Mesh Warp effect grid doesn't show in AE CS5 for Mac?

I'm trying to apply the Mesh Warp effect to a layer in AE CS5 on my Mac. I'm running AE CS5 v10.0.2.4 on Mac OS X 10.6.7. It looks like the version of the Mesh Warp effect is v2.0. When I apply the effect to the layer, I don't get any grid lines in the Composite view to let me distort the layer. I've tried moving the effect above and below the other effect applied to this same layer. That doesn't seem to matter.
Any idea what's going on?
Here's a screen shot:

Thanks. That did the trick.
The weird thing is, I had tried that before and it didn't work. I walked away, slept, and when I came back and tried your suggestion again it worked.
LOL, I guess that shows sometimes you just have to walk away for a little bit.
At any rate, I appreciate your timely suggestion and response.

Similar Messages

Arial Unicode MS font doesn't appear in PhotoShop CS5 for MAC

Hello, I'm having a problem with Arial Unicode MS font in MAC. The other apps such as TextEdit, Pixelmator... can see the font but not PhotoShop CS5 and the other apps in the CS5 suite (Flash, Illustrator...)
Does anyone have the same problem with me? Could you help me to solve this problem?
Thanks in advance,
Chinh Do

Check the entire font menu, all the way to the bottom. The font may not be in the alphabetical order you expect, but towards the end of the list, among the Asian fonts or so.
Wo Tai Lao Le
我太老了

I have iwork on two computers, but my account doesn't show record of it for my being able to reinstall on the new computer. Is there a time limit? I tried airdrop, but it won't let me use it.

I have iwork on two computers, but my account doesn't show record of it for my being able to reinstall on the new computer. Is there a time limit? I tried airdrop, but it won't let me use it.

Sounds like you installed iWork from before there was the Mac App Store.
If you installed it from a Family DVD you are entitled to install that on 5 computers and can do that from the DVD.
If not then you need to purchase it from the M.A.S. and will be able to install it on any of your computers using the same Apple I.D. However Apple is promising a new version before Christmas so it may not be a good time to buy now.
Peter

Just got a Nikon D610 and CS5 for Mac can't open the images -- message says installed version of camera raw doesn't support the camera. Downloaded the Raw 6.2 update for Mac, but installation failed. Now what?

just got a Nikon D610 and CS5 for Mac can't open the images -- message says installed version of camera raw doesn't support the camera. Downloaded the Raw 6.2 update for Mac, but installation failed. Now what?

The D610 didn't get out-of-the-box RAW support until Photoshop CC.
You can either upgrade to CC or use the DNG Converter to convert and open your DNGs in CS5.

I have samsung corby gts3653 mobile and need to connect internet to mac through it but it doesn't have wifi and pcsuite for mac and how could i able to connect it through gprs? GPRS is active in mobile but unable to link it with macbook pro(using lion os)

i have samsung corby gts3653 mobile and need to connect internet to mac through it but it doesn't have wifi and pcsuite for mac and how could i able to connect it, through gprs? GPRS is active in mobile but unable to link it with macbook pro(using lion os) can any one reply.

Until the MacBook Air was released and supported in 10.5, the Mac did not consider USB to be a valid Networking Protocol. So set the Mac with USB solutions aside.
To connect computer-to-computer, you typically need to be using an Ethernet crossover cable. Assigning the same address to two Ethernet devices is never the solution -- it gives a Network Conflict, just as you said.
If your Windows box has some mechanism for Sharing its WiFi connection over Ethernet, you would have to follow its rules. Whether that means Manually assigning an Ethernet Address in the same range or the PC will provide the Address, I do not know.
Best success may be running an Ethernet cable to your Wired/Wireless Base Station, or using a "gaming adapter" (Ethernet-to-Wireless no drivers required) connected to the Mac's Ethernet port to give it WiFi access. What is your Base Station {Cable, DSL, FIOS, Other} ? Ethernet cables can be up to 100 meters (an American Football Field). Often the Base Station can be moved closer for more convenience.

