Merging two Prime Infrastructure instances

Hi,
We have two separate CPI 2.0 servers with one managing the wired network and the the other manages the wireless components. One option is manual device export, template creation etc from source CPI to target CPI. But is it possible to selectively backup / export db on the Wireless CPI and merge restore / import db on the Wired CPI ? The existing wired CPI will than be used to manage both wired and wireless and the other CPI instance (formally for wireless) decommissioned.
The manual option is what I am thinking but just checking if two CPI's can be merged !
Thanks,
Rick.

Hi Rick,
AFAIK, Selective backup and Restore is not possible in PI so what you are possibly trying to achieve is unfortunately not possible.
Only thing you can do at the moment as mentioned by your export and import devices..
Thanks-
Afroz
****Ratings Encourages Contributors ****

Similar Messages

Prime Infrastructure Demo License

If I apply the Demo license to a licensed Prime Infrastructure server will it enable all the features so I can test the Netflow features for the demo period? I have never used the Netflow features and would like to test drive for a little and decide if we want to move of our current platform.
Thank you all.

You purchase licenses to access the Prime Infrastructure features required to manage your network. Each license also controls the number of devices you can manage using those features.
You need a base license and the corresponding feature licenses (such as Assurance or Data Center licenses) to get full access to the respective Prime Infrastructure features to manage a set number of devices.
If you have installed Prime Infrastructure for the first time you may access the lifecycle and assurance features using the built-in evaluation license that is available by default. The default evaluation license is valid for 60 days for 100 devices. You can send a request to [email protected] if:
You need to extend the evaluation period
You need to increase the device count
You already have a particular feature license and need to evaluate the other feature licenses
To troubleshoot licenses, you will need to get details about the licenses that are installed on your system. Click Help > About Prime Infrastructure to access your license information.When troubleshooting licenses, it is important to remember that Prime Infrastructure has five types of licenses:
Base: Required for every Prime Infrastructure installation. The requirement stems primarily from the need to do accurate royalty accounting by knowing how many Prime Infrastructure instances have been purchased. A Base license is required for each instance of Prime Infrastructure, and is a prerequisite for all other license types.
Lifecycle: Regulates the total number of devices under Prime Infrastructure management.
Assurance: Regulates the total number of NetFlow devices under Prime Infrastructure management.
Collector: Regulates the total number of NetFlow data flows per second that Prime Infrastructure can process.
Data Center: Regulates the total number of data-center devices under Prime Infrastructure management.This license type was introduced in Prime Infrastructure version 2.2.
All five types of licenses are supplied as either evaluation or permanent licenses:
Evaluation: These licenses permit or extend access to Prime Infrastructure for a pre-set period. You can apply only one evaluation license of each type (that is, only one Lifecycle evaluation license, one Assurance evaluation license, and so on). You cannot apply an evaluation license over a permanent form of the same license.
Permanent License: These permit access to Prime Infrastructure features as specified and are not time-limited. Permanent licenses can be applied over evaluation licenses, and can also be applied incrementally (that is, you can have multiple permanent Assurance licenses, and so on).
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-2/administrator/guide/PIAdminBook/licensing.html#pgfId-1055426

Cisco Prime Infrastructure 2.1 High availability Question

Hello All,
I am configuring high availability for two prime infrastructure 2.1 servers. I have configured manual HA between the servers. I need to know what will be the configuration in the devices ( switches,routers etc.) for proper working of the HA. For example
Should we need to configure both the prime infra servers as snmp hosts in the devices??. If we have to when an event happens the switch well unnecessarily send the traps to the secondary even when the primary is alive??.
If anyone has a copy of the configuration of such a set up please share it with me.
Thanks and Regards
Shabeeb

Hi Shabeeb,
You are correct on that part that unnecessarily devices will try to send traps to the secondary server if you specify that in the device's config. I don't think it should be a concern , this is expected.
otherwise you need to configure them later once the PI server fail over to secondary .
If you have any other doubt ,kindly ask.
Thanks-
Afroz
***Ratings Encourages Contributors ***

Prime Infrastructure 2.1.1 cannot add more than two interfaces in Dynamic Interface Controller Templates

