Merging Workset Maps?

Hi,
I tried to merge two workset map iviews from two different roles but I am getting the below error message
"Could not find workset location. Check the 'Relative Workset Location' parameter of this iView."
Can you help me fix this?
Thanks
Raj Balakrishnan

Selvaraj -
First, I think that merging is only available on the role, workset, or folders. The last time I checked, page and iView merging were not supported.
I don't believe that you can merge the workset maps as you desire. The workset map works by visually displaying icons for individual pages etc. that are contained in the workset. The parameter 'Relative Workset Location' describes where to find the workset. When merging two workset maps, I'm guessing that the iView does not know where the workset is for display.
Regards,
Kyle

Similar Messages

What is difference between Service map iview and Workset Map iview

Hi Experts,
Can anyone tell me the difference between service map iView and Workset Map iView.
When I am creating these iViews, its seams both are same. I canu2019t find difference still, can anyone help me out of this
Thanks in Advance
Janardhan

Hi,
Service Map Iview:The Service Map iView is an ERP-specific variant of the portal Workset Map iView. It serves as a central point of entry and guided access to the services of SAP service modules such as the Manager Self Service (MSS) module, or the Employee Self Service (ESS) module.
Workset Map iview:A Workset Map is the equivalent of a site map, providing users with explicit information on the functionality that is available in a given workset. It is based on an iView, and serves as a central point of entry and guided access to the contents of a workset.
if you want to more info pls go thr the below thread
Workset Map iView
i hope it will help you
Thanks,
Sreeni.

Service map and workset map iview

Can any one please provide me with a good documentation for creating Service map and workset maps in SPA portal.

Hi Raj,
Before posting for documentation help, just browse through help.sap.com, you could find really valuable help there.
For your reference some of the useful links are as below -
[Navigation using Workset Map iView|http://help.sap.com/saphelp_nw70/helpdata/en/ae/ed9576d3e94ec9b440dfe3a8db9cbf/content.htm]
[Creating Workset Map iView|http://help.sap.com/saphelp_nw70/helpdata/en/84/f8c4400c2d712ae10000000a155106/content.htm]
[Navigation using Service Map iView|http://help.sap.com/saphelp_nw70/helpdata/en/a1/c64960cb1e4c4293ce6d8eaed02ff5/content.htm]
[Creating Service Map iView|http://help.sap.com/saphelp_nw70/helpdata/en/5b/bc12311911458993849a91f3f20dec/content.htm]
Hope these help you out
Regards,
Shailesh

How to add Custom Image for the Workset Map Pictogram property

Hello Everybody,
Can anyone suggest where should i put a custom image so that i can select it in the Workset Map Pictogram Property of an Iview. I have already uploaded a gif image in root->etc->public->mimes->images->pictograms in KM but still i am not able to see the uploaded image in Iview property. Looking forward for a quick solution.
Thanks in advance,
Regards,
Sarabjeet Singh.

Hello Nicolas,
just stumbled accross the topic. Well, if the portal service is
".../j2ee/cluster/server0/apps/sap. com/irj/servlet_jsp/irj/root/portalapps/com.sap.portal.navigation.mimeservice" as discussed above.
I have found the .gifs inside this par file of my NW7.0 Portal:
\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\pcd\com.sap.portal.navigation.mimeservice.par.bak
Hope this is still interesting for someone.
Regs
Ulf

Need something similar to the Workset Map iView

Hello,
I'm looking for something that is very similar to the workset map iview and was hoping someone could help me out. The problem for me using the workset map iview is that it only pertains to one role. I basically need an entry point that can point to several different items from different roles based upon the roles a current user has. I guess you could say much like a site map but we want it to look like the workset map iview.
Any help would be greatly appreciated.
Thanks,
-Tamara

Hello Shibendra,
What u can do is create KM Navigation Iview and assign that Iview to Workset and that workset to role.
now place that newely created workset next to the intended one and then see the preview of Worset Map iview .
in that u will see the intended Iview and next to it the Km navigation Iview that u have created and after clicking on that iview u will be navigated to the required position in KM
Hope this works
If so please reward ponts.
Regards.
Soni Vinit

Workset map ivew

Hi All,
What is workset map ivew?
What is the process?
Thanks,
Jyothi

Hi Jyothi,
Workset Map iView is an iView in SAP Portal, which is used to show the content of a workset in a given role. for example
for eg:if you have role structure as below :
Role1
--Workset1
Page1
Workset Map iView1
Workset2
report1
report2
report3
report4
report5
report6
report7
so in this case if you map the workset2 to your worksetmap iView1.When the end user click on the page containg the page then,reports will be shown as a link in the Worksetmapiview1.
Main property to be taken care in workset iview is Relative Workset Location property.Here you can use the two values levels up and pathlist
Pathlist={workset2 id}
Moreover whatever the description you have given in for the reports and the worksetmap pictogram in the report will be visible along with the each report link.
I am just using this senario to explain the opertaions,you can you workset map iView as per your needs.Even you can use it to main workset too.
Hope this helps
Naga

Automatic merging of map files in RoboHelp?

