Merging SAP Clients - Reporting on Cross Client Table Compare Results

Hey folks,
We are trying to merge two clients into one (on the cheap), i think that cross client table comparision is the best way to find differences and possible issues and clashes with the two systems configuration, but i was wondering if there is anyway to report on these differences, so we can pull them out to word/excel document to anaylse and document them prior to making the changes.
Does anyone know if this possible?
Thanks a lot,
Greg

Hello Mr. Newman,
I think using SCU0 is going to be the way to go but the output is not always the best. However you should be able to show the differences and download to excel to analyse further. If this doens't fit then I think you will have to look at copying the tcode / report and improving the output to meet your needs.
Alternatively post to basis folks and see if they have some better ideas!
Hope this helps,
Cheers,
Dan
Edited by: Danny boy on Mar 31, 2010 3:00 PM

Similar Messages

  • Split database to client specific and cross client

    Hi
    Do we have a known method to split an existing MaxDB database into two .
    1. Client Specific database
    2. Cross client database
    Thanks and Regards
    Sri

    What you can do is to use TDMS (Test Data Migration Server), it´s a separate product and it enable you to setup test/training systems with a reduced amount of production data.
    This system makes use of technologies to determine, whether a table is client depend and client independent.
    Your problem is, that the client specific data NEEDS the cross client data, it relies on the customizing, that is cross client.
    If your pupose is to e. g. extract some kind of data because parts of your company was sold or if you bought a new company, then you should contact the SLO group (http://service.sap.com/slo) that does those kinds of "separations" too.
    From a technical level, it´s certainly possible but wihtout knowing your initial intent why you want to do that, one can give just advises, what we "think" what the reason might be.
    Markus

  • ALV - To diferrentiate client specific and cross client data

    Hi,
    In an ALV grid , i am suppose to show the client specific data  and cross client data. I dont know how to differentiate these 2 type of records. Is there any standard icons available to differentiate cross client and client specific data.
    Refards,
    Jey

    > Its fine, is there any other way  to differenitate these 2 by some icons.
    It is up to you to differentiate them using Icons or may be coloring differently...
    Based on the Client you can populate the icon/color information.

  • How to create cross-client variant?

    Hi Experters:
    Can someone tell me how create cross-client variant in ECC6.0?
    in 4.6, we can define the client or define cross-client transaction variant,
    how to create cross-client variant in ECC6.0?
    Regareds,

    Hi,
    In se93 there is a check box cross-client .
    The Cross-client switch identifies which transaction variants are cross-client and which are client-specific. If the switch is set, the transaction variant is cross-client. If the switch is not set, the transaction variant is client-specific.
    A client-specific transaction variant can only exist in the client where it was created. The field contents of the transaction variant only have to be available in the particular client. A cross-client transaction variant is available in the system regardless of which client is currently active. The field contents of the transaction variant have to be available in all clients.
    http://****************/Tutorials/ABAP/TransactionVariant/Create.htm

  • Client independent settings / crioss client

    Hi all
    How do i identify the clint independent/ cross client settings in sap ? 
    Any table ?
    Regards
    Swapnil
    Edited by: swapnil  kelkar on Nov 28, 2009 12:06 PM

    Hi Swapnil,
    Your question is wrong...as client independent and cross client both are same
    Client dependant and cross client customizing are different
    All client dependant changes will effect only working client, and all cross client changes will effects entire system.
    All cross client setting get store in T* tables (ex"T000)....
    Regards
    Nick Loy

  • Need to find All Custom Reports which are based on SAP standard reports

    Hi Specialists,
    I would like to find out all the customized reports which are a copy of SAP standard reports in the client's system.
    For Eg. RPCP11G0 is the SAP standard report which has been customized & it's code has been re-written into a Custom report i.e. ZGBPPYMP001_P11D.
    I would like to know all such occurences in the system.
    Steps already done:
    1) Tried searching with RPR_ABAP_SOURCE_SCAN & RS_ABAP_SOURCE_SCAN.
    Please suggest .
    Thanks
    Abhinav.

    it's only possible with an tool-program
    when your developers have not change the line with the REPORT-command.
    e.g.
    standard-report is RAGITT01
    copy is ZC_RAGITT01 or sth like this
    but report line is unchanged in copy:  "REPORT RAGITT01 MESSAGE-ID AB..."
    solution:
    select all reports from TRDIR/TADIR  from your Z/Y-device classes
    and analyse the reports with
    read report ZC_RAGITT01 into wa.
    and use find for searching 'report-command'.
    and check whether the result of that finding is an standard abap
    hope that helps
    Andreas

