Merging video and keynote presentations

Is it possible in iMovie to combine a video of a person giving a presentation with a keynote presentation in order to creat the effect that we see at the keynote speeches. If not, does anyone know of any mac software that can do that?
Thanks,
Ged

When using a voice over using the record slide show facility, the timing of every slide is set when advancing to the next slide.
To enable manual timings on one slide, you will need to place individual sound files on each slide, created in a sound editing application such as QuickTime.

Similar Messages

Is it possible to embed video in keynote presentation when exporting to .pdf?

Is it possible to embed video in keynote presentation when exporting to .pdf?

You can place the video in Keynote but it will be exported as a still.Adobe Acrobat Pro is needed to embed video in a PDF page.

Onboard video and Keynote

The most aggressive thing I want to do from a video processor standpoint is to have video files embedded into Keynote presentations. Has anyone had any trouble with the on board video not being able to drive the movies? Nothing else would be running at the same time as the Keynote presentation, but I cannot have stuttering of the video.
Thanks

You're probably going to have to be a little more specific about the types of videos you're going to include before anyone can make a recommendation. Full-screen HD movie trailers from the Apple Web site? .AVI files you recorded with your digital still camera? Those two types of video files will behave differently whether they're imbedded into Keynote or not.
-Doug

4.2, AirPlay and Keynote presentation

I wonder if we'll be able to send a Keynote presentation from my iPad to an AppleTV over AirPlay?

At present, keynote doesn't support AirPlay, but there is no reason it shouldn't. Apple, are you listening?
This would be a tremendously valuable tool for my business.

Since I put Mountain Lion on my MacAir my PowerPoint and Keynote Presentations freeze up when I am presenting. This is so unacceptable when I have 75 - 500 people I am presenting in front of. I can no longer use my presenter tool either. Is there help

Since I put Mountain Lion on my MacAir, my Power Point presentations freeze up when hooked to an LCD projector. I can no longer use my presenter clicker tool that moves my slides as I walk among my audiences. This is totally unacceptable in the kind of work that I do. The Genius Bar person told me to try Keynote but that is even worse. I wanted to go back to Snow Leopard but because I have backed up my information on an external hard drive she said I cannot go back to Snow Leopard. Does anyone know of a solution to this problem? I have several presentations coming up in the next six weeks.

You need to move to Windows 7, because Apple is now releasing a new OS X version annually and it's playing havoc with people's hardware and software.
Windows 7 will get support until 2020, that's 8 years of software stability, however you do need to make System Restore disks, boot disk and another on a hard drive to self restore (like TimeMachine is for OS X)
Apple has no plans to change their currrent behavior as all they care about is selling new hardware with a shiny new OS X verison on it.
If you wait to move, what will happen is you'll lose that full 8 years and will have to swtich to a newer Windows sooner
Windows 7 machines are still widely avaialble, despite Windows 8 (a failure) being pushed currently.
Running three OS X operating systems on one machine is quite a chore reserved for only seasoned computer geeks, then it's only going to last X months as the next OS X version will be released, then the next a year after that.
Another method would be to get a virtual machine software (virtualbox is free) and install Windows 7 into that to ease your transitition if you cant' spring for a Windows 7 machine, preferablly a tower that will last a long time.
Here is a method to run Snow Leopard in Parallels, however it's a unapproced hack and not for the comptuer newbie.
http://forums.macrumors.com/showthread.php?t=1365439
We have no control over Apple's OS X release cycle, nor the third party developers who make their own decisions what to support.
Our only choice as users to stop using both products and seek software/hardware stability.

Syncing/Merging Video and Audio, Getting rid of production audio

I'm driving myself crazy over here thinking there must be a simple solution I am overlooking. I have clips with production audio that came from the camera. I also have separate audio wav files that came from the dat tape. I want to sync the video with the wav sound, lose the bad camera audio and create a new clip that references back to the original material. Is this possible? So far, all I have been able to do is create a merged clip with all of the audio files (from camera and dat). Thanks for any help.

