Mes.no. AAPO168:"Enter quantity in KAR asset S001 1000049-0 has quantity ..

Hi All,
I've created an asset with quantity.
Than, posing by F-90, SAP gives me the worning message no. AAPO168:
"Enter quantity in KAR asset S001 1000049-0 has quantity update"
I think I should fill in the quantity posting by F-90.
I can't find where I must do it in F-90. Could anyone help me?
Thanks
Gandalf

hi
in Asset fill the field Quantity as " 1 No or 1 Ea. and try to do f-90.

Similar Messages

  • How to store entered quantity in a new object property in Agentry

    Hi,
    The scenario is that I want to store the quantity entered while receiving MatStocks.
    User can enter quantity to receive stocks (Shown with red outline in Screenshot below)
    I want to store this quantity in a new field Called ReceiveQuantity for each material document.
    Please guide me on this.
    Regards
    Pritam

    Prit,
    This is just basic Agentry.  You should go over some of the introduction documentation to understand these concepts:
    http://scn.sap.com/docs/DOC-47882
    Add a property to your object to hold the new data.  Add the same property to the transaction and tie it to the object property.  On the screen, tie the editable screen field to the transaction property.
    Jason Latko - Senior Product Developer at SAP

  • ERROR : in BADI for MIGO  Enter quantity on external screen

    Hi,
    I am doing MIGO and getting the following error:
    Enter quantity on external screen Message no. M7895
    I Have added an external tab at the header level as well as the item level using the badi for tab addion in MIGO .
    If i deactivate the BADI  MIGO works fine  .
    How to analyse for the error .
    Please help
    Regards
    Swapnil

    HI Experts,
    As mentioned in above thread for the Error: Enter unit of measure on external screen Message no. M7895;and same is solved by your functional consultant,since i am also getting same error,It would be very helpfull to me,if you tell me the solution for this error what exactly your functional consultant has done.
    Regards
    varunraj

  • Got error "Enter distribution rule for Asset without a validity limit"

    Hi
    I need to make AUC settlement to GL account using t.code AIAB. I have maintained the settlement rule but when I click on check button I got message " Enter distribution rule for Asset without a validity limit". The error msg no. KD059.
    Thanks in advance.

    Please do the
    following. , instead of assigning cost center, assign fixed asset(any asset)
    Then go back and click on detach then create your normal rule again at the same
    line
    The rule is that AUC should have at least one settlements rule for fixed asset
    even if it not used

  • Asset is incomplete and has to be completed

    Dear experts
    while closing the asset year 2008 im getting the error "Asset is incomplete and has to be completed "
    I opened the transaction code AUVA
    I got incomplete assets list with depreciation start date for 15 depreciation area.Please find the below asset details which i got from AUVA transaction code.   
    Asetcomplete.ind ;States Of Completeness,    layout,   FG,   feild name,       Deparea,   View,     Views,
    600658,         1,     Red color,                       1000 ,       03,   ANLB-AFABG,      15,           1,           13,
    But im unable to enter the depreciation start date in the asset master data for 15 depreciation area as it is display mode
    Could you please any one tell me how can I change the  asset depreciation start date in display mode or complete the asset from incomplete asset status
    Now my year end  activites are pending due to this incomplete asset statues.
    I can not nopt delete the asset as already capitalaized the same.
    Thanks in advance
    Suneetha

    AS23 group asset already maintained depreciation area.
    depreciation start date is not maintained for main asset 15 depreciation area not for group asset
    for main asset we are maintaining 01 and 15 depreciation areas.for 01 depreciation start date has been given for 15 area deprecition start date has been given
    main asset linked group asset already maintained depreciation start date for 15 area.

  • Please can anyone help me to download some apps for my iphone .. i am simply not able to log in to the itunes store , when i enter my apple id it says that it has not yet been used with the itunes store

    please can anyone help me to download some apps for my iphone .. i am simply not able to log in to the itunes store , when i enter my apple id it says that it has not yet been used with the itunes store

    Ok, you should generally only get this when you are converting your ID to an iTS account for the first time.
    Sign into iTunes with your Apple ID and you should get this.... IRC once you agree or accept it's now an iTS account and you wont get that again.

