Merging Groups Cropping Problem CS6
When merging groups in Photoshop CS6 (Command-E), the images are now being cropped to the document edge. I need to retain the image data for repositioning/sizing. This was not default behavior in previous versions and I can't find an option to change it.
Yep, just starting using CS6 and this is annoying. I like to group to flatten and then make that layer a smart object because I don't need the other layers but I want the new layer to retain nondestructive sizing. Yes you can get around it but why would you change this?
Similar Messages
-
Cropping Problem: Image break-up
Hi
So far, I am quite impressed with CS6--the more I use it the better it gets. However, I am running into an ongoing issue with cropping. It mainly occurs with stitched panoramas, and happens whether I use RAW, tiffs or jpegs. Once the image is stitched and the layers merged, the crop tool is selected. As soon as any action is initiated, the image breaks up (see below). As soon as I ok the action (by hitting the check box to crop) all is back to normal, but the break-up of the image makes it very difficult to crop accurately. The problem never occurred with CS5. Any ideas? (Note: the image below was stitched from RAW images processed by LR4, saved as a tiff and then re-opened in CS6.)
StuartThanks. I couldn't really see what value the other information would have been! I use programs, but that's it, and am a bit out of my depth here. And it's been a long day ...
This should be what you want.
Stuart
Adobe Photoshop Version: 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:5, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2660 MHz
Built-in memory: 7990 MB
Free memory: 5604 MB
Memory available to Photoshop: 7051 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
Photoshop crashed on 6/04/2012 at 11:49:37 AM (GetImageViewResourceSharingGLContext)
The GPU Sniffer crashed on 23/04/2012 at 2:02:18 PM
OpenGL Drawing: Disabled.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: ATI Technologies Inc.
Video Card Renderer: ATI Mobility Radeon HD 6550
Display: 2
Display Bounds:= top: 0, left: 1920, bottom: 768, right: 3286
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1200, right: 1920
Video Card Number: 2
Video Card: Intel(R) HD Graphics
OpenCL Unavailable
Driver Version: 8.771.1.0
Driver Date: 20100909000000.000000-000
Video Card Driver: igdumd64.dll,igd10umd64.dll,igdumdx32,igd10umd32
Video Mode: 1366 x 768 x 4294967296 colors
Video Card Caption: Intel(R) HD Graphics
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384
Video Card Number: 1
Video Card: ATI Mobility Radeon HD 6550
OpenCL Unavailable
Driver Version: 8.771.1.0
Driver Date: 20100909000000.000000-000
Video Card Driver: atiu9p64.dll,atiuxp64.dll,atiuxp64.dll,atiu9pag,atiuxpag,atiuxpag,atiumdva,atiumd6a.cap,a titmm64.dll
Video Mode: 1920 x 1200 x 4294967296 colors
Video Card Caption: ATI Mobility Radeon HD 6550
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384
Serial number: Tryout Version
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\Stuart\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 567.8G, 79.7G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2012/01/18-15:07:40 66.492997 66.492997
adbeape.dll Adobe APE 2012/01/25-10:04:55 66.1025012 66.1025012
AdobeLinguistic.dll Adobe Linguisitc Library 6.0.0
AdobeOwl.dll Adobe Owl 2012/02/09-16:00:02 4.0.93 66.496052
AdobePDFL.dll PDFL 2011/12/12-16:12:37 66.419471 66.419471
AdobePIP.dll Adobe Product Improvement Program 6.0.0.1642
AdobeXMP.dll Adobe XMP Core 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPFiles.dll Adobe XMP Files 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14:56:27 66.145661 66.145661
adobe_caps.dll Adobe CAPS 5,0,10,0
AGM.dll AGM 2012/01/18-15:07:40 66.492997 66.492997
ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 62.490293
aif_ocl.dll AIF 3.0 62.490293
aif_ogl.dll AIF 3.0 62.490293
amtlib.dll AMTLib (64 Bit) 6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00) 1.000000
ARE.dll ARE 2012/01/18-15:07:40 66.492997 66.492997
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2012/01/18-15:07:40 66.492997 66.492997
BIBUtils.dll BIBUtils 2012/01/18-15:07:40 66.492997 66.492997
boost_date_time.dll DVA Product 6.0.0
boost_signals.dll DVA Product 6.0.0
boost_system.dll DVA Product 6.0.0
boost_threads.dll DVA Product 6.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.0.5.19287 2.0.5.19287
CoolType.dll CoolType 2012/01/18-15:07:40 66.492997 66.492997