Cisco Prime Infrastructure is a damned nightmare of browser bugs (some features work in IE8, some in IE9, and some only in Firefox). And I am not sure if what I am experiencing is a browser bug - or a real bug - or something that I was able to do before and can't any more? I would love for someone to either explain why this is happening to me, or reproduce the bug!
I'm running Prime 2.1.1. I am doing this ...
Configure > Controller Template Launchpad
System > Dynamic Interface
Select a command > Add interface (GO)
Enter all the properties - roll to the bottom of the page, and click Apply to Controllers
I have four controllers. And normally I would add an interface for each controller. But I can only create two out of the four. It doesn't matter which two I choose. When I click Add under Manage Interfaces for the third controller, I cannot click the Done button to apply it (see screenshot, attached). I have found that if I change the VLAN to something else, it will let me save it. But ... why? I went back and reviewed all of my existing interface templates and I am not doing anything different. Although, they were all created a long while ago using WCS 7.x.
Any help, guidance, or confirmation of insanity would be appreciated.
-Steve Ballantyne

I doubt I will get any hits on this here but I always try. I opened a TAC case. I will come back and comment on whatever they find.

Cisco Prime Infrastructure 1.3, Mail Configuration

Hi,
I have a Cisco Prime Infrastructure 1.3 and I want to set up the mail. When I test it, I get this error:
Failed to send mail to primary SMTP server. Failed to send mail to secondary SMTP server. Please make sure that you save mail configuration by hitting 'Save' button.
I have the ip address, and the username and password. Do I need to create a new buzon for the prime? because by default the "From" field appears with
[email protected]
Thanks!!

Some extra info that has just come to my attention. At one point we were running (we're actually still running) CiscoWorks with LMS3.2 and Cisco NCS 1.x. I merged these two things together into Cisco Prime Infrastructure (upgraded the licensing to get 450 lifecycle licenses to cover the APs + all of the devices coming from LMS3.2). I followed all of the documented procedures to upgrade the NCS appliance to Prime Infrastructure. But when I type "show application" from the CLI of the NCS appliance (now the Prime Infrastructure appliance) I see this:
HQ-NCS1/admin# show application
NCS Cisco Prime Network Control System
Is that normal? Maybe this is my problem. Should this output list "Cisco Prime Infrastructure" instead of (or in addtion to) Cisco Prime Network Control System? When I login to the GUI it shows "Cisco Prime Infrastructure" and the GUI has changed considerably (menus are different) so I'm assuming that the application upgrades I launched from the CLI to go to Prime Infrastructure worked fine.

Cisco Prime Infrastructure Scheduled Configuration Archive not executing

We have a deployment of Cisco Prime Infrastrcuture 1.3 (1.3.0.20).
Configuration Archive is a feature that collects and archives the device configurations i.e. cisco switches.
You have an option to schedule this to run, say daily, weekly etc. Once scheduled you can see it in the "Jobs Dashboard" and with the "next start time" of what you configured. I have a situation whereby the time it is suppose to start - it doesnt - howevere flags the job as a "success". Not newe device configurations are archived and the "next start time" remain the same. Its almost like it is failing to execute, but some other process under the hood thinks that it was been executed correctly?
Any ideas or experience that could help here would be appreciated!

Some extra info that has just come to my attention. At one point we were running (we're actually still running) CiscoWorks with LMS3.2 and Cisco NCS 1.x. I merged these two things together into Cisco Prime Infrastructure (upgraded the licensing to get 450 lifecycle licenses to cover the APs + all of the devices coming from LMS3.2). I followed all of the documented procedures to upgrade the NCS appliance to Prime Infrastructure. But when I type "show application" from the CLI of the NCS appliance (now the Prime Infrastructure appliance) I see this:
HQ-NCS1/admin# show application
NCS Cisco Prime Network Control System
Is that normal? Maybe this is my problem. Should this output list "Cisco Prime Infrastructure" instead of (or in addtion to) Cisco Prime Network Control System? When I login to the GUI it shows "Cisco Prime Infrastructure" and the GUI has changed considerably (menus are different) so I'm assuming that the application upgrades I launched from the CLI to go to Prime Infrastructure worked fine.