  • I have entered the passcode wrong many time my iphone has been disabeld how can i open it

    i have entered the passcode wrong many time my iphone has been disabeld how can i open it

    you will have to wait until you can try again,
    i believe the only way if you don't know the passcode is to factory reset through itunes which you will lose everything from your phone if it hasn't been backed up

  • AJAB(Asset is incomplete and has to be completed)

    Hi All,
    While closing AJAB with test mode  we are getting error'Asset is incomplete and has to be completed.'
    below is reason for above issue:
    We have run depreciation for co.code xxxx  for the month of March period  with final mode 2 days back.
    Today we have transferred some values for  the 2 Assets(poting back date 31.03.2011) which have been alreday run depreciation for the month of March.
    When we ran depreciation with  repeat mdoe  for 2 Assets, depereciation was run sucessfully and alos depreciation posted sucessfully in the Assets also.
    What can we do for this siuation?
    Thanks
    Ram
    Edited by: Ramanjaneyulu.B on Apr 4, 2011 3:04 PM
    Edited by: Ramanjaneyulu.B on Apr 4, 2011 3:07 PM

    Hi Ajay,
    While checking the Asset explorer for the 2 Assets 'depreciation was posted sucessfully for the month of march, when we ran AFBP in the repeat mode.
    However while checking 'AFBP'(Depreciation log) it showing error log, when we click error message, we are getting below.
    Restart not required in the specified period 012.(message no AA713).
    Processing terinmaned beacuse a restart was requested for the period specified but is not required
    System response:
    The restrat function is not required in this period, therefor processing is not continued.
    Processdure:
    Correct the period, if  a restart is required:
    My query:
    When we see depreciation log(AFBP) 2 Assets are showing red mark.
    When we run 'AJAB' there is no error shows.

  • On my login page where my username is and I enter my password, there is a message someone has put there I'd like to remove, and we can't figure what setting to go to to edit it.  Please help.

    On my login page where my username is and I enter my password, there is a message someone has put there I'd like to remove, and we can't figure what setting to go to to edit it.  Please help.

    it's in system preferences > security and privacy > general > show a message when the screen is locked.

  • HT3562 I activated my voiceover and now i cannot enter my passcode to unlock my phone. phone has been disabled due several entering of passcode, phone says connect to iTunes but am unable since phone is still locked. kindly assist

    I activated my voiceover and now i cannot enter my passcode to unlock my phone. phone has been disabled due several entering of passcode, phone says connect to iTunes but am unable since phone is still locked. kindly assist

    If you have an iTunes backup that includes the photos you may be able to extract them from the backup using a 3rd party utility such as http://www.wideanglesoftware.com/ibackupextractor/

  • Run Time Error while Entering Quantity in Sales Order

    Dear All,
    Iam getting Run time Error while iam entering material quantity in sales order.Please  find the screenshot of the same.
    kindly Help Me.Me. Plz note that we had done a system copy two days back to our new server.
    Rgds
    Thomson
    ST22 Screenshot

    Dear All
    Its Resolved Thanks For your Valuable time Support
    INCLUDE LV03VFB4 inside below code trigger error.
    PERFORM VVBBD_AUFBAUEN USING WA_AVBBD
                                        WA_AVBBD-APOMOBILE
                                        DA_SUBRC
                                        DA_UPDKZ
                                        DA_VVBBD_TABIX
                                        0.
    This Was the Error some how 0 was there we are removed the 0 now it is working fine
    Rgds
    Thomson

  • I can't Enter User Fields in Asset Class (t.code S_ALR_87009007)

    Hi All,
    In customizing I've to "Enter Your User Fields in Asset Class" (t.code S_ALR_87009007).
    SAP doesn't allow me to change the filling in the view, I only can display them.
    What cuold it depend on.
    Thanks for your help.
    G.