data_flow.dll AIF 3.0 62.490293
dvaaudiodevice.dll DVA Product 6.0.0
dvacore.dll DVA Product 6.0.0
dvamarshal.dll DVA Product 6.0.0
dvamediatypes.dll DVA Product 6.0.0
dvaplayer.dll DVA Product 6.0.0
dvatransport.dll DVA Product 6.0.0
dvaunittesting.dll DVA Product 6.0.0
dynamiclink.dll DVA Product 6.0.0
ExtendScript.dll ExtendScript 2011/12/14-15:08:46 66.490082 66.490082
FileInfo.dll Adobe XMP FileInfo 2012/01/17-15:11:19 66.145433 66.145433
filter_graph.dll AIF 3.0 62.490293
hydra_filters.dll AIF 3.0 62.490293
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt42.dll International Components for Unicode 4, 2, 0, 0
icuin42.dll International Components for Unicode 4, 2, 0, 0
icuuc42.dll International Components for Unicode 4, 2, 0, 0
image_compiler.dll AIF 3.0 62.490293
image_flow.dll AIF 3.0 62.490293
image_runtime.dll AIF 3.0 62.490293
JP2KLib.dll JP2KLib 2011/12/12-16:12:37 66.236923 66.236923
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
LogSession.dll LogSession 2.1.2.1640
mediacoreif.dll DVA Product 6.0.0
MPS.dll MPS 2012/02/03-10:33:13 66.495174 66.495174
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
onOneToolboxPlus.dll onOne Toolbox2 Dynamic Link Library 2.2.0
ONProxySupport.dll TODO: <Product name> 1.0.0.1
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS6 CS6
Plugin.dll Adobe Photoshop CS6 CS6
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (64 bit) 3.0.0.383
PSArt.dll Adobe Photoshop CS6 CS6
PSViews.dll Adobe Photoshop CS6 CS6
SCCore.dll ScCore 2011/12/14-15:08:46 66.490082 66.490082
ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15:08:46 66.490082 66.490082
tbb.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 6.0.0.24
WRServices.dll WRServices Friday January 27 2012 13:22:12 Build 0.17112 0.17112
wu3d.dll U3D Writer 9.3.0.113
zlib.dll zlib 1.2.5
Required plug-ins:
3D Studio 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Accented Edges 13.0
Adaptive Wide Angle 13.0
ADM 3.11x01
Angled Strokes 13.0
Average 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Bas Relief 13.0
BMP 13.0
Camera Raw 7.0
Chalk & Charcoal 13.0
Charcoal 13.0
Chrome 13.0
Cineon 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Clouds 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Collada 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Color Halftone 13.0
Colored Pencil 13.0
CompuServe GIF 13.0
Conté Crayon 13.0
Craquelure 13.0
Crop and Straighten Photos 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Crop and Straighten Photos Filter 13.0
Crosshatch 13.0
Crystallize 13.0
Cutout 13.0
Dark Strokes 13.0
De-Interlace 13.0
Dicom 13.0
Difference Clouds 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Diffuse Glow 13.0
Displace 13.0
Dry Brush 13.0
Eazel Acquire 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Embed Watermark 4.0
Entropy 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Extrude 13.0
FastCore Routines 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Fibers 13.0
Film Grain 13.0
Filter Gallery 13.0
Flash 3D 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Fresco 13.0
Glass 13.0
Glowing Edges 13.0
Google Earth 4 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Grain 13.0
Graphic Pen 13.0
Halftone Pattern 13.0
HDRMergeUI 13.0
IFF Format 13.0
Ink Outlines 13.0
JPEG 2000 13.0
Kurtosis 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Lens Blur 13.0
Lens Correction 13.0
Lens Flare 13.0
Liquify 13.0
Matlab Operation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Maximum 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Mean 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Measurement Core 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Median 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Mezzotint 13.0
Minimum 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
MMXCore Routines 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Mosaic Tiles 13.0
Multiprocessor Support 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Neon Glow 13.0
Note Paper 13.0
NTSC Colors 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Ocean Ripple 13.0
Oil Paint 13.0
OpenEXR 13.0
Paint Daubs 13.0
Palette Knife 13.0
Patchwork 13.0
Paths to Illustrator 13.0
PCX 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Photocopy 13.0
Photoshop 3D Engine 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Picture Package Filter 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Pinch 13.0
Pixar 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Plaster 13.0
Plastic Wrap 13.0
PNG 13.0