How to merge two Apple accounts by migration

Hello to you all
My question relates about merging two apple accounts.
Having two accounts is an issue (for instance when you start setting up Family sharing, or trying to get phone calls on your Mac)
As we know, merging two accounts is alas (still ?) not possible.
But it should be possible to address the issue it my migrating data.
As many people, I have two accounts:
Account A: [email protected], with all my purchases (iTunes, apps, machines)
Account B: [email protected], with my calendar, contacts, bookmarks, photos...
The best possible option seems to keep account A:
- Transfer the data from B to A
- Possibly transferring the [email protected] address into A
- Close B
About the data transfer:
- Transferring iCloud documents is easy (using the Finder)
- Transferring contacts, events bookmarks is also easy as they can be exported (ex .VCF or html)
- Transferring Notes can be done by moving the notes from the iCloud list to the On my Mac List
- Transferring Passwords and Photostreams is difficult (No Export solution for KeyChains, No way to transfer ownership of a photo stream)
- I do not know yet about transferring the iCloud email address [email protected] into the [email protected]
So my questions are:
1) Do you have any idea about transferring Passwords in KeyChain from one iCloud account to another ?
2) Do you have any idea about transferring ownership of a photo stream to one iCloud account to another ?
3) Do you have any idea about the email address transfer
4) Do you have any other way to do this ?
Thanks for your attention
Kind regards

The easiest thing to do would be to use an iOS device, such as your iPhone to migrate the data from one account to the other. You can go to Settings>iCloud on your phone, sign out of account B, choose Keep on My iPhone and provide your password when prompted, then sign back in using ID A to create a new iCloud account and choose Merge when prompted to upload the data. This will not migrate notes, which as you said, can be dragged and dropped between accounts on your Mac.
This will also not move your existing iCloud email account. You cannot move an iCloud email account to a new iCloud account. You would either have to switch to the new @icloud.com email account that goes with your new iCloud account, or continue to use the existing email account as a "secondary account" To do this, you would go to Settings>Mail,Contacts,Calendars>Add Account>iCloud on your iOS devices (and System Preferences>Internet Accounts>iCloud on your Mac), sign back into account B and turn on Mail. Just be aware that, at least on an iOS device, this would not be push email as push is only supported in the primary iCloud account.
Photo stream cannot be moved between accounts either, not can it be enabled in a secondary account. If you want to keep your photo stream photos you'll have to either save them to your device, or add them to a shared album before signing out of the existing account (see http://help.apple.com/icloud/#/mmc0cd7e99). Another option would be to import them to your iPhoto events, then add them back to your new photo stream using iPhoto when you sign into the new iCloud account on your Mac.
For iCloud keychain, I believe you can turn it off iCloud keychain and you will be given an option to keep a copy of any saved passwords and credit card information on your device. Then set up iCloud keychain again once you are signed into your new iCloud account.

Error in Prime Infrastructure 2.0 after Controller upgrade

Hello
I've got two WiSM and Prime Infrastructure 2.0. Last week I upgraded one WiSM to 7.0.250.0, plus a third controller. That worked fine, but since then, my PI shows one of the two controllers of the second WiSM as "Unreachable". I rebooted the PI and also rebooted the controller again, to no avail.
I tried now to update the snmp v2c credentials in PI, but receive an error.
The error message shown when I try to update the credentials is:
Error: Common-1: Some unexpected internal error has occurred. If the problem persists please report to the Tech Support.
Error:Detail: errorId=6 Invalid credential name: snmp_transport.
Any ideas?
I can normally access the controller through its webinterface and don't see any errors that would spring to the eye.
[edit]
Just manualy run the Task "Controller Operational Status" and received this error:
com.cisco.wnbu.server.common.errors.InternalException: COMMON-1
Thanks
Patrick

I worked with TAC Team and the final solution was to delete all controllers and add them again. This might get fixed in a future version though.

Problem in merging two files using BPM

Hello Frens,
I am doing a scenario for merging of two files N:1 using BPMu2026
I have to merge two files into one file. The two input files are as below :
File1 : Id, Name, Age, Place
File2 : ID, Street, Adrress
And output File is : ID, Name, Age,place, street, Address
For this scenario I have defined three datatypes , message types and the message interfaces as below :
For File1: Mi_file1_ob, Mi_file1_abs
For File2: Mi_file2_ob, Mi_file2_abs
For output : mi_output_ib, mi_ouput_abs
In interface mapping I have selected two source interface and one targetu2026
For Integration process I have selected two receives as two branches of fork and transformation to collect them and a send..
In IR part I have defined three communication channels sender1, sender2 and a receiver . I have imported the integration from IP and rest is sameu2026
I am facing a problem for getting the outputu2026
When I checked in sxmb_moni everything is fine and sxi_cache and the return code is also 0 but I am not getting the outputu2026
Can anyone help me in finding out the problem..
Thanks in advance...

