Mesh Profile
L.s.
Why is there a undeletable Mesh template on my controllers?
since upgrade to latest version of WCS and controller-SW (3750+wlc) (wism) i have on 2 of my controllers a mesh tmpl.
when i try to remove wcs tells me that's not possible.
tried to do it directly on the controller, but off-course that's not possible.
when i see clients trying to connect to 802.11b wlans there is a "Mesh_Profile" which i didn't create.
Any lights?
Regards Frans Verschoor
Hi Frans,
the reason that you might be seeing a standard mesh template is for the 1500 series mesh AP's. Cisco have built in a few future feature into the software of which some do nothing. (Page 9 for "new mesh features" of the software release notes) also For example in the latest version version 4.1.171.0 of the controller it now references 802.11n access points. (Cisco statement page 9 - 802.11n radios are not supported for use with controller software release 4.1.171.0. These radios will be supported in a future controller release. In this release, please disregard any 802.11n-related parameters
that appear on the controller GUI pages and any 802.11n-related controller CLI commands.)
Hope that helps
Cheers Mark
*Pls rate all usefull posts
Similar Messages
-
Hello. I'm an Illustrator novice, as you will be able to tell from my question. I'm somewhat familiar with the gradient mesh tool as well as the raster effects that Illustrator CS3 offers, but I can't figure out how to use them to do what I have to do.
Here's my situation. I'm creating a logo design. It is a musical note with a flame coming off of it. I want to add the appearance of the shape having shadows (yellow for the light areas, and red for the shadowed areas).
I can't get the gradient mesh tool to work because I'm assuming the shape is too complex. I understand that I could probably just create a bunch of different gradient mesh areas and just try to mesh them together, but is this necessary? ...and is chopping my shape into mulitple sections really the best method ? (it sure doesn't seem like the logical solution).
Then I tried using Illustrators blur effects. I'm concerned to even use them for a logo design, because the "blur" effect is raster, and with a logo; it's probably not wise to use anything raster, correct? Anyway...i can't get it to work. I created a shape using the pen tool to replicate the shape of the shadow. When i blur it, the blur is visable outside the original logo shape. I don't know how to make it stop at the path edge. Does anyone know how?
If anyone can please help me here, I would be more than grateful. I realize these questions probably stupid ones, but I just can't seem to figure out how to do this, despite reading tutorials and watching numerous youtube videos on the gradient mesh tool; I can't seem to figure out how to adapt it to my situation.
Here is the image I created in Photoshop. I am trying to duplicate it in Illustrator CS3.
[URL=http://img515.imageshack.us/my.php?image=surefiremusicnote.jpg][IMG]http://img515.ima geshack.us/img515/9348/surefiremusicnote.jpg[/IMG][/URL]Thanks Steve and Jet. I've spent the lasts 2 hours calling around to different print shops in hope that I can maybe trade labor for insight into their printing process. Problem is there seems to be a lack of 4 color offset printing companies who also offer spot colors. I really wish I had the money to take a class, but when I do, I will. I just contacted a few freelance designers who seem to have a lot of print work in their portfolios. Maybe they can teach me a thing or two, and in return I can drop them a few bucks or help them with something.
Jet, you've got me very concerned here. What do you mean by "It's not just a matter of selecting colors; it's also a matter of selecting the number of inks necessary to render them in the various reproduction methods in which the mark will be used"? Are you just stating the importance in using swatch books (Pantone)?
You mention the importance of a design being rendered in different forms (apparel, signs, promotional items..). So how should I go about doing this? Lets say a client wants a "mark" printed on all of the things you stated. Is it my duty to find out what printer they will be using before I submit design files to them? Is it the job of the designer to contact the print shop and get their profiles for different prints (glossy paper prints, matte paper prints, t-shirt printing, vehicle graphic printing)? This is all very time consuming, so should there not be extra charges when dealing with setting up different print settings for particular print jobs?
I've read the blogs of some successful logo designers. David Airey for example just submits his logo design to his client in eps form I believe (plus any requests). Should he be submitting a separate file for each intended use, or is this the job of the client and printer to work out?
You've got me extremely worried that I am going to really deal someone a bad hand here. As far as I know, this hasn't happened yet; but I'm glad you have me concerned. The sad part is that I do have a 2 year degree in graphic design and I didn't learn one thing about printing and it's association with color. The little I have learned is from the internet. I've checked out Amazon(dot)com for a good book on learning about color and print, but there seems to be a lack of recently written books (with reviews) regarding the subject. Can you recommend any?
I started doing freelance work because people would ask me to design a t-shirt for them, or a flyer for their small business. So I did. Now I have more people requesting my services. It's hard to turn down the money, especially in these times. But at the same time, I don't want to cause major headaches for anyone either. Until recently, I had no idea the complexity of the design to print process. Just 3 days ago, I purchased a monitor calibration device and my first set of Pantone guides. They should arrive shortly. I know, don't laugh.
My lack of knowledge regarding this whole thing has really got me questioning what I am doing. I figured all i really needed to know in Illustrator was to use the pen tool, since my use of Illustrator has been strictly for shaping logos.
There are just so many questions I have, and all can't be answered through a google search. I really don't like wasting your time with my ignorance, but I do appreciate your assistance. It takes some time for my little brain to absorb all of this, but I have been reading all I can from the endless tutorials and forum discussions available on the web. The problem I've found is that alongside the large amount of great info on the web, there is seemingly an equal amount of contradictory or partially inaccurate info as well. which only confuses me more. For example, most people say to design in cmyk for print (300dpi higher or vector). A rep from Pantone told me to create my designs using Pantones color swatch groups. Why would I want to start in Pantone? Don't all of their colors cost extra money (spot colors require a new printer plate and ink to be set up). Starting in cmyk seems like a more logical approach. Is he just trying to sell me Pantone?
Sorry for my redundant question regarding the concern for non-single colored paths not being able to join. You obviously answered my question with your example.
For your time, I would like to show my appreciation. If you wouldn't' mind leaving your paypal address, I can send ya a couple/few bucks. Books are great, but they can't answer all questions. Forums like this one are really very helpful and a great learning tool. I do realize I have to continue educating myself as much as possible. I'm not going to give up, that's for sure.
So, do you work for Adobe, or are you a graphic designer? Do you have a website with tutorials or a book I can buy lol?
It would be great to be able to see a walkthrough in the design process of a successful designer and the proper methods of designing for different forms of print. -
Projecting an image with the wrong display profile
I've just spent three hours with a friend and his projector/laptop. He uses it to display images at a photography club, and recently he's had trouble getting a satisfactory projection, with display size and colour rendition.
The laptop is a MESH 1366x768 running Windows 7 and CS4, the projector was a Canon SX80 1400x1050. They were connected by VGA.
1, as the projector and laptop monitor were different native resulutions, I established that the Windows needed to be set to external-only for the desktop to assume the projector's dimensions.
2, I noticed that he'd calibrated the laptop's display, so I made sure that Display 1 (LCD) was using the Spyder profile, and Display 2 (SX80) was using sRGB.
3, I set the projector to sRGB mode and zeroed all its adjustments.
The colours were awful, and no amount of projector adjustment helped much. Eventually, I tried a bunch of sRGB images in the projector's USB port, and I realised that the zeroed state was actually pretty good - so it turned out that the laptop was the problem.
I took a flyer, and ditched the laptop display profile, replacing it with sRGB. Bingo! The projector's VGA display was now very similar to the USB display.
I put the calibrated profile back on "Display 1", as a sanity check, and confirmed this was the problem (and, before you ask, yes I restarted the applications each time I changed the CM settings).
So, the question is: what the heck is happening here? Is Windows 7 delivering the wrong profile to CM Adobe software, or is Adobe only looking for the primary display profile? Am I missing something?
Thanks for any insights, and restoration of my sanity.From what I've read, some display drivers don't allow the distinction of using different profiles for multiple displays. Someone no doubt took a shortcut somewhere and assumed there would/could only be one display. Given that the laptop in some modes can share the very same display with the VGA port, this isn't that surprising.
I don't know whether this is something that might have been corrected, but whether a newer driver has been released for that laptop might be something to check into.
Laptop display drivers are typically not available from the chipset manufacturer, but rather the laptop maker, and traditionally in general they don't do all that good a job keeping up with technology, so there may well not be a driver update available.
-Noel -
I have a problem when opening a profile on Facebook. when I open the main page and facebook all ok but when I try to open your Firefox profile my block! what the problem ????? before me it was happening but now when I installed Firefox 4
WiFi signals get stronger the closer the machine is to the router and the less interference/blocking of the signal like via walls with metal in them or of thick concrete.
Since the signal emanates outwards in a sphere, your supposed to place the wireless router in a central location in the building so it covers all areas.
The power of the router also has a affect, if your router is old or something not that powerful like a Airport Express, it doesn't have the ability to filter out other signals or enough punch to get through walls etc. or cover a large area as effectively.
If you buy/have a powerful router of newer make and have issues where there is metal in the walls or thick concrete, then you can buy something like OpenMesh and by using Ethernet cables from the back of the router, extend the WiFi signal into other rooms and areas past the blockage.
https://www.open-mesh.com/ -
Wireless Mesh topology parent child optimization. How do you force a reconfig?
Release 6 controller
9 Mesh APs. 1524 (2x 5G radios, 1x 2.4G) and 1522 (1x 5G radios, 1x 2.4G)
Designed for 3 linear hops and then a split to the rest.