Pointillize 13.0
Polar Coordinates 13.0
Portable Bit Map 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Poster Edges 13.0
Radial Blur 13.0
Radiance 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Range 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Read Watermark 4.0
Reticulation 13.0
Ripple 13.0
Rough Pastels 13.0
Save for Web 13.0
ScriptingSupport 13.0
Shear 13.0
Skewness 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Smart Blur 13.0
Smudge Stick 13.0
Solarize 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Spatter 13.0
Spherize 13.0
Sponge 13.0
Sprayed Strokes 13.0
Stained Glass 13.0
Stamp 13.0
Standard Deviation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Sumi-e 13.0
Summation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Targa 13.0
Texturizer 13.0
Tiles 13.0
Torn Edges 13.0
Twirl 13.0
U3D 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Underpainting 13.0
Vanishing Point 13.0
Variance 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Variations 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Water Paper 13.0
Watercolor 13.0
Wave 13.0
Wavefront|OBJ 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
WIA Support 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Wind 13.0
Wireless Bitmap 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
ZigZag 13.0
Optional and third party plug-ins:
Perfect Effects Free 3.0.2
Perfect Effects Free Filter 3.0.2
Perfect Effects Free Smart Filter 3.0.2
Plug-ins that failed to load: NONE
Flash:
onOne
Mini Bridge
Kuler
Installed TWAIN devices: NONE -
Group by problem at pivot table
Hi,
firstly i am making a table, everything is ok,
after i click pivot table, st_desc column writes same value again, i couldnt understand the reason.
please check my screen shots below,
http://www.odilibrary.com/index.php/oracle-data-integrator/99-group-by-problem
kindly advise pleasethat my fault
there is a null at the beginning of the value, they are different,
sorry -
My system equals:
Lightroom version: 4.0 Beta [800002]
Operating system: Windows 7 Ultimate Edition
Version: 6.1 [7600]
Application architecture: x64
System architecture: x64
Physical processor count: 4
Processor speed: 2.4 GHz
Built-in memory: 8191.0 MB
Real memory available to Lightroom: 8191.0 MB
Real memory used by Lightroom: 590.0 MB (7.2%)
Virtual memory used by Lightroom: 543.2 MB
Memory cache size: 1083.2 MB
System DPI setting: 96 DPI
Desktop composition enabled: Yes
Displays: 1) 1920x1080
While in video, using captured frame – my picture is extracted at 19 20 x 10 80.
Attempting to use this picture in the books module causes resolution problems yet the same picture when used in the print module and save to a picture file causes no resolution problems and becomes 255 0 x 3300 when using it in the book module.
Multiple Cropping problems have been reported already and I have read tech support is looking at some of these problems - hopefully they will fix the following
In crop the custom dimension will not exceed 5 changes (would like to be able to see it built out to 10 custom sizes) and it no longer overwrites the last dimension change. It defaults to 2×3/4×6
NOT WORKING like LTRM 3Some thing here might help:
iMovie 11 tutorials:
http://help.apple.com/imovie/
http://www.apple.com/ilife/tutorials/#imovie
and also these:
http://www.kenstone.net/fcp_homepage/imovie_09_stone.html
http://www.kenstone.net/fcp_homepage/imovie_09_stone.html#interface -
Auto Cropping with video images problem (CS6)
I'm working with 6 video clips to create a compilation. All are mp4s. When 2of them are dropped (or dragged) form the source panel into the timeline, for some reason the video on them is zoomed in, or cropped, to like 30% of the original. When I view the clips in the source panel (by double clicking on the file in "source" below, everything is fine - it's 100% of the image there. But something is happening when the file gets dropped into the timeline on the right. Is there some zoom or crop feature somewhere that's getting triggered that I need to turn off? Thanks for any help, Andrew
I may have figured out how this happens but not how to fix.
When I imported the two “problem” clips, they look normal (non-cropped) if I choose “Change Existing Settings.” They become cropped, however, if I choose “Keep Sequence Settlings.”
The problem is I have problems with the other 4 clips if I also choose “Change Sequence Settings.” These 4 are only ok if I choose “Keep Sequence Settings.” So the reverse problem of the other 2 clips.