Hi,
Have a look into these blogs and links
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
http://help.sap.com/saphelp_nw04/helpdata/en/de/766840bf0cbf49e10000000a1550b0/content.htm
you can design the ccBPM. To know more about Correlation -with e.g
http://help.sap.com/saphelp_nw2004s/helpdata/en/0e/56373f7853494fe10000000a114084/content.htm
/people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi
Re: Correlation
http://help.sap.com/saphelp_nw04/helpdata/en/a5/64373f7853494fe10000000a114084/content.htm
i hope this will help you.
Regards
Aashish Sinha
PS : reward points if helpful

Prime Infrastructure and WLC 2504 N+1 config syncronization

I've setup 2 cisco 2504 WLC's in a N+1 configuration, before we purchased Prime Infrastructure. Now I'm trying to syncronize the configurations between the two devices in PI. I've setup a configuration group, and it seems using templates will keep the configuration syncronized between the two devices. Is it possible for PI to automatically create the templates based on the current configuration of the device. Plus with PI 2.1 it seems like I have to create a template for every section of the configuration, shouldn't there be just one large template that has all the configurations.

Yes, you should be able to discover templates from the WLC
HTH,
Steve

How to merge two xmls.

Hi All,
I want to merge two xmls in my output. My scenario is I am getting two sets of outputs and I want to merge them to get my final output. I my output I have a header and a Lineitem. I my final output I want to keep header only once and all the LineItems one by one.Can anyone suggest something.
First outout:-
<outputVariable>
-<part name="payload" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
-<SiebelOrderQueryByExample_Output xmlns="http://siebel.com/asi/">
-<ns:SiebelOrderQueryByExample_Output xmlns:ns="http://siebel.com/asi/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
-<ListOfOrderInterface xmlns="http://www.siebel.com/xml/Siebel%20Order">
<Orders>
<Id>1-15IXJ</Id>
<OrderNumber>1012-1234</OrderNumber>
<ListOfLineItems>
<LineItems>
<Id>1-15IY3</Id>
<OrderNumber>1012-1234</OrderNumber>
<LineNumber>301</LineNumber>
</LineItems>
</ListOfLineItems>
</Orders>
</ListOfOrderInterface>
Second output:-
<outputVariable>
-<part name="payload" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
-<SiebelOrderQueryByExample_Output xmlns="http://siebel.com/asi/">
-<ns:SiebelOrderQueryByExample_Output xmlns:ns="http://siebel.com/asi/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
-<ListOfOrderInterface xmlns="http://www.siebel.com/xml/Siebel%20Order">
-<Orders>
<Id>1-15IXJ</Id>
<OrderNumber>1012-1234</OrderNumber>
<ListOfLineItems>
<LineItems>
<Id>1-15IW2</Id>
<OrderNumber>1012-1234</OrderNumber>
<LineNumber>302</LineNumber>
</LineItems>
</ListOfLineItems>
</Orders>
</ListOfOrderInterface>
The required output which I want after merging.
<outputVariable>
-<part name="payload" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
-<SiebelOrderQueryByExample_Output xmlns="http://siebel.com/asi/">
-<ns:SiebelOrderQueryByExample_Output xmlns:ns="http://siebel.com/asi/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
-<ListOfOrderInterface xmlns="http://www.siebel.com/xml/Siebel%20Order">
-<Orders>
<Id>1-15IXJ</Id>
<OrderNumber>1012-1234</OrderNumber>
<ListOfLineItems>
<LineItems>
<Id>1-15IW2</Id>
<OrderNumber>1012-1234</OrderNumber>
<LineNumber>302</LineNumber>
</LineItems>
<LineItems>
<Id>1-15IY3</Id>
<OrderNumber>1012-1234</OrderNumber>
<LineNumber>301</LineNumber>
</LineItems>
</ListOfLineItems>
</Orders>
</ListOfOrderInterface>
Thanks

