Merging a clip in audition3 (please help)
I recently upgraded to audition3 and I'm having a bit of problem. Having done a succesful punch in on track 2 in multi track view, I can't find a way to merge my clip into the track. With audition 1.5 you simply right clicked the clip and merged the clip and it merged becoming one track. Surely I'm doing something wrong. The only way I seem to be able to achieve this is bounce the selected clips from trck 2 to a new track which if your doing several punch in's is quite tedious. Can anyone help.
The way this works in AA3 is totally different some think better some not.
Once you set up a punch-in area you can keep re-recording over that section as many times as you like creating layer upon layer of takes until you get the take you like. You dont have to 'merge' the takes or any takes for that matter. You can choose to play hidden takes or not.
But if it bothers you to not have those takes there I would suggest you lock the top clip in time slide it down to an adjacent track then delete any extra takes until you get to the 'main' track. Split the initial or main track peel it back and slide your keeper 'take' back up into position adjusting any x-fades.
Sounds more complex than it is or as I said you can do nothing - I tend to do the moving & peeling but thats just me.
You really don't have to have all takes bounced down to one track - leave it all to the final 'export'. Its not unusual to have hunbdreds of clips scattered over 20 or so tracks when I'm working.
Check www.mediasweeper.com.au for a utility to remove unwanted takes when you have finished your project
BTW be patient someone will answer your question when they get time - sometimes the easy ones are left for someone else to jump in
Consider me someone else ;-)
Similar Messages
-
My husband saved a load of photos and video clips to icloud, please help.
my husband saved a load of photos and video clips to icloud, my phone has been taken so i no longer have it but didnt know how i can get up my photos without my phone please help.
Hi shaza31,
If your iPhone was set to save photos to Photo Stream, you may be able to access them by turning on Photo Stream on your other devices. The following article may be helpful:
iCloud: Photo Stream FAQ
http://support.apple.com/kb/ht4486
Regards,
- Brenden -
Loop, pause, reverse clip...please help
Hi guys,
I seldom work with action script but rather using a normal animation by adding graphic to the timeframe.
the graphic is done but the file is 1,8 MB which is too big for 1 file.
can someone help me?
I am trying to create a function where at :
-first frame, the event will pause till certain amount of second and play till the last frame.
-last frame will also pause certain amount of time and play reverse to the first frame.
can someone please help me?var mc:MovieClip = whatever movieclip your want to pause, play, pause, reverse
var pause1:int=3000; // pause for 3000 ms
var pause2:int = 2000; // pause for 2000 ms
var n:int = 0;
var t:Timer=new Timer(pause1,1);
t.addEventListener(TimerEvent.TIMER,pauseF);
t.start();
function pauseF(e:TimerEvent):void{
if(n==0){
mc.play();
mc.addEventListener(Event.ENTER_FRAME,enterframeF);
n=(n+1)%2;
function enterframeF(e:Event):void{
if(n==1){
if(mc.currentFrame==mc.totalFrames){
mc.stop();
mc.removeEventListener(Event.ENTER_FRAME,enterframeF);
t.delay=pause2;
t.reset();
t.start();
} else {
mc.prevFrame();
if(mc.currentFrame==1){
mc.removeEventListener(Event.ENTER_FRAME,enterframeF);
t.delay=pause1;
t.reset();
t.start(); -
Error message while putting clips in timeline, please help!!
This msg pops up all of a sudden when I try to put clips in the timeline, but I opened another sequence in the same project and it does'nt give me the error msg, which is.....this edit can not be done because a transition would be cut or an item to one side of the transition would become too short. Thanks for the help.
Hi(Bonjour)!
Lock all tracks but the one where you want to insert the clip.
Michel Boissonneault -
Weird clipping issue..Please help!
I am recording vocals, and the wave forms are not clipping. They are healthy, good looking waves, but when played at 0 dB, some parts clip in the meter. I can turn the volume down to avoid the clipping, but then the lead vocal get too quiet. What should I do to fix this problem? Thanks
Jason Demayo wrote:
I am recording vocals, and the wave forms are not clipping. They are healthy, good looking waves, but when played at 0 dB, some parts clip in the meter. I can turn the volume down to avoid the clipping, but then the lead vocal get too quiet. What should I do to fix this problem? Thanks
First, if you're using Logic's default metering, don't do that! I don't even know why they ship it that way. Right click on the mixer's metering points (far left) and select "Sectional dB-linear." dBFS levels, already confusing for many, look way too low in the Exponential meter setup.
Now for the actual advice: this may seem counter-intuitive, but turn everything else down until the vocal sits right. Then crank up your monitors.
One thing you want to research and understand: headroom. In fact, headroom, gain, and signal levels will be a great start on your search for mixing knowledge.
