Mes# AA416:partial scrapping of asset with no value in the 0L ledger

Hi,
When I try to perform partial scrapping of an asset having no value in the 0L ledger (depreciation book) and some value TL ledger(tax book) with Tr Type 200, I get the error, "Retirement of old assets data not possible (No existing old assets data)" mes no AA416."
Can anybody please help me out with this issue.
Thanks
Aparna

Dear Bernhard,
Thansk for the reply!!
Apologies for replying after such a log time!! I was on leave for last 3 weeks , so, could not proceed furthur. I checked in the system regarding the suggetion you provided. I am trying to execute partial scrapping by the transfer variant which is having the tr type 220. However, tr type 220 is not restricted to any dep area. But I am not able to post.
My query is: Should I create one more transaction tyepe similar to tr type 200, restrict it to the dep area 15 (as we need to partailly scrap the assets which are having 0 value in 0L ledger and some value in TL ledger) and one more transfer variant and assign the new tr type to this new transaction varaint?
Thanks & Regards
Aparna

Similar Messages

Acquisition of an Asset with Negative value

Hi Gurus,
How to do acquisition of an asset with negative value?
Please tell me the Tcode for doing this transaction.
Please revert asap.
Thank You

Hi,
The business scenario is.............
We have to charge some interest on asset last year but we have not charged it.
Now asset value is zero and if we charge interest on it, it will go to negative.
That's we are thinking to create new asset with negative value.
Hope this will help you understand.
Please revert asap.
Thank You

Report for Asset with only values (No Zero values)

Hi All
There is requirement where in the user wants to genenerate report for assets with values .There should not be Zero balance assets included in the output. In short only with values in the asset master the report needs to be generated. Can one have any idea on this .
regards
Navin
Edited by: Naveen Rao on Jan 22, 2009 10:04 AM

Hi
Can you please specify the report name.
regards
Navin

How to set an attribute of a HTML tag with a value in the Servlet

I have a HTML page and a Servlet.
The HTML page sends a request to the Servlet.
The Servlet has to read the contents of the HTML page. When the Servlet encounters the body tag it should set the bgcolor attribute of the body tag with a string(For eg.a string called color with a value blue) in the servlet.
After doing this the Servlet has to update the original HTML page with the changes (in the body tag).
I need a help on this.

Hi sangee,
you could get what you want to do by using a Java Server Page instead of both a HTML page and a Servlet.
I should code something like this:
<%Strung color="yourColor"%>
<html><head><title></title></head>
<body bgcolor="<%=color%>
</body>
</html>

How can I create a hashmap() with multiple values for the same key?

I am trying to write an application that will us something like a Map() with multiple values but some have the same key. Is this possible?

i had the same question. just create a List, add all the values u want to it, and then put the List into the map like u would a normal single value. e.g.
List list = new ArrayList();
list.add(value1);
list.add(value2);
map.put(key, list);
i bet u r doing the same course as i am =)

Handling unpredicted error message with return value of the same in BDC

Hi all,
When i create a bdc program to create a purchase order , the screen stops at an message (of type I).
in background mode (eg : Sometimes becoz of condensing problem in fields and character conversion).
In such cases i need to move on with transaction by handling this popup.
Is there any way that i could atleast handle an information(Non critical) message and make the value of the message as always 'OK' .

Hi,
FORM populate_data USING    value(p_fieldname)
                             value(p_fieldval).
CLEAR t_bdcdata.
bdcdata-fnam = p_fieldname.
bdcdata-fval = p_fieldval.
    Condense p_fieldname.
    Condense p_fieldval.
APPEND t_bdcdata.
ENDFORM.
Hope this Code will Work.
Provide me with your Code i will try to help you....
Thanks
kalyan.

Replacing the old value with new value on the website

Hi ,
I have two input fields CLIN # and PR#.When i enter the text,for the first it is working fine,second time when i enter it is replacing the value which i enter with the first one.I should not replace the old value.
ex:
Example when i enter test5 for the first time
CLIN # :Test 5
Next when i enter Test6 ,this value replaces the first one
CLIN#: Test6
CLIN#:Test6(there is no test5)
I am doing for my istore application.Any ideas