I am not using file adapter. I am taking inputs from the BPEL client and displaying output to the client. My input xsd is:-
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns="http://www.example.org/ns/intorder"
targetNamespace="http://www.example.org/ns/intorder"
elementFormDefault="qualified">
<xsd:element name="order" type="orderType">
<xsd:annotation>
<xsd:documentation>
A sample element
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:complexType name="orderType">
<xsd:sequence>
<xsd:element name="Order_Number" type="xsd:string"/>
<xsd:element name="Line_item" type="LineType" maxOccurs="unbounded" minOccurs="0"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="LineType">
<xsd:sequence>
<xsd:element name="Line_Number" type="xsd:string" />
</xsd:sequence>
</xsd:complexType>
</xsd:schema>

Prime Infrastructure 2.0 and Nexus 5548, SSH credentials fail

Hi,
I'm having problem getting the Prime Infrastructure 2.0 to login with SSH to a Nexus 5548 to do an inventory. I get "Wrong Telnet/SSH credentials". But when I use the same credentials from another SSH-client it works fine. I also tested to SSH from the console of the Prime-server and that also works fine.
Any ideas???
Regards,
Stefan Lindkvist

I have PI 2.0 working against Nexus 5k's in two different installations. See below for an example (click to enlarge).
Have you put in an entry in both the login and enable fields (even though they are not separately required when logging in directly)?