Follow on document display doesn't show any PO no. for Service SC

Hi,
We are using SRM 4.0 with extended classic scenario & currently on support pack 7.
Follow On document display in SC doesn't show PO no.
This Problem seems to be happening only for "Request external staff SC" & "Order SC" functionality ( BBPSC03) while ordering services. Link between SC & follow on document (PO) goes missing even though PO is properly created in SRM system ( being a Extended classic scenario) & also PO copy is available in R/3.
Service SC looks okay if we order it through "internal goods/Service", Describe requirement or through catalogue application.
any help is appreciated & rewarded with full points.
Regards
Bharat

I was a little bit impatient.
Juste need to wait that some people actualy use the transaction so that the system can record the datas. :-s

ITunes doesn't show Google as option for contact sync

I'm trying to sync my Google contacts with my 5gen Nano using iTunes 9.0.0.70 on Windows XP (2005 tablet edition, SP3). I'm following the instructions on http://support.apple.com/kb/HT1245 and http://www.google.com/support/mobile/bin/answer.py?answer=138744&cbid=-4q5r0l4gj gdw&src=cb&lev=answer
iTunes doesn't show an option for syncing with Google. When I go to My iPod > Contacts, and enable to "Sync contacts from" checkbox, I just see an option for "Windows address book" and "Microsoft Outlook" but nothing else.
*How do I get iTunes to show Google as a sync source?*
I've poked around on the intertubes a bit and seen mention of gconsync.exe. It's present under "C:\Program Files\Common Files\Apple\Mobile Device Support\bin" and executes when I run it (generating a wad of help info).
TIA

I guess you missed the part in the instructions where it says "if you have an iPhone or iPod touch". Those instructions won't work with an iPod nano, unless someone here knows a trick or workaround I've not heard of.
Regards.

Help! External hard drive (WD) doesn't show up anywhere (except for in System Information)...

Hi,
My WD hard drive (160 gb, 3-4 years old) all of a sudden won't show up in Disk Utility or Finder.
Prior to this, I got an error message, saying something like "back up your data and reformat the disk", and I bought myself a new hard drive (a Verbatim) for this. When I connected the two hard drives, the WD wouldn't show up anywhere, except for in System Information, where the following message is displayed under "USB":
External HDD :
Product ID: 0x0702
Vendor ID: 0x1058 (Western Digital Technologies, Inc.)
Version: 1.02
Serial Number: ????????????????????????
Speed: Up to 480 Mb/sec
Manufacturer: Western Digital
Location ID: 0x14200000 / 9
Current Available (mA): 500
Current Required (mA): 0
My Macbook Pro is a 11.1, with Mavericks installed.
I have all the recordings of my band's new album on this drive, so any help would be greatly appreciated.
Thanks!

I'd have to agree with WZZZ. That sounds like either a bad connection, bad cable, or faulty supply. The port could be bad as well but the cable either being bad or not properly plugged in or maybe even worn out. When the "disk ejected" message shows up it's usually because somehow the cable was yanked out of the system while it was plugged in. Intermittenet connections in the cable, particularly in supply lines between the drive and the unit can cause this to happen as well...it's as if you unplugged the external hard drive from the system for a very short time, but the system still picks it up and sees it as bad.
If worse comes to worse, download the hard drive troubleshooting book in the downloads section at:
http://scsc-online.com

How can I get my iCloud calendars to show up in Outlook for Mac

I just bought a new Mac and downloaded MS Office 365 for Mac. How can I import my icloud calendar into Outlook? I can't find any concrete info anywhere online.
Thanks!

Apple's documentation doesn't mention this as far as I can see: however it's correct that subscribed calendars could not be viewed on MobileMe (though they did sync to other devices: however it would seem that what was synced was the details of the subscription, not the calendar itself, so that effectively the other device just subscribed to the calendar afresh).
I think that, subject to correction from someone who's managed to do this it's a safe assumption to say that you cannot view subscribed calendars on the iCloud website, and that this is very likely a limitation of the CalDAV process.

Appointments not showing in Outlook Office for Mac 2011

I have recently migrated my pc Outlook to Office for Mac.I have 2 issues so far: 1: is that when I create then save an appointment is doesnt show in calendar. 2:Is that whilst my migrated mail shows under "On my computer" I seem unable to attach/configure an email account to it effectively making it little more than an archive. Can anyone advise?