I think I finally figured it out. (Yes, I am very determined) A few steps, but worth it if everything
links back to original material and makes editing easier...
So, what I figured out is:
1. Put take with video in the viewer and select an in mark. (I used sticks) Cut video only into the timeline.
2. Put audio wav file in viewer, select the in and cut audio into timeline.
3. Check sync.
4. Select both the audio and video in the timeline.
5. Command L to link the audio and video together (important step I
missed earlier in my travails)
6. Now select and drag the audio and video from the timeline directly into a bin.
This creates the clip I have been tearing my hair out about....with only the audio that I want, no extra tracks.
Thanks to Jerry for his help and suggestions.
Jill
Message was edited by: jillymd

QT 7.1.5: How to merge Video and Audio tracks?

I have a movie without a sound track and a mp3-file which I want to merge. I know that both should have the same length.
First I opened the audio file, selected all, copied it - then opened the video file, selected all and pasted it. Sounds good and functioned properly.
Trying to start the movie on another Macintosh, QT asks for the mp3-file. What went wrong, what to do?
Greetings from the middle of Germany
Herbert

You failed to save the new file as "self-contained".
You should use Save As and check the box for self-contained.

LCD Projector and Keynote Presentation - Do I need an adapter??

Hi there -
I am presenting at a couple of conferences this week and have no idea which LCD projector they use at both places. However, I was told I should make sure I had an adapter. Anyone know what type they are speaking of? Where can I get them?
Hopefully this isn't too dumb of a question!

Ha! I feel dense! I was wondering what that was. The cord is so short that I figured it could be that, but now that I think about it, it doesn't need to be long because it uses the LCD cord as well...duh..thanks!

Creating podcasts and videos using keynote and ???

Hello all,
I am looking for software solutions.
I am preparing to turn some of my lectures into podcasts and quicktime videos. I hope to make it so that each slide has its own audio track so that as the lecture changes over time, so too can just that small bit of audio. For this reason (and the fact that the audio is then built into the lecture) I dont really want to record directly with Keynote.
I have briefly messed around with Garageband to see if this is the best solution, but when I export the Keynote to GB, it wont let me manage the slide time individually. I suppose I could create an image out of each slide and drop that into GB, but that seems rather convoluted.
What have you all been using to create easily modifiable podcasts and quicktime videos from Keynote presentations?
Thanks in advance.

tschoenb wrote:
I am looking for software solutions.
Welcome to the discussions. I don't know whether the following suggestions will do what you want, but they may be worth looking in to...
ProfCast provides synchronization of slides with audio and Keynote support.
ScreenFlow can capture your soundless Keynote video as it plays and then allow adding of audio files via drag & drop.
_Podcast Maker_ may also be of interest.

Using keynote presentation on projector have had brief loss of signal

I have changed projector and iPad and still experience during keynote presentation a brief loss of signal to projector.
This happens at random and keynote presentation restarts on projector. Tried every source to help and followed all advice and it still
happens at random. Can play a movie using same gear no problem at all; Please Help.

Please do not type in all caps, that is considered shouting on a public forum and also rude which I am sure is not your intent. I would also suggest reposting in the Keynot forum, that is where the Keynote gurus are likely to be.
Good luck.

How can I download a You Tube video and place in a Keynote presentation. We have the permission of the videographer and have downloaded Get Tube. Thank you.

How can I download a You Tube video and place in a Keynote presentation. We have the permission of the videographer and have downloaded Get Tube at his (videographer) suggestion. Thank you.