Prime Infrastructure 2.1 - Fan-Failure SNMP-Trap Issue

Hello,
I am facing the following Prime Infrastructure (v2.1) issue:
- A Fan-Failure SNMP-Trap from a Cisco 3650 switch doesn't appear on Prime, but a Link-Failure from the same switch does.
- The both events appears on Prime with Syslog.
- The command "snmp-server enable traps envmon fan shutdown supply temperature status" is set up.
- The switch is in "Managed" state in PI, I have checked the ACL at the "snmp-server community" command, it is okay.
- I have set up an SNMP-Trace for the switch on PI, but only "SNMP Null was returned for class com.cisco.server.managedobjects.bridge.Fan3KStats attribute fanIndex" arrived. Please find the log below.
07/02/14 12:39:53.211 TRACE [presence-9] [] Adding attributes for object Fan3KStats[151206060_,1012]
07/02/14 12:39:53.211 TRACE [presence-9] [] Index name : fanIndex
07/02/14 12:39:53.211 TRACE [presence-9] [] Index Value : 1012
07/02/14 12:39:53.211 TRACE [presence-9] [] Device MIB table index: .1012
07/02/14 12:39:53.211 TRACE [presence-9] [] MIB table row index: .1012
07/02/14 12:39:53.211 TRACE [presence-9] []     OID for : fanIndex = 1.3.6.1.2.1.47.1.1.1.1.1.1012
07/02/14 12:39:53.211 TRACE [presence-9] []     OID for : fanOperStatus = 1.3.6.1.4.1.9.9.13.1.4.1.3.1012
07/02/14 12:39:53.211 TRACE [presence-9] [] Get fragment
07/02/14 12:39:53.211 TRACE [presence-9] [] Creating PDU: Get
07/02/14 12:39:53.211 TRACE [presence-9] []     VarBind OID=1.3.6.1.2.1.47.1.1.1.1.1.1010
07/02/14 12:39:53.211 TRACE [presence-9] []     VarBind OID=1.3.6.1.4.1.9.9.13.1.4.1.3.1010
07/02/14 12:39:53.211 TRACE [presence-9] []     VarBind OID=1.3.6.1.2.1.47.1.1.1.1.1.1011
07/02/14 12:39:53.211 TRACE [presence-9] []     VarBind OID=1.3.6.1.4.1.9.9.13.1.4.1.3.1011
07/02/14 12:39:53.211 TRACE [presence-9] []     VarBind OID=1.3.6.1.2.1.47.1.1.1.1.1.1012
07/02/14 12:39:53.211 TRACE [presence-9] []     VarBind OID=1.3.6.1.4.1.9.9.13.1.4.1.3.1012
07/02/14 12:39:53.218 TRACE [presence-9] [] Error Status: 0
07/02/14 12:39:53.218 TRACE [presence-9] [] Error index: 0
07/02/14 12:39:53.218 TRACE [presence-9] [] SNMP Null was returned for class com.cisco.server.managedobjects.bridge.Fan3KStats attribute fanIndex
07/02/14 12:39:53.218 TRACE [presence-9] []     Setting attribute: fanOperStatus
07/02/14 12:39:53.218 TRACE [presence-9] []     SnmpInt Value : ?
07/02/14 12:39:53.218 TRACE [presence-9] [] GetMultiAttributes, storing result, class=com.cisco.server.managedobjects.bridge.Fan3KStats, attr=fanOperStatus
07/02/14 12:39:53.218 TRACE [presence-9] [] SNMP Null was returned for class com.cisco.server.managedobjects.bridge.Fan3KStats attribute fanIndex
07/02/14 12:39:53.218 TRACE [presence-9] []     Setting attribute: fanOperStatus
07/02/14 12:39:53.218 TRACE [presence-9] []     SnmpInt Value : ?
07/02/14 12:39:53.218 TRACE [presence-9] [] GetMultiAttributes, storing result, class=com.cisco.server.managedobjects.bridge.Fan3KStats, attr=fanOperStatus
07/02/14 12:39:53.218 TRACE [presence-9] [] SNMP Null was returned for class com.cisco.server.managedobjects.bridge.Fan3KStats attribute fanIndex
07/02/14 12:39:53.218 TRACE [presence-9] []     Setting attribute: fanOperStatus
07/02/14 12:39:53.218 TRACE [presence-9] []     SnmpInt Value : ?
07/02/14 12:39:53.218 TRACE [presence-9] [] GetMultiAttributes, storing result, class=com.cisco.server.managedobjects.bridge.Fan3KStats, attr=fanOperStatus
07/02/14 12:39:53.218 TRACE [presence-9] [] GetMultiAttributes, assembling attributes
07/02/14 12:39:53.218 TRACE [presence-9] []     MIB lookup, OID for: powerSupplyIndex = 1.3.6.1.2.1.47.1.1.1.1.1
07/02/14 12:39:53.218 TRACE [presence-9] []     GetMultiAttributes needs class=com.cisco.server.managedobjects.bridge.PowerSupply3kStats, field=powerSupplyIndex
07/02/14 12:39:53.218 TRACE [presence-9] []     MIB lookup, OID for: powerSupplyOperStatus = 1.3.6.1.4.1.9.9.13.1.5.1.3
