Merging Itunes folders pre and post computer crash

I need to figure out how to merge my itunes folder pre-hard drive crash (i was able to retrieve my itunes folder) and post hard drive crash, then I need to put the merged file on my external hard drive or on my mac. Itunes is currently taking of 1/2 of the hard drive space on my pc (40 GB), so it needs to be moved.

Try this
http://www.digital501.com/20061019156/merge-itunes-libraries-rsync/

Similar Messages

I updated my ipod and my computer crashed during the update now the apps that come with the ipod such as the app store and itunes are not on my ipod how do i fix this

i updated my ipod and my computer crashed during the update now the apps that come with the ipod such as the app store and itunes are not on my ipod how do i fix this

Connect your iPod to any computer with iTunes installed, highlight your device and try syncing the apps only. If it doesn't work might have to restore through iTunes. With the new iTunes and iCloud beta, you can have the iTunes list what apps are missing on your device but if you had previously purchased in the past and then have iTunes install them. You should always get in the habit of backing up your iPhone whenever you do any firmware/OS updating/upgrading or transferring over to new device. I really really really really hope you can get back at least some of your old info. I will tell you this, I have been kicking myself in the butt for not routinely backing up my iPhone when my beautiful special iPhone 4 came up missing and had to revert back to my 3GS. iPhone 5 will be released in a few months so I am holding off on purchasing a new iPhone til then, not that I did so without reservation and a little bit of iPhone 4 withdraw.

I have been using a free trial of photoshop cc and my computer crashed. Now it says up to date, but the program is not installed anymore. How can I re install it? I already uninstalled creative cloud and re installed it, but the same issue occurs.

I have been using a free trial of Photoshop cc and my computer crashed. Now it says up to date, but the program is not installed anymore. How can I re install it? I already uninstalled creative cloud and re installed it, but the same issue occurs.

Hi dmomoney24 ,
Kindly refer : CC desktop lists applications as "Up to Date" when not installed.
Please revert if the problem persists.
Thanks,
Atul Saini

BW upgrade - pre and post upgrade reports

Hi All
Quick question please.
We plan to upgrade our BW ABAP system from NW 731 SPS7 to NW 740 SPS6.
I read the ASU toolbox note 1000009 and can see that there is no file for our scenario i..e from 73X to 740 so note 1734333 is the way to go here when prompted for ASU toolbox run. However within the note 1734333, it states "This note requires that all pre-requisites for the BW-related system copy automation are met according to note 1707321". When i read 1707321 it talks about installation procedure for PCA which is part of LVM, a licensed software. We don't have this license. Hence I am wondering if note 1707321 is applicable for us at all or is it that this note would bring about changes in the system and sets up a staging area upon which the Z report from the other note(1734333) builds and then creates task list for pre and post upgrade. I am certain that we will have to implement Z report from note 1734333 however the reference to note 1707321 has created some confusion.
Also once we implement the Z report from 1734333, the note says, the report needs not be transferred but the objects generated need to be. Would the author here referring to reports - SAP_BW_BEFORE UPGRADE and SAP_BW_AFTER UPGRADE and having them recorded into a transport. Any thoughts here please. If the author is indeed referring to these reports only, how do we know this will show up in quality systems via STC01 as input options.
Regards
Kalyan

I re-read the note again, It says, If task manager content notes(1707321) are not applied, we will not see reports for stopping RDA Daemons and Process chains i...e report RS_SYSTEM_SHUTDOWN. However we are on NW 731 SP7 so we already have this report. This means we can go ahead with implementing the Z report from 1734333 and forget about the other note. Have I comprehended it correctly
Regards
Kalyan

I want pre and post portal installation guide for EP 7.0 ?

Please give me links for portal(EP 7.0).Installation guide for pre and post installation steps to be followed.

Hi,
Refer this thread
Portal 7.0 Installation Document/Screen Shots
Portal 7.0 (ECC 6.0) Installation
Regards,
Senthil K.

Pre and Post for Sends..Confusion?