    Hi Rossi,
    This is not an authorisation issue at all.
    S_ALR_87009007, this tcode can be used to maintain a default Eval Group for asset master creation with the specified asset class.
    If your Maintainace Level at CLASS is not maintained for any evaluation group, you can edit the values over thers.
    SPRO-> FA-> AA ->Master Data -> Screen Layout -> Define Screen Layout for Asset Master Data -> Define Screen Layout for Asset Master Data....here select your screen layout, which is assigned to your questioned asset class on OAOA and click on logical field groups -> Allocations -> Field Group rules.
    Here for all eval groups, make the field status to optional and select check boxes CLASS, MNNO, SBNO and SAVE.
    Now check with S_ALR_87009007, here you will be able to edit the inputs.
    Hope this will resolve your issue.
    Regards,
    Srinu

  • Entering a PO for Asset and Accrual accounts

    Hi,
    We need to enter purchase order for an Asset & Accrual accounts which do not belong to either a cost center, nor a
    work order.We are now entering these invoices without going thru the PO System.
    Any suggestions on this issue would be helpful.
    Thanks

    For accruals, you make an accrual entry which would Debit expense / Credit Liability,
    and then the following month that entry will reverse. These are usually set up as automatic reversing entries. Then
    when the AP invoice is processed, it will be coded to the expense account which is a Debit to Expense and Credit to
    Vendor, but since there will be an accrual reversal posted in the same account they will offset and if equal, net out to
    zero, if the amounts differ, then that difference hits the P/L at that point. It is clean and efficient. You don't have to
    review the accrual account to match up payments against accruals, etc.
    We cannot directly post to the Fixed Assets Balance Sheet Accounts. The PO would need to be
    coded directly to an Asset number, or to an internal order that would settled to the Fixed Asset system. The best
    practice SAP offers for capital expenditures is to use internal order for all purchases. The amounts post to the order,
    and are then settled to the balance sheet sytematically. This give you better reporting capabilites on your capital
    expenditures, and also makes the process run more efficiently.
    This is what I found in one of the other forums.

  • Please fix this problem. "Enter" on our Keyboards means to go to the next line of type. You have enter as a termintor and a normal typist has to try a few times to get used to your site.

    I have a Dell Inspiron with Win-7. I had FF on it but too many conflicts developed so I deleted FF.
    Only I miss FF a LOT! And I want to use it again.
    Can you help me out? Will FF run on Win-7?
    And what do I have to do to make it happen.
    I have a Laptop too. I'll be going to it after we get the Wireless Router working.

    Your title line is certainly not a true statement. It is certainly also used for "Enter", it depends on what you are doing. It also is used for entering the highlighted choice in a dialog window and is part of the reason why my middle mouse button is set to "Enter". Old keyboards used to have two separate keys, one for new line, and one for Enter.
    Perhaps if you explained where it is giving you a problem we could provide a more reasoned answer -- may not be what want, but there is probably logic behind what you get.
    Of course Firefox can run on Windows 7, it would not be popular if it couldn't.
    <br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>
    * Windows 7 Home Premium<br>http://dmcritchie.mvps.org/windows-7/win7.htm
    * Firefox Problems &amp; Issues (Notes)<br>http://dmcritchie.mvps.org/firefox/firefox-problems.htm
    * Firefox and other Browser Keyboard Shortcuts (Comparison Table)<br>http://dmcritchie.mvps.org/firefox/keyboard.htm
    You can make '''Firefox 6.0''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 6.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
    * http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface
    There is a lot more beyond those first 10 steps listed, if you want to make Firefox more functional.

  • Firefox form fields do not clear when selected (i.e., "Enter Zip Code" should disappear when clicked). Has to be erased in vers. 8 & now 12

    I just upgraded from vers. 8 to 12 in order to fix this.
    Can't remember when this started, but it was mid version, not due to an update.
    At first, I thought vendors programmers were getting lazy, but then realized it was too prolific.
    Firefox form fields must be erased manually, after entering -- should go blank as soon as selected.
    Is this a setting I am missing

    In some cases, the temporary ("placeholder") content is inserted by a new method available in HTML5. This page has some boxes you can use to test whether this new feature is working in your Firefox.
    [http://www.html5accessibility.com/tests/placeholder-labelling.html HTML5 placeholder attribute tests] (please ignore the discussion about bugs)
    In other cases, the site may be using a script to clear the temporary content as soon as you click the box. This is necessary to support older browsers. If you block JavaScript on the page -- either by unchecking the Enabled box in the Options/Content tab or using the NoScript add-on -- then the temporary content will not be removed. However, if you are not blocking JavaScript, then the problem could be (i) the site's scripts or (ii) a conflict with another add-on, perhaps one that relates to automatic form filling.
    Can you give an example of a page where this is a problem?

Maybe you are looking for