Merging two photos to make one

I have two photos that I want to take and combine them to make one. I was recently at my Dad's funeral and I was taking pictures of my step mom receiving the flag. Well I was to close to get one shot so I took two. One of the Officer giving her the flag and one of her. I want to join these to make one photo. Anyone have an idea how I can do this.  Thanks

The 2 pictures should have the same resolution, since you took them sequentially with the same camera.
However, the lighting may be at variance, especially if you used flash.
If this is the case, then in order to get a good result, you may want to select the flag officer, and then your mom, as separate objects, without any background.
Open a new, blank file with the same resolution as the pictures
Copy/paste the two pictures. Each will be on its own layer. Enhance them with levels, and/or brightness-contrast . Position them with the move tool, and resize if necessary
Add a new background that is pleasing, and add a frame or stroke.
Finally, you may want to sharpen a bit.

Similar Messages

  • HT204053 Can you merge two Apple IDs into one?  It was a common issue caused by the iPhone 4 and has been corrected, but transferring purchases in iTunes is a pain with two IDs.

    For a brief time when iPhone 4, iOS 4 came out, many of us ended up with two Apple IDs.  I want to know if anyone can please provide me with simple step-by-step instructions on merging two Apple IDs into one?  It would make transferring purchases on iTunes much easier and reliable.  I realize i desperately need an iOS update, but i had no laptop for over two years!  I'm posting a cry for help on that in another community.  Thank you all.

    No,
    Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.

  • Merge two PDF files into one with Adobe Reader

    Does anyone know how to merge two PDF files into one with Adobe Reader. Is it even possible?
    Thanks

    If you've got a Mac and OSX you can do this in Preview.  Make sure you can see the sidebar with the first PDF opened, and then drag the second PDF to the bottom of the last page in the sidebar.  Also you can reduce the size of your saved file by selecting (or making) a Quartz filter to 'reduce file size'
    Cheers

  • How to merge two storage drives into one partition-help

    THis is on an iPad-Please excuse for any typos
    I Am working on a project of restoring a macbook pro from old parts that I found. It works!!! But the HDD that i salvadged is ancient and gets about .15 MBPS. Not good. Its an apple certified and apple branded toshiba HDD-500G at 5400RPM. Yeah. *****
    I am considering buying a new hard drive as a 480GB SSD, and using OWC's Data doubler, adding a second HDD, for all the photos and vids i will be collecting through my work in video and photo. I am considering getting an SSHD (SSD+HDD in an SSD form factor) and using this as the second drive. its not much more expensive (like 10$ more) and itgetsme semi-SSD like performance on a mass scale of storage.
    HOw can I combine these two drives into ONE partition? 480GB will take awhile to fill up, but this is a future proof wall to use.
    I Will eventually invest in an external storage option (2-3 HDDS in one caddy for backups and storing 1080p video all under one roof. depends if the board im using actually has thunderbolt or usb that is fast enough-because of the crappy hdd i cant get it to boot into an OS or go through usb recovery without it freezing. I ahve tried re-applying thermal paste, still doesnt help)
    HOw can i easily partition these two drives into one?
    also, my friend needs a new HDD because bootup times in his macbook pro are at like 2 mins+ and hes running Core 2 Duo, with 8 G ram and 10.9 (Mav) should i recommend an SSHD or an ssd. (He doesnt want an HDD, hes had bad 'voodoo' with em'. Thanks!

    nithya_ram wrote:
    Give me d source code for merging two img files into one img file\\
    If you want someone to do your work for you, simply pay someone. However, if you have a question about code you're currently working on, feel free to ask a specific question here on the forum.

  • Merge two differents tables in one new structure

    Hello guys,
    How can I merge two differents tables in one new structure (workarea) dynamically?
    For example, merge MARA and MARC in a new structure that contains all fields from MARA and all fields from MARC.
    In this case, it isn't necessary that identical fields be repeated (MATNR).
    Can you help me?
    Thanks!
    Kleber

    Hi,
    Use include structure like:
    data begin of itab occurs 0.
            include structure MARA.
            include structure MARC.
    data end of itab.

  • Can I merge two photos vertically instead of horizontally?

    Can I merge two photos vertically instead of horizontally?

    I don't understand the question. Please provide additional information as to just what you wish to do.
    For example, do you wish to display and print two portrait oriented photos side-by-side?

  • Insert PDF into new Adobe Form - merging two PDF files into one

    Hi everyone,
    I need to enable access to archive PDF files but within a new PDF file containing header and footer.
    Request is not to change archived PDF files at all.
    I use Web Dynpro application to upload PDF file and to display new PDF file.
    I thought converting archive PDF files into JPG files and than using an 'Image Field' object to display those in a new PDF file.
    I am dealing here with PDF version 1.3 files.
    I am also having trouble converting these PDF files into JPG files. Any sugestions one this problem?
    Does anyone have any suggestion on how to deal with this concerning the fact that archive PDF files can not be changed?
    Is there some other way to merge two PDF files into one using Adobe Designer?
    Regards,
    Amel

    Hello, Lukasz:
      I am also facing similar requirement from my customer.
      And I found one useful blog, hope this blog can help you.
      http://wiki.sdn.sap.com/wiki/display/WDJava/CombinePDFfileswithWebDynproforJava
      Best regards, Nick.

  • How to merge two WD components in one WD application?