AP1 = Root AP
linear to
AP2
Linear to
AP3
Linear to
AP4
equidistant to
AP5 and AP6
The rest are further away from AP4, but have visibility back to AP 4
The issue is after an event (say a power outage) at AP4.
AP5 uses AP3 as it's parent.
That's okay during the power failure, but when AP4 comes back up, I want to force AP5 to switch it's parent to AP4.
You may ask why, if AP5 can reach AP3 okay, it's okay to leave it that way.
Well, doing link tests...
test --------packet loss %-----
speed AP3toAP5 AP3toAP4 AP5-AP4
===== ======= ======= =======
54M 100 0 0
48M 100 0 0
36M 52.6 0 0
24M 1.44 0 0
18M 0.89 0 0
So you can see it's desireable now that AP5 uses AP4 as it's parent.
Over time, the system might figure it out, but our limited experience shows it seems to stick to the way it is.
To complicate matters, sometimes we've found that it doesn't seem to reconfigure when the channel number has changed so AP5 can reach AP3, but AP4 (1524) comes up with a different channel on it's downlink radio.
So, how can we force a mesh topology reevaluation/change for either 1 AP or the whole bridge group?
I thought changing the bridge speed from "auto" to 54M (on AP3 above, for example) might force the attached children to rethink it, but it didn't seem to work (maybe I needed to wait an hour?).
I also thought tweaks to "Radio Performance Profile" for radio might help. (not sure what to change, or how long to wait for a result)
suggestions on how to quickly reconverge?
reseting APs and hoping they come back in a better topology is painful and slow.
Thanks - GlenGlen, I know this is a very old topic but we are suffering from similar conditions on our end. Even using directional antennas we are having a difficult time having the Mesh network consistently optimize itself. Did you guys ever find a tweak that worked for you to have the system re-evaluate the connection by packet loss on speed?
Thanks! -
Mesh Access Poits Disappearing
Hi.
We have installed 20 mesh access points (x16=1522AG, 1131AG) controlled by 4402 Wireless LAN Controller (WLC) version 5.2. The network is currently up and running. The problem is that some access points disappear from the controller and then reappear. I captured some message logs in the WLC shown below:
5 Fri Feb 19 11:55:53 2010 Mesh child node '00:26:0a:39:65:0f' is no longer associated with mesh node '00:26:0a:38:6e:00'.
6 Fri Feb 19 11:55:46 2010 Interference Profile Updated to Pass for Base Radio MAC: 00:26:0a:38:5b:00 and slotNo: 0
7 Fri Feb 19 11:55:29 2010 AP Disassociated. Base Radio MAC:00:26:0a:39:65:00
8 Fri Feb 19 11:55:29 2010 AP's Interface:1(802.11a) Operation State Down: Base Radio MAC:00:26:0a:39:65:00 Cause=Heartbeat Timeout
9 Fri Feb 19 11:55:29 2010 AP's Interface:0(802.11b) Operation State Down: Base Radio MAC:00:26:0a:39:65:00 Cause=Heartbeat Timeout
The Mesh access point above is a Mesh Access Point (MAP).
Someone pliz explain the logs or the intermittent disappearance of the Access Points.Hi,
I believe this is correct.
The Cisco Wireless LAN Controller Configuration Guide, Release 5.2 states the following:
Controller software release 5.2 supports these Cisco Aironet mesh access points:
• Cisco Aironet 1520 series outdoor mesh access points – Cisco 1520 Series consists of the 1522 dual-radio mesh access point and the 1524 multi-radio
mesh access point.
• Cisco Aironet 1130AG and 1240AG series indoor mesh access points
The setup is already working and users are able to connect to the internet etc. Only that some mesh access points keep disappearing...but not for long periods of time. -
3D Surface Plot - Profil visualisieren
Hallo liebe Community!
Ich habe ein Problem, und zwar habe ich 40 Messwerte und zu jedem Messwert die dazugehörige x und y - Position! Nun möchte ich daraus ein (graphisches) (Strahl-) Profil erstellen, ich habe es schon mit einigen Funktionen versucht, unter anderem mit dem 3D-Surface, aber meine Punkte werden mit wild aussehenden geraden Flächen interpoliert
,.... wie schaffe ich es, ein richtiges Strahlprofil daraus zu erhalten?
Mein jetziger Code sieht so aus, ich habe eine Matrix für die x und y Positionen und ein Array der gleichen Dimension für meine (noch willkürlichen) Messwerte.... habe es wie man sieht sowohl mit Surface als auch mit Mesh versucht aber ich komme auf keine zufriedenstellenden Ergebnisse...
vielleicht hat ja jemand einen Tipp für mich, ich bin schon ein ganzes Weilchen am Suchen....
Liebe Grüßeattach your VI. Code pictures are pretty useless.
LabVIEW Champion . Do more with less code and in less time . -
Hi,
I m using one 1522 AP as a RAP and one 1522 AP as a MAP.Also there are four 1242 RAP Aps.1522 AP could find its 1522 RAP earlier before connecting 1242 RAPs in network but after connecting 1242 RAP APs the mesh 1522 AP disappars after few menutes of joining to RAP 1522.
plase help.
output of 'debug mesh security events enable' is show below
(Cisco Controller) >debug mesh security events enable
(Cisco Controller) >Fri May 29 12:31:17 2009: 00:22:BE:43:4E:00 MESH_ASSOC_REQU
EST_PAYLOAD in Association Request for AP 00:22:BE:42:0B:00
Fri May 29 12:31:17 2009: 00:22:BE:43:4E:00 Mesh assoc request for known AP 00:
22:be:42:0b:00
Fri May 29 12:31:17 2009: 00:22:BE:43:4E:00 Mesh assoc request :child : 00:22:b
e:42:0b:00 NextHop : 00:22:be:43:4e:00 LradIp 10.7.51.74 vlanid: 0 mwarPort:
12223 lradPort: 13536
Fri May 29 12:31:17 2009: Sending PMK Delete request to other MDID members for A
P(mscb)00:22:be:42:0b:00
Fri May 29 12:31:17 2009: MAC Validation of Mesh Assoc Request for00:22:be:42:0b
:00 is 0, Mode is : 0
Fri May 29 12:31:17 2009: Starting dot1x authentication for : 00:22:be:42:0b:00
Fri May 29 12:31:18 2009: Got the following AAA key message for : 00:22:be:42:0b
:00
Fri May 29 12:31:18 2009: Control Msg Hex Dump:
93 BC A8 97 57 2C 6B 82
0B EC 4F A
9 61 62 70 A2
F7 0F 5B 4F A3 68 4D 11
46 C9 12 F0 49 6F E1 6F
Fri May 29 12:31:18 2009: Parent Nonce for : 00:22:be:42:0b:00
Fri May 29 12:31:18 2009: Key Hex Dump:
E2 D1 11 C6 79 FE 35 DD
F6 A6 0D 19 94 F7
C0 79
50 C3 80 AC B0 88 C7 62
2B 76 87 DF E0 F6 DF AA
Fri May 29 12:31:18 2009: PMK-R0 Key for : 00:22:be:42:0b:00
Fri May 29 12:31:18 2009: NASID WLC1-T MGID: 00:00:00:00:00:00:00:00
Fri May 29 12:31:18 2009: Key Hex Dump:
03 95 21 5D 5A C0 26 7B
E6 02 DD 0D 09 F2
06 95
EB 9D CE 57 B0 76 92 51
1C 68 D6 E2 52 29 A3 44
Fri May 29 12:31:18 2009: PMK-R0 Name for : 00:22:be:42:0b:00
Fri May 29 12:31:18 2009: Key Hex Dump:
B7 56 31 49 88 AC C2 5C
E7 85 98 56 E4 A6
A4 24
Fri May 29 12:31:18 2009: PMK-R1 Key for : 00:22:be:42:0b:00
Fri May 29 12:31:18 2009: Key Hex Dump:
18 34 4B A1 52 86 58 FA
5E 59 75 F7 BA 0B
37 34
96 C3 FE 6E 13 24 11 88
1C 56 B3 19 B3 34 AD 47
Fri May 29 12:31:18 2009: Sending the following key for : 00:22:be:42:0b:00
Fri May 29 12:31:18 2009: Control Msg Hex Dump:
18 34 4B A1 52 86 58 FA
5E 59 75 F
7 BA 0B 37 34
96 C3 FE 6E 13 24 11 88
1C 56 B3 19 B3 34 AD 47
Fri May 29 12:31:18 2009: Processing of Mesh key response success from AP00:22:b
e:43:4e:00
and i can't see any output from 'debug lwapp events enable' for 30 min.4.WLC configuration:
(Cisco Controller) >show running-config
802.11a cac voice tspec-inactivity-timeout ignore
802.11a cac voice stream-size 84000 max-streams 2
802.11a channel global off
802.11a rate supported 12
802.11a rate supported 24
802.11b cac voice tspec-inactivity-timeout ignore
802.11b cac voice stream-size 84000 max-streams 2
802.11b channel global off
advanced 802.11a channel add 165
advanced 802.11a profile coverage global 15
advanced 802.11a profile foreign global 60
advanced 802.11a profile level global 12
advanced 802.11b profile foreign global 60
advanced 802.11b profile clients global 15
advanced 802.11b profile level global 12
advanced 802.11b profile coverage global 15
advanced location expiry tags 1200
advanced location expiry client 150
advanced location expiry calibrating-client 30
advanced location expiry rogue-aps 1200
Cisco Public Safety is not allowed to set in this domain
auth-list ap-policy ssc enable
auth-list add mic 00:22:be:41:e3:00
auth-list add mic 00:22:be:42:0b:00
auth-list add mic 00:22:be:43:4e:00
auth-list add mic 00:23:5e:03:b2:14
auth-list add mic 00:23:5e:03:b2:c6
country IN
dhcp create-scope DHCP Scope
dhcp create-scope Electronic Shop
dhcp address-pool DHCP Scope 10.7.51.12 10.7.51.254
dhcp address-pool Electronic Shop 10.7.24.240 10.7.24.250
dhcp default-router DHCP Scope 10.7.51.1
dhcp default-router Electronic Shop 10.7.24.1
dhcp enable DHCP Scope
dhcp enable Electronic Shop
dhcp dns-servers DHCP Scope 10.7.24.2 172.16.7.86
dhcp dns-servers Electronic Shop 10.7.24.2 172.16.7.86
dhcp domain DHCP Scope lthed.com
dhcp domain Electronic Shop lthed.com
dhcp network DHCP Scope 10.7.51.0 255.255.255.0