  • SAP- Webi Report Export to Excel

    Hello ,
    I have Report developed in SAP Web intelligence .Report Displays dept wise annual summary.Now export to excel functionality generates one single excel sheet with all dept wise data in one single tab.
    Is it possible to SAP webi to generate separate tab for each dept  in a single excel file after exporting it into excel.
    So suppose i have 12 dept details in sap webi report in cross tab format  so after exporting into excel 12 separate tabs get created one for each dept into a single excel file
    Thanks & Regards
    Gourav Joshi

    Hello Anuj,
    I don't want to use Busting Here and Even Don't want separate excels per department.
    I am looking for excel export functionality.
    i.e Suppose i have result set for 4 different Departments in SAP Webi Report. l am expecting export-excel functionality such a way that 4 separate tabs(Sheets) gets created  for 4 different departments into one single excel after exporting report into excel.
    I used breaks at section levels but that does't not worked out for me
    Any help would be greatly appreciated!!!!!

  • SAP BI Cross Client

    Hi SDN Guru,
    Actualy my Customer using 3 Landscape in ECC Systems Dev,Qty, Prd. But in SAP BI using only two Landscape
    Dev & Prod.
    Actualy Mapping with  ECC Dev to  BI Dev Sys , But, Unfortunately my management asking please collect the data from ECC QTY to BI Dev.
    We have only data's avilable ECC Qty, there is no data in ECC Dev.
    My Question is how to collect the data in different Client (or) Cross Client.
    *how to connect cross client then how to extract the data from ECC Qty to BI Dev System.
    Can you please provide me solution ASAP...
    Thanks in Adance Guru's.
    Regards,
    Kumar

    Hi,
    You have to map your ECC QUA to BI Dev system.
    Communication Setting between BW and R/3
    Step 1: Define Logical System in R/3
    Step 2: Assigning Logical System to Client
    Step 3: Setting Up an RFC Destination
    Step 4: Distributing Data Model
                  Message Types Involved in Process of Data Loading
    Step 5: Generating Partner Profile
    Step 6: Maintaining Message types in T-Code WE20
    Cross check the system mappings in RSLOGSYSMAP table in both systems.
    You can search some step by step docs in SDN.......
    Regards,
    Suman

  • Cross client database tables

    Hi ,
    can someone please let me know any cross client database tables in SAP R/3..
    Thanks,
    Raghav

    Hi Raghavendra Manchippa  ,
    Any table which have a field MANDT and it should be Primary Key so that table be Cross Client Table..
    If satisfied,,,rewards me..
    Kind Regards
    Yogesh Gupta

  • Reporting Services - How to open a second table inside report, for each number of client (each apears in first table)

    Reporting Services - How to open a second table inside report, for each number of client (each apears in first table)?
    Exemple:
    Table1
    Cliente name:
    John
    Client number:
    12345
    Survay number of negative answers:
    3
    Table2
    Questions and answers that were negative:
    Question: How much time where you waiting
    Avaluation: 3 (from 1 to 10)
    Answer: They only called me 1 mouth later
    Can you please help me?

    Hi,
    Based on the description, I understand that you want to add subreport in the main report. When previewing the main report, the subreport can be shown in detail. Please see the screenshots on my test:
    In Reporting Services, we can create parameters and pass them from main report to subreport in order to control the data dynamically.
    References:
    Subreports (Report Builder and SSRS)
    Add a Subreport and Parameters (Report Builder and SSRS)
    If I have any misunderstanding, please feel free to contact me.
    Regards,
    Heidi Duan
    Heidi Duan
    TechNet Community Support

  • How to disable Cross client Table Access

    Hi All,
    i have created a Sand box client and i have set its cross client object value to
    "No Changes to repository and cross client customizing objs"
    but still users are able to run transactions like SR13 which are cross client tables
    please help

    HI Zeeshan,
    Once u run the Tcode like SR13, the users would be able to enter the Tcode and have a new entry varinat created..but during SAVE the system would sure prompt the message... " Changes to Repository or cross-client Customizing are not allowed. Please press DISPLAY or CANCEL" ..
    so the changes would not be saved hence forth and have to be cancelled out..
    hope this is what u have been looking for..
    Br,
    Sri
    Award points for helpful answers