[Hope this isn't a double post; my first attempt ended in
network error and forum doesn't seem to have that post]
My group is charged with developing a help system using
RoboHelp 7. Output type will be WebHelp. The interface between
context-sensitive Help system and the target application will be a
single project's output and a single map file. The plan for help
development is to divide the work up into multiple layers of
projects. The final output will be the result of multiple project
merges from the bottom layer up.
RH7 enables this methodology with the WebHelp merge
module...except that it doesn't automatically merge sub projects'
map ID files (individual BSSCDefaults.h) into the master project's
map ID file BSSCDefaults.h. I can use a different name for the sub
projects' map files and import them into the master project, but
this still does not result in the master's map file being modified.
The map IDs remain dispersed across the multiple map files within
the master project.
Is there a way to get an automatic concatenation of map ID
files?

Thanks for the suggestion. I was hoping that the answer would
be other than that it's a manual procedure outside of RH7, but
that's the conclusion given my previous [admittedly brief]
searching within this site and thinking more about the RH paradigm
(as explained in the Grainge article as well as the other Adobe
articles).
For now, I'm going to have the team use the following process
while we're shaking out our development methodology:
- each author follows the established naming convention for
Topic IDs and use his/her assigned map number range when creating
map IDs which should guarantee that the IDs are unique across all
projects
- each author will export his/her projects' map file (for
java applications) to a subfolder within their project
- rename the resultant BSSCDefaults.properties file to a
globally unique filename
- copy that project-unique properties file to the specified
folder
- one person/admin will concatenate the individual properties
files into a single file to be used by the application developers
Comments?
ayf

BPM: Messager Merge - Transformation Mapping Problem

Hi,
I tried an eg for time bound message merging (rather adding the items in the message).
I am using a single datatype/message type.
I was able to do the message mapping/interface mapping test by changing the source by making it 0 to unbounded and on the target I have same message type.
This test was successful.I went ahead with the creating the scenario .I used a file adapter for picking up a file. The message monitor shows it is picked it and sent to the bpm.
but the bpm part failed I checked in bpe monitor.It just says the mapping failed(transformation step).prior to which there is a receive step and container operation step which I used it for append the message .these are under a block and this block has a infinite loop for collecting the messages.There is a exception thrower(control step) which is for 2 minutes.this handled by a exception handler.and I guess my file was collected and send to the transformation step after this.but the thing is it never seems to appended since the two files are shown as two seperate error messages in transformation rather than as single ...
Can somebody tell what could be the problem/where to look for the file.
THnks

I am getting more and more sure that the problem is at the block entry only...becoz i checked with direct entry to loop with a counter as loop breaker.it entered the loop and added the lines to the message with multiple lines.and once it hit the counter it came out and did the transformation successfully and sent it to the target system.
when i add the block it fail right at the block entry for the first message after that all the messages show the green flag clicking on pe would show an empty queue...
I guess the only step happening before the block is the correlation key creation i amn't sure if this is giving some problems..
NOW FOR THE BPM Steps....
1.I created the correlation key.
2.I put the block for the block i added the correlation key and exception name.
3.I put the exception branch and the deadline branch
4.on the exception branch i put the name of the exception to be handled.
5. on the deadline branch i put a 2 minute duration
6.within the deadline branch i put the control which throws the exception...
7.i added a loop to the block which is 1 = 1.in that there is a recieve step
8.after that there is container operation which adds the message to the list...
9.followed by outside the block i have a transformation and send steps..
10.the block is in default mode.
I tried creating the scenario completely again and again with different datatype etc to avoid the cache problem + workflow item locked problem...
but no luckk
THNks

PS CS Technique Merge 2 Maps

I have 2 or more World Maps (tiff images) whose backgrounds are essentially the same as I add more maps to the pile.
Each map shows who's visited my artsite, and I'd like to merge the collection of maps to show all visitors. They change from month to month, as my map marker only saves the most recent 100 visitors.
I've tried various things with varying success ... for recent example, link to my artsite and look down on the main page for Recent Visitor Map.
Anyone have a technique that works well? nails it?
Need to line up the maps, some being bigger than others, depending on how I saved them, cut and crop. In the future, this could be standardized.
Hints welcomed.