dhcp network Electronic Shop 10.7.24.0 255.255.255.0
interface address ap-manager 10.7.51.11 255.255.255.0 10.7.51.1
interface address management 10.7.51.10 255.255.255.0 10.7.51.1
interface address service-port 192.168.1.1 255.255.255.0
interface address virtual 1.1.1.1
interface dhcp ap-manager primary 10.7.51.10
interface dhcp management primary 10.7.51.10
interface dhcp service-port disable
interface port ap-manager 1
interface port management 1
known ap add 00:30:5b:02:3b:9f
load-balancing window 5
wlan apgroup add EleShop Electronic Shop
logging buffered 2
macfilter add 00:0e:35:90:ee:85 0 management U1
macfilter add 00:17:23:06:54:54 0 management U2
macfilter add 00:17:23:06:59:4d 0 management U3
mesh client-access enable
mesh security rad-mac-filter disable
mesh security eap
mgmtuser add admin **** read-write
mobility group domain Mobility
mobility group member add 00:23:33:b2:c3:c0 172.16.5.1 Mobility
msglog level critical
network telnet enable
network broadcast enable
network mgmt-via-wireless enable
network fast-ssid-change enable
network rf-network-name none
radius auth add 1 172.16.7.12 1812 ascii ****
radius auth rfc3576 enable 1
radius auth retransmit-timeout 1 5
snmp version v2c enable
snmp version v3 enable
snmp trapreceiver create WCS 10.7.24.39
snmp trapreceiver mode enable WCS
syslog 172.16.7.12
sysname WLC1-T
trapflags 802.11-Security wepDecryptError disable
trapflags rrm-profile load disable
trapflags rrm-params tx-power disable
trapflags rogueap disable
wlan create 1 LTAIT LTAIT
wlan mac-filtering enable 1
wlan session-timeout 1 1800
wlan session-timeout 2 disable
wlan wmm allow 1
wlan wmm allow 2
wlan radius_server auth add 1 1
wlan radius_server acct disable 2
wlan security static-wep-key encryption 1 104 1
wlan security wpa disable 2
wlan security wpa wpa1 enable 1
wlan security wpa wpa1 ciphers tkip enable 1
wlan security wpa wpa2 disable 1
wlan dhcp_server 1 0.0.0.0 required required
wlan dhcp_server 2 0.0.0.0 required required
wlan enable 1
wlan enable 2 -
Hello friends! I am kicking myself because I cann't find the route of my problem so hopefully somebody can! I have two Cisco 1510 Mesh Access points one is the root. I am working with a Motorola VC70 Windows CE 7.0 unit. The problem that I am having is that everytime the unit roams from the root to the mesh it drops connection. I was doing a debug on the mesh AP and it was saying that "drop frame, sta sent the frame on wrong vapid" when the unit was trying to roam. Does anybody knows what this means? I am working with one SSID (WPA2-PSK) and I have the client on the 2.4ghz channel, channel 11 for the root and 1 for the mesh, and the 5ghz is working as the backhaul on bith channel 161. Any ideas to point me in the correct direction would help!!!
Thanks,
JasonWhen I do a debug on the client and when the unit roams from the working AP to the Mesh the debug stops ( I am doing this from a 2106 Controller). But when the Client roams back to the working AP it shows this. Which I assume is a successful roam. Any other client does the same, Laptop with Intel card, Motorola MC9090 Handheld. It looks like it fully disassociates and looks for its IP? The coverage is very good between the root and the Mesh AP. RSSI is at -42 and both interfaces pass the noise interferance profile. For the coverage that is needed we are using omni antennas and a site survey for the area is around -52 to -66.
(Cisco Controller) >Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 Reassociation re
ceived from mobile on AP 00:0b:85:89:f0:50
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 STA - rates (4): 130 132 139 150 12
18 24 36 48 72 96 108 0 0 0 0
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 STA - rates (12): 130 132 139 150 12
18 24 36 48 72 96 108 0 0 0 0
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 Processing RSN IE type 48, length 20
for mobile 40:83:de:16:f3:81
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 10.2.42.107 RUN (20) Deleted mobile
LWAPP rule on AP [00:0b:85:8f:ad:c0]
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 Updated location for station old AP
00:00:00:00:00:00-0, new AP 00:0b:85:89:f0:50-1
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 10.2.42.107 RUN (20) Change state to
START (0) last state RUN (20)
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 10.2.42.107 START (0) Initializing p
olicy
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 10.2.42.107 START (0) Change state t
o AUTHCHECK (2) last state RUN (20)
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 10.2.42.107 AUTHCHECK (2) Change sta
te to 8021X_REQD (3) last state RUN (20)
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 10.2.42.107 8021X_REQD (3) Plumbed m
obile LWAPP rule on AP 00:0b:85:89:f0:50
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 apfPemAddUser2 (apf_policy.c:212) Ch
anging state for mobile 40:83:de:16:f3:81 on AP 00:0b:85:89:f0:50 from Associate
d to Associated
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 Stopping deletion of Mobile Station:
(callerId: 48)
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 Sending Assoc Response to station on
BSSID 00:0b:85:89:f0:50 (status 0)
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 apfProcessAssocReq (apf_80211.c:3888
) Changing state for mobile 40:83:de:16:f3:81 on AP 00:0b:85:89:f0:50 from Assoc
iated to Associated
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 Creating a PKC PMKID Cache entry for
station 40:83:de:16:f3:81 (RSN 2)
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 Adding BSSID 00:0b:85:89:f0:5f to PM
KID cache for station 40:83:de:16:f3:81
Mon Sep 9 12:15:33 2013: New PMKID: (16)
Mon Sep 9 12:15:33 2013: [0000] 53 e6 21 d4 9b a1 a9 cc 5c ed 86 a9 71 00
59 b7
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 Initiating RSN PSK to mobile 40:83:d
e:16:f3:81
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 dot1x - moving mobile 40:83:de:16:f3
:81 into Force Auth state
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 Skipping EAP-Success to mobile 40:83
:de:16:f3:81
Mon Sep 9 12:15:33 2013: Including PMKID in M1 (16)
Mon Sep 9 12:15:33 2013: [0000] 53 e6 21 d4 9b a1 a9 cc 5c ed 86 a9 71 00
59 b7
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 Sending EAPOL-Key Message to mobile
40:83:de:16:f3:81
state INITPMK (message 1), replay counter 00.00.00.00.00.00.
00.00
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 10.2.42.107 Removed NPU entry.
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 Received EAPOL-Key from mobile 40:83
:de:16:f3:81
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 Ignoring invalid EAPOL version (1) i
n EAPOL-key message from mobile 40:83:de:16:f3:81
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 Received EAPOL-key in PKT_START stat
e (message 2) from mobile 40:83:de:16:f3:81
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 Stopping retransmission timer for mo
bile 40:83:de:16:f3:81
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 Sending EAPOL-Key Message to mobile
40:83:de:16:f3:81
state PTKINITNEGOTIATING (message 3), replay counter 00.00.0
0.00.00.00.00.01
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 Received EAPOL-Key from mobile 40:83
:de:16:f3:81
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 Ignoring invalid EAPOL version (1) i
n EAPOL-key message from mobile 40:83:de:16:f3:81
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 Received EAPOL-key in PTKINITNEGOTIA
TING state (message 4) from mobile 40:83:de:16:f3:81
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 10.2.42.107 8021X_REQD (3) Change st
ate to L2AUTHCOMPLETE (4) last state RUN (20)
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 10.2.42.107 L2AUTHCOMPLETE (4) Plumb
ed mobile LWAPP rule on AP 00:0b:85:89:f0:50
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 10.2.42.107 L2AUTHCOMPLETE (4) Chang
e state to RUN (20) last state RUN (20)
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 10.2.42.107 RUN (20) Reached PLUMBFA
STPATH: from line 4373
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 10.2.42.107 RUN (20) Adding Fast Pat
h rule
type = Airespace AP Client
on AP 00:0b:85:89:f0:50, slot 1, interface = 1, QOS = 0
ACL Id = 255, Jumbo Frames = NO, 802.1P = 0, DSCP = 0, TokenID = 1506
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 10.2.42.107 RUN (20) Successfully pl
umbed mobile rule (ACL ID 255)
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 Stopping retransmission timer for mo
bile 40:83:de:16:f3:81
Mon Sep 9 12:15:33 2013: 40:83:de:16:f3:81 10.2.42.107 Added NPU entry of type
1 -
Is there a way to share purchased SW under mote than one profile on the MacBook pro?