As the user that created the anonymous block ruun:
select count(*) from general_acct_mast_table;
and
select tbaadm.count(*) from general_acct_mast_table;I strongly suspect that they are actually two different tables, and the tbaadm version is substantially larger that the non-qualified one.
In any case I would not be doing this as a row-by-row procedure. I would create two lookup tables like:
create table masked_general as
select acid, foracid, round(dbms_random.value(81000000,85000000)) masked
from (select distinct acid, foracid
      from general_acct_mast_table
      where acct_ownership not in ('O'));
create table masked_stmnt as
select * from masked_general;
alter table masked_general add constraint masked_general_pk
   primary key (acid);
alter table masked_stmnt add constraint masked_stmnt_pk
   primary key (foracid);Then do the updates as:
update (select g.foracid, g.acid, gm.masked
        from general_acct_mast_table g
           join masked_general gm
              on g.acid = gm.acid)
set foracid = masked;
update (select s.foracid, sm.masked
        from mini_stmnt_details_table s
           join masked_stmnt sm
              on s.foracid = sm.acid)
set foracid = masked;Note that this assumes that both acid and foracid are individually unique in general_acct_mast_table, which seems to be implied by your procedure, and that you want to be able to roll the whole thing back if there are problems (that is, you do not want to commit between the update of general_acct_mast_table and mini_stmnt_details_table).
I would also probably a a verification step after creating the first masked table to ensire that you did get unique vluaes back fo the masked column.
John

Apex flash charts with date values on the x axis

I am playing around in Apex 4 using flash charts and having a bit of troubles playing with dates on the x axis on a 2d line chart.
What I am trying to achive is a values plotted across the chart and the date/time values are not a constent (ie not continually say 1 hour apart) hence why I want to use a datatype of date.
In the SQL below:
select null as link, sysdate -2 as value, 0 as label from dual
union
select null , sysdate -2+1/24 , 1 from dual
union
select null , sysdate -2+2/24 , 2 from dual
union
select null , sysdate -2+5/48, 1 from dual
union
select null , sysdate -2+3/24, 0 from dual;I get a 2D Line chart but each date/time value is equally space apart (ie sysdate -2, sysdate -2+1/24, sysdate -2+2/24 and sysdate -2+3/24 should be 1 unit apart and sysdate -2+5/48 should be half way between sysdate -2+2/24 and sysdate -2+3/24).
I think I have to use custom xml. Using http://www.anychart.com/products/anychart/docs/xmlReference/index.html and http://www.anychart.com/products/anychart/docs/users-guide/DateTime-Axes.html I edited the XML and changed:
<?xml version = "1.0" encoding="utf-8" standalone = "yes"?>
<anychart>
<settings>
 <animation enabled="false"/>
 <no_data show_waiting_animation="False">
 <label>
 <text></text>
 
 </label>
 </no_data>
</settings>
<margin left="0" top="" right="0" bottom="0" />
<charts>
 <chart plot_type="CategorizedVertical" name="chart_1614502819445708">
 <chart_settings>
 <title enabled="False" />
 <chart_background>
 <fill type="Solid" color="0xffffff" opacity="0" />
 <border enabled="false"/>
 <corners type="Square"/>
 </chart_background>
 <data_plot_background>
 </data_plot_background>
 <axes>
 <y_axis >
 <scale mode="Normal" />
 <title enabled="false" />
 <labels enabled="true" position="Outside">
 
 <format><![CDATA[{%Value}{numDecimals:0,decimalSeparator:.,thousandsSeparator:\,}]]></format>
 </labels>
 <major_grid enabled="False"/>
<minor_grid enabled="False"/>
 </y_axis>
 <x_axis>
 <scale mode="Normal" />
 <title enabled="false"/>
 <labels enabled="true" position="Outside">
 
 <format><![CDATA[{%Value}{numDecimals:0,decimalSeparator:.,thousandsSeparator:\,}]]></format>
 </labels>
 <major_grid enabled="True" interlaced="false">
 <line color="Black" />
 </major_grid>
<minor_grid enabled="True">
 </minor_grid>
 </x_axis>
 </axes>
 </chart_settings>
 <data_plot_settings enable_3d_mode="false" >
 <line_series>
 <tooltip_settings enabled="true">
 <format><![CDATA[{%Name}{enabled:False} - {%Value}{numDecimals:0,decimalSeparator:.,thousandsSeparator:\,}]]></format>
 
 <position anchor="Float" valign="Top" padding="10" />
 </tooltip_settings>
 <label_settings enabled="true" mode="Outside" multi_line_align="Center">
 <format><![CDATA[{%Value}{numDecimals:0,decimalSeparator:.,thousandsSeparator:\,}]]></format>
 <background enabled="false"/>
 