    Hi SDN,
    Can any one tell me How to merge two WD components in one WD application?
    suppose i have two WD componets z_comp1 & z_comp2 now i want to use both these components in one WD application.
    Regards,
    Rahul.

    hi rahul...........
              you can use any number of wd components into one component.
    eg:
            consider you are having 2 components 'A' and component 'B' and you want to embed both into component 'C'.
           You can just click the 'Create' icon which will be present in the properties tab of the component controller.
           you mention the name of bothe components 'A' and 'B'.
            So now the interface controller of both the components are created in component 'C'.
           Now you can use the views present in both the components in component'C'.
    --regards,
      alex b justin

  • How to merge two photos

    I am new to photoshop cs4 extended, I previously had elements 6. I have two photos of dogs and want to merge them into one. How can I do that and keep the proportion of the dogs proper even though the photos are not proportionate? One photo closer up than other, but when I merge I want dog sizes to be proportionate. Can this be done, and if so, how? I really appreciate all your help, you have been wonderful. Thanks.t

    if you mean like the photo below it is done by
    copying the photo of the dog on the left to the image of the dog on the right.
    then selecting the layer with the dog on the left and giving it a transparency of 50% in the layers panel (so you can see what you are doing.)
    then using the free transform tool and using the corner anchor points and holding the shift key while scaling the image until they look right to you.
    then you either use the eraser tool to carefully erase the unwanted background on the top layer with the dog on the left (btw you have to reposition the dog on the left to actually be on the left after you scale the dog,) or you use the pen tool to create a ath defining the dogs outline and turn that into a selection and hit delete to remove the background.
    the above requires skill and a little patience.
    then you position the dog on the left, if you want you can place it on the right.
    then once you are happy with the scale  and position and removal of the background you can adjust the color and tonal quality using the Curves and
    or Hue Saturation adjustments and perhaps the dodge and burn tools as well.
    The way you sue the adjustments on just the dog on the left since it is on its own layer is to hold the command (control) key down while clicking on the layers icon in the layers panel which will only select what are active pixels on that layer.
    Once you have it selected you can then select an adjustment to make which will be previewed and applied to only that selected area.
    You have to select it for each adjustment you make that you want to only apply to that region.
    Very cute couple!
    Merry Christmas!

  • How to merge two Apple IDs into one?

    Is it possible to merge two IDs into one?  I don't want to use the 'hotmail.com' extension anymore.

    No. All purchases remain tied to the AppleID used to obtain them and cannot be transferred.
    tt2

  • Merge two mono files to one stero file

    i want to make two mono tracks into one stereo track where one is the left part of the the stereo track and the other the right part...i thought i had done that a long time ago...if possible, how do i do that?
    thx,
    Brick

    Split Stereo files can be converted to Interleaved files. Do that in the Audio window (Copy/convert file).

  • SCCM Query to merge two different collections to one

    Hi Team,
    I wanted to merge two different collections e.g. NY and LA collection in one single all US Collection. I wanted to see all PCs under US collection. NY and LA computers are manually updated in collection i cannt use there query. 
    Waiting for your response.

    If you already have to two collections you can do something like this
    select
    SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client
    from SMS_R_System where SMS_R_System.ResourceId in (select ResourceId from
    SMS_CM_RES_COLL_XXXXXXX) or SMS_R_System.ResourceId in (select ResourceId from
    SMS_CM_RES_COLL_XXXXXXX)
    John Marcum | http://myitforum.com/myitforumwp/author/johnmarcum/

  • Using two computers to make one fast one?

    Is it possible to use two imacs linked together to make one fast computer? Like a master/slave computer set up? If so how?

    Although I do not use it, XGrid looks to do what you want.
    It is a free download and you can get it here.

  • How to merge two crystal reports into one in Delphi using TCrpe?

    I am absolutely new to Delphi and Crystal Reports. I figured that I can export a crystal report to pdf like this:
          crpe.Clear;
        crpe.ReportName := 'BasicInfo.rpt';
        crpe.ParamFields[0].CurrentValue := '0';
        crpe.Output := toExport;
        crpe.ExportOptions.Destination := toApplication;
        crpe.ExportOptions.FileName:='C:\CoverSheet.pdf';
        crpe.ExportOptions.FileType:=AdobeAcrobatPDF;
        crpe.Export;
    (Although this is working, please let me know if I am doing it wrong )
    My main problem here is: I have two .rpts "BasicInfo.rpt" and "Details.rpt" and I need to create one pdf out of them in Delphi.
    Is there any way to merge two .rpts and export it into one pdf in Delphi?

    You cannot merge two reports into one PDF - not in any CR SDK. There are 3rd party utilities that will let you do this, but no APIs for this in CR.
    BTW.; What version of CR are you using?
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • Merging two LDAP directories into one clean 10.4 server.

    What I have now is two different OD masters. One is a 10.3.9 server and the other is a 10.4.9 server. What I want to do is combine the two Open Directories into one on a brand new Xserve 10.4.9 install, and make that my only master with several replicas.
    I'm trying to do as much research as possible before attempting this feat. I haven't been able to find much on here via searching. I did however, find this link (http://www.afp548.com/article.php?story=20050615173039158&query=migrate), which should be quite helpful, but I was wondering if anyone on here had anymore input.
    Thanks in advance.

    Hi Celia
    I think you could achieve this using slapcat with a bit of ldapadd/ldapmodify? Manual pages should tell you more?
    Not done it myself with 10.5 but I don't see why not? Export desired information as LDIF file(s). You could do it for for both LDAP Servers and then bring them in. They should just add to each other?
    Worth a try?
    Tony

Maybe you are looking for