Merging Basic data View and Classification View in Material Master
Hi,
There is a requirement to append Classification View under Basic Data View and then finally to delete Classification View.
As per my understanding, it is not possible. Please let me know if it is possible, if so, please let me know how is it possible.
A quick response is appreciated.
Thanks & Regards
Bhaskar Baddela
Hi,
Refer the thread: Problem creating Material Master sales view with LSMW which discuss the same issue. You may check and revert back.
Regards,
AKPT
Similar Messages
-
Sales view / Tax classification upload in material master - LSMW
Hi All,
While Creating in LSMW using RMDATIND Batch input method for material mater creation . I am getting an error of "you have not fully maintained tax classification" (M172 error message).
LSMW details are as follows:
Project, sub-proj, object : SCIMM,SCIMM,SCI_MM_CREATE
Please suggest the field value mapping section of LSMW and suggest me how to fix the problem.
When I create masters manually, in sales view/tax classification 4 tax categories (3 for CA CTX1,CTX2,CTX3 and one for US UTXJ) are getting populated automatically and I need to key-in only 0 or 1 for tax values (ex material :KCC9800MEKIT for sales org 2000, dc 70, dv 70).
Please sugget me how to fix this issue.
thanks
PRadeepHi Murugesh,
Thanks for your response on this query. I read the link contents.
LSMW TAX classification for materials
In the above thread, you have specified
1. If you have a separate file for tax codes to be applied for different materials then you need to map the records of this file to BMMH2 ( multiple records for a material possible for different countries). Then you need to map BGR00, BMM00 & BMMH1 with another header file with one record for material for the corresponding records on file which correcponds to BMMH2.
I require your help to implement the above step. As mentioned by you, I have 3 tax codes for CA and one for US (2 diff countries) for each material to be maintained in Tax classification.
I have created a main source structure SS which has fields for all views (basic view, sales view, purchasing, plant/sloc and warehouse). I have created a substructure SSTAX for main source structure SS for Tax fields (Aland, taxty,taxm1) and assigned to BMMH2. Will this work or we need to create two source structure (at same level) for this requirement.
I am bit confused on how to link these two input files. I created one record for material xyz in header file and 4 records in tax file (4 tax categories ctx1,ctx2,ctx3 and utxj). How to create one to one relationship working between header and tax file. How the tax file structure will be for 10 material records?
LSMW Direct Input Method RMDATIND tax classification material
In the above thread, I find difficulty to follow your steps for same tax data applicable for all materials.
1.enable the
Extras->DisplayVariant
In LSMW transaction, I find diffculty to locate the above option.
from the menu of the LSMW & check all the check boxes. Now you see the
__END_OF_RECORD__
for the structure
BMMH2which has to be mapped with the input structure in the Maintain structure relations step.
double click on the __END_OF_RECORD__
Again I find difficulty to follow the above step. Please explain me step by step to reach below abap editor step.
which will lead to ABAP editor & then put the following code:
Canada
bmmh2-stype = '3'.
bmmh2-aland = 'CA'.
bmmh2-taty1 = 'CTX1'.
bmmh2-taxm1 = '1'.
transfer_record.
bmmh2-stype = '3'.
bmmh2-aland = 'CA'.
bmmh2-taty1 = 'CTX2'.
bmmh2-taxm1 = '1'.
transfer_record.
Thank you very much for your help and time. I am sure this will be helpful for Pradeep as well.
Thanks and regrads
Varadharajan -
Sales view / Tax classification upload in material master
Hi All,
While Creating in LSMW using RMDATIND Batch input method for material mater creation . I am getting an error of "you have not fully maintained tax classification" (M172 error message).
LSMW details are as follows:
Project, sub-proj, object : SCIMM,SCIMM,SCI_MM_CREATE
Please suggest the field value mapping section of LSMW and suggest me how to fix the problem.
When I create masters manually, in sales view/tax classification 4 tax categories (3 for CA CTX1,CTX2,CTX3 and one for US UTXJ) are getting populated automatically and I need to key-in only 0 or 1 for tax values (ex material :KCC9800MEKIT for sales org 2000, dc 70, dv 70).