Dudes...am I crazy?
I have 2 tracks. One plays a vocal and one plays a guitar. Both are sent to the same Aux or Bus track with a reverb on it, via the sends on their respective channels.
If I solo the guitar track, I still get reverb tails from the vocal track on the bus channel as well as the guitar!
If I switch the vocal track send to "post", then the reverb tails go away for the vocal. By the way, I'm soloing from the mixer channels, not the arrange window.
Now I understand that if it were the vocal track that I had soloed then switching between Pre and Post on the send would dictate if I hear the reverb tails or not for the vocal track.
But that's not the track I have soloed! I have the guitar track soloed. So why would I hear reverb tails on a track that's not soloed. And why would the reverb tail go away on the vocal track if I change the send to Post, when that's not the channel I have soloed.
Am I crazy, or should logic know that if I have a track soloed, it should not play anything else but what's on that track? Regardless of switching from pre to post, if the vocal track is not the track that's soloed, why am I hearing anything from that track at all? I shouldn't have to mute the vocal track or switch it's send from pre to post, just to hear the soloed guitar track by itsself.
Thanks
Noah
G4 Dual 1.42 Mac OS X (10.4.6) 2 UAD Cards/Dynaudio/Martin/U47

You say you love Logic's "pre/post mute send solo safe function". Sounds like quite a function Does that mean it's changeable in Logic? You make it sound like it's an option.
By the way, I understand that if you solo a track, it might be cool to also hear it's effects channel without having to solo the bus track its feeding.
But why would I hear another tracks effects? This only happens when two different tracks have the same bus inserted in their sends. Just because I'm using the same send for two different tracks, doesn't mean I want to hear both sends even if only one track is soloed. That's the part that makes no sense for me. Solo should only address and isolate the track that's soloed and whatever else is related to it (ie...busses/sends/plugs etc..)
I dunno, I guess when you solo a track it keeps open the bus/send it's using unless your exercise the pre/post send option. And if there's someting else using that bus send as well, it must need to stay open for it too.
By the way, for me sometimes Logic will continue to play a certain audio track, usually a single track of it's choosing, even if another track is the only one soloed. There are no busses, no plugs, no sends on it, just a straight track and I still have to mute it after soloing some other track. Now that's not right...pre/post etc...is not in the equasion here, can someone explain that?
Thanks for the help.

Self programmed pre- and post trigger

Hello,
I am planning a measurement system and search some ideas for programming how to realize it.
I have an older NI PCI-6024E and want to measure 8 voltage signals with 2 kHz. When task is started it should run some hours without task stop.
Every 2000th sample (= every second), I want to store this sample (all 8 voltages) into a continuous file with printf.
For this I do not need the sampling rate of 2 kHz, 1 Hz would be enough but I want to do more:
Every time when voltage_1 increases over 1.1 V, I want to store all data – and 100 samples before – with 2 kHz into an other file till voltage_1 decreases under 0.9 V – and 100 samples after –. It will be like a self programmed pre- and post trigger with continious running measurement task.
I think I can work with an fifo-buffer (double fifo[10000 samples][8 channels]) but do not know how to do this on a smart way ;-)
Do you have any ideas how to mange it?
chemph

Hi Chemph,
since you have to use a DAQmx task to realize the data acqisition you can not change the sampling rate when the task is acquiring data. So I think the idea you mentioned is quite good.
You can implement a lossy queue so samples are deleted when they are not needed anymore.
For the logging you can keep keep over 100 samples in the queue and look for the 101st sample if it fits the rage you want. Then dequeue all elements from the queue and save them into a file. Afterwards save all elements in the queue until you find a value that does not match your requirements. Them you save another 100 samples and then continue from the beginning. I guess the file writing can be implemented in a state machine that represents the modi you want to save the measurement data.
I hope, this helps you with the concept.
Regards,
Melanie

Standard procedure pre and post BW SPS?

Dear Guru,
I have looked around but not able to find a good answer on a standard procedure/common practice as one implement BW support pack. After we implemented SPS21 in our production system this past weekend, we had endless data load issues but didn't happen in our test or QA system. I think I need a better list of what to do pre and post SPS.
Please share your experience on implementing BI support pack. What do you do pre and post SPS?
Many thanks in advance.
Chimei Shea

I re-read the note again, It says, If task manager content notes(1707321) are not applied, we will not see reports for stopping RDA Daemons and Process chains i...e report RS_SYSTEM_SHUTDOWN. However we are on NW 731 SP7 so we already have this report. This means we can go ahead with implementing the Z report from 1734333 and forget about the other note. Have I comprehended it correctly
Regards
Kalyan

Pre and post steps of client copy

Hi,
There are some client copy official guide?
I was reading the help.sap.com, but in this guide not appears the pre- and post- steps of the client copy.
More thanks