 </label_settings>
 <line_style>
 <line enabled="true" thickness="1" opacity="1" />
 </line_style>
 <marker_settings enabled="True" >
 <marker type="Circle" />
 </marker_settings>
 </line_series>
 </data_plot_settings>
#DATA#
 </chart>
</charts>
</anychart>to
<?xml version = "1.0" encoding="utf-8" standalone = "yes"?>
<anychart>
<settings>
 <animation enabled="false"/>
 <no_data show_waiting_animation="False">
 <label>
 <text></text>
 
 </label>
 </no_data>
 <locale>
 <date_time_format>
 <format>%HH:%mm:%ss %dd/%MM/%yyyy</format>
 </date_time_format>
 </locale>
</settings>
<margin left="0" top="" right="0" bottom="0" />
<charts>
 <chart plot_type="CategorizedVertical" name="chart_1614502819445708">
 <chart_settings>
 <title enabled="False" />
 <chart_background>
 <fill type="Solid" color="0xffffff" opacity="0" />
 <border enabled="false"/>
 <corners type="Square"/>
 </chart_background>
 <data_plot_background>
 </data_plot_background>
 <axes>
 <y_axis >
 <scale mode="Normal" />
 <title enabled="false" />
 <labels enabled="true" position="Outside">
 
 <format><![CDATA[{%Value}{numDecimals:0,decimalSeparator:.,thousandsSeparator:\,}]]></format>
 </labels>
 <major_grid enabled="False"/>
<minor_grid enabled="False"/>
 </y_axis>
 <x_axis>
 <scale mode="Normal" type="DateTime" />
 <title enabled="false"/>
 <labels enabled="true" position="Outside">
 
 <format><![CDATA[{%Value}]]></format>
 </labels>
 <major_grid enabled="True" interlaced="false">
 <line color="Black" />
 </major_grid>
<minor_grid enabled="True">
 </minor_grid>
 </x_axis>
 </axes>
 </chart_settings>
 <data_plot_settings enable_3d_mode="false" >
 <line_series>
 <tooltip_settings enabled="true">
 <format><![CDATA[{%Name}{enabled:False} - {%Value}{numDecimals:0,decimalSeparator:.,thousandsSeparator:\,}]]></format>
 
 <position anchor="Float" valign="Top" padding="10" />
 </tooltip_settings>
 <label_settings enabled="true" mode="Outside" multi_line_align="Center">
 <format><![CDATA[{%Value}{numDecimals:0,decimalSeparator:.,thousandsSeparator:\,}]]></format>
 <background enabled="false"/>
 
 </label_settings>
 <line_style>
 <line enabled="true" thickness="1" opacity="1" />
 </line_style>
 <marker_settings enabled="True" >
 <marker type="Circle" />
 </marker_settings>
 </line_series>
 </data_plot_settings>
#DATA#
 </chart>
</charts>
</anychart>and change the SQL series to:
select link, to_char(value, 'HH24:MI:SS DD/MM/YYYY') as value, label from
select null as link, sysdate -2 as value, 0 as label from dual
union
select null , sysdate -2+1/24 , 1 from dual
union
select null , sysdate -2+2/24 , 2 from dual
union
select null , sysdate -2+5/48, 1 from dual
union
select null , sysdate -2+3/24, 0 from dual)But the chart changes from a line chart to a bar chart with each value being equally spaced.
Can anyone see what I am doing wrong or point me in the right direction? Thanks in advance.