Please sugget me how to fix this issue.
thanks
PRadeepHI,
instead of LSMW..try with BDC by SHDB---batch input transaction recording. -
Difference Between G/L View and Entry View in New G/L Accounting
Hi,
Can anyone tell me the difference between the G/L View and Entry View in New G/L Accounting as we are upgrading from 4.7 to 6.0.Hi,
Entry view is the view to show how you have done data entry while posting a transaction and general ledger View is the document splitting view, where system will show you the split posting which system creates on its own.
Example given by Alex above is general ledger View, ie: how system would split the line items based on base item categories.
Regards,
SAPFICO -
Diff bt Help view and Maintanence view
hi gem's
i need the diff bt Help view and Maintanence view with example...............Hi
The followings are different types of views:
- Database View (SE11)
Database views are implement an inner join, that is, only records of the primary table (selected via the join operation) for which the corresponding records of the secondary tables also exist are fetched. Inconsistencies between primary and secondary table could, therefore, lead to a reduced selection set.
In database views, the join conditions can be formulated using equality relationships between any base fields. In the other types of view, they must be taken from existing foreign keys. That is, tables can only be collected in a maintenance or help view if they are linked to one another via foreign keys.
- Help View ( SE54)
Help views are used to output additional information when the online help system is called.
When the F4 button is pressed for a screen field, a check is first made on whether a matchcode is defined for this field. If this is not the case, the help view is displayed in which the check table of the field is the primary table. Thus, for each table no more than one help view can be created, that is, a table can only be primary table in at most one help view.
Go thru this link plzz
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
Difference between "Help View" and "Search Help"
- Projection View
Projection views are used to suppress or mask certain fields in a table (projection), thus minimizing the number of interfaces. This means that only the data that is actually required is exchanged when the database is accessed.
A projection view can draw upon only one table. Selection conditions cannot be specified for projection views.
- Maintenance View ( SE54 )
Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system.
Please have a look at below link. It will help you.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed06446011d189700000e8322d00/frameset.htm
for more detailed info look on:
http://www.sap-img.com/abap/what-is-the-different-types-and-usage-of-views.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/abap+dictionary&
1.Go to se11
2. select view radiobutton and give a name
3. Create
4. select type of view you want to create. Such as database view.
5. give short description
6. give a table name such as mara
7. press the pushbutton relationship. here you will find all the tables which are allowed to create view with mara.
8. select one or mane tables.
8 copy
9.save , check and activate.
Regards
Anji -
What r the trns code for maintenance view, help view and projection view
hi all
what r the transaction code for maintenance view, help view and projection view
can anyone tell me how to create maitenance, help and projection view.
with an example
regs
hari<b>What is the Different Types and Usage of Views
The followings are different types of views:</b>
- <b>Database View (SE11)</b>
Database views are implement an inner join, that is, only records of the primary table (selected via the join operation) for which the corresponding records of the secondary tables also exist are fetched. Inconsistencies between primary and secondary table could, therefore, lead to a reduced selection set.
In database views, the join conditions can be formulated using equality relationships between any base fields. In the other types of view, they must be taken from existing foreign keys. That is, tables can only be collected in a maintenance or help view if they are linked to one another via foreign keys.
- <b>Help View ( SE54)</b>
Help views are used to output additional information when the online help system is called.
When the F4 button is pressed for a screen field, a check is first made on whether a matchcode is defined for this field. If this is not the case, the help view is displayed in which the check table of the field is the primary table. Thus, for each table no more than one help view can be created, that is, a table can only be primary table in at most one help view.
-<b> Projection View (SE11)</b>
Projection views are used to suppress or mask certain fields in a table (projection), thus minimizing the number of interfaces. This means that only the data that is actually required is exchanged when the database is accessed.
A projection view can draw upon only one table. Selection conditions cannot be specified for projection views.
<b>- Maintenance View ( SE54 )</b>
Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system.
reward points if it is usefull...