>>If i use the copy profile SAP_APPL, this steps will not be necessay,no? The user master data from target system will be maintained.
Yes. You are right. This Profile will not over right the User Master Record. It is given on the document.
http://help.sap.com/saphelp_nw04/helpdata/en/99/0a2a887e2511d2a6250000e82deaaa/content.htm
Regards,
Subhash
Edited by: Subhash.Chandra on Jun 3, 2011 3:18 PM

Pre and Post Aggregation

Hi BW Guru's
Can you Clarify what is Pre and Post Aggregation ?
Thanks in Advance

Hi Bhima,
look at http://help.sap.com/saphelp_erp2004/helpdata/en/13/18601823c6ff4daa0bb05b4cded814/content.htm
In the Time of Calculation field (inside BEx formula properties), you can choose whether the formula is calculated After Aggregation or Before Aggregation.
see more info in http://help.sap.com/saphelp_erp2004/helpdata/en/6f/56853c08c7aa11e10000000a11405a/content.htm
and above all in
http://help.sap.com/saphelp_erp2004/helpdata/en/bb/9e8b6b4d6f0d45b1efb5dfbc3b44a5/content.htm
Hope it helps!
(Bhima, don't forget to reward the answers !!!)
Bye,
Roberto

Pre and Post up gradation checks.

Hi Gurus,
Can someone please explain Pre and Post up gradation checks during converting 3.x queries to Net Weaver 2004 version.
Thanks in advance.

Hi,
Check these.
Upgradation from BW 3.5 to BI 7.0
Upgrading Bex Queries from BW3.5 to BI7
Regards.

Using iTunes 7 for Windows...and my computer crashes...

I downloaded iTunes 7 for PC, using Windows, and I have two issues, one minor and one major:
1) I can leave iTunes open and running on my computer, but when I start playing songs, after a few minutes my computer crashes to a blue screen...any help?
2) Also, after installing iTunes 7, my desktop icon is not the actual iTunes icon, it just shows up as a generic image icon...any help on this?
Any feedback would be much appreciated.

ryen531,
Since iTunes is showing the generic icon one the desktop, the install probably did not complete successfully.
I would recomend uninstalling iTunes, and reinstalling it.
This article has steps for removing iTunes, then download a the installer again, saving the file to the desktop, and then install it.
http://docs.info.apple.com/article.html?artnum=93976

Itunes 10.6 and 10.7 crash after installing icloud control panel

I recently upgraded itunes 10.6 to 10.7 on my windows home server 2011 computer and also installed iCloud control panel 2.0. After the upgrade itunes crashes within a few seconds of starting. I can see the status bar saying that itunes is accessing the store and then the itunes window goes away. I tried removing the icloud control panel, but itunes still crashes. I completely removed itunes and all related components and then reinstalled 10.6. At this point itunes works again so I tried reinstalling the iCloud control panel and not upgrading itunes, but itunes again crashes. So, it seems that regardless of the itunes version I can't run itunes and iCloud on windows home server 2011. Any ideas on a solution?

An update to my earlier post. I just upgraded to itunes 10.7 and icontrol panel 2.0 again, but before upgrading I turned off automatic downloads in the store preferences. I was able to launch itunes and even click on the store without itunes crashing until I launched the icloud control panel and logged in. Now if I click on the store in itunes it crashes. I tried logging out of icloud, but it still crashes, but only when i click on the itunes store. The error I see in windows event viewer is below. I've seen this error referenced in other posts, but have not found a solution yet. At least itunes is partially functional now.
Faulting application name: iTunes.exe, version: 10.7.0.21, time stamp: 0x504d85d9
Faulting module name: KERNELBASE.dll, version: 6.1.7601.17932, time stamp: 0x50327672
Exception code: 0xe06d7363
Fault offset: 0x0000c41f
Faulting process id: 0x18c4
Faulting application start time: 0x01cdc847d8c40580
Faulting application path: C:\Program Files (x86)\iTunes\iTunes.exe
Faulting module path: C:\Windows\syswow64\KERNELBASE.dll
Report Id: 3c14a4d1-343b-11e2-aa84-386077b091c9

Just installed Mavericks and my computer crashes 4-5 times a day now.