A common issue/mistake is to continuously try to make everything louder instead of attenuating tracks and frequencies to bring out the ones you want. It's not that you shouldn't boost anything, but when you're only boosting you can only go so high in a digital system where the final output has a hard and fast upper limit (0dBFS). -
Mpeg 4 clip onto touch please help
i have MPEG-4 Movie that i want to put on my touch but ive tried everything and it wont go into itunes can someone help please
Did you convert the movie/video yourself?
In order for MP4 movie files to work with any iPod, they must be converted by a convert which has Apple standards in conversion.
Some encoders do not add Apple/iTunes certification within the MP4 movie. A movie without certification won't import into iTunes. iTunes only recognises Certificated MP4 files. Think of it as a certain encryption method, without the right encryption, you can't add it to iTunes.
Hope this helps
R-Fly -
Please help for Registration point to a movieclip/sprite
I am new to AS3 and have a doubt on Registration point for
Movie clip / Sprite. Please help me the sample code for this
I simply draw a line using AS3 in flash environment. but i
used graphics.moveTo for center. but if i run this it is simply
taking x,y axis 0,0 and move around the stage. I want to move this
from center of the stage. please help.
below is my code
var line:Sprite = new Sprite()
addChild(line);
var cx:Number = stage.stageWidth/2;
var cy:Number = stage.stageHeight/2;
var radius:Number = 1;
var increase:Number = 0;
line.graphics.lineStyle(1, 0xff00ff);
line.addEventListener(Event.ENTER_FRAME, onEnter);
function onEnter(event:Event):void
increase += radius;
//trace(increase);
//line.graphics.moveTo(cx, cy);
line.graphics.lineTo(cx + increase, cy + increase);
line.rotation += 0.1;to appear to control the registration point of line, make it
a child or an empty display object and offset it by -x,-y where x,y
is your choice for the apparent registration point. you can then
control the parent object and it will behave like your line with
changed registration point. -
ADOBE PREMIERE PRO-Merged clips wont link to the Media...please help!
One of my hard drives crashed and it unlinked other media which is on the other hard drive...In Adobe Premiere Pro when I try to link the media it links but the merged clips remain unlinked...I see the picture but no sound. Please help me its a massive project and I'm in desperate need of help. Thanks!
You might want to go read in http://forums.adobe.com/community/premiere/hardware_forum?view=overview
Starting with the FAQ drop down list at the top of the page for many articles/ideas -
A new problem with CS5 forced me to download PScc but the problem is still there. I am getting tmp00000001 in photo merge when importing multiple files from inside PS and if trying from bridge I am getting a pop up box telling me I need to select more than 1 file. Photoshop potomerge is not recognizing my selections from bridge..!! please help.. my knowledge of computers is a 3 on a scale of 1-10
if i run this particular code
( SELECT
AccountDetails.CUSTOMERNUMBER, AccountDetails.ACCOUNTNUMBER, CUSTOMERDETAILS.CDTITLE, CUSTOMERDETAILS.CDFIRSTNAME, CUSTOMERDETAILS.CDLASTNAME, AccountDetails.ACCOUNTTYPE,
AccountDetails.ORIGINALCONTRACTENDDATE, AccountDetails.CONTRACTTERM, AccountDetails.CONTRACTENDDATE, AccountDetails.BRANCHAREA, AccountDetails.PRODUCTTYPE,
AccountDetails.HOUSEBANKACCOUNT, AccountDetails.CARMODEL, AccountDetails.CARLICENCE, AccountDetails.ARREARSBALANCE, AccountDetails.CODEBTOR, AccountDetails.GUARANTORNUMBER
FROM AccountDetails
JOIN CUSTOMERDETAILS ON AccountDetails.CUSTOMERNUMBER = CUSTOMERDETAILS.CUSTOMERS1
WHERE EXISTS
( SELECT *
FROM Dcaaccountallocation
JOIN DebtEpisodes ON DebtEpisodes.ACCOUNTID = Dcaaccountallocation.ACCOUNTID
WHERE Dcaaccountallocation.dcaid = 41
AND Dcaaccountallocation.status = 2
AND DebtEpisodes.DCASentDate IS NULL
AND Dcaaccountallocation.ACCOUNTID = AccountDetails.ACCOUNTNUMBER
AND DebtEpisodes.DCAORLAWYER = 'DCA'
This returns 1 row of data
However if i run a small part of the above code...
SELECT *
FROM Dcaaccountallocation
JOIN DebtEpisodes ON DebtEpisodes.ACCOUNTID = Dcaaccountallocation.ACCOUNTID
WHERE Dcaaccountallocation.dcaid = 41
AND Dcaaccountallocation.status = 2
It returns a lot of rows with a status of 2
Now i presume what I am going to do is to ensure that all the fields provide satisfactory requirements, with regards to the above code. Although I have many records in all the stated tables already.