A quick search using the terms
free website visitor maps
found this:
http://www.niftymaps.com/
From the FAQ:
Are there any custom map designs?
Those that have more than 20,000 friends or 100,000 markers on their map will be able to have a special custom map designed. Just let us know and we will get right to work. You will not have to worry about losing any of your current markets either because they will all be transferred to the custom design.

How to merge two maps in a single map

i have two maps existing. i want to merge both the maps into a single map through coding. do we have any function which can solve this problem. If not then please provide me some suggestions to solve this problem.
thanks,
amit

Amit,
I did this once using the HashMapUtils found in the apache myfaces code...
package se.inserve.util;
import java.util.HashMap;
import java.util.Map;
import java.util.Set;
import java.util.Iterator;
public class HashMapUtils
 //~ Constructors -------------------------------------------------------------------------------
 protected HashMapUtils()
 // block public access
 //~ Methods ------------------------------------------------------------------------------------
 * Calculates initial capacity needed to hold <code>size</code> elements in
 * a HashMap or Hashtable without forcing an expensive increase in internal
 * capacity. Capacity is based on the default load factor of .75.
 * 
 * Usage: <code>Map map = new HashMap(HashMapUtils.calcCapacity(10));<code>
 * 
 * @param size the number of items that will be put into a HashMap
 * @return initial capacity needed
 public static final int calcCapacity(int size)
 return ((size * 4) + 3) / 3;
 * Creates a new <code>HashMap</code> that has all of the elements
 * of <code>map1</code> and <code>map2</code> (on key collision, the latter
 * override the former).
 * @param map1 the fist hashmap to merge
 * @param map2 the second hashmap to merge
 * @return new hashmap
 public static HashMap merge(Map map1, Map map2)
 HashMap retval = new HashMap(calcCapacity(map1.size() + map2.size()));
 retval.putAll(map1);
 retval.putAll(map2);
 return retval;
 * spit out each name/value pair
 public static String mapToString(Map map){
 Set entries = map.entrySet();
 Iterator iter = entries.iterator();
 StringBuffer buff = new StringBuffer();
 while (iter.hasNext())
 Map.Entry entry = (Map.Entry) iter.next();
 buff.append("[" + entry.getKey() + "," + entry.getValue() + "]\n");
 return buff.toString();
}Then then just calling the methods from within a rule in XPRESS.
<Rule name='Inserve - mergeHashMap'>
<RuleArgument name='map1'/>
<RuleArgument name='map2'/>
<block>
 <set name='map1'>
 <map>
 <s>A</s>
 <s>1</s>
 <s>B</s>
 <s>2</s>
 </map>
 </set>
 <set name='map2'>
 <map>
 <s>C</s>
 <s>3</s>
 <s>D</s>
 <s>4</s>
 </map>
 </set>
 <invoke name='merge' class='se.inserve.util.HashMapUtils'>
 <ref>map1</ref>
 <ref>map2</ref>
 </invoke>
</block>
<MemberObjectGroups>
 <ObjectRef type='ObjectGroup' id='#ID#Top' name='Top'/>
</MemberObjectGroups>
</Rule>This gives the output:
<Map>
<MapEntry key='A' value='1'/>
<MapEntry key='B' value='2'/>
<MapEntry key='C' value='3'/>
<MapEntry key='D' value='4'/>
</Map>I typically create a jar-file with my custom classes which i place in $WSHOME/WEB-INF/lib.
Good luck and hope this helps. Im sure there are better ways to do this, but this did the trick for me.
/Anders

Mapping in BPM: how to merge results of receive steps into send steps

Hello,
we need the following BP:
1. async. Receive Step: receive an IDoc
2. sync. Send Step: WebService request using the content of an IDoc field.
The WebService returns some data we need for the destination structure.
3. Transformation???
4. async. Send Step: we have to merge and map the Idoc fields and the
resulting fields of the WebService into the destination structure.
What are the basic steps and objects therefore?
IDoc-message X --> |
WebService-message Y --> | --> Z dest-message
Out problem is, how an where to get access to both Source Messages to merge them for the destiniation message?
Regards
Gunnar