07/02/14 12:39:53.218 TRACE [presence-9] []     GetMultiAttributes needs class=com.cisco.server.managedobjects.bridge.PowerSupply3kStats, field=powerSupplyOperStatus
07/02/14 12:39:53.218 TRACE [presence-9] [] GetMultiAttributes invoked
07/02/14 12:39:53.218 TRACE [presence-9] [] GetMultiAttributes building OIDs for next PDU
07/02/14 12:39:53.218 TRACE [presence-9] [] Adding attributes for object PowerSupply3kStats[151206060_,1009]
- The switch sends the SNMP Trap, based on the followings:
Jul 7 13:38:30 UTC: SNMP: Packet sent via UDP to IP_ADDRESS
Jul 7 13:38:30 UTC: %PLATFORM_THERMAL-6-FRU_FAN_OIR: Switch 1: System fan 1 removed
Jul 7 13:38:30 UTC: %PLATFORM_THERMAL-1-FRU_FAN_NOT_PRESENT: Switch 1: System fan 1 not present
Jul 7 13:38:30 UTC: SNMP: Queuing packet to IP_ADDRESS
Jul 7 13:38:30 UTC: SNMP: V2 Trap, reqid 33202, errstat 0, erridx 0
sysUpTime.0 = 576753333
snmpTrapOID.0 = ciscoEnvMonMIBNotifications.8
ciscoEnvMonFanStatusEntry.2.1010 = Switch 1 - FAN 1, NotExist
ciscoEnvMonFanStatusEntry.3.1010 = 5
Jul 7 13:38:30 UTC: SNMP: Queuing packet to IP_ADDRESS
Jul 7 13:38:30 UTC: SNMP: V2 Trap, reqid 33203, errstat 0, erridx 0
sysUpTime.0 = 576753333
snmpTrapOID.0 = ciscoEnvMonMIBNotifications.8
ciscoEnvMonFanStatusEntry.2.1010 = Switch 1 - FAN 1, NotExist
ciscoEnvMonFanStatusEntry.3.1010 = 5
Jul 7 13:38:30 UTC: SNMP: Queuing packet to IP_ADDRESS
Jul 7 13:38:30 UTC: SNMP: V2 Trap, reqid 33204, errstat 0, erridx 0
sysUpTime.0 = 576753333
snmpTrapOID.0 = ciscoEnvMonMIBNotifications.8
ciscoEnvMonFanStatusEntry.2.1010 = Switch 1 - FAN 1, NotExist
ciscoEnvMonFanStatusEntry.3.1010 = 5
Jul 7 13:38:30 UTC: SNMP: Queuing packet to IP_ADDRESS
Jul 7 13:38:30 UTC: SNMP: V2 Trap, reqid 33205, errstat 0, erridx 0
sysUpTime.0 = 576753333
snmpTrapOID.0 = ciscoEnvMonMIBNotifications.8
ciscoEnvMonFanStatusEntry.2.1010 = Switch 1 - FAN 1, NotExist
ciscoEnvMonFanStatusEntry.3.1010 = 5
Jul 7 13:38:31 UTC: SNMP: Packet sent via UDP to IP_ADDRESS
Jul 7 13:38:31 UTC: SNMP: Packet sent via UDP to IP_ADDRESS
Jul 7 13:38:31 UTC: SNMP: Packet sent via UDP to IP_ADDRESS
Jul 7 13:38:31 UTC: SNMP: Packet sent via UDP to IP_ADDRESS
Jul 7 13:38:45 UTC: SNMP: Packet sent via UDP to IP_ADDRESS
Jul 7 13:38:51 UTC: %PLATFORM_THERMAL-6-FRU_FAN_OIR: Switch 1: System fan 1 inserted
Jul 7 13:38:54 UTC: SNMP: Queuing packet to IP_ADDRESS
Jul 7 13:38:54 UTC: SNMP: V2 Trap, reqid 33206, errstat 0, erridx 0
sysUpTime.0 = 576755733
snmpTrapOID.0 = ciscoEnvMonMIBNotifications.8
ciscoEnvMonFanStatusEntry.2.1010 = Switch 1 - FAN 1, Normal
ciscoEnvMonFanStatusEntry.3.1010 = 1
Jul 7 13:38:54 UTC: SNMP: Queuing packet to IP_ADDRESS
Jul 7 13:38:54 UTC: SNMP: V2 Trap, reqid 33207, errstat 0, erridx 0
sysUpTime.0 = 576755733
snmpTrapOID.0 = ciscoEnvMonMIBNotifications.8
ciscoEnvMonFanStatusEntry.2.1010 = Switch 1 - FAN 1, Normal
ciscoEnvMonFanStatusEntry.3.1010 = 1
Jul 7 13:38:54 UTC: SNMP: Queuing packet to IP_ADDRESS
Jul 7 13:38:54 UTC: SNMP: V2 Trap, reqid 33208, errstat 0, erridx 0
sysUpTime.0 = 576755733
snmpTrapOID.0 = ciscoEnvMonMIBNotifications.8
ciscoEnvMonFanStatusEntry.2.1010 = Switch 1 - FAN 1, Normal
ciscoEnvMonFanStatusEntry.3.1010 = 1
Jul 7 13:38:54 UTC: SNMP: Queuing packet to IP_ADDRESS
Jul 7 13:38:54 UTC: SNMP: V2 Trap, reqid 33209, errstat 0, erridx 0
sysUpTime.0 = 576755733
snmpTrapOID.0 = ciscoEnvMonMIBNotifications.8
ciscoEnvMonFanStatusEntry.2.1010 = Switch 1 - FAN 1, Normal
ciscoEnvMonFanStatusEntry.3.1010 = 1
Jul 7 13:38:55 UTC: SNMP: Packet sent via UDP to IP_ADDRESS
Jul 7 13:38:55 UTC: SNMP: Packet sent via UDP to IP_ADDRESS
Jul 7 13:38:55 UTC: SNMP: Packet sent via UDP to IP_ADDRESS
Jul 7 13:38:55 UTC: SNMP: Packet sent via UDP to IP_ADDRESS
It seems like PI and the switch doesn't understand each other concerning the fan...
Thanks for any ideas, comments and feedbacks,
Csaba