Did you check the home page setting?
*Firefox > Preferences > General > Startup: Home page
*https://support.mozilla.org/kb/How+to+set+the+home+page
If you do not keep changes after a restart then see:
*http://kb.mozillazine.org/Preferences_not_saved
You can also check for problems with the sessionstore.js and sessionstore.bak files in the Firefox Profile Folder that store session data.
Delete the sessionstore.js file and possible sessionstore-##.js files with a number and sessionstore.bak in the Firefox Profile Folder.
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder
*http://kb.mozillazine.org/Profile_folder_-_Firefox
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
*http://kb.mozillazine.org/Multiple_profile_files_created

Moving Keynote Presentation to a Video Podcast

I have a Keynote presentation that I would like to record with narration, manually advance slides in sync with the narration, then move the combined narrated Keynote to a video podcast where viewer can see the slides and hear the narration.
Have tried moving it to GarageBand but it seems to throw up on the audio, won't take it in either the 'copy audio' or 'mix audio' options.
iMovie seems a logical choice but text on the slides (which look great in Keynote) all look out of focus in iMovie, either the new one or iMovieHD. Some fonts help this situation but none look anywhere as clear as the original Keynote. Went to One on Ones and no help there.
This does not seem like an off the wall application of Keynote to me but a logical extension for 'distance learning'. Has anyone done this successfully with text /photo slides with narration? how about slides with video clips as well?

We use Dropbox to do this effortlessly to mobile devices. It is free for users requiring less than 2GB of data:
Dropbox for Mobile Devices

Is it possible to embedding a video in Keynote and then play as a PDF?

Hi
Is it possible to embedding a video in Keynote and then play as a PDF? I want to do a PowerPoint/Keynote presentation that includes videos from YouTube. My preference is use Keynote although I do have Office 2004.
My issue is that the places where we present have their own equipment so we are encouraged to bring the presentation on a USB/portable HD, and they tend to be Windows environments.
In my perfect (ignorant) world, I'd
Create it in Keynote
Add/embed videos from YouTube
Save it as a multi platform file like a PDF
I guess the key issue is:
Is there a way to create a multi platform presentation with videos (I think Keynote and PPT require different video formats???) that can be carried on USB/portable HD?
Thanks

No, it's not possible without using hacks. And Adobe can't support or endorse hacks
Bear in mind that not only there are new features in a new version which can't possibly be recreated by an older version - also, there are enhancements to existing features, which would make them render differently in the two versions.
That said, there are people posting such hacks, as Sébastien pointed out.

Adding video to a Keynote presentation on iPad

Since the IOS 8 update I have not been able to find my videos to add to a presentation. Before the update all videos were in the 'media' section of Keynote app but now it just shows 'Photos'. The 'Video' file is synced in the same file as all the photos but all videos now go directly into the separate Video app under the 'Movies' category that can not be found by the Keynote app.
I am able to copy and paste any videos I have used on previous presentations but not all videos I want to use are available on past presentations but this is a workaround if a video has been used before.
Anyone that is kind enough to offer advise please bare in mind that this was not an issue before the update (just trying to save anyone taking the time to explain how it used to work before the update )
Many thanks in advance for any help

I've been following this discussion and have 2 questions and a suggestion.
Question 1: I have not found any way to select a music or sound file of any kind when putting together a Keynote presention on my iPad. Inserting a media object seens ti only allow videos and still images. I don't have a Mac so going that route won't work for me.
Suggestion: I have, however, found a way to insert audio clips. On my Windows machine I create a movie with the soundtrack of the audio clip that I want, and then load a still image into the video track, to play the same amount of time as the audio track. Save it as an MP4 movie file and transfer that (via a WiFi app) to the iPad. I can then select that "video" to play on a Keynote slide. This leads me to....
Question 2: Is there any way to have multipe videos on a single slide that you can play one at a time, in any order. it wseems when I try this, that when touch a playing video to stop it, another of the other videos stop, etc. Any way to pause a video an stay on the same slide?

No Sound in Keynote Presentation (QT video)

Hi All,
I am working on a Keynote presentation and am trying to import a Video file (QT) into the final slide. (Video created via iTunes using music that was bought from the iTunes store) The video works fine however there is no audio.
Any advice would be appreciated.
~ Dave
10.4.11
Iwork 08

Assume you mean the movie made in iMovie?
Could be a DRM thing. Try converting the AAC file to MP3 and use that one in the movie.

Merging video and keynote presentations

Similar Messages

Maybe you are looking for