macromedia Flash 8" and open the flash file; after
opening all I can see in the menu bar of my flash is "File, View,
Debug and Control" and could not find any control or tool to edit
the file and surprisingly rest of the other macromedia toolbar
icons are disabled. I need to know from where to start - How to
modify my flash file.
Your help is highly appreciated.
Thanks in advance
AP

quote:
Originally posted by:
Purplehaze
Also the file I am having trouble with is from a Template
that I got from my Host it is suppose to be made to be edited I
have both the files. I would still need the decompiler?
I do not know what files you have, 'fraid I cannot answer
this
My Friend
I think you need to check out some of the books, online
tutorials, course etc pertaining to Flash. Build up your knowledge
a little at a time and you will surprise yourself at what you can
achieve, you would also probaby build your own web apps and not
rely on templates.
There are many good folk on here that would help you with
your projects - go out and explore it - it's exciting - good luck

Text field is not working at first time after loading the flash files

Hi to all,
     In my Java application, I'm using a text field and a panel to load flash files. I'm using JDIC 0.9.1 to load the flash files in the panel. The flash files are created by Flash CS4.
     While running the application, I can't enter any value in the Text field, after minimize and maximize the application I can enter the values.
     This problem happens after change the jre version from 1.6 to 1.7.
     I'm getting the following exception while running the application.
org.jdesktop.jdic.init.JdicInitException: java.io.IOException: The filename, directory name, or volume label syntax is incorrect
at org.jdesktop.jdic.init.JdicManager.initBrowserNati ve(Unknown Source)
at org.jdesktop.jdic.browser.WebBrowser.<clinit>(Unkn own Source)
pls give me a solution.
Thanks in advance...:)

Have you tried testing on a server?
When you test in Flash, see if you get traces when you click these buttons.

Flash files as images in XML Forms

Hi Crew,
Anyone had to use flash files in XML forms Based Publishing?
Have created a simple XML Project asking the user to select two images, and these are then displayed in an iView.
gifs & jpegs display no problemo. swf (flash files) do not.
Any ideas?
Paul

Hi Paul,
I need to display a .swf file in a XML form. I read the solution that you have posted about modifying the XSL file, but i have no clue how to go ahead with this.
Could you kindly provide any document, link or the solution as to how to modify the XSL file ?
Any kind of help would be truly appreciated.

Merging 8 Flash Files

Similar Messages

Maybe you are looking for