Is there a way to custom choose either “Keep Sequence Settings” or “Change Existing Settings” for each clip? It seems that once you make a choice for either setting on the first clip (i.e. “Keep Sequence Settings”), all the clips you import after that automatically default to that setting choice (“Keep Sequence Settings”). -
I have never used crop marks before. I am trying to do an Illustrator tutorial intended for CS3. The instructions say:
"Select the square, and in the Menu go Filter > Create > Crop Marks. Increase the square size to 4.125in by 3.875in. This square will be the size of our image, which is 1/8in larger than the crop marks. This ensures no white-space when you or the printers cut these labels out."
I found a way to make crop marks in CS6 using effect>cropmarks. The problem is when I increase the size of the square it also increases the crop marks. But it says in the square will be 1/8in larger than the crop marks. What am I doing wrong?The instruction sounds a little odd they are referring to a bleed that is normally 1/8 inch larger than the caual trim size.
Their description is misleading from what isee since the neglected to mention bleed. Of course if everything is within the safe area then there is no need for bleed.
Here is a video showing what i think they left out or it is not visible in the text you display.
http://www.wadezimmerman.com/videos/CropMarks10UpLables.mov -
Tips! How to bypass new crop tool CS6, photoshop
Do you dislike the new crop function in Photoshop CS6?
I found out a way to handle and bypass the function so it works like in earlier versions.
1. First step is to change to classic mode (this is done in settings above the image a little "gear")
2. The second step is to change ratio to unconstrained.
The third step is the tip!
I was very frustrated that I could not start outside the picture to begin my cropping.
You know when you want to crop a landscape image of a portrait image and want to go from side to side.
The problem was that I started to rotate a crop frame that was there by default... REALLY CRAPPY FEATURE!
3. So here is the tip
Place your cursor is outside the picture
Before you begin dragging, hold down shift.
Begin the dragging, then let go of shift, and "tada" the crop frame behaves as it should.
I hope you found this info useful
Best Regards // DanielI don't see why your method is better than just using the new perspective crop tool (it allows you to start outside the image, use a specific size, and rotate the crop (by dragging from near/outside of a corner).
In a lot of cases want to go from left to right edge of the image.
From Original ratio:
To do it the "new" way means two step
Move down the upper edge, move up the lower edge.
From unconstraind:
To do it the "new" way means two step
Almost drag the area I want, move the edges out to left and right.
With my method I can easily drag the area I want in one movement.
at least a couple of problems with that: You still can't distort the crop lines (grab a corner and move it independent of the other corners) to fix perspective and such; and you aren't cropping to a particular size (which means you have to do it as a separate step after cropping).
I am sorry I could not find a way to do that easy...
And I agree to the common opinion, why limit something that works well, without having the option via settings to get it back. -
Data merge crash in ID CS6 server (but works in ID CS6 desktop)
I have a strange problem with datamerge solution of InDesign cs6 server.
There is a 20-page indd document and a 50-record csv file to be used along with it.
Creating merged document (using data merge) causes ID CS6 server to crash right after the moment the following line executes:
objDoc.mergeRecords();
However, strangely, for the same template file there is no crash in InDesign desktop counterpart.
I certainly seems that there is some inherent problem with data merge in the InDesign server. All data merge settings are same for both applications.
Even there is no crash if I directly export to PDF as follows:
objDoc.dataMergeProperties.exportFile(ExportFormat.PDF_TYPE, outputfile);
So, in summary for the same template file:
objDoc.mergeRecords(); // crash occurs in InDesign server but not in desktop counterpart
objDoc.dataMergeProperties.exportFile(...); // no crash at all
It would be a great help if someone can throw some light on this.This is two separate issues. The highlighting is a behavior change and not for the better inthe opinion of many, but nothing you can do about it at the moment.
Links, on the other hand, have ALWAYS been absolute, as long as ID can find them in the path stored in the file. Even if you copy a links folder from the server to the local machine, ID is going to ignore it and use the links on the server as long as they are there and you have a connection. -
We have 4 Iphones. As a family we have happily shared the same ITunes account and one AppleID. After the most recent iPhone IOS update all our contacts and calendars have merged and we randomly receive some messages that one of us has sent to another contact.
This is causing chaos.
Can anyone help me with:
1. Has anyone experienced a similar problem recently?
2. The records to the individual phones have not been saved been saved separately. After this merging of all the data into one composite record, is there anyway to reverse the change and restore the phones to just their individual records?
3. I guess that the cause may be the common AppleID. I have tried to create my own AppleID but my personal email address is already linked to the existing AppleID so I am blocked from setting up a separate AppleID in my own name. Does anyone know how I can get around this block?