Girish -
Difference among the Help view,Database view and Maintanance View
hi,
can Anyone pls let me know the Difference among the Help view,Database view and Maintanance View
thanks®ards
ramaThe followings are different types of views:
Database View (SE11)
Database views are implement an inner join, that is, only records of the primary table (selected via the join operation) for which the corresponding records of the secondary tables also exist are fetched. Inconsistencies between primary and secondary table could, therefore, lead to a reduced selection set.
In database views, the join conditions can be formulated using equality relationships between any base fields. In the other types of view, they must be taken from existing foreign keys. That is, tables can only be collected in a maintenance or help view if they are linked to one another via foreign keys.
Help View ( SE54)
Help views are used to output additional information when the online help system is called.
When the F4 button is pressed for a screen field, a check is first made on whether a matchcode is defined for this field. If this is not the case, the help view is displayed in which the check table of the field is the primary table. Thus, for each table no more than one help view can be created, that is, a table can only be primary table in at most one help view.
Go thru this link plzz
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
Difference between "Help View" and "Search Help"
Projection View
Projection views are used to suppress or mask certain fields in a table (projection), thus minimizing the number of interfaces. This means that only the data that is actually required is exchanged when the database is accessed.
A projection view can draw upon only one table. Selection conditions cannot be specified for projection views.
Maintenance View ( SE54 )
Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system.
Please have a look at below link. It will help you.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed06446011d189700000e8322d00/frameset.htm
for more detailed info look on:
http://www.sap-img.com/abap/what-is-the-different-types-and-usage-of-views.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/abap+dictionary&
1.Go to se11
2. select view radiobutton and give a name
3. Create
4. select type of view you want to create. Such as database view.
5. give short description
6. give a table name such as mara
7. press the pushbutton relationship. here you will find all the tables which are allowed to create view with mara.
8. select one or mane tables.
8 copy
9.save , check and activate.
The followings are different types of views:
Database View (SE11)
Database views are implement an inner join, that is, only records of the primary table (selected via the join operation) for which the corresponding records of the secondary tables also exist are fetched. Inconsistencies between primary and secondary table could, therefore, lead to a reduced selection set.
In database views, the join conditions can be formulated using equality relationships between any base fields. In the other types of view, they must be taken from existing foreign keys. That is, tables can only be collected in a maintenance or help view if they are linked to one another via foreign keys.
Help View ( SE54)
Help views are used to output additional information when the online help system is called.
When the F4 button is pressed for a screen field, a check is first made on whether a matchcode is defined for this field. If this is not the case, the help view is displayed in which the check table of the field is the primary table. Thus, for each table no more than one help view can be created, that is, a table can only be primary table in at most one help view.
Go thru this link plzz
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
Difference between "Help View" and "Search Help"
Projection View
Projection views are used to suppress or mask certain fields in a table (projection), thus minimizing the number of interfaces. This means that only the data that is actually required is exchanged when the database is accessed.
A projection view can draw upon only one table. Selection conditions cannot be specified for projection views.
Maintenance View ( SE54 )
Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system.
Please have a look at below link. It will help you.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed06446011d189700000e8322d00/frameset.htm
for more detailed info look on:
http://www.sap-img.com/abap/what-is-the-different-types-and-usage-of-views.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/abap+dictionary&
Go thru this link plzz
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
Difference between "Help View" and "Search Help"
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed06446011d189700000e8322d00/frameset.htm
Hope this is helpful, Do reward -
What is the main difference between view and materialize view and advantage of Mview ??
What is the main difference between view and materialize view and advantage of Mview ??
1.A view uses a query to pull data from its associated tables.
2.Views do not have data's physically stored in the Database.
3.Views Get the Data from 2 or more tables and displays as a single block.
4.But a materialized view is a table on disk is a result set of a query done.
5.A Materialized view can have data's in the database.
6.Materialized view are used for Boosting the Performance.
7.And the important one is Materialized views are updated based on the parameters defined when they are created.
8.By using triggers we can update the data in a materialized view.
9.When you call a materialized view it will show the data when it was last updated.
Hope it helps. -
What is the diffrence between SAP View and CAD View ?
What is the diffrence between SAP View and CAD View ?