ThanksIf the software is in the HD>Applications folder it's available to everyone. If for some reason you put software into User>Applications folder it will be available only to that user.
-
Logical Profiles in ISE 1.2.1
I´m having trouble understanding the Logical Profiles.
What I understand from the user guide: http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/user_guide/ise_user_guide/ise_prof_pol.html#58510
for those to lazy to read:
You can use the logical profile in an authorization policy condition to help create an overall network access policy for a category of profiles. You can create a simple condition for authorization, which can be included in the authorization rule. The attribute-value pair that you can use in the authorization condition is the logical profile (attribute) and the name of the logical profile (value), which can be found in the EndPoints systems dictionary.
so I thought that meant that I can group Different Profiles (Apple Iphone, Ipad, Ipod) together into a logical group e.g. "BYOD_Idevice" and use this logical profile in the Authorization.
But I can´t choose this freshly created Logical Group in the Authorization Condition. As for the fact, I can´t choose this logical group ANYWHERE.
Leaning back and thinking about it - it somehow makes sense. In the Authorization, you don´t pick Profiles, you choose Identity endpoints. So whats the point about the logical profiles? I was hoping to clean/lean up my authorization rules with them. But for what would I use them else?
Or is this a bug in ise 1.2.1? Not sure if I should call tac about this, or if I´m just not getting it :D
Thanks alot for your help!Nice username! :)
So yes, you are correct, the logical profiles would allow you to group different type of dynamically profiled devices and then reference that profile in your authorization rules. However, you won't see those logical profiles under the "Identity Group Details" section. You will need to leave that field blank. Instead, you need to look in the "second" condition box: expression > Endpoint > LogicalProfile
Hope this helps!
Thank you for rating helpful posts! -
I am having a serious issue with all my apps disappearing/not working- user profiles
i will list the things i have done in the past 24 hours, hopefully one of you knows what happened...thank you in advance
first off, my situation- was that i bought a macbook pro(about a year ago) with lion or snow leopord it is software 10.7.5 i dont know what the guy did but when he sent me the computer the username was off and so was the home folder, i changed the username with ease but the home folder stayed tbd and i couldnt figure out how to change it. well it finally got on my nerves enough from looking at it that i wanted to change it today that put me into the situation i am in. Here is what i have changed:
-I added a second profile as to see if i could change the home emblem file named tbd to what i wanted. This worked or so i thought.
- then shared and permissions showed tbd(me) so i wanted to change that also so i went into systempreferences>users and groups>login options>network account server and clicked join/open directory utility. this is where i believe i went wrong i read in a forum that this is what you needed to change to make it look how i wanted it to. under active directory it still had this guys name gtmb04_evan so i changed it to my name like the forum said, well his name is back up even though i changed it. and this is when everything stopped working.
symptoms: all my applications act like they are newly downloaded and make me set them up.
- my home screen is nothing like it was before, no apps are on the desktop and the bar along the bottom only has the basic ones
- i tried to take the second username off of administrater which made me restart my cp(all my stuff looked normal until this, but didnt work)
-my launchpad wasnt showing any apps they simply looked blank
- my firefox along with many other apps wouldnt even start prior to reseting and gave me a message with something like couldnt find or access user profile( i forget the entire message)
please please help me, i hate this right now and have no idea what to do, all my files are still under my name, that when i thought i changed tbd- it apparently just made a new folder under users which didnt show up until the restart, i do not have a time machine set up on this computer because i hated the lion setup and couldn't get it to operate correctlyi had one mac and spilt water on it, the motherboard fried so i had to buy a used one...being in school and all. it is a MC375lla
Model Name:
MacBook Pro
Model Identifier:
MacBookPro7,1
Processor Name:
Intel Core 2 Duo
Processor Speed:
2.66 GHz
Number of Processors:
1
Total Number of Cores:
2
L2 Cache:
3 MB
Memory:
8 GB
Bus Speed:
1.07 GHz
Boot ROM Version:
MBP71.0039.B0E
SMC Version (system):
1.62f7
Hardware UUID:
A802DE22-1E57-5509-93C5-27CEF01377B7
Sudden Motion Sensor:
State:
Enabled
i do not have a backup of it, so i am thinking about replacing my old hard drive from the water damaged into this one, not even sure if that would work, but it did not seem to be damaged, as i recovered all the files i wanted off of it to put onto this mbp
the previous owner didnt have it set to boot, they had all their settings left on it and tried to edit all the names on it, had a bunch of server info and printers etc crap on it. i do not believe he edited the terminal system though--he doesnt seem to terribly bright(if thats possible)
tbh i hate lion compared to the old one i had, this one has so many more issues-overheating,fan noise, cd dvd noise
if you need screenshots or data of anything else as away
[problem is i do not want to start from scratch if there is a chance of fixing it, this one did not come with disks or anything like my first. so i dont even know if i could, and how it sets now i am basically starting from scratch, because now all my apps are reset but working, i am hoping to get my data back somehow though, i lost all of my bookmarks and editing all my apps and setting again would be a pain -
I am trying to do profiling of an ear appln using Java 1.6, JVMTI and TPTP
Please view the link before hand: http://www.eclipse.org/forums/index.php/t/398099/
but while starting the server i am getting the following error:
A fatal error has been detected by the Java Runtime Environment:
# EXCEPTION_STACK_OVERFLOW (0xc00000fd) at pc=0x77232258, pid=6568, tid=7560
# JRE version: 6.0_18-b07
# Java VM: Java HotSpot(TM) Server VM (16.0-b13 mixed mode windows-x86 )
# Problematic frame:
# C [ntdll.dll+0x22258]
# If you would like to submit a bug report, please visit:
# The crash happened outside the Java Virtual Machine in native code.
# See problematic frame for where to report the bug.
Can anyone help me in fixing this
The log file contains as below:
# A fatal error has been detected by the Java Runtime Environment:
# EXCEPTION_STACK_OVERFLOW (0xc00000fd) at pc=0x77232258, pid=6568, tid=7560
# JRE version: 6.0_18-b07
# Java VM: Java HotSpot(TM) Server VM (16.0-b13 mixed mode windows-x86 )
# Problematic frame:
# C [ntdll.dll+0x22258]
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
# The crash happened outside the Java Virtual Machine in native code.
# See problematic frame for where to report the bug.
--------------- T H R E A D ---------------
Current thread (0x099d3800): JavaThread "main" [_thread_in_native, id=7560, stack(0x0a320000,0x0a360000)]
siginfo: ExceptionCode=0xc00000fd, ExceptionInformation=0x00000001 0x0a320ffc
Registers:
EAX=0x00000009, EBX=0x00000001, ECX=0x0ef02b40, EDX=0x0ef0739c
ESP=0x0a321000, EBP=0x0a32100c, ESI=0x02917df4, EDI=0x0291902c
EIP=0x77232258, EFLAGS=0x00010206
Top of Stack: (sp=0x0a321000)
0x0a321000: 0000003f 0291902c 0291902c 0a32101c
0x0a321010: 0290aba1 029195c0 0ef072e0 0a35d2a4
0x0a321020: 0290a0f9 00000009 0ef02b40 02907b36