Hi. Just a few days ago I finally gave in and upgraded to Mavericks (10.9.5) from 10.6.8 as there was some software that I needed to use that necessitated the upgrade. Since I've upgraded, my MacBook Pro crashes at least 4-5 times daily. I am not doing anything unusual when it occurs. Usually typing an email, or switching between tabs in Safari or clicking save on a word file. In another post I was introduced to an app called Etrecheck which seemed to me to be a fine way to show all the Mac geniuses on this forum whats going with my computer (unfortunately I am not savvy enough to look through it and understand what's going on). I've posted the report below. Maybe someone can help me figure out what's causing my computer to crash?
The next time it happens I can also copy the report that shows up after the crash and post it as well. Many thanks in advance.
Problem description:
Since I downloaded Mavericks (10.9.5) my computer crashes randomly 4-5 times per day.
EtreCheck version: 2.0.4 (89)
Report generated October 15, 2014 at 8:07:20 AM EDT
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2010) (Verified)
MacBook Pro - model: MacBookPro6,2
1 2.66 GHz Intel Core i7 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics - VRAM: 288 MB
Color LCD 1680 x 1050
NVIDIA GeForce GT 330M - VRAM: 512 MB
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 9:9:52
Disk Information: ℹ️
ST9500420ASG disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (75.82 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R   UJ-898
USB Information: ℹ️
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Internal Memory Card Reader
Apple Inc. Built-in iSight
Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Toast 6 Titanium.app
[not loaded] com.roxio.TDIXController (1.2) Support
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.5.1) Support
[not loaded] com.IKMultimedia.driver.StompIO1 (1.0.0) Support
[not loaded] com.digidesign.fwfamily.driver (8.0.5f2) Support
[loaded] com.digidesign.iokit.DigiDal (8.0.5f2) Support
[not loaded] com.digidesign.mbox2.boot.driver (8.0.5f2) Support
[not loaded] com.digidesign.mbox2.driver (8.0.5f2) Support
[not loaded] com.digidesign.usb.elevenrack.driver (1.0.1) Support
[not loaded] com.frontierdesign.iokit.alphatrack (1.4.1f1) Support
[not loaded] com.ikmultimedia.driver.StealthPedal (1.0.0) Support
[not loaded] com.paceap.kext.pacesupport.master (5.9 - SDK 10.6) Support
/System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
[not loaded] com.paceap.kext.pacesupport.leopard (5.9 - SDK 10.4) Support
[not loaded] com.paceap.kext.pacesupport.panther (5.9 - SDK 10.-1) Support
[loaded] com.paceap.kext.pacesupport.snowleopard (5.9 - SDK 10.6) Support
[not loaded] com.paceap.kext.pacesupport.tiger (5.9 - SDK 10.4) Support
Startup Items: ℹ️
Digidesign Mbox 2: Path: /Library/StartupItems/Digidesign Mbox 2
DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
Qmaster: Path: /Library/StartupItems/Qmaster
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[running] com.amazon.sendtokindle.launcher.plist Support
[running] com.eastwest.server.plist Support
[running] com.frontierdesign.alphatrack.daemon.plist Support
[running] com.sony.PMBPortable.AutoRun.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[running] com.digidesign.elevenrack.helper.plist Support
[running] com.digidesign.fwfamily.helper.plist Support
[running] com.paceap.eden.licensed.plist Support
[loaded] PACESupport.plist Support
User Launch Agents: ℹ️
[invalid?] com.amazon.cloud-player.plist Support
[loaded] com.google.keystone.agent.plist Support
User Login Items: ℹ️
iTunesHelper UNKNOWN (missing value)
Dropbox Application (/Applications/Dropbox.app)
TomTomHOMERunner ApplicationHidden (/Users/[redacted]/Library/Application Support/TomTom HOME/TomTomHOMERunner.app)
Android File Transfer Agent Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
Internet Plug-ins: ℹ️
WidevineMediaOptimizer: Version: 6.0.0.12757 - SDK 10.7 Support
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
Flash Player: Version: 15.0.0.152 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.189
QuickTime Plugin: Version: 7.7.3
CitrixICAClientPlugIn: Version: 11.2.0 Support
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
iLokClientHelper: Version: 3.4 Support
iPhotoPhotocast: Version: 7.0
User Internet Plug-ins: ℹ️
WebEx64: Version: 1.0 - SDK 10.6 Support
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3
JackRouter: Version: JackRouter Support
Digidesign CoreAudio: Version: 8.0.5 Support
3rd Party Preference Panes: ℹ️
Citrix Online Plug-in Support
Digidesign Eleven Rack Support
DigidesignMbox2 Support
Digidesign Mbox 2 Pro Support
Flash Player Support
Perian Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      10% com.apple.WebKit.Networking
      7% fontd
      2% com.apple.WebKit.Plugin.64
      1% WindowServer
      0% configd
Top Processes by Memory: ℹ️
172 MB com.apple.WebKit.WebContent
125 MB WindowServer
112 MB softwareupdated
86 MB Safari
82 MB Mail
Virtual Memory Information: ℹ️
25 MB Free RAM
1.46 GB Active RAM
1.45 GB Inactive RAM
856 MB Wired RAM
2.11 GB Page-ins
414 MB Page-outs

