Mesg processing again n again.

Proxy - SOAP.
When i process a mesg, it reaches receiver and receiver processes it. But then it re process the mesg with the api.messaging exception on the CC.
Receiver, when receives the duplicate msg is behavinig strangely.
I understand that PI for some reason is assuming that this mesg did not process sucesfully and trying to reprocess it albeit the msg has processed sucesfully.
http://farm4.static.flickr.com/3595/3771470592_3085908d37_o.png
Is there a note for this?
Thanks,
Venkat.
Edited by: Venkat A on Jul 30, 2009 1:34 AM

hi Venkat,
Is it a sync scenario where your SOAP receiver is expecting a response back from the receiver system. But beacuse of some reason in receiver there is no response and the receiver channel is going into error.
Regards
Suraj

Similar Messages

  • Messages stuck in the queue... how do I make them to be processed again?

    Hi,
    I'm new to SAP PI and kinda confused with queues.
    I have file -> bpm -> file scenario and there was an error in mapping within bpm process.
    When I went to qRFC Monitor (smq2), I see that in XBQO$PE_WS90000002 queue,
    there's an error, 'Permanent error in BPE inbound processing'... which is expected.
    Now, I run the interface scenario again several times but they don't get processed
    but stuck in the same queue. At this stage, I didn't know what to do...
    I thought by deleting the error message, other messages will be processed...
    I deleted the error message but the other messages are still in the queue...
    I have two questoins.
    1. What is the best way to handle an error in the queue... can I just delete it? or is there a better way to handle an error in the queue?
    2. After deleting the queue, what should I do to make the other messages to be processed again...
    Thank you.
    -Won

    Hi Won,
    There are programs for restarting the LUW entries:
    programs
    · RSARFCRD: tRFC Monitor (transaction SM58)
    · RSARFCSE: Restart an LUW (background job)
    · RSARFCEX: Restart tRFC LUWs (background job)
    · RSQOWKEX: Restart QOUT qRFC LUWs
    · RSQIWKEX: Restart QIN qRFC LUWs
    · RSARFCSE: Delete an LUW (background job)
    · RSARFCER: Delete various LUWs
    Also, check the url:
    http://help.sap.com/saphelp_nw04/helpdata/en/25/bcfa40badbf46fe10000000a1550b0/content.htm
    Hope this helps.
    Regards,
    Sushama

  • ALE Change pointer BDCPS table gets processed again and again

    Hello,
    In Test system, when we run BD21 for DEBMAS, same change pointers getting processed again and again. This did not happen in Dev.
    We did client copy for building Test system from DEV  (Gold client).
    Is it possible to carry over few table entries from Dev (even though it is gold client) and these entries cauing aboev problem while runnign BD21?
    Is there any way to get rid of it? Will BD22 help?
    Thanks.
    Rupali.

    >
    Rupali K wrote:
    > Hello,
    >
    > In Test system, when we run BD21 for DEBMAS, same change pointers getting processed again and again. This did not happen in Dev.
    > We did client copy for building Test system from DEV  (Gold client).
    >
    > Is it possible to carry over few table entries from Dev (even though it is gold client) and these entries cauing aboev problem while runnign BD21?
    >
    > Is there any way to get rid of it? Will BD22 help?
    >
    > Thanks.
    > Rupali.
    Hi Rupali.
    BD22 is used for erase change pointers. Why don't use WPMU ? or WPMA ? Using transaction WPMU, this
    take change pointers, and mark it like processed. I'm using WPMU, and it's  working.
    Regards.

  • I would like to duplicate the folders and apps that I have set up on my iPhone to my iPad.  Is there a quick way of doing this without going through the whole process again manually?

    I would like to duplicate the folders and apps that I have set up on my iPhone to my iPad.  Is there a quick way of doing this without going through the whole process again manually?

    You can restore your iPad with your iPhone backup but items that are iPhone only will not transfer.  It should recreate all your folders.  It can't hurt anything to try.

  • I am trying to download video that i purchased from itunes, but everytime i want to resume the process after pausing it, it automatically start the whole downloading process again, how can i eliminate this problem?

    i am trying to download video that i purchased from itunes, but everytime i want to resume the process after pausing it, it automatically start the whole downloading process again, how can i eliminate this problem?

    They don't normally appear in the download screen ... until I attempt to download another movie. Then they just start appearing. If you click edit - a normal movie download has a circle that appears on the left hand side that allows you to select and delete ... these movies don't have that option so you need to find the movie in you list (under movies) and select the download cloud symbol again to stop it downloading ...you may need to do this a number of times before it stops for a while ... or until you try to download a movie then it starts all over again.
    i have logged out of my itunes account. restarted the iPad, removed all movies, restarted the iPad, logged back into my iTunes account and restarted my iPad .... but as soon as I tried to download a single movies ... the other movies started appearing in the downloads again.