0x0a321030: 0ef072e0 02904f00 0ef072e0 0ef04fe0
0x0a321040: 02904f11 00000001 0ef04fc0 02904f11
0x0a321050: 00000001 0ef03960 02904f11 00000001
0x0a321060: 0ef06020 02904f11 00000001 0ef025e0
0x0a321070: 02904f11 00000001 0ef051a0 02904f11
Instructions: (pc=0x77232258)
0x77232248: 00 90 90 90 90 90 90 90 8b ff 55 8b ec 83 ec 0c
0x77232258: 56 57 8b 7d 08 8d 77 04 8b c6 f0 0f ba 30 00 0f
Stack: [0x0a320000,0x0a360000], sp=0x0a321000, free space=40a320ae4k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
C [ntdll.dll+0x22258]
C [CGProf.dll+0xaba1]
Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
j org.jboss.seam.jsf.SeamApplicationFactory.getApplication()Ljavax/faces/application/Application;+19
j com.sun.faces.config.processor.AbstractConfigProcessor.getApplication()Ljavax/faces/application/Application;+29
j com.sun.faces.config.processor.ApplicationConfigProcessor.process([Lorg/w3c/dom/Document;)V+20
j com.sun.faces.config.processor.AbstractConfigProcessor.invokeNext([Lorg/w3c/dom/Document;)V+31
j com.sun.faces.config.processor.LifecycleConfigProcessor.process([Lorg/w3c/dom/Document;)V+194
j com.sun.faces.config.processor.AbstractConfigProcessor.invokeNext([Lorg/w3c/dom/Document;)V+31
j com.sun.faces.config.processor.FactoryConfigProcessor.process([Lorg/w3c/dom/Document;)V+134
j com.sun.faces.config.ConfigManager.initialize(Ljavax/servlet/ServletContext;)V+45
j com.sun.faces.config.ConfigureListener.contextInitialized(Ljavax/servlet/ServletContextEvent;)V+328
j org.apache.catalina.core.StandardContext.listenerStart()Z+434
j org.apache.catalina.core.StandardContext.start()V+1275
j org.jboss.web.tomcat.service.deployers.TomcatDeployment.performDeployInternal(Lorg/jboss/web/WebApplication;Ljava/lang/String;Ljava/lang/String;)V+999
j org.jboss.web.tomcat.service.deployers.TomcatDeployment.performDeploy(Lorg/jboss/web/WebApplication;Ljava/lang/String;)V+117
j org.jboss.web.deployers.AbstractWarDeployment.start(Lorg/jboss/deployers/structure/spi/DeploymentUnit;Lorg/jboss/metadata/web/jboss/JBossWebMetaData;)Lorg/jboss/web/WebApplication;+257
j org.jboss.web.deployers.WebModule.startModule()V+44
j org.jboss.web.deployers.WebModule.start()V+20
v ~StubRoutines::call_stub
j sun.reflect.NativeMethodAccessorImpl.invoke0(Ljava/lang/reflect/Method;Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+0
j sun.reflect.NativeMethodAccessorImpl.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+106
J sun.reflect.DelegatingMethodAccessorImpl.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;
j java.lang.reflect.Method.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+189
j org.jboss.mx.interceptor.ReflectedDispatcher.invoke(Lorg/jboss/mx/server/Invocation;)Ljava/lang/Object;+432
j org.jboss.mx.server.Invocation.dispatch()Ljava/lang/Object;+24
j org.jboss.mx.server.Invocation.invoke()Ljava/lang/Object;+29
j org.jboss.mx.server.AbstractMBeanInvoker.invoke(Ljava/lang/String;[Ljava/lang/Object;[Ljava/lang/String;)Ljava/lang/Object;+366
j org.jboss.mx.server.MBeanServerImpl.invoke(Ljavax/management/ObjectName;Ljava/lang/String;[Ljava/lang/Object;[Ljava/lang/String;)Ljava/lang/Object;+57
j org.jboss.system.microcontainer.ServiceProxy.invoke(Ljava/lang/Object;Ljava/lang/reflect/Method;[Ljava/lang/Object;)Ljava/lang/Object;+131
j $Proxy38.start()V+29
j org.jboss.system.microcontainer.StartStopLifecycleAction.installAction(Lorg/jboss/system/microcontainer/ServiceControllerContext;)V+25
j org.jboss.system.microcontainer.StartStopLifecycleAction.installAction(Lorg/jboss/dependency/spi/ControllerContext;)V+24
j org.jboss.dependency.plugins.action.SimpleControllerContextAction.simpleInstallAction(Lorg/jboss/dependency/spi/ControllerContext;)V+21
j org.jboss.dependency.plugins.action.AccessControllerContextAction.install(Lorg/jboss/dependency/spi/ControllerContext;)V+39
j org.jboss.dependency.plugins.AbstractControllerContextActions.install(Lorg/jboss/dependency/spi/ControllerContext;Lorg/jboss/dependency/spi/ControllerState;Lorg/jboss/dependency/spi/ControllerS¸ü1
Íø"+35
j org.jboss.dependency.plugins.AbstractControllerContext.install(Lorg/jboss/dependency/spi/ControllerState;Lorg/jboss/dependency/spi/ControllerState;)V+35
j org.jboss.system.microcontainer.ServiceControllerContext.install(Lorg/jboss/dependency/spi/ControllerState;Lorg/jboss/dependency/spi/ControllerState;)V+23
j org.jboss.dependency.plugins.AbstractController.install(Lorg/jboss/dependency/spi/ControllerContext;Lorg/jboss/dependency/spi/ControllerState;Lorg/jboss/dependency/spi/ControllerState;)V+41
j org.jboss.dependency.plugins.AbstractController.incrementState(Lorg/jboss/dependency/spi/ControllerContext;Z)Z+456
J org.jboss.dependency.plugins.AbstractController.resolveContexts(Lorg/jboss/dependency/spi/ControllerState;Lorg/jboss/dependency/spi/ControllerState;Z)Z
J org.jboss.dependency.plugins.AbstractController.resolveContexts(Z)V
j org.jboss.dependency.plugins.AbstractController.change(Lorg/jboss/dependency/spi/ControllerContext;Lorg/jboss/dependency/spi/ControllerState;Z)V+220
j org.jboss.dependency.plugins.AbstractController.change(Lorg/jboss/dependency/spi/ControllerContext;Lorg/jboss/dependency/spi/ControllerState;)V+59
j org.jboss.system.ServiceController.doChange(Lorg/jboss/kernel/spi/dependency/KernelController;Lorg/jboss/system/microcontainer/ServiceControllerContext;Lorg/jboss/dependency/spi/ControllerState¸ü1
Íø"wang/StriTü1
V+35
j org.jboss.system.ServiceController.start(Ljavax/management/ObjectName;)V+189
j org.jboss.system.deployers.ServiceDeployer.start(Lorg/jboss/system/ServiceContext;)V+27
j org.jboss.system.deployers.ServiceDeployer.deploy(Lorg/jboss/deployers/structure/spi/DeploymentUnit;Lorg/jboss/system/metadata/ServiceMetaData;)V+109
j org.jboss.system.deployers.ServiceDeployer.deploy(Lorg/jboss/deployers/structure/spi/DeploymentUnit;Ljava/lang/Object;)V+25
j org.jboss.deployers.spi.deployer.helpers.AbstractSimpleRealDeployer.internalDeploy(Lorg/jboss/deployers/structure/spi/DeploymentUnit;)V+37
j org.jboss.deployers.spi.deployer.helpers.AbstractRealDeployer.deploy(Lorg/jboss/deployers/structure/spi/DeploymentUnit;)V+21
j org.jboss.deployers.plugins.deployers.DeployerWrapper.deploy(Lorg/jboss/deployers/structure/spi/DeploymentUnit;)V+87
J org.jboss.deployers.plugins.deployers.DeployersImpl.doInstallParentFirst(Lorg/jboss/deployers/spi/deployer/Deployer;Lorg/jboss/deployers/structure/spi/DeploymentContext;)V
J org.jboss.deployers.plugins.deployers.DeployersImpl.doInstallParentFirst(Lorg/jboss/deployers/spi/deployer/Deployer;Lorg/jboss/deployers/structure/spi/DeploymentContext;)V
j org.jboss.deployers.plugins.deployers.DeployersImpl.install(Lorg/jboss/dependency/spi/ControllerContext;Lorg/jboss/dependency/spi/ControllerState;Lorg/jboss/dependency/spi/ControllerState;)V+147
j org.jboss.dependency.plugins.AbstractControllerContext.install(Lorg/jboss/dependency/spi/ControllerState;Lorg/jboss/dependency/spi/ControllerState;)V+35
j org.jboss.dependency.plugins.AbstractController.install(Lorg/jboss/dependency/spi/ControllerContext;Lorg/jboss/dependency/spi/ControllerState;Lorg/jboss/dependency/spi/ControllerState;)V+41
j org.jboss.dependency.plugins.AbstractController.incrementState(Lorg/jboss/dependency/spi/ControllerContext;Z)Z+456
J org.jboss.dependency.plugins.AbstractController.resolveContexts(Lorg/jboss/dependency/spi/ControllerState;Lorg/jboss/dependency/spi/ControllerState;Z)Z
J org.jboss.dependency.plugins.AbstractController.resolveContexts(Z)V
j org.jboss.dependency.plugins.AbstractController.change(Lorg/jboss/dependency/spi/ControllerContext;Lorg/jboss/dependency/spi/ControllerState;Z)V+220
j org.jboss.dependency.plugins.AbstractController.change(Lorg/jboss/dependency/spi/ControllerContext;Lorg/jboss/dependency/spi/ControllerState;)V+59
j org.jboss.deployers.plugins.deployers.DeployersImpl.process(Ljava/util/List;Ljava/util/List;)V+985