Sure enough the computer just crashed a few minutes after posting. Here's the report after the computer rebooted:
Anonymous UUID:       40656744-595E-FDB7-F6E9-0497F4D35619
Wed Oct 15 08:27:05 2014
panic(cpu 0 caller 0xffffff7f9fa95f7c): "GPU Panic: [<None>] 5 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0xffffff80c5ad5000 0x0a5480a2, D0, P3/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.6.22/src/Apple MuxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 0), Frame : Return Address
0xffffff80b3abaf80 : 0xffffff801d622f79
0xffffff80b3abb000 : 0xffffff7f9fa95f7c
0xffffff80b3abb0d0 : 0xffffff7f9e11bf1b
0xffffff80b3abb190 : 0xffffff7f9e1e550a
0xffffff80b3abb1d0 : 0xffffff7f9e1e557a
0xffffff80b3abb240 : 0xffffff7f9e464056
0xffffff80b3abb370 : 0xffffff7f9e208ba9
0xffffff80b3abb390 : 0xffffff7f9e12296d
0xffffff80b3abb440 : 0xffffff7f9e120478
0xffffff80b3abb640 : 0xffffff7f9e121dc7
0xffffff80b3abb710 : 0xffffff7f9f086e1d
0xffffff80b3abb890 : 0xffffff7f9f086823
0xffffff80b3abb8a0 : 0xffffff7f9f04baf0
0xffffff80b3abb8b0 : 0xffffff7f9f04bb65
0xffffff80b3abb8c0 : 0xffffff7f9f037c51
0xffffff80b3abb8e0 : 0xffffff7f9f036fd9
0xffffff80b3abba60 : 0xffffff7f9f066940
0xffffff80b3abbb20 : 0xffffff7f9f035ad9
0xffffff80b3abbb70 : 0xffffff801dacf146
0xffffff80b3abbb90 : 0xffffff801dad0741
0xffffff80b3abbbf0 : 0xffffff801dace1af
0xffffff80b3abbd40 : 0xffffff801d6b6998
0xffffff80b3abbe50 : 0xffffff801d626bc1
0xffffff80b3abbe80 : 0xffffff801d6139c5
0xffffff80b3abbef0 : 0xffffff801d61e013
0xffffff80b3abbf70 : 0xffffff801d6c9b9d
0xffffff80b3abbfb0 : 0xffffff801d6f4196
      Kernel Extensions in backtrace:
         com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[D61B2BB9-4289-318D-9197-5E1E13B 1FF32]@0xffffff7f9e0cc000->0xffffff7f9e334fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f9dcbf000
            dependency: com.apple.iokit.IONDRVSupport(2.4.1)[D41125CE-69BD-32E7-9B1D-4E83431662DD]@0xff ffff7f9e0bc000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f9e079000
         com.apple.nvidia.classic.NVDANV50HalTesla(8.2.4)[B0E6AAA7-E970-3D81-8B43-145D56 A3A4AC]@0xffffff7f9e33f000->0xffffff7f9e5e8fff
            dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[D61B2BB9-4289-318D-9197-5E1E13B 1FF32]@0xffffff7f9e0cc000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f9dcbf000
         com.apple.GeForceTesla(8.2.4)[B0074750-2FC6-3E26-BEA0-5AD5469686CF]@0xffffff7f9 f024000->0xffffff7f9f0eefff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f9dcbf000
            dependency: com.apple.iokit.IONDRVSupport(2.4.1)[D41125CE-69BD-32E7-9B1D-4E83431662DD]@0xff ffff7f9e0bc000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f9e079000
            dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[D61B2BB9-4289-318D-9197-5E1E13B 1FF32]@0xffffff7f9e0cc000
         com.apple.driver.AppleMuxControl(3.6.22)[32862231-50BC-3AF6-87A2-703321AE4F90]@ 0xffffff7f9fa87000->0xffffff7f9fa9afff
            dependency: com.apple.driver.AppleGraphicsControl(3.6.22)[AA46D551-BE0F-33DA-93A3-8F46197BB 36F]@0xffffff7f9fa7f000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[045D5D6F-AD1E-36DB-A249-A346E2B48E54]@0xfffff f7f9df7f000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f9dcbf000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f9e079000
            dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[80899285-3952-30DA-A0F9-357C51E104 CF]@0xffffff7f9fa82000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
13F34
Kernel version:
Darwin Kernel Version 13.4.0: Sun Aug 17 19:50:11 PDT 2014; root:xnu-2422.115.4~1/RELEASE_X86_64
Kernel UUID: 9477416E-7BCA-3679-AF97-E1EAAD3DD5A0
Kernel slide:     0x000000001d400000
Kernel text base: 0xffffff801d600000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 8076473822747
last loaded kext at 654256352755: com.apple.filesystems.smbfs 2.0.3 (addr 0xffffff7f9fb9f000, size 335872)