In Word,
File | Open
Click on Your HD, double click Users, then find and double click on
[your username] (as opposed to Shared).
Double-click Library.
Scroll down to Application Support, double click, and choose
Microsoft. Select Office, and then find User Templates You should see
Normal.dot or Normal.dotm.
Open this, and adjust ALL the settings you like (margins, font, spacing, you can even type in the doc to include space for where you want your name, title, date to appear on every document you create in the future!)
Don't forget to SAVE! Then exit.
Open a new doc and fill in the blanks/change your prompts and GO!

IOS for iPhone won't show up only iOS for Mac will

When I try to get the beta update for iOS on iPhone nothing shows up for the iPhone. It only shows up for Mac. And it's been that way since before iOS 3 was released for everyone

Sam here. I have an original iPhone 8gb - always been really good and reliable and I have no real need to upgrade it. I have a MacBook Pro latest OS and I have a problem. My iPhone will not show up on iTunes when I want to sync them. It used and now it doesn't
I have been through the Apple help pages and followed every last instruction to the letter, changing USB port, on/off, hard resets, uninstalling iTunes and reinstalling it, zapping the P-RAM, three different cables, and nothing. It is driving me absolutely mad.
Anyone ...anything ...please.

Open Outlook Contact doesn't work in Microsoft Lync for Mac ver14.0.10

Hi guys,
as the subject, no response after I click "Open Outlook Contact" in Lync contact card. Does it a known issue?
Thanks!
Charlie

Thanks Eric!
I built an OS X VM, and installed office for mac 2011, Lync for mac 2011. But the Open Outlook Contact button in Lync Contact Card is gray (I cannot click it). It shows below error.
I can click that button but no response in my MACBOOK PRO.
It's crazy for me. Can you share the software download location and install sequence with me?
I downloaded Office for Mac 2011 & Lync for Mac 2011 from my MSDN subscription download.
Thanks!
Charlie

Certificates now showing up in Outlook for mac or Mail app.

I want to use outlook for mac to get my e-mails from work. I installed the certificate that i need to connect to the exchange server. I can see it in my keychain. But when i add my account details into Outlook or Mail, and it gives me the popup that i need a certificate, i can't select the certificate that i installed. I only get the preinstalled ones from OSX but not the one i installed myself that i need to connect to the server.
In outlook for mac it only shows me the certificates from the category "my certificates" in the keychain, while the certificate i installed from work is being put into the "certificates" category.
Is there any way how i can Outlook or Mail to recognize the certificate that i installed ?

I have taken some screenshots to clarify the problem a bit more :
http://i.imgur.com/C7IllNF.png ( certificate installed )
http://i.imgur.com/3VvXiV8.png ( does not show in 'my certificates' )
http://i.imgur.com/DnjfshX.png ( outlook not showing certificate )
http://i.imgur.com/LPaGmAa.png ( Mail not showing the certificate )

After Effects CC doesn't show the Comp Screen

Hey Guys,
Since a few days, I have a really bad problem with AE CC. Everytime I'll open AE and start a new composition, everything's working fine. But the preview of my comp is not shown...
Neither a reinstallation of AE nor a reinstallation of my graphics driver solve my problem.
Please help me!
I'm sorry for my bad english ://

You need to reset your workspace. Find it here:

ICal in Day view doesn't show hours, but Days for the hours?

Ok, so I have been trying to figure this out but I cannot find the answer. In iCal, I cannot change the hour of a new event. It only allows me to change the min. So I went into the Day view to try and move the events to the correct hours and all it shows is Midnight, Saturday over and over (where the hours should be) and then Noon and then Saturday over and over again. I have no idea why it does this and have searched through the settings and cannot figure it out. Can anyone help me?
I have posted a screen shot of my problem at
http://public.me.com/dozierredraider
Thank you

DozierRedRaider,
Welcome to Apple Discussions.
First of all try refreshing the com.apple.iCal.plist file. You will find the com.apple.iCal.plist file in your Macintosh HD/Users/yourusername/Library/Preferences Folder. Quit iCal, drag the .plist file to your Desktop, log out/in or restart and check iCal for normal behavior.
If that is unsuccessful, open System Preferences...>Language & Text>Formats, and choose, or change the appropriate region. Then check/change the "Times" formats that you are using.
;~)

Mesh Warp effect grid doesn't show in AE CS5 for Mac?

Similar Messages

Maybe you are looking for