j org.jboss.deployers.plugins.main.MainDeployerImpl.process()V+279
j org.jboss.system.server.profileservice.repository.MainDeployerAdapter.process()V+23
j org.jboss.system.server.profileservice.repository.ProfileDeployAction.install(Lorg/jboss/profileservice/spi/Profile;)V+121
j org.jboss.system.server.profileservice.repository.AbstractProfileAction.install(Lorg/jboss/system/server/profileservice/repository/ProfileContext;)V+36
j org.jboss.system.server.profileservice.repository.AbstractProfileService.install(Lorg/jboss/dependency/spi/ControllerContext;Lorg/jboss/dependency/spi/ControllerState;Lorg/jboss/dependency/spi/¸ü1
Íø"werState;Tü+58
j org.jboss.dependency.plugins.AbstractControllerContext.install(Lorg/jboss/dependency/spi/ControllerState;Lorg/jboss/dependency/spi/ControllerState;)V+35
j org.jboss.dependency.plugins.AbstractController.install(Lorg/jboss/dependency/spi/ControllerContext;Lorg/jboss/dependency/spi/ControllerState;Lorg/jboss/dependency/spi/ControllerState;)V+41
j org.jboss.dependency.plugins.AbstractController.incrementState(Lorg/jboss/dependency/spi/ControllerContext;Z)Z+456
J org.jboss.dependency.plugins.AbstractController.resolveContexts(Lorg/jboss/dependency/spi/ControllerState;Lorg/jboss/dependency/spi/ControllerState;Z)Z
J org.jboss.dependency.plugins.AbstractController.resolveContexts(Z)V
j org.jboss.dependency.plugins.AbstractController.install(Lorg/jboss/dependency/spi/ControllerContext;Z)V+387
j org.jboss.dependency.plugins.AbstractController.install(Lorg/jboss/dependency/spi/ControllerContext;)V+87
j org.jboss.system.server.profileservice.repository.AbstractProfileService.registerProfile(Lorg/jboss/profileservice/spi/Profile;)V+177
j org.jboss.system.server.profileservice.ProfileServiceBootstrap.start(Lorg/jboss/bootstrap/spi/Server;)V+206
j org.jboss.bootstrap.AbstractServerImpl.start()V+298
j org.jboss.Main.boot([Ljava/lang/String;)V+503
j org.jboss.Main$1.run()V+33
j java.lang.Thread.run()V+39
v ~StubRoutines::call_stub
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
0x0bbb0400 JavaThread "IdleRemover" daemon [_thread_blocked, id=7548, stack(0x68a80000,0x68ac0000)]
0x0bbaf400 JavaThread "Timer-1" daemon [_thread_blocked, id=8528, stack(0x68900000,0x68940000)]
0x0bbadc00 JavaThread "Thread-49" daemon [_thread_blocked, id=6508, stack(0x68780000,0x687c0000)]
0x0bbad400 JavaThread "JCA PoolFiller" [_thread_blocked, id=6980, stack(0x68500000,0x68540000)]
0x0bbad000 JavaThread "HSQLDB Timer @ae5b0b" daemon [_thread_blocked, id=5348, stack(0x68480000,0x684c0000)]
0x0bbac800 JavaThread "DefaultQuartzScheduler_QuartzSchedulerThread" [_thread_blocked, id=4176, stack(0x67330000,0x67370000)]
0x0bbac400 JavaThread "DefaultQuartzScheduler_Worker-9" [_thread_blocked, id=5004, stack(0x672b0000,0x672f0000)]
0x0bbabc00 JavaThread "DefaultQuartzScheduler_Worker-8" [_thread_blocked, id=7108, stack(0x67230000,0x67270000)]
0x0bbab400 JavaThread "DefaultQuartzScheduler_Worker-7" [_thread_blocked, id=5604, stack(0x671b0000,0x671f0000)]
0x0bbab000 JavaThread "DefaultQuartzScheduler_Worker-6" [_thread_blocked, id=5060, stack(0x67130000,0x67170000)]
0x0bbaa800 JavaThread "DefaultQuartzScheduler_Worker-5" [_thread_blocked, id=7456, stack(0x670b0000,0x670f0000)]
0x0bbaa400 JavaThread "DefaultQuartzScheduler_Worker-4" [_thread_blocked, id=3136, stack(0x67030000,0x67070000)]
0x0bba9c00 JavaThread "DefaultQuartzScheduler_Worker-3" [_thread_blocked, id=1452, stack(0x66fb0000,0x66ff0000)]
0x0bba9800 JavaThread "DefaultQuartzScheduler_Worker-2" [_thread_blocked, id=8036, stack(0x66f30000,0x66f70000)]
0x0cb3a800 JavaThread "DefaultQuartzScheduler_Worker-1" [_thread_blocked, id=6900, stack(0x66eb0000,0x66ef0000)]
0x0cb3ac00 JavaThread "DefaultQuartzScheduler_Worker-0" [_thread_blocked, id=4888, stack(0x66b00000,0x66b40000)]
0x0cb3c000 JavaThread "WorkManager(2)-1" daemon [_thread_blocked, id=5656, stack(0x66a80000,0x66ac0000)]
0x0cb3b400 JavaThread "AOPListner" daemon [_thread_blocked, id=1968, stack(0x65ee0000,0x65f20000)]
0x0cb3b800 JavaThread "ContainerBackgroundProcessor[StandardEngine[jboss.web]]" daemon [_thread_blocked, id=7868, stack(0x66770000,0x667b0000)]
0x0cb3d000 JavaThread "RMI TCP Accept-11006" daemon [_thread_in_native, id=4756, stack(0x665f0000,0x66630000)]
0x0cb3e400 JavaThread "PooledInvokerAcceptor#0-11007" [_thread_in_native, id=4480, stack(0x66570000,0x665b0000)]
0x0cb3dc00 JavaThread "Thread-46" [_thread_blocked, id=4320, stack(0x664f0000,0x66530000)]
0x0cb3cc00 JavaThread "Listener:11009" daemon [_thread_in_native, id=7276, stack(0x66470000,0x664b0000)]
0x0cb3d800 JavaThread "Thread-45" daemon [_thread_blocked, id=4208, stack(0x663f0000,0x66430000)]
0x0cb3f400 JavaThread "Thread-44" daemon [_thread_blocked, id=3328, stack(0x66370000,0x663b0000)]
0x0cb3fc00 JavaThread "Thread-43" daemon [_thread_blocked, id=6360, stack(0x662f0000,0x66330000)]
0x0cb3f000 JavaThread "Listener:11010" daemon [_thread_in_native, id=6164, stack(0x66270000,0x662b0000)]
0x0cb40000 JavaThread "AcceptorThread[ServerSocket[addr=/0.0.0.0,port=0,localport=11005]]" [_thread_in_native, id=4220, stack(0x660f0000,0x66130000)]
0x0cb3e800 JavaThread "ServerSocketRefresh" daemon [_thread_blocked, id=7116, stack(0x66070000,0x660b0000)]
0x0bba9000 JavaThread "HDScanner" [_thread_blocked, id=4784, stack(0x66e70000,0x66eb0000)]
0x0cb42000 JavaThread "AcceptorThread[ServerSocket[addr=/0.0.0.0,port=0,localport=11013]]" [_thread_in_native, id=4144, stack(0x66df0000,0x66e30000)]
0x0cb41800 JavaThread "ServerSocketRefresh" daemon [_thread_blocked, id=5480, stack(0x66d70000,0x66db0000)]
0x0cb41400 JavaThread "secondaryServerSocketThread[0]" daemon [_thread_in_native, id=6244, stack(0x66cf0000,0x66d30000)]
0x0cb40c00 JavaThread "AcceptorThread[ServerSocket[addr=/0.0.0.0,port=0,localport=11008]]" [_thread_in_native, id=5156, stack(0x66c70000,0x66cb0000)]
0x0cb40800 JavaThread "ServerSocketRefresh" daemon [_thread_blocked, id=4288, stack(0x66bf0000,0x66c30000)]
0x0cfad800 JavaThread "RequestController-7" daemon [_thread_blocked, id=2024, stack(0x65a40000,0x65a80000)]
0x0cfad400 JavaThread "RequestController-6" daemon [_thread_blocked, id=8448, stack(0x659c0000,0x65a00000)]
0x0cfacc00 JavaThread "RequestController-5" daemon [_thread_blocked, id=5264, stack(0x65940000,0x65980000)]
0x0cfac800 JavaThread "RequestController-4" daemon [_thread_blocked, id=4964, stack(0x658c0000,0x65900000)]
0x0cfac000 JavaThread "ORB thread" [_thread_blocked, id=7380, stack(0x65840000,0x65880000)]
0x0cfabc00 JavaThread "RequestController-3" daemon [_thread_blocked, id=4620, stack(0x657c0000,0x65800000)]
0x0cfab400 JavaThread "RequestController-2" daemon [_thread_blocked, id=6856, stack(0x65740000,0x65780000)]
0x0cfaa800 JavaThread "ServerSocketListener" daemon [_thread_in_native, id=5856, stack(0x656c0000,0x65700000)]
0x0cfaa400 JavaThread "RequestController-1" daemon [_thread_blocked, id=7136, stack(0x0efe0000,0x0f020000)]
0x0cfa9c00 JavaThread "ZipFile Lock Reaper" daemon [_thread_blocked, id=3488, stack(0x0d8c0000,0x0d900000)]
0x0cf82400 JavaThread "JBoss System Threads(1)-2" daemon [_thread_in_native, id=6140, stack(0x0fba0000,0x0fbe0000)]
0x0d2c4800 JavaThread "GC Daemon" daemon [_thread_blocked, id=7768, stack(0x0fb20000,0x0fb60000)]
0x0c065c00 JavaThread "RMI Reaper" [_thread_blocked, id=380, stack(0x0faa0000,0x0fae0000)]
0x0d3d1c00 JavaThread "RMI TCP Accept-11002" daemon [_thread_in_native, id=3956, stack(0x0fa20000,0x0fa60000)]
0x0ad78000 JavaThread "JBoss System Threads(1)-1" daemon [_thread_in_native, id=8376, stack(0x0f9a0000,0x0f9e0000)]
0x0bfdec00 JavaThread "Timer-Log4jService" daemon [_thread_blocked, id=5736, stack(0x0f610000,0x0f650000)]
0x11fb8c00 JavaThread "AuthenticationCacheFlushThread" [_thread_blocked, id=4160, stack(0x0f590000,0x0f5d0000)]
0x099a2000 JavaThread "Timer-0" daemon [_thread_blocked, id=5324, stack(0x0c700000,0x0c740000)]