last unloaded kext at 334416608476: com.apple.driver.AppleUSBUHCI 656.4.1 (addr 0xffffff7f9e8bd000, size 65536)
loaded kexts:
com.paceap.kext.pacesupport.snowleopard 5.9
com.Cycling74.driver.Soundflower 1.5.1
com.digidesign.iokit.DigiDal 8.0.5f2
com.apple.filesystems.smbfs 2.0.3
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.iokit.IOBluetoothSerialManager 4.2.7f3
com.apple.driver.AGPM 100.14.34
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleMikeyDriver 2.6.3f4
com.apple.driver.AppleHDA 2.6.3f4
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleMuxControl 3.6.22
com.apple.driver.AppleIntelHDGraphics 8.2.4
com.apple.driver.AppleIntelHDGraphicsFB 8.2.4
com.apple.GeForceTesla 8.2.4
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleMCCSControl 1.2.5
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleUSBCardReader 3.4.1
com.apple.driver.AppleIRController 325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.7
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.0
com.apple.driver.AppleUSBHub 683.4.0
com.apple.driver.AppleFWOHCI 5.0.2
com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleAHCIPort 3.0.5
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.AppleGraphicsDeviceControl 3.6.22
com.apple.driver.DspFuncLib 2.6.3f4
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.iokit.IOAudioFamily 1.9.7fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOSurface 91.1
com.apple.iokit.IOBluetoothFamily 4.2.7f3
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleGraphicsControl 3.6.22
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.nvidia.classic.NVDANV50HalTesla 8.2.4
com.apple.driver.AppleSMBusController 1.0.12d1
com.apple.nvidia.classic.NVDAResmanTesla 8.2.4
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.driver.AppleHDAController 2.6.3f4
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOHDAFamily 2.6.3f4
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.7.1d6
com.apple.driver.AppleSMC 3.1.8
com.apple.driver.AppleUSBMultitouch 240.10
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.7
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.7
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.7
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOEthernetAVBController 1.0.3b4
com.apple.driver.mDNSOffloadUserClient 1.0.1b5
com.apple.iokit.IO80211Family 640.36
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IOUSBFamily 686.4.1
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0
Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.66 GHz, 4 GB, SMC 1.58f17
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.7f3 14616, 3 services, 23 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST9500420ASG, 500.11 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: Hub
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Internal Memory Card Reader
USB Device: Apple Internal Keyboard / Trackpad
USB Device: Hub
USB Device: Built-in iSight
USB Device: IR Receiver
Thunderbolt Bus:

Merging iTunes accounts on the same computer...

I split my computer into two accounts, one for work, one personal. The idea being: I keep all of my work stuff on one account, personal stuff on personal account. BAM! keep the company computer.
But now, I have two separate Itunes accounts. And i've been getting most of my music during work. ****.
How can i bring everything over to my "personal" Itunes account? Is there a way to merge these two accounts? They're on the same computer...

on the work account, move the iTunes music (or media) folder from <MacintoshHD>/users/<workname>/music to <MacintoshHD>/users/shared.
log into the home account, launch iTunes, select the add to library command from the file menu, and navigate to the iTunes music folder in the shared folder. or drop the iTunes music folder from shared into the automatically add to iTunes folder inside the iTunes folder.

Merging Itunes folders pre and post computer crash

Similar Messages

Maybe you are looking for