:( -
HI my partner used my apple id and email address when setting up his iPhone so when he turned on iCloud our phones merged!! How do we undo this? Can he still use my iTunes account with a different Id and can he change the email on his phone without losing information? Also iPad is linked too, the family uses this and I would like to keep my phone separate! At the moment nothing is sacred! Please help! We are not very good with computers!!
Several things here so let me attempt to clarify.
For iCloud the reason the contacts where removed from he other device is because you updated your contacts, in this case deleted them, and then iCloud updated the other device to match. By deleting the iCloud account on the device it will stop the device from using that iCloud account and therefore nothing will change on the other device. By using a seperate Apple ID you can still use the features of iCloud, Find My iPhone comes to mind, without your content (contacts, message etc.) merging with the other device
For iTunes, you cannot use two Apple IDs for one account however if you use the same account iTunes on your computer will keep the content on each device seperate very nicely. You can also configure the settings for iTunes and the App store on each device to keep the content from automatically downloading to the other device. What I meant by share apps and music is this. What happens if you find a game, lets say Minecraft, that you really like and it cost, as Mincraft cost, $6.99USD. You buy it and play for a while and then you realize that your husband really likes the game as well. If you both use the same Apple ID for iTunes he can download the $7.00ish game to his device at no additional charge. If you use seperate Apple IDs for iTunes well... it look like he will also be paying for the game to have it on his account. Same goes for Music and Movies
I hope that clears things up. Let me know if you have anymore question. -
IMovie Clip Speed Issue! Please Help!
Hey Guys.
I have been having a weird issue with iMovie '09. Here are my current iMovie and computer specs.
IMovie '09 - Version 8.0.6 (821) Latest Update
*Running on:*
Macbook 5,1 (Latest Updates)
Mac OS X 10.5.8
Processor - 2.4 GHz Intel Core 2 Duo
Memory - 2 GB 1067 MHz DDR3
Purchased a little over a year ago.
*My Problem:*
I start a new project in iMovie, I import the footage from my camera (Sony Webbie HD MHS-CM1 Camcorder - 1080p). iMovie imports the footage into 1440 x 1080 .mov files.
When I drag a event clip into the project area. I am able to preview the project as I work on it in the top right hand corner. Next I want to speed up the clip to make it fast forward. I click on the clip in the project, it highlights yellow. I click on the gear in the bottom left hand corner of the clip and click on clip adjustments. If I adjust the speed to any speed, even if I check reverse and I click okay. I preview the project and the preview in the top right corner is frozen at the first frame of the clip. The sound plays from the clip and regular speed. The clip in the project can no longer be adjusted or even selected. All I do from there on is delete the clip, I can't do anything and I am forced to restart the project and do it all over again, which wont work. The problem is I really need to use the clip.
I have tried to restart iMovie and even the computer, but it does nothing.
Please help me fix this problem.
Thanks,
KyleRight click on the clip in your Event and see if it gives you the option to Optimize Video. If so, optimize your video and it should be able to do the speed changes.
-
hey there, so im making a video for a family event..
i drag in an audio clip all of a sudden this becomes the be all and end all, and i want to sync some vid clips to that audio track, so let's say i drag in a 10 second video clip, at the end of the 10 seconds, i want to add a transition to fade to black.. i go to the transition window.. choose the cross dissolve or fade to colour, but it will not allow me to drag it on that video clip.. it always ends up on the audio track. this bloody application is so confusing compared to final cut. please help!Ahhh, now I see the problem, Grasshopper. Problem is, we are all Grasshoppers, here.
Yes, that little piece of info is critical. I'd say the biggest difficulty with FCPX is the whole new language.
If I read you correctly, your Audio is in the Main Storyline (Track 1 in plain old Editorese). This makes anything else you add (above or below) a "connected clip", which we can no longer think of as "Track 2" because Jobs sez so. So, yes, you cannot just add a transition to either end of a connected clip.
No argument with Tracy's solution, because I haven't seen any other general solution presented for any attempt to treat connected clips as the main storyline. And, of course, when they were "track 1" and "track 2", you could.
An alternative solution, however, is to highlight the connected clip and press Ctrl-V to bring up the Video Animation Editor. Click the "reveal button" for Compositing: Opacity (bottom, right). Once open, there is a "fade handle" to the right top. Drag it left for however much fade you wish. (there is one on the left as well, but you were only talking about a fade-out.)
A second alternative, perhaps for future projects where everything keys on audio, may be to create a Gap clip (used to be called slug) in the primary storyline before ever dropping in the audio. Then you can add video to the main story line and modify it without having to go thru hoops to do the simplest thing. -
I have a huge file which is in GB and I want to split the video into clip and export each clip individually. Can you please help me how to split and export the videos to computer? It will be of great help!!
video
What version of Premiere Elements do you have and on what computer operating system is it running?