1. async. Receive Step: receive an IDoc
2. sync. Send Step: WebService request using the content of an IDoc field.
The WebService returns some data we need for the destination structure.
3. Transformation???
4. async. Send Step: we have to merge and map the Idoc fields and the
resulting fields of the WebService into the destination structure.
>>>>
1. async. Receive Step: receive an IDoc - OK
2. sync. Send Step: WebService request using the content of an IDoc field.
The WebService returns some data we need for the destination structure. - OK
3. Transformation - this transformation step will have 2:1 mapping. source would be IDOC and response of WS mapped to result.
4. async. Send Step: Send the result

How to create a PortalSite map in a tree structure

Hi,
We are trying to reuse SAP Portal EP 7.3 standard functionalities related to create a Portal Site Map.
I've seen the procedure to create a Workset map iview (http://help.sap.com/saphelp_nw73/helpdata/en/49/32a7a9e8c45aaae10000000a42189d/frameset.htm), but we are interested in generate this map contained in a tree structure, because currently the SAP EP 7.1 brings the menu and option format.
I would like to know if this is possible using the standard functionalities or it is required to develop any application?
Please if you could help me it would be really useful.
Thanks in advance,

Thanks for your help Srinivas,
I was trying to know if it was possible to assign a style or layout to the site map iview created using the standard map iview delivered by SAP EP 7.3. I was looking for documentation but it is not enough at all and in my project we are still working with SAP EP 7.0
Please, if anyone could know about the map site iview standard and the available styles or maybe it is not changeable.
In that case, the only way it would be a development to get the tree structure.
Thanks!!!!

Using Map Files / Map IDs

Heya,
RH9, merged webhelp
I'm trying to set up Map IDs for a quasi-context sensitive help feature, and I'm feeling a bit overwhelmed. I've read through the RH9 help which links to the Grainge website and a couple more links, but I'm still not sure what to do.
First, the background:
We auto-generate a set of release notes for new features and fixes. This is done using a script that pulls the relevant information out of Dovetail (basically where all our support and development cases are stored). So basically our release list shows the case number, the area of the software, and a brief summary of the fix/feature. The release notes are script-generated as an .html file that we can link to in help.
The issue is that they want me to alter the release notes so that the case number serves as a hyperlink to the relevant topic in help. So, for example, if we had a new feature for widget making, case number 12345, the release notes entry for this would have a hyperlink that would take the user to the 'Widget Making' help topic.
My thinking is that I can use the case numbers as Map IDs, ie assign Map ID '12345' to the 'Widget Making' topic, and then create a generic link in the release notes that can 'insert' the relevant case number when the user goes to find that associated help topic.
Potential Issue:
We use a merged help system, but we do not need to merge map files. Our help system consists of one mostly-empty parent project (title page, about page, etc.), a project that contains the majority of our topics, a project that contains database information for technical users, and a few other odd projects. All of the linked topics are going to be in the same main child help project. Because of this, the map file/IDs are going to be a single set in a single project, but not the parent project.
Does this only affect the pathway for the basic link (e.g. "webhelp/mergedProjects/child1.htm" instead of "webhelp/start.htm"?), or are there other considerations? For example, the merged help map ID topics I've seen talk about using number ranges to denote the different projects, but since we've only the one, do we really need to do that? To me, it seems like we should be able to use a relatively straight-forward single-project type link, with the only difference being that the the link goes to a child project folder and not the main webhelp folder.
So far in testing, the link doesn't work, so I'm wondering if either the URL is not as straight-forward as I hoped, or I'm missing something else due to the nature of how our webhelp is set up. Because it's a child, do we still need to 'merge' map files even if we don't need one for the parent? (ie we create an empty parent map file, merge it with the child, and link to the parent?)
Thanks for any tips/advice!