4. Would it be better to create a separate Apple ICloud address for each of us as well? How do I do this?
Many thanks in anticipation,
PeterThis is exactly what happens when sharing a single Apple ID for iCloud and iMessage. Why would you expect any different?
-
Local calendars group ​disappeared - problem with saving in the local calendars group
Hello, I have been working with calendars. I wanted to add a new calendar to the iCloud calendars group or to local calendars ("On my iPhone").
I found that when I am switching off the iCloud for calendars, the iCloud calendar group disappears and don't create the local storage ("On my iPhone"). I did exactly the same on the iPhone 4S, and it created the local group. I don't know why it is different on iPhone 5, especially as I was using iOS 7.1 on both.
Has anyone else had this problem before? Do you know how to restore my calendar to the local storage?
Thanks for help.Solved this:
Turns out that we now require at least "List" permissions for "Everyone" for the root of the partition where the User profiles reside.
This was not the case on our previous images.
Hopes this helps someone else. -
Page cropping problem in Acrobat XI
I have a title built in InDesign that I export in PDF for the printer. I discovered over successive runs that I needed to shift the y axis a tad and widen the gutter to get the best production results. Here is the routine for doing so in Acrobat Pro IX:
in Acrobat
Document /Crop Pages / Change Page Size / Custom: width 6 in; height 9 in. [ set for each operation ]
Adjust y-axis (height) of text block
Y offset: - 0.15 (check shift visually)
Page range = all
apply to: odd and even pages
Adjust recto x-axis placement
X offset: + 0.13 (check shift visually)
Page range = all
apply to: odd pages only
Adjust verso x-axis placement
X offset: - 0.13 (check shift visually)
Page range = all
apply to: even pages only
I had to produce an new PDF body file for the first time since switching to CC (Acrobat XI), and when I finally found the page cropping dialogue, the above routine blew up the book completely. There wasn't a single character visible in 300+ pages. I take it that Acrobat XI has different ideas about cropping pages, but I couldn't see where the problem lies. The dialogue boxes look the same. The commands are the same. Only the results are different. ??
Any help much appreciated.
Richard Hurley
Grass Valley MultiMediaThis usually means the file is corrupt, probably because it was not created
using a standard application like Adobe Acrobat. -
ACS 3.3 Windows group mapping problem
Hi,
I?m running Cisco Secure ACS v.3.3 at Win 2000 server(sp4). ACS server is member of AD domain X. Additional there are two AD forests, so: domains X and Y are in the same forest, but domain Z is member of the second one. Trust relationships between all domains are established (AD Domain Controllers are w2k3 srv). I need to add Windows AD group mapping and that's no problem in domains X & Y. But when I'm trying to map some groups from Z domain, the "Failed to enumerate Windows groups. If you are using Active Directory consult the installation guide for information." error appears. In ACS documentation I have found information "ACS can only perform group mapping by using the local and global groups to which a user belongs in the domain that authenticated the user. You cannot use group membership in domains that the authenticated domain trusts that is for ACS group mapping. This restriction is not removed by adding a remote group to a group that is local to the domain providing the authentication." As I understand it's impossible to add mapping from the second forest? Am I right? If problem is solved in newer versions of ACS (4.0, 4.1)? Are there any fixes that can help?
Thanks,
PeterYou need to set up proxy.
http://www.microsoft.com/technet/prodtechnol/winxppro/deploy/ed80211.mspx
Look for "Cross-Forest Authentication" in above link. And you get the Idea of what I mean. Though in above link its depicted with IAS server, but same is possible with ACS, as both can act as Radius server.
There is a known bug, CSCsi04187
PEAP MS-CHAP machine authentication will fail with machine not found if host/ format is sent from client. This only happens if the machine is autenticating to a domain forest that the ACS is not a member of.
Conditions:
The Machine authenticating to ACS is in a different domain forest then the ACS and the supplicant is using host/ as the machine name format. You also have to be using PEAP MS-CHAPv2.
Workaround:
If the supplicant has the option you can send the macine name in hos/ format.
Many supplicants do not have this option.
It is to be fixed for ACS 4.2 release.
Regards,
~JG -
BPM: Messager Merge - Transformation Mapping Problem
Hi,
I tried an eg for time bound message merging (rather adding the items in the message).
I am using a single datatype/message type.
I was able to do the message mapping/interface mapping test by changing the source by making it 0 to unbounded and on the target I have same message type.