0x0137f000 JavaThread "DestroyJavaVM" [_thread_blocked, id=3508, stack(0x003b0000,0x003f0000)]
=>0x099d3800 JavaThread "main" [_thread_in_native, id=7560, stack(0x0a320000,0x0a360000)]
0x099c4400 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=7484, stack(0x0a210000,0x0a250000)]
0x099c1c00 JavaThread "CompilerThread1" daemon [_thread_blocked, id=1736, stack(0x0a180000,0x0a1d0000)]
0x099c1800 JavaThread "CompilerThread0" daemon [_thread_blocked, id=6816, stack(0x0a0f0000,0x0a140000)]
0x099b6800 JavaThread "Attach Listener" daemon [_thread_blocked, id=5716, stack(0x09f70000,0x09fb0000)]
0x099b4000 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=6612, stack(0x09ef0000,0x09f30000)]
0x099ab800 JavaThread "Surrogate Locker Thread (CMS)" daemon [_thread_blocked, id=3556, stack(0x09e70000,0x09eb0000)]
0x09939000 JavaThread "Finalizer" daemon [_thread_blocked, id=2752, stack(0x09df0000,0x09e30000)]
0x09934c00 JavaThread "Reference Handler" daemon [_thread_blocked, id=4240, stack(0x09d70000,0x09db0000)]
Other Threads:
0x009df400 VMThread [stack: 0x09ce0000,0x09d30000] [id=5136]
0x099c5000 WatcherThread [stack: 0x0a290000,0x0a2e0000] [id=7852]
VM state:not at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: None
Heap
par new generation total 14784K, used 3214K [0x12250000, 0x13250000, 0x15250000)
eden space 13184K, 12% used [0x12250000, 0x123e3888, 0x12f30000)
from space 1600K, 100% used [0x12f30000, 0x130c0000, 0x130c0000)
to space 1600K, 0% used [0x130c0000, 0x130c0000, 0x13250000)
concurrent mark-sweep generation total 585648K, used 356667K [0x15250000, 0x38e3c000, 0x52250000)
concurrent-mark-sweep perm gen total 131072K, used 70872K [0x52250000, 0x5a250000, 0x62250000)
Dynamic libraries:
0x00400000 - 0x00424000 C:\Program Files (x86)\Java\jdk1.6.0_18\bin\java.exe
0x77210000 - 0x77390000 C:\Windows\SysWOW64\ntdll.dll
0x76910000 - 0x76a10000 C:\Windows\syswow64\kernel32.dll
0x75850000 - 0x75896000 C:\Windows\syswow64\KERNELBASE.dll
0x757b0000 - 0x75850000 C:\Windows\syswow64\ADVAPI32.dll
0x753a0000 - 0x7544c000 C:\Windows\syswow64\msvcrt.dll
0x76610000 - 0x76629000 C:\Windows\SysWOW64\sechost.dll
0x75080000 - 0x75170000 C:\Windows\syswow64\RPCRT4.dll
0x74d80000 - 0x74de0000 C:\Windows\syswow64\SspiCli.dll
0x74d70000 - 0x74d7c000 C:\Windows\syswow64\CRYPTBASE.dll
0x7c340000 - 0x7c396000 C:\Program Files (x86)\Java\jdk1.6.0_18\jre\bin\msvcr71.dll
0x6db70000 - 0x6df9b000 C:\Program Files (x86)\Java\jdk1.6.0_18\jre\bin\server\jvm.dll
0x76b40000 - 0x76c40000 C:\Windows\syswow64\USER32.dll
0x74f90000 - 0x75020000 C:\Windows\syswow64\GDI32.dll
0x74ee0000 - 0x74eea000 C:\Windows\syswow64\LPK.dll
0x76aa0000 - 0x76b3d000 C:\Windows\syswow64\USP10.dll
0x719e0000 - 0x71a12000 C:\Windows\system32\WINMM.dll
0x767b0000 - 0x76810000 C:\Windows\system32\IMM32.DLL
0x74de0000 - 0x74eac000 C:\Windows\syswow64\MSCTF.dll
0x73da0000 - 0x73deb000 C:\Windows\system32\apphelp.dll
0x6d860000 - 0x6d86c000 C:\Program Files (x86)\Java\jdk1.6.0_18\jre\bin\verify.dll
0x6d3e0000 - 0x6d3ff000 C:\Program Files (x86)\Java\jdk1.6.0_18\jre\bin\java.dll
0x6d340000 - 0x6d348000 C:\Program Files (x86)\Java\jdk1.6.0_18\jre\bin\hpi.dll
0x75020000 - 0x75025000 C:\Windows\syswow64\PSAPI.DLL
0x10000000 - 0x10019000 C:\Users\hkhargharia\Downloads\agntctrl.win_ia32-TPTP-4.2.0.2\plugins\org.eclipse.tptp.javaprofiler\JPIBootLoader.dll
0x002e0000 - 0x002eb000 C:\Users\hkhargharia\Downloads\agntctrl.win_ia32-TPTP-4.2.0.2\plugins\org.eclipse.tptp.javaprofiler\MartiniOSA.dll
0x005c0000 - 0x005f1000 C:\Users\hkhargharia\Downloads\agntctrl.win_ia32-TPTP-4.2.0.2\plugins\org.eclipse.tptp.javaprofiler\JPI.dll
0x00890000 - 0x008b1000 C:\Users\hkhargharia\Downloads\agntctrl.win_ia32-TPTP-4.2.0.2\plugins\org.eclipse.tptp.javaprofiler\JPIAgent.dll
0x009e0000 - 0x00a01000 C:\unzipped\agntctrl.win_ia32-TPTP-4.7.2\bin\AgentBase.dll
0x00a10000 - 0x00a27000 C:\unzipped\agntctrl.win_ia32-TPTP-4.7.2\bin\transportSupport.dll
0x76c40000 - 0x76c75000 C:\Windows\syswow64\WS2_32.dll
0x76660000 - 0x76666000 C:\Windows\syswow64\NSI.dll
0x00a40000 - 0x00a77000 C:\unzipped\agntctrl.win_ia32-TPTP-4.7.2\bin\tptpUtils.dll
0x12000000 - 0x12241000 C:\unzipped\agntctrl.win_ia32-TPTP-4.7.2\bin\xerces-c_2_6.dll
0x00a90000 - 0x00aa6000 C:\unzipped\agntctrl.win_ia32-TPTP-4.7.2\bin\hcclco.dll
0x012a0000 - 0x012b7000 C:\unzipped\agntctrl.win_ia32-TPTP-4.7.2\bin\hcclsm.dll
0x012e0000 - 0x01301000 C:\unzipped\agntctrl.win_ia32-TPTP-4.7.2\bin\tptpConfig.dll
0x01320000 - 0x01335000 C:\unzipped\agntctrl.win_ia32-TPTP-4.7.2\bin\processControlUtil.dll
0x01350000 - 0x01366000 C:\unzipped\agntctrl.win_ia32-TPTP-4.7.2\bin\tptpLogUtils.dll
0x02900000 - 0x0291e000 C:\Users\hkhargharia\Downloads\agntctrl.win_ia32-TPTP-4.2.0.2\plugins\org.eclipse.tptp.javaprofiler\CGProf.dll
0x028a0000 - 0x028ae000 C:\Users\hkhargharia\Downloads\agntctrl.win_ia32-TPTP-4.2.0.2\plugins\org.eclipse.tptp.javaprofiler\CGAdaptor.dll
0x02e60000 - 0x02ec5000 C:\Users\hkhargharia\Downloads\agntctrl.win_ia32-TPTP-4.2.0.2\plugins\org.eclipse.tptp.javaprofiler\JIE.dll
0x6d8a0000 - 0x6d8af000 C:\Program Files (x86)\Java\jdk1.6.0_18\jre\bin\zip.dll
0x6d6c0000 - 0x6d6d3000 C:\Program Files (x86)\Java\jdk1.6.0_18\jre\bin\net.dll
0x740b0000 - 0x740ec000 C:\Windows\system32\mswsock.dll
0x72e00000 - 0x72e06000 C:\Windows\System32\wship6.dll
0x73ea0000 - 0x73eb0000 C:\Windows\system32\NLAapi.dll
0x73e50000 - 0x73e94000 C:\Windows\system32\DNSAPI.dll
0x73e40000 - 0x73e48000 C:\Windows\System32\winrnr.dll
0x73e30000 - 0x73e40000 C:\Windows\system32\napinsp.dll
0x73e10000 - 0x73e22000 C:\Windows\system32\pnrpnsp.dll
0x73c30000 - 0x73c4c000 C:\Windows\system32\IPHLPAPI.DLL
0x73c20000 - 0x73c27000 C:\Windows\system32\WINNSI.DLL
0x71ae0000 - 0x71b18000 C:\Windows\System32\fwpuclnt.dll
0x73eb0000 - 0x73eb6000 C:\Windows\system32\rasadhlp.dll
0x6d610000 - 0x6d619000 C:\Program Files (x86)\Java\jdk1.6.0_18\jre\bin\management.dll
0x740a0000 - 0x740a5000 C:\Windows\System32\wshtcpip.dll
0x739e0000 - 0x739f6000 C:\Windows\system32\CRYPTSP.dll
0x739a0000 - 0x739db000 C:\Windows\system32\rsaenh.dll
0x73d50000 - 0x73d67000 C:\Windows\system32\USERENV.dll
0x73d40000 - 0x73d4b000 C:\Windows\system32\profapi.dll
0x73a50000 - 0x73a5d000 C:\Windows\system32\dhcpcsvc6.DLL
0x73a30000 - 0x73a42000 C:\Windows\system32\dhcpcsvc.DLL
0x6d6e0000 - 0x6d6e9000 C:\Program Files (x86)\Java\jdk1.6.0_18\jre\bin\nio.dll
0x6d0b0000 - 0x6d1fa000 C:\Program Files (x86)\Java\jdk1.6.0_18\jre\bin\awt.dll
0x712f0000 - 0x71341000 C:\Windows\system32\WINSPOOL.DRV
0x75450000 - 0x755ac000 C:\Windows\syswow64\ole32.dll
0x710a0000 - 0x7123e000 C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7600.16661_none_420fe3fa2b8113bd\COMCTL32.dll
0x75170000 - 0x751c7000 C:\Windows\syswow64\SHLWAPI.dll
VM Arguments:
jvm_args: -XX:+UseConcMarkSweepGC -XX:+CMSIncrementalMode -XX:+CMSIncrementalPacing -XX:CMSIncrementalDutyCycleMin=10 -XX:CMSIncrementalDutyCycle=50 -XX:ParallelGCThreads=3 -XX:+UseParNewGC -XX:MaxGCPauseMillis=2000 -XX:GCTimeRatio=10 -XX:+DisableExplicitGC -Dsun.rmi.dgc.client.gcInterval=1800000 -Dsun.rmi.dgc.server.gcInterval=1800000 -Djava.net.preferIPv4Stack=true -Dorg.jboss.resolver.warning=true -Dnet.sf.ehcache.skipUpdateCheck=true -Xss256k -Xms512m -Xmx1024m -XX:PermSize=128m -XX:MaxPermSize=256m -Dremoting.bind_by_host=false -Dclient.encoding.override=UTF-8 -Dfile.encoding=UTF-8 -agentlib:JPIBootLoader=JPIAgent:server=enabled;CGProf -Dprogram.name=run.bat -Djava.endorsed.dirs=D:/JBOSS/jboss-eap-5.1/jboss-as\lib\endorsed
java_command: org.jboss.Main -Dorg.apache.el.parser.COERCE_TO_ZERO=false -Dorg.apache.catalina.connector.Request.SESSION_ID_CHECK=false -Djboss.server.home.dir=D:/Local_Deployment/Èü1
Íø"wport/WINdü1
pport-profile/WINN5Support-profile -Djboss.server.name=domserver -Djboss.server.home.url=file:/D:/Local_Deployment/WINN5Support/WINN5Support-profile/WINN5Support-profile --host=localhost -Djboss.bind.address=0.0.0.0 -Dlog4j.configuration=file:D:/Local_Deployment/WINN5Support/WINN5Support-profile/WINN5Support-profile/conf/log4j.properties