  • Error Process again repoll after error in E-FILING.

    hi ,
    iam executing the report RPCEOYG0 ALV report is exeucuted and when i click on the B2A manager option the message status is 'new and ready to sent' after this
    when iam trying to execute the same i am getting error like
    'Error Process again repoll after error' and also in the history it is showing the communication error.
    how can i correct this error i have gone through the stadard sap e-filing document.
    regards,
    KRUSHI

    Yes. You need to upgrade your XI content in your PI system. The patch what you have applied in your HR sytem has changed the existing stucture which should reflect in IR.
    Please go to service marketplace and check for the respective XI content version. The XI content has been changing for every year:(

  • HT201210 my iphone has been downloading IOS7 all night and it looks like its only halfway done. The bar on the phone is not moving. Should i do a hard shutdown and start the process again?

    My Iphone 4 has been downloading IOS7 all night. Bar on the phone is only halfway. Should i give a hard shutdown on my phone and restart process again?

    Is your iPhone jailbroken? If so see: http://support.apple.com/kb/HT3743

  • Hi - I cannot upload my emails through the mail icon.  The first time I tried it only loaded very old emails, I then tried the whole process again and it has not imported a single email.  I use hotmail, and have had no problems with my iPhone or iPad.

    Hi - I cannot upload my emails through the mail icon.  The first time I tried it only loaded very old emails, I then tried the whole process again and it has not imported a single email.  I use hotmail, and have had no problems with my iPhone or iPad.  So the only way I can check my emails on my mac is to go through the internet.  Can anyone help?

    Hello, do you mean Download?
    In Mail's Window Menu, choose Connection Doctor, any red dots for status, if so what is the message?
    Then click the Show Details button & Check again.

  • HT204088 iTunes Store Credit card can't be processed again...tired of this happening. This is the third time in four days.

    iTunes Store
    Credit card can't be processed again...tired of this happening. This is the third time in four days.

    Well, thanks for feeling with me, patkosanke ... AND for your wise advice.
    I did followed your advice immediately and erased all the service number as well as S/Ns.
    Can you, however, give me any "direct number" through which I can get hold of someone and request for what you're suggesting?
    I believe I had talked with the person by the name of "Charlie" (I think... I hope I'm correct...) when I was having the same problem with the last device. He was very kind and helpful, though I ended up getting the device that brought the same problem.
    Charlie told me that if I had any more problems I should call him. But I forgot to take down his direct number.
    Or maybe I should call the main office and ask for him. But my memory is questionable as to his name, and besides I don't even know his last name either. There could be more than one "Charlies" in Palm.
    So, if you could somehow email me some direct number (other than the one that keeps on hooking me up with those people in the overseas who are answering the phone only to sympathize with & apologize to me but can only issue a false hope with the SRO#. More than once I was given the promise that the supervisor would call me back within an hour or two but I ended up calling back after I had been left hanging in the air all night long.) where I can talk to someone like I did with Charlie last time who can truly carry out the promise, I would truly appreciate it, patkosanke. ^^
    Thanks
    jcinlovewpalmTX
    Post relates to: Palm TX
    Post relates to: Palm TX
    Message Edited by jcinlovewpalmTX on 03-05-2009 06:36 PM
    Message Edited by jcinlovewpalmTX on 03-05-2009 06:36 PM

  • PM - Collective in process again for Notification

    hi,
    i need to in process again(recomplete) for notification. but i have a many notification and is that possible to collective in process again for all of them?

    Its not possible to do "Put in Process again" for the closed notifications in mass.
    You have to try LSMW or SAP GUI script for that.

  • Notification set in process again at defect recording

    Hi all,
    In customizing, my inspection type is defined as "one Q-notification by inspection lot".  The linked notification type is A1.
    I created an inspection lot.  I created a notification of type B1 with QM01 link to this inspection lot (QMEL-PRUEFLOS).  This B1 notification is already closed.
    When I record an defect in QE51N for this inspection lot, a new A1 notification is created BUT the closed B1 notification is set in process again.
    Is there a way to avoid this kind of behavior ?  I just want to create a new A1 notification without reopening the closed one.  Eventually just reopen existing A1 which are already closed but not other type of notifications.
    Thanks in advance