This will be a little bit lengthy answer, but I guess it will be easier to understand what I meant to say.
I created a table that contains values you used as a data source (just to make my life easier):
SQL> alter session set nls_date_format = 'dd.mm.yyyy hh24:mi:ss';
Session altered.
SQL> select * from test;
VALUE LABEL
12.10.2010 09:03:45 0
12.10.2010 10:03:45 1
12.10.2010 11:03:45 2
12.10.2010 11:33:45 1
12.10.2010 12:03:45 0
SQL> alter session set nls_date_format = 'hh24:mi';
Session altered.From now on, we'll see only hours and minutes.
Step 1: current and previous values - difference in number of MINUTES
SQL> select t.value,
2 lag(t.value) over (order by t.value) previous_value,
3 (t.value - lag(t.value) over (order by t.value)) * 24 * 60 minutes_diff
4 from test t;
VALUE PREVI MINUTES_DIFF
09:03
10:03 09:03 60
11:03 10:03 60
11:33 11:03 30
12:03 11:33 30Step 2: a little bit of calculation:
- TIME_SPAN: how many minutes are there between MIN and MAX date?
- MIN_DIFF: what is the minimum time difference (minutes)?
- SLICES: how many time slices do we want on the x-axis?
SQL> select
2 min(x.value) min_val,
3 max(x.value) max_val,
4 min(x.minutes_diff) min_diff,
5 (max(x.value) - min(x.value)) * 24 * 60 time_span,
6 (max(x.value) - min(x.value)) * 24 * 60 / min(x.minutes_diff) slices
7 from (select t.value,
8 lag(t.value) over (order by t.value) previous_value,
9 (t.value - lag(t.value) over (order by t.value)) * 24 * 60 minutes_diff
10 from test t
11 ) x;
MIN_V MAX_V MIN_DIFF TIME_SPAN SLICES
09:03 12:03 30 180 6There's 180 minutes between 09:03 and 12:03; minimum time difference in our TEST table is 30 minutes, so - we want to have 6 time slices on the x-axis (180 / 30).
Step 3: row generator technique: let's create time values that are missing:
SQL> select y.min_val + (level - 1) * y.min_diff / (24 * 60) val
2 from (select
3 min(x.value) min_val,
4 max(x.value) max_val,
5 min(x.minutes_diff) min_diff,
6 (max(x.value) - min(x.value)) * 24 * 60 time_span,
7 (max(x.value) - min(x.value)) * 24 * 60 / min(x.minutes_diff) slices
8 from (select t.value,
9 lag(t.value) over (order by t.value) previous_value,
10 (t.value - lag(t.value) over (order by t.value)) * 24 * 60 minutes_diff
11 from test t
12 ) x
13 ) y
14 connect by level <= y.slices + 1;
VAL
09:03
09:33
10:03
10:33
11:03
11:33
12:03
7 rows selected.OK, now we have 30 minutes between every time value.
Step 4: join newly generated time values with the original table. Use OUTER JOIN; missing labels will be 0 (zero):
SQL> select
2 null link,
3 to_char(z.val, 'hh24:mi') new_value,
4 nvl(t1.label, 0) new_label
5 from (select y.min_val + (level - 1) * y.min_diff / (24 * 60) val
6 from (select
7 min(x.value) min_val,
8 max(x.value) max_val,
9 min(x.minutes_diff) min_diff,
10 (max(x.value) - min(x.value)) * 24 * 60 time_span,
11 (max(x.value) - min(x.value)) * 24 * 60 / min(x.minutes_diff) slices
12 from (select t.value,
13 lag(t.value) over (order by t.value) previous_value,
14 (t.value - lag(t.value) over (order by t.value)) * 24 * 60 minutes_diff
15 from test t
16 ) x
17 ) y
18 connect by level <= y.slices + 1
19 ) z,
20 test t1
21 where t1.value (+) = z.val
22 order by z.val;
L NEW_V NEW_LABEL
09:03 0
09:33 0
10:03 1
10:33 0
11:03 2
11:33 1
12:03 0
7 rows selected.Cool, so we have them all. Now, go to Apex and create a chart using a query from step #4.
I tested it - it displays something which means that it should work for you too (unfortunately, this forum doesn't accept attachments so that you could see it). Now, I can't tell whether that's what you need or not, but - if the idea itself is OK, it can be adjusted (I hope so).

ABT1N and parallel depreciation area, receiving Asset with zero value

Hello,
This is the case, ABT1N, same Chart of Depreciation. Transfer from Company A to B.
Values are copied for Depreciation Area 01 in Company B but not for Area 90 (Parallel Depreciation Area). Zero Amounts in Area 90.
Dep Area
01     => Main Ledger 0L
90     => Parallel Ledger L1
91     => Delta 01-90
I will appreciate any idea/clue.
Thanks in advance for your help.

Found it, Transfer Method in Transfer Variant should be '4' (Gross method with transfer of values to dependent areas).