Please review the following workflow.
ATR Premiere Elements Troubleshooting: PE11: Project Assets Organization for Scene and Highlight Grabs from Collection o…
But please also determine if your project goal is supported by
a. format of your source
and
b. computer resources
More later based on details that you will post.
ATR -
Noise at the beginning of each clip. PLease please help!
I have multiple interviews on my video and every one of the clips start with some bad noise. The problem seems to be happening after encoding the video. It sounds great in premiere but once I encode the noise appears. I recorded in 16 bit with a mono directional microphone. added music and i used a little bit of the denoiser ( -9) effect ( which doesn't seem to affect the start of the clip) please please help.
It is a known issue with the denoiser effect, it takes a few frames for it to kick in. If you have Audition you could use the noise reduction effects there instead, they are much better.
-
How to merge two java files with InputDialog to select?Please help me!?
//Addition Java application
import javax.swing.JOptionPane; // import the class
public class Addition {
// main method
public static void main(String[] args)
String firstNumber, secondNumber;
int number1, number2, sum;
// read the first number
firstNumber = JOptionPane.showInputDialog("Please enter a integer: ");
// read the second number
secondNumber = JOptionPane.showInputDialog("Please enter another integer: ");
// data type conversion
number1 = Integer.parseInt(firstNumber);
number2 = Integer.parseInt(secondNumber);
sum = number1 + number2;
// display the result
JOptionPane.showMessageDialog(null, "The sum is " + sum + ".", "Results", JOptionPane.PLAIN_MESSAGE);
System.exit(0);
//Multiplication Java Application
import javax.swing.JOptionPane;
public class Multiplication5
public static void main(String args[])
int number1, number2, number3, number4, number5, product;
String firstNumber, secondNumber, thirdNumber, forthNumber, fifthNumber ;
firstNumber =
JOptionPane.showInputDialog("Please input an integer");
secondNumber =
JOptionPane.showInputDialog("Please input another integer");
thirdNumber =
JOptionPane.showInputDialog("Please input the third integer");
forthNumber =
JOptionPane.showInputDialog("Please input the forth integer");
fifthNumber =
JOptionPane.showInputDialog("Please input the fifth integer");
number1 = Integer.parseInt(firstNumber);
number2 = Integer.parseInt(secondNumber);
number3 = Integer.parseInt(thirdNumber);
number4 = Integer.parseInt(forthNumber);
number5 = Integer.parseInt(fifthNumber);
product = number1 * number2 * number3 * number4 * number5;
JOptionPane.showMessageDialog(null, "The product is " + product, "Results", JOptionPane.PLAIN_MESSAGE);
System.exit(0);
I seek for help to merge above two java application files.
I need to call JoptionPane.showInputDialog to prompt the user to input the operation, 1 for addition, 2 for multiplication. In this dialog, the user is expected to enter the integer of 1 or 2 for the calculation.
Please help me ! Thank you!Hi CRay,
You just need to call the main methods of the 2 classes according to "1" or "2" entered.
It is better if the "multiplication" and "addition" are declared as methods rather than in main methods.
Example:-
public static void Addition()
Then call
Addition.addition();
than
Addition.main(new String[]{});
as shown below.
import javax.swing.JOptionPane; // import the class
public class Test{
public static void main(String[] args){
// read which operation to perform
String operation = JOptionPane.showInputDialog("Please enter which operation : ");
if(operation.equals("1")){
Addition.main(new String[]{});
else{
Multiplication5.main(new String[]{});
}Rose
Maybe you are looking for
-
I have two Apple ID's. One I rarely use and only have it because I was given a new macbook for work and they set it up for me when they were setting the new macbook up. I already had an Apple ID that I use for everything - iCloud, iTunes etc. Using m
-
I tried to authorize a new computer with Windows 8 for my iTunes acct. Per iTunes Help, there is an "authorize computer" prompt in the menu selection on iTunes store website. I can find no such listing. I have two computers linked to my account so
-
How do i restore data after hard drive replacement
I recently had to have my HD replaced (failed after nearly six years). the data was recovered and is sitting on my desktop in a folder. How do I restore that data (login, passwords, photos,etc) so it is the default login on my mac?
-
Hi, The users have created the Payment Term for the Credit Management purposes and the same has been maintained in the Customer Masters. While creating the Payment Term, the Default for baseline date has been specified as "Document Date". Thus the ba
-
Dear Nokia, I am kumar i lost my nokia lumia 620 last saturday 05/07/2014 i am scare of misuse of it and imie no is 35xxxxxxxxxxxxx which was last used mobil no is 81xxxxxxxx. kindly lock it. before it misuse Regards Kumar D Moderator's note: Phone