I have the very same problem.
The switch has a power supply error (one of the two is down). There is the syslog message in PI about it, but no event has created, so nor alarm is there as well.
When I check the status of the switch in the Device Work Center, and choose the Environment in Device Details I can see that PI has not realized the power supply error.
However when I click on the Sync for this very device the power supply status is updated, but still no event or alarm.
This is the case with the FANs as well.

Cisco Prime Infrastructure patch 2.1.1 - HA issue

Hello,
I have a problem with the Cisco Prime Infrastructure patched to version 2.1.1. I did exactly what Installation Guidelines say:
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-1-1/release/notes/cpi_rn.html
– Install the Prime Infrastructure 2.1.1 patch by using the Administration > Software Updates page on the primary server.
– Restart the primary server.
– Verify that the patch installation is complete. If you find the installation complete, decommission and reinstall the secondary server and add it back to the primary server.
I reinstalled HA server and I'm trying to add it to HA but I get "Failed to authenticate - Primary(xx.xx.xx.xx) and Secondary(xx.xx.xx.xy) PI version does not match"
Can you help me with that? What I'm doing wrong? or maybe this patch is not prepared to work in HA mode?
Regards

Symptom:
The installation instructions of PI 2.1.1 patch in a High Availability environment are not accurate and following these steps will result in the inability to re-pair the Primary and Secondary servers.
Conditions:
If the instructions are followed, then when the user attempts to re-pair the servers, an error will be encountered:
"High Availability Registration Failed - Failed to authenticate - Primary (x.x.x.1) and Secondary (x.x.x.2) PI version does not match".
Instead, the following steps have proved to work correctly:
1. Upload and install patch on primary.
2. Upload and install patch on secondary.
3. Stop NCS services on secondary
4. Stop NCS services on primary
5. Start services on secondary
6. Start services on primary
7. Re-pair HA servers from primary
Workaround:
Workaround 1:
On the secondary, go under root and issue:
# cd /opt/CSCOlumos/bin/
# ./hamode.sh primary
Answer 'yes' when prompted.
Go to admin user and execute
# ncs stop
After the services are stopped:
# ncs start
When the services are back up, login to the secondary GUI as you would login to a primary server
Go under Administration > Software update, upload the patch and install it.
Go to admin user and execute
# ncs stop
After the services are stopped:
# ncs start
When the services are up, go under root and issue:
# cd /opt/CSCOlumos/bin/
# ./hamode.sh secondary
Answer 'yes' when prompted.
Go to admin user and execute
# ncs stop
After the services are stopped:
# ncs start
After the message that services started successfully on the secondary, initiate a new High Availability configuration from the primary. Now the synchronization between the two servers should succeed.
Workaround 2:
Redeploy or reinstall the Primary server, restore the backup which was taken prior to applying the patch, reconfigure the High Availability and continue with the steps described in the Conditions section.
Further Problem Description:
Release Notes have been updated with more precise instructions.
Known Affected Releases:
(1)
2.1(0.0.85)

Using Windows Network Policy Server to authenticate Prime Infrastructure 1.4 admin access

I am using Prime Infrastructure 1.4 and I am needing to set up RADIUS Authencation. I am using Microsoft Network Policy Server. I have done all of the setup on both systems. I have matched up the settings the best I can on both systems. I am trying to use CHAP. I keep getting username or passwrod is not valid. In a effort to test I changed the Authentication type to PAP (I do not want to use this because it is not encrypted) But in a effort of testing I changed the setting on both the NPS and on Prime. I am now able to log in. Changing back to CHAP it fails and states the Username or Password is invalid. SO, PLEASE HELP!!!!

Ok, I was able to resolve this over the weekend. The actual fix is a little complicated. You can find the full explination here: http://technologyordie.com/windows-nps-radius-authentication-of-cisco-prime-infrastructure
The basics are that Prime (1.3 is the version I am using at this point) expects two AV pairs from radius. They are as as follows:
NCS:role0=Admin
NCS:virtual-domain0=ROOT-DOMAIN
"Admin" is the name of the group you would like your users to have access at and "ROOT-DOMAIN" is the name of the domain you would like them to have access to.
For TACACS+ I suspect the AV Pairs are going to be the same but I have not been able to test that.

Merging two Prime Infrastructure instances

Similar Messages

Maybe you are looking for