Camparing file name with a value of the field in the source

Hi All,
I have a file sender. I need to compare the file name with the value of a field in the source and then map to the target.
For example:
<Record>
<Date>20071103></Date>
<name>abcd</name>
</Record>
the name of the file would be 20071103. i need to check this file name with value in 'date' field , if its true then we need to map it to target
please suggest some way to meet the reqirement
thanks
jhansi

Hi,
Here is the reason i need to do this:
The data is loaded by DTP in process chain. Overlaping requests are deleted. But, iIn some cases requests with the same selection options need not to be deleted. My idea was to change selection options in Manage(infocube) with Abap program without changing selection options in DTP filter, so that the system would not recognize requests as "overlaping requests".
So, where is the information about shown in the field Selection Options is stored? In which tables?
Thanks
Tigr_Z

IT0041 : Same date type with different values in the same infotype

Hi,
Is it possible to store in the 0041 infotype, the same type date but with a diffentent date.
Example :
IT0041
employee 1000:
date type : xx 01.05.10
date type : xx 02.05.10.....
Thanks

Hi there,
My two cents.
I don't think it can be done in standard. Also copying IT 0041 would limit you to enter only 12 dates.
My suggestion:
Create a custom infotype with subtype field and a date field like IT 0015.
On the screen you will only be seeing subtype and date. And assign time constraint 3 to it.
In this way with the same subtype you can record several dates.
cheers
Ajay

Problems with numeric values in the barcode

Hi
I have a problem with the data from a numeric field, when it is encoded in the barcode the validation pattern seems to be ignored.
I have set the validation pattern of the numeric field to be
num{9999}
And when I enter a value like "0200" it is displayed in the form as "0200", which is correct.
BUT in the barcode the value is captured as "200", which i NOT what I want. I need all four characters to be in the barcode. Even when the first one i 0 (zero).
How can I do that?
Kirstine

Can you send the form to [email protected] and I will have a look. Please include a description of the issue in the email as the email and this forum are not tied together.
paul

Remove Entries with no value in the total "Resource Assignment"

Dear all,
I am looking for a view where when i do not use any filters in the Resource view with Summery view selected, and when i choose the date range, i want only tasks with actual work done during that selected period to show.
that is if the total for a specif task is blank, do not show in the list.
i am currently doing that by exporting the view to excel and filter the total to remove the blank.
thank you for your help
Traffic Manager Born Interactive

Hi AsaadSaleh,
I'm not sure to well understand but as far as I get it, you'd like to filter on tasks that have started (ie actual work or actual start date) on a specific period.
I'd advice you the following:
Copy and rename the existing filter "time interval" (not sure of the translation, my Project is in french...)
Add a condition "AND" with for example actual start date different from "NC"
Then you might add this custopm filter in a custom view.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

Item with many values in the same page

Hi!
This is how ma page will look :
item 1 : textfield
item 2 : textfidl
item3 : list1
list2
... list3
button add item3
item3 can take mutiple values (1 or more) for the same
values of item1 ans item2.
the user has to click on a button in order to add a value to item3
I am looking for how can I do that ?
thank you for help

Sorry Kglad, I didn't mean to be rude. With "No coding
errors" I meant the animation itself runs with no errors. I'm sure
you could run the 20 instances with no freezing (that's why I put
the post :) ) But I'm affraid it is an animation for a client, so I
cannot distribute the code.
Perhaps I didnt explain the situation clearly enough (in part
because of my poor english...).-
- By 20 instances I mean 20 separated embedded objects in the
html
- The animation is relatively simple. A turned on candle, in
each cycle I calculate the next position of the flame (that
oscilates from left to right). The flame is composed by 4
concentric gradients. There is NO loops, only an 'onEnterFrame'
function refreshing the flame each time.
- It's true that I got plenty variables at the _root level.
If that could be the problem, how can I workaround it?
- It is my first time trying to embed so many objects at the
same time too. No idea if the problem could be the way I embed the
object from the html :(
- The only thing I can guess is that when a cycle of one of
the object is running, the other 19 objects must wait their turn.
That would explain why the more instances I run, the worst results
I get. In that case, I wonder if there's a way to run them in a
kind of asynchronous mode, just guessing...
Any other comment would be appreciated. Anyway, thanks a lot
everybody for your colaboration.

[dev tools] ID starting with numeric value crashes the DOM inspector

Hello,
I posted a bug on bugzilla without any answer and like to ask if anybody is able to reproduce the problem: https://bugzilla.mozilla.org/show_bug.cgi?id=1002280.
This is quite annoying since I'm working on old code falling into the test case of my report.
Thank you in advance for answers.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item: 
[[Image:FirefoxSafeMode|width=520]] 
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Keep checking your bug report . Your problem will be solved soon .
Thank you.

Mes# AA416:partial scrapping of asset with no value in the 0L ledger

Similar Messages

Maybe you are looking for