  • Is SAP BI reporting is possible in ECC 6.0 with same client

    Hi all,
                             My requirement is, we need to design SAP BI data flow in ECC 6.0 with same client only.  Now I am designing the BI data models as per the requirement of SD sales reports in ECC 6.0.For this, when i was extracting the data from SD datasource(2lis_11_vahdr) in RSA3 its showing 0 records,actually  as per VA01 some records are available but its not showing in the RSA3.
                              My doubt is , is it possible to extract the data from ECC 6.0 and load the data to the datatargets  and get the SAP BI reports in ECC6.0 with the same client.
                              Please suggest as soon as possible.
    Thanks

    It is possible to load the data from the same client. It all depends on the source system and the client which has been connected in the RFC connection.
    Let me know if this helps.
    Regards,
    Avinash

  • How to create a cross-client table maintenance dialog?

    Hello everybody,
    I have a client specific table (mandt is the first key field) that should be maintained cross-client: In the table maintenance dialog, I want to change/create/insert values belonging to clients other than the current logon client. Can I do this with a generated maintenace dialog? If yes, how?
    Thank you for your help, regards, Kathrin!

    Hi Kathrin,
    I think you can't, you must create your own dialog maintenance program.
    They are some program to copy data from client to others .. but never seen any dialog cross client. (or remove the mandt  in your key).
    Regards
    Frédéric

  • Construing a report writer with a table of client - Table YSCO_BASE_ALOCAC

    I am construing a report writer with a table of client - Table YSCO_BASE_ALOCAC
    When I definition the library, the message is show...
    Table YSCO_BASE_ALOCAC is not installed in Report Writer.
    Message no. GR 493
    Diagnosis
    The Report Writer can only report on tables if the attributes of these tables that are relevant for reporting are defined in control tables. This is not the case for table YSCO_BASE_ALOCAC.
    Where I can to make this configuration?

    hey thanks again
    i tried it it works fine..
    WITH     e     AS
         SELECT     consultant , client , project
         ,     task , effort ,date_  , billable
         FROM    trial_3_details
    SELECT     *
    FROM     e
    PIVOT     (     sum (effort)
              FOR     date_     IN     ( '07/22/2013'     AS monday ,
                                         '07/23/2013'    as tuesday,
                                        '07/24/2013'    as wednesday,
                                         '07/25/2013'     as thrusday,
                                         '07/26/2013'     as friday,
                                          '07/27/2013'     as saturday,
                                          '07/28/2013'     as sunday                        
    CONSULTANT
    CLIENT
    PROJECT
    TASK
    BILLABLE
    MONDAY
    TUESDAY
    WEDNESDAY
    THRUSDAY
    FRIDAY
    SATURDAY
    SUNDAY
    Syed
    Facebook
    Security
    Privacy Settings
    N
    Syed
    Google
    Security
    gmail privacy features
    Y
    8
    Patel
    Dell
    Recruitment
    Profile Detailing
    Y
    Sanjay
    Google
    Software
    Webpage development
    Y
    John
    Dell
    Hardware
    Processors
    Y
    Steve
    Lenovo
    Administration
    Attendance
    N
    Syed
    Yahoo
    Security
    Firewall Check
    Y
    Sanjay
    Google
    Software
    debugging
    N
    Steve
    Microsoft
    Adminstration
    Attendance
    N
    Steve
    Yahoo
    Adminstration
    Attendance
    N
    One more question how do i automatically set the days instead of explicitly declaring it every time?? and also i want to add one more column
    which gives overall week 'effort' of a consultant..

  • Cross client tables

    Hi,
    I am trying to authorize a user for maintaining the cross client tables with SM30.
    I have added the Authorization object S_TABU_CLI with the change permission and regenerated
    the profile and assigned to the user. But the user is still unable to maintain the cross client tables
    like V_DDAT. How to enable a user to maintain cross client tables.
    Thanks in Advance,
    Ramakrishna.

    One thing. I saw in your response that you have not assigned an authorization group on S_TABU_DIS?
    This is necessary, as the system always checks on the auth group.
    If the table is not classified in TDDAT, it will check against &NC&.
    Tables are protected through S_TABU_DIS for client-dependant tables AND S_TABU_CLI as extra protection fro cross-client tables.

Maybe you are looking for