Hi,
When you use CSH in a merged project, the master project will automatically check all child projects when the context sensitive id cannot be found in the master project. Peter’s method includes merging the map files but I don’t think that is necessary. We have several merged projects that work perfectly without merging the map files. But Peter is the authority on merged help
It is important to first get the terminology straight. In WebHelp there are Map ID’s and Map numbers. The Map ID (or topic id) is an alphanumeric string that can be anything from one character to a hundred or more characters. Then there are the Map numbers. Map numbers are a number between 1 and 4.294.967.295.
The terminology is important because what RoboHelp calls a Map ID may be referred to as a map number. Reading the article on Peter’s site I get the impression that what is called a Map ID on Peter’s site is actually the Map number in RoboHelp. (Please correct me if I’m wrong Peter.) The Map ID in RoboHelp is the Topic ID on Peter’s site. See step 8 of the article, it describes how to create a test page using the default RoboHelp JavaScript API. But that test page actually uses the map numbers as the default JS API does not support topic id’s, only map numbers.
Your map file tells the following:
‘12345’ is the Map ID or topic ID.
‘1’ is the Map number. The Map ID referred to on Peter’s site if I’m not mistaken.
Calling the Map number 12345 will not work if you use the default method because you are looking for the wrong number. Try the following:
Say that your master project is placed on http://localhost/newproject.htm. Open a new browser window and add the following URL in the browser where you replace the url with the url your project is placed:
http://localhost/newproject.htm#<str=12345
Does this get the desired result? Also try the test page but use ‘1’ instead of ‘12345’. Does this also get the correct page?
You (or your developers) may also be interested in my WebHelp CSH dissection: http://www.wvanweelden.eu/robohelp/webhelp/csh Note that this article is aimed at developers and does not provide any direct answers, but it will help you understand the different settings in RoboHelp.
Hope this doesn’t confuse you and I hope my assumptions about your intended action are correct.
Greet,
Willam

Mac Users + OVI Maps Build ClientIndex

For Mac users unable to use Nokia Maploader for Mac here is how to merge index links provided by ovikovi
IndexAsia
IndexAustralia/Oceania
Index Africa
Index NorthCentralAmerica
Index South America
Index Europe
Unzip folders and drag respective folders to Documents as here
Documents
It is probably helpful to open this screenshot now
Merge ClientIndex
Create a New Folder in Documents ClientIndex
Open Terminal on Mac > Finder > Go > Utilities > Terminal
Type after $ prompt cd Documents <hit return>
Type after $ prompt cp -r Africa/* ClientIndex <hit return>
Repeat with index for other countries as in terminal screenshot
When finished drag ClientIndex folder to E:\CITIES\diskcache
This procedure also works for merging individual maps and is documented elsewhere on forum.
Happy to have helped forum in a small way with a Support Ratio = 37.0
Solved!
Go to Solution.

England
Northern Ireland
Scotland
Wales
French regions:
Alsace
Aquitaine
Auvergne
Bretagne
Bourgogne
Centre
Champagne-Ardenne
Corsica
Franche-Comté
Langedoc-Roussillon
Limousin
Lorraine
Midi-Pyrénées
Normandie
Nord-Pas-de-Calais
Paris-Ile-de-France
Pays-de-la-Loire
Poitou-Charentes
Provence-Alpes-Côte-d'Azur
Rhône-Alpes
German regions:
Baden-Württemberg
Bayern
Berlin/Brandenburg
Hessen
Mecklenburg-Vorpommern
Niedersachsen/Bremen
Nordrhein-Westfalen
Rheinland-Pfalz/Saarland
Sachsen
Sachsen-Anhalt
Schleswig-Holstein/Hamburg
Thüringen
Italian Regions:
Abruzzo
Basilicata
Calabria
Campania
Emilia-Romagna
Friuli-Venezia Giulia
Lazio
Liguria
Lombardia
Marche
Molise
Piemonte
Puglia
Sardegna
Sicilia
Toscana
Trentino-Alto Adige
Umbria
Valle d'Aosta
Veneto
Spanish regions:
Andalucía
Aragón
Asturias
Islas Canarias
Cantabria
Castilla y Léon
Castilla la Mancha
Catalunya
Ceuta
Communidad Valénciana
Extremadura
Galicia
Islas Baleares
La Rioja
Madrid
Melilla
Murcia
Navarre
País Vasco
Happy to have helped forum in a small way with a Support Ratio = 37.0

Image map mac problems

I have created a html file used as a signiture in outlook.
When i send this out it works fine on pc outlook but when it is
opened on a mac the links that i defined using image maps don't
come across and it won't link to the site i choose
code is
<map name="ipc" id="ipc">
<area shape="rect" coords="5,581,601,774" href="
http://www.google.co.uk"
target="_blank" />
cheers

hi
please go through this thread it will help you.please don,t forget to give points
Workset Map Iview
with regards
subrato kundu

Merging Workset Maps?

Similar Messages

Maybe you are looking for