What is the main purpose of SAP View
and
What is the main purpose of CAD View
On SAP help i found
SAP View is used for :The SAP view displays the SAP structure (document-based structure) for the active CAD object, or another document info record (header document), with a single-level or multilevel document structure in a tree structure. You can variably configure the fields using the layout editor.
CAD View is used for :The CAD view displays the document-based structure of the currently active CAD object, such as the structure of an assembly. The CAD system determines the complete (multilevel) structure and copies it either completely or in stages to the SAP system, in accordance with the default explosion level.
BUT I did not understand it well
Can someone explain this with an example
THanks
RajHello Raj,
SAP View can be further described as the view that is based on what is existing already in the SAP system. This view is generally used by SAP purchasing, MM people etc
CAD view is nothing but the replication of the model tree view in the SAP system. This is used by the design engineer and this view replicates only the parts that are actively displayed on the CAD tool window.
hope this helps. Let me know if you have further questions else please close the message.
regards
N K -
Differences Between Entry View and GL View - Doc. Splitting
Hello Experts,
I need some help about an issue occuring in our Client right now, differences in Entry view and GL View. Any help will be appreciated.
- Debit or Credit Balance posting of an account does not match with the balance posted in GL View, generally the GL view posts an amount above of the Entry view, and then it cause the Debit/Credit balance does not match with the movement in Entry View. Example Below from Quality System:
Debit Balance in January 2013: 319.794.641,38
Movement from FAGLL03 - OK.
Movement from FBL3N - Entry View Difference: 319.794.619,86 - 319.794,641,38 = 21,52 Debit
Checking NEW-GL Movement, we found the posting difference:
The Document Entry View: 5.465,22 Credit From Bank Account
The GL View - SAP Credited 5.486,74 Bank Account PC 1411 and Cr Bank Account PC 1444.
Total: -5.486,74 + 21,52 = 5.465,22 OK on Balance, but not OK from movement considering the Entry view.
- Questions:
- I understood the calculations, it was calculated as mentioned in note 1072850_Field overflow or very large amounts due to doc splitting
- Is this supposed to happen by SAP Doc.Splitting perspective?
- I am facing this issue because we need to send to the government account balances and their movements, and according to laws we need to pay additional amount for addtional lines generated, so it was better to send the information based in Entry View, not in GL View.
- FS10N Show warning message "New general Ledger Implemented, use FAGLB03", and when i execute the transaction the balance showed was the balance from FAGLB03.
- SAP 605 APPL.
Regards,
Leandro.Hi ,
Can you Please look at OSS note
1655571 - Multiple values and multiple/additional line items appearing in the NewGL View when compared to Entry View
Many Thanks -
Add a simple switch to PDF Reader to change between MY-VIEW and ORIGINAL-VIEW
I would like to open pdf file with my same default viewing preference *every single time* that I open a PDF file, regardless of what the original document creator set as the default view. It would be nice to have a SIMPLE switch between MY-VIEW and ORIGINAL-VIEW. It's very frustrating to have to keep switching my view preferences every time I open a new file with a different default.
Thank you Bernd, but that is only part of the solution. For example, I do set the Page Layout to 1-page-continuous. MOST of the time it keeps this setting, but some documents either override that setting, or perhaps it reverts back to a default (maybe with version upgrades?). The other part is that I always want the menu-bar and toolbar to show up. Some documents hide these when they open. I realize that I can hit [F8] and/or [F9] to toggle these, but there are additional settings. I also want to always have the selection tools available, etc. Bottom Line: I just want a collection of settings that I can call up with a single, simple shortcut or button, so I don't have to perform multiple steps just to get the tool back to my standard configuration whenever something changes it.
-
How can the info block be assigned with the view and assign view to users.
Dear Friends,
Anyone could plz tell me how can the info block be assigned with the view and assign view to users. Also how can the info block in sale summary be assigned with a view and how to assign this view for user.
Regards,
AshimaHi,
To define view and to make it default
Goto SAP IMG > Sales and Distribution > Sales Support (CAS) > Sales Summary > Define Reporting Views (Tcode:OVCD).
To assign default user to the view.
Goto SAP IMG > Sales and Distribution > Sales Support (CAS) > Sales Summary > Assign Default View To User (Tcode:OVCC).