This test was successful.I went ahead with the creating the scenario .I used a file adapter for picking up a file. The message monitor shows it is picked it and sent to the bpm.
but the bpm part failed I checked in bpe monitor.It just says the mapping failed(transformation step).prior to which there is a receive step and container operation step which I used it for append the message .these are under a block and this block has a infinite loop for collecting the messages.There is a exception thrower(control step) which is for 2 minutes.this handled by a exception handler.and I guess my file was collected and send to the transformation step after this.but the thing is it never seems to appended since the two files are shown as two seperate error messages in transformation rather than as single ...
Can somebody tell what could be the problem/where to look for the file.
THnksI am getting more and more sure that the problem is at the block entry only...becoz i checked with direct entry to loop with a counter as loop breaker.it entered the loop and added the lines to the message with multiple lines.and once it hit the counter it came out and did the transformation successfully and sent it to the target system.
when i add the block it fail right at the block entry for the first message after that all the messages show the green flag clicking on pe would show an empty queue...
I guess the only step happening before the block is the correlation key creation i amn't sure if this is giving some problems..
NOW FOR THE BPM Steps....
1.I created the correlation key.
2.I put the block for the block i added the correlation key and exception name.
3.I put the exception branch and the deadline branch
4.on the exception branch i put the name of the exception to be handled.
5. on the deadline branch i put a 2 minute duration
6.within the deadline branch i put the control which throws the exception...
7.i added a loop to the block which is 1 = 1.in that there is a recieve step
8.after that there is container operation which adds the message to the list...
9.followed by outside the block i have a transformation and send steps..
10.the block is in default mode.
I tried creating the scenario completely again and again with different datatype etc to avoid the cache problem + workflow item locked problem...
but no luckk
THNks -
Activate problem CS6 master collection with original product key
Hello,
I have an original version of the Adobe CS6 master collection with a original product key. I use this version now or more than one year on my Imac with version Yosemite 10.10.2.
The last days i have the problem that my product key is not valid? How is that possible??
I re enter the product key for a lot of times but i can't reactievat my product.
Please help?
Arjan.Error "The serial number is not valid for this product" | Creative Suite
-
Spry menu problem - CS6 Dreamweaver
I wonder if anyone can help me with my spry menu problem which I have with a fixed 960px wide horizonal menu bar that has 8 items in it. The sub-menus don't seem to display properly when you click on them in that some of the submenus only show up at the end of the menu bar itself in Explorer browsers 8/9. Does anyone know of any code I can apply to fix this problem? I am new to spry menu features and so any help would be very much appreciated.
Also validate the rest of the code in your pages to see if you have any critical errors that need fixing. For example, a missing doc type declaration might explain Spry failures.
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
As an FYI, Adobe abandonded the Spry Framework late last year, after CS6 was released because Spry drop-menus don't hold up well on touch screen devices. If you can't get satisfaction with Spry, try jQuery Superfish. It's a better menu system.
http://users.tpg.com.au/j_birch/plugins/superfish/
Nancy O.
Maybe you are looking for
-
I have been upgrading hardware and software and have an odd problem. I moved from an old PPC Mac (10.4.9) to a new iMac (10.7.2). I first moved my iPhoto 6 library (actually 2 libraries) to iPhoto 11, and thought things were fine. I then decided t
-
'-' minus sign on the left side of the value
Hi all, My requirement is to put the minus sign appearing the amount field on the left hand side instead of right as it appears in the database fields. Is there any direct functionality for the same instaed of using concatenation .
-
Problem creating web service client using WSM Policies
Hello everyone, I'm trying to make a simple java client to a Web Service secured using a WSM 11gR1 policy (from Soa Suite 11.1.1.2.0). The policy on the server side is oracle/wss11_x509_token_with_message_protection_service_policy which I attached vi
-
Can you layer a Microsoft shape onto an image in Photoshop and change the color???
I'm using OS X Yosemite 10-10-1, Photoshop CC, 2014.2.1. I uploaded a shape from Word Office 2011 and layered it over my image. The symbol is blue and I want to change the color in Photoshop. I've tried but can't seem to figure out how it's done. The
-
Bluetooth is not working in my macbook pro
Hello, I just bought a new macbook pro and i am trying to use the bluetooth to comunicate with other devices, but my mac can´t detect other devices with bluetooth, i don´t think it´s broken, what should i do? Help.. Tavo...