    Hello Sebastien,
    "one Q-notification by inspection lot" applies to Inspection lot only irrespective of Notification type and it will set other notifications in-process if you record new defects.
    In your case i guess both A1 and B1 are customized notification types. And in B1 notification you have incorporated "inspection lot" field by using some Exit.
    When you create manual notification B1 using QM01, you enter Inspection lot number and it hits Table QMEL. Now when you record defects and create notification A1 system gets another Notification with the same inspection lot number and puts it In-Process.
    Now if you consider standard notification types F2, Q2; When you go for QM01, you can not maintain Inspection lot number in Q2 notification, but for F2 (Automatically) system copies inspection lot number into notification. And as it does not get any other entry in QMEL there is no effect on Q2 notification created earlier.
    Experiment on user Exit QQMA0030  Check validity of status change; and see if you can restrict putting notification in-process if Notification type is Not Same. 
    Amol.

  • Will iTunes restore feature force me to go through the setup/activation process again on my iPhone 3GS?

    Will iTunes restore feature force me to go through the setup/activation process again on my iPhone 3GS?
    I don't have internet at current location so this would be a huge issue as obviously I wouldn't be able to get past the connect to wifi/itunes step.

    I haven't tried because if it fails I have no phone, which would be even worst.
    I'm still trying to figure out whos brilliant idea it was to only allow wifi or itunes when you pay for 3G on the phone lol you'd think there would be an option to use it

  • HT204406 I turned on iTunes Match 8 days ago, but all it does it restart the syncing process again half way through - any ideas?

    So, 8 days ago we decided to subscribe to iTunes Match.  It's been trying to sync ever since (i.e. it gets half way through step 2 and then restarts the whole process again).  Any idea as to why it's doing this?  Any ideas as to what we can do to fix this?

    sounds like you may just want to re-match your library.
    easiest way to do so if it never finished it to turn iTunes match off, then back on (and add this computer). that will analyze your library once more and upload or match any songs that need to be.
    Store > Turn off iTunes Match
    then
    Store > Turn on iTunes Match

  • IPhone stuck on connect to iTunes screen do not use iTunes or have it installed on my PCs; does anyone know of an easy fix other than updating windows then installing iTunes?  I don't have time to go through the process again and at this point will d

    Hi all- I'm new to this online community of Apple support; my iPhone 5s is stuck on a screen that has the connect to iTunes icon, this started after I upgraded to IOS 8.1.1 from the beta to fixed version; I don't use iTunes and have an IPad, home PC, office PC, and Galaxy Tab, and I went through (failed) the process of installing itunes on my office PC but needed to update windows; after going through all redommendations I could find, including Apple phone support, I still haven't had success.  Does anyone know a way to get my phone past that screen?  I don't have time to keep doing updates and installation attempts;'I don't care about the content at this point; but I can't get to the settings to "reset all" and start from scratch; I bought i loud for storage and have an old 4s that has a broken screen butt still works and I have another active 4s on my plaN.  Im not tech savvy myself; but I know some community members are pure geniuses! !I just need a fast way to fix this bug;'I use it for work and it's been inaccessible all week, the only time I have to go to an Apple Store is this weekend; I don't want to move to the iphone6 because it's too big.  I didn't know this community existed; it's cool; for this issue, I just have no time for a new phone or phone support again; I'm posting this question as a last resort; any feedback is appreciated......and I apolo in advance if this post goes under the wrong thread

    No. You have no alternative but to plug it into a computer running iTunes and restore it.

  • Garageband downlods but everytime i open it it start the download process again

    I bought my imac which had garageband preloaded i had problems with lops so i uninstalled it and bought i fresh copy from itunes as result every time the download finishes i open garageband and it keep restarting the download over and over again any suggestions would be appreciated thank you

    I bought my imac which had garageband preloaded i had problems with lops so i uninstalled it and bought i fresh copy from itunes
    Do you mean "bought from AppStore"? After uninstalling you should have been able to download from the AppStore for free?
    Anyway. GarageBand seems to have a problem to remember, that it has installed the additional contents. Perhaps it cannot write the Preferences file. HangTime's "oddball" fix may help:
    After GarageBand has completed downloading and installing all of it's extras, remove the GarageBand preferences file and relaunch GarageBand. 
    Go to the Finder's menu bar:
    Select Go ->     and hold down the ⌥-key, until you see "Library" and double click it.
    Open the folder : ~/Library/Preferences
    Locate the com.apple.garageband.plist file
    Move it to your desktop.
    Relaunch GarageBand.
    If still loops are missing, rebuild the loop index: Rebuilding the Loop Index in GarageBand
    Regards
    Léonie

Maybe you are looking for