Launcher Type: SUN_STANDARD
Environment Variables:
JAVA_HOME=C:\Program Files (x86)\Java\jdk1.6.0_18
CLASSPATH=C:\Program Files (x86)\Rational\ClearQuest\cqjni.jar
USERNAME=hkhargharia
LD_LIBRARY_PATH=;;;;;;;;;;;;;;;;C:\Users\hkhargharia\Downloads\agntctrl.win_em64t-TPTP-4.2.0\lib
OS=Windows_NT
PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 37 Stepping 2, GenuineIntel
--------------- S Y S T E M ---------------
OS: Windows 7 Build 7600
CPU:total 4 (8 cores per cpu, 2 threads per core) family 6 model 37 stepping 2, cmov, cx8, fxsr, mmx, sse, sse2, sse3, ssse3, sse4.1, sse4.2, popcnt, ht
Memory: 4k page, physical 4053388k(293900k free), swap 8104872k(2962556k free)
vm_info: Java HotSpot(TM) Server VM (16.0-b13) for windows-x86 JRE (1.6.0_18-b07), built on Dec 17 2009 13:29:37 by "java_re" with MS VC++ 7.1 (VS2003)
time: Thu Oct 11 11:42:43 2012
elapsed time: 1944 seconds
Edited by: 964644 on Oct 10, 2012 11:58 PM10.6.8 won't run on a PowerPC Mac.
10.6.8 also won't run the latest Java. Here's what version of Java you can run:
https://discussions.apple.com/docs/DOC-5532 -
I don't know how to get to the crash ID since I can't get into the Firefox window to go to 'help'.
The crash report details:
AdapterDeviceID: 0322
AdapterVendorID: 10de
Add-ons: [email protected]:1.0,{972ce4c6-7e08-4474-a285-3208198ce6fd}:6.0.2
AvailableVirtualMemory: 2043473920
BuildID: 20110902133214
CrashTime: 1316129359
EMCheckCompatibility: true
FramePoisonBase: 00000000f0de0000
FramePoisonSize: 65536
InstallTime: 1315428336
Notes: AdapterVendorID: 10de, AdapterDeviceID: 0322, AdapterDriverVersion: 5.3.1.6
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 95303
StartupTime: 1316129351
SystemMemoryUsePercentage: 91
Theme: classic/1.0
Throttleable: 1
TotalVirtualMemory: 2147352576
Vendor: Mozilla
Version: 6.0.2
Winsock_LSP: MSAFD Tcpip [TCP/IP] : 2 : 1 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [UDP/IP] : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [RAW/IP] : 2 : 3 : %SystemRoot%\system32\mswsock.dll
RSVP UDP Service Provider : 6 : 2 : %SystemRoot%\system32\rsvpsp.dll
RSVP TCP Service Provider : 6 : 1 : %SystemRoot%\system32\rsvpsp.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{1A17B1B8-0476-4031-98B2-13100AC671BC}] SEQPACKET 4 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{1A17B1B8-0476-4031-98B2-13100AC671BC}] DATAGRAM 4 : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{DD1B74E0-8FEF-4EF5-B109-2CA4631682AC}] SEQPACKET 3 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{DD1B74E0-8FEF-4EF5-B109-2CA4631682AC}] DATAGRAM 3 : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{469CBEE7-DE58-4D0C-BA40-FE44EC78F932}] SEQPACKET 0 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{469CBEE7-DE58-4D0C-BA40-FE44EC78F932}] DATAGRAM 0 : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{2E33DF80-687E-463A-A98D-C8332CE564C9}] SEQPACKET 1 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{2E33DF80-687E-463A-A98D-C8332CE564C9}] DATAGRAM 1 : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{EB416DA2-FDC7-4A17-9FAF-C6536909FD4F}] SEQPACKET 2 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{EB416DA2-FDC7-4A17-9FAF-C6536909FD4F}] DATAGRAM 2 : 2 : 2 : %SystemRoot%\system32\mswsock.dllCreate a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
* https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
* http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
See:
* http://kb.mozillazine.org/Firefox_crashes
* https://support.mozilla.com/kb/Firefox+crashes
* https://support.mozilla.com/en-US/kb/latest-firefox-issues
If you have submitted Breakpad crash reports then post the IDs of one or more Breakpad crash reports (bp-xxxxxxxx-xxxxxxxxx-xxxx-xxxxxxxxxxxx). You can find the IDs of the submitted crash reports on the about:crashes page. You can open the about:crashes page via the location bar, like you open a website.
See:
* http://kb.mozillazine.org/Breakpad (Mozilla Crash Reporter)
* https://support.mozilla.com/kb/Mozilla+Crash+Reporter
* https://developer.mozilla.org/en/How_to_get_a_stacktrace_for_a_bug_report
<br>
Firefox 8
* getfirefox.com -
Firefox version 16.0.2 was working I have used FF for years. A few days ago it started to run very slow opening web sites. Then this morning when I tried to open it I saw a progress bar that looked like the kind I see after an update has been applied but FF never opened.
I rebooted my windows 7 64 bit and tried again, nothing FF would not open and I got no error message.
So I opened the profile manager and only found a default profile not the one I created last year with my name. I created a new profile and browsed to my old profile folder. FF opened and ran fine until I closed it and later tried to open it again then I kept getting an error box telling me that FF had crashed and asked if I wanted to send a report and restart, I did but no good it still would not open.
I ran the profile manager again and found my profile had changed name to a bunch of numbers. I delete that profile but kept the folder then made a new one and that worked. I shut it down again and once again I get the We're sorry error box.
By the way I had set the profile manager to open when FF loads and it is not opening so the problem is before it gets to that command.First I already have my view set to show everything so that is not the problem.
But I just tried opening "Computer" from the start button then type in profiles.ini in the address bar and hit enter. The profile manager opened with my profile listed. I selected it and hit start firefox and it opened as it should.
I closed it again and tried to open it from the shortcut in my task bar and I got the Sorry window.
But then I tried to open it from the short cut you get when you press the start button and program list and it work!
I went back to my desk top and tried the short cut on the desk top and it worked.
So I deleted the short cut on the task bar and created a new one and it worked.
I rebooted the computer and tried again and the task bar shortcut works and has the right profile.
So it seems that the problem is that the short cut was corrupted and was causing the error that caused the program to fail to open.
I had no idea a shortcut could do that. In the past I have had short cut stop working but never do what this one did.
I still have no idea where the profiles.ini is.
Maybe you are looking for
-
CDATA error. Is it me or Sun?
I have a sample xml below and Sun's java source code. When use jdk1.3.1 or 1.4 and jaxp as the parser, I got error when turn on validation. Also, the CDATA section does not show properly when turn of validation (only show: Diagram:). Why "Text" still
-
HELP !! Urgent !! Object in contexts
Hello, I have really urgent task to do. I need have access to object kept in <input type="file"> object. Is it possible to get the object without submitting the form ?? I suppose that page has to hold the object somewhere but have no idea how to acce
-
When Flash is inserted into my template the following code appears: <script type="text/javascript"> AC_FL_RunContent( 'codebase',' http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0', 'width','1024', 'height','120',
-
[AS3] Cannot sync sharedObjects
Hello, Ive tried converting the SharedObject tutorial [http://www.adobe.com/devnet/flashmediaserver/sample_apps.html] provided by Adobe from AS2 to AS3. When one client moves the ball, the other client should be able to see the ball moving on another
-
ValueChangeListener on LOV not invoked 2nd time
Hi All , I am using Jdev 11.1.1.6 with WLS 10.3.5 and ADF BC. I have a LOV which is bound to an attribute of a VO. Below the LOV I have the same VO dropped as a table. Initally I am creating an empty row for the table since no rows exist. So the LOV