To assign Elements of SAPScript "SD-SALES-SUMMARY" to information Blocks To A View use
Goto SAP IMG > Sales and Distribution > Sales Support (CAS) > Sales Summary > Assign Information Blocks To A View (Tcode:OVCB). -
General ledger view and entry view
Can any one help me in understanding the difference between GL(general ledger) view and entry view?
Hi,
While entry view shows the Customer/ Vendor and other revenue/ Expence GLs
General ledger view shows the Reconciallation GL and revenue/ Expence GLs. We cannot find Customer and Vendor details here.
Hope your question is answered.
Regards,
Sharan -
How to create Maintaince View and Help View
Hi,
Can u pls tell me the step by step procedure for how to
create Maintaince View and Help View.
And what's the use of these view's.
Regards,
KumarFOR MAINTANENCE VIEW
Create a table or a view in transaction SE11.
A function group in SE80 transaction
1>go to se54 transaction.
2>give the name of the table /view starting from z.
3>select "Generated Objects" radio button.
4>click on "create/change" push button.
5>you get a pop asking you whether to create modules ,click on YES
6>give "authorization group" as temp.
7>give the function group name created by you.
8>click on "find Scr numbers "push button on the application tool bar.
9>in the pop up that you get select the 1st option and press enter
10>click on the create push button (it is beside "Find Scr numbers" push button)
11>selct local object and pres enter.
12>go to SM30 transaction.
13>give the table/view name
14>click on "maitain" push button. -
Aperture stopped showing pictures in viewer and split view
Suddenly Aperture 3 has stopped showing any pictures in viewer and split view (except for the bottom fim strip) but I can see them all in browser view. I have tried using Aperture Repair and have reset Aperture (using Clean My Mac to delete the user setup files). I also tried creating a new library with just a few files to see if the size of the library was an issue. I also tried opening the libraries in iPhoto and have the same result. I can browse the minatures but not open the larger pictures.
The only thing I have yet to try is to delete and reinstall Aperture. But since iPhoto has the same problem, I don't see how that would be the issue.
Aperture is version 3.5.1, OS is OSX 10.9.2.I would have to redo the cleanmymac step but essentially it is like creating a new install before using the app.
If you do not know, what exactly will be uninstalled, by a general cleaning application, don't use it. That is risky.
Using a different user account makes no difference.
That means, you are having a system wide problem. Fixing your Aperture library or settings in your account will probably not help.
First thing to try, reinstall Aperture.
And if that does not bring your split view back, reinstall Mavericks. You may have missing caches and necessary configuration files, since iPhoto is having the same problem.
Did you run CleanMyMac to uninstall other applications, before the problem first occured? Usually it is much safer, to use only the uninstaller, that come with an application. Otherwise, you are risking to uninstall items needed by other applications or the system.
To reinstall MacOS X 10.9.2, boot into OS X Recovery, see this document: http://support.apple.com/kb/HT4718
Maybe you are looking for
-
SAP GUI issue with Portal on Windows Vista
Hello. I am using Windows Vista on my laptop. We use the portal to access our SAP systems. I have SAP GUI 7.1 installed on my machine. When I click my WIN GUI link from inside the portal I get a download file request. I download the file, howeve
-
Where could I get the Adobe Reader Mobile 9 SDK?
I am develop a windows mobile 6.5 application and want to do some tests on viewing PDF file with the mobile. http://www.adobe.com/devnet/readermobile/ I followed as above instruction to mail to [email protected] several times but returned with Mail F
-
Hi, i am trying to compare colums in the same tables. The sql that i am using is as below. select a.parttypeid,a.makerref,a.partname,b.parttypeid,b.makerref,b.partname from sparetype a , sparetype b where a.parttypeid!=b.parttypeid and a.makerref=b.m
-
i have just purchased my new ipad and I want to transfer my iPod library of music and videos to the iPad,how do I do this easily,seems to be a basic neccessity
-
Hi I have performed a switch over between primary and standby databases. But i want to trace the date on which these switchovers are done....any way.... I don't have the previous alert logs....so any other way ? Regards, Jibu