Mesh with WLC (7.0.220)

Dear Tech Gurus,
Can any one help me regarding channel assignament at root and mesh access points.
will the channel be same on all RAPS and MAPS (5Ghz).
With Regards,
Chaitanya.G

Your RAP's should be on different channels. So it will depend on how far apart your RAP's will be apart from each other to get the channel separation you need. Your MAP's will be assigned the same channel as the parent RAP. Makes sense?
Thanks,
Scott Fella
Sent from my iPhone

Similar Messages

Help me : Problem with WLC and AP

Hi,
We have a few AP on our network which work fine.
But, those which are behind our fw don't work.
LAN WI-FI with WLC <>--------Lan Routed---with Ap (Ok) ------------------
<> -------FW <> Vlan behind Fw and APs not work fine.
WLC = Software Version 7.0.220.0
Logs on WLC :
spamApTask2: Jun 04 11:49:59.494: %DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:631 Failed to complete DTLS handshake with peer 172.37.251.71
*spamApTask1: Jun 04 11:48:49.323: %DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:631 Failed to complete DTLS handshake with peer 172.37.251.71
*spamApTask2: Jun 04 11:47:39.149: %DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:631 Failed to complete DTLS handshake with peer 172.37.251.71
*spamApTask1: Jun 04 11:46:28.978: %DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:631 Failed to complete DTLS handshake with peer 172.37.251.71
*spamApTask2: Jun 04 11:45:18.806: %DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:631 Failed to complete DTLS handshake with peer 172.37.251.71
*spamApTask1: Jun 04 11:44:08.632: %DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:631 Failed to complete DTLS handshake with peer 172.37.251.71
*osapiBsnTimer: Jun 04 11:43:51.235: %DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:2202 Failed to complete DTLS handshake with peer 172.37.251.71
debud dtls :
*spamApTask1: Jun 04 11:22:42.434: 64:a0:e7:5f:e5:70 record=Alert epoch=0 seq=2
*spamApTask1: Jun 04 11:22:42.435: 64:a0:e7:5f:e5:70 SSL_do_handshake: SSL_ERROR_SSL while communicating with 172.37.251.71 : (null)
*spamApTask1: Jun 04 11:22:42.435: 64:a0:e7:5f:e5:70 Requested by openssl_dtls_process_packet
*spamApTask1: Jun 04 11:22:42.435: dtls_conn_hash_delete: Deleting hash for Local 172.18.3.2:5246 Peer 172.37.251.71:52258
*spamApTask1: Jun 04 11:22:42.435: 64:a0:e7:5f:e5:70 DTLS Connection 0x145520d0 closed by controller
*spamApTask1: Jun 04 11:22:42.436: dtls_conn_hash_search: Searching hash for Local 172.18.3.2:5247 Peer 172.37.251.71:52258
Cordially,

HI,
- On the fw-
a. Make sure the FW is open for udp 5246 and 5247 ports required for the capwap process.
If this is a cisco ASA, you can set up ingress and egress packet captures to see what packets enter and leave the FW for this AP-
cap capin interface match udp any
cap capout interface match udp any
**match captures bidirectional flow for the interesting traffic.
b. Check the logs on the firewall for any drops.
c. cap capdrop type asp-drop all
This will tell you if the pkt was dropped and the reason for the drop
d. You can run the packet-tracer command on the firewall tracking this udp flow-
e.g. packet-tracer input inside udp 3.3.3.3 1212 2.2.2.3 5246 detailed
- What AP model is this? Is it the same AP that connects to the controller if there is no fw in the path?
- Does it use MIC or SSC cert? If SSC, make sure you have SSC checked and you will need to manually enter the hash for the AP on the controller under AP Authorization List -
Security> AP Policies
You can get the hash of the AP (f you dont have it) by enabling the following debug on the controller
debug pm pki enable
Other controller debugs for the AP-
debug mac address
debug capwap error enable
debug capwap events enable
- What about AP console log? Do you have access to that?

Trunk with WLC and 1400BR problem

hi everybody,
i have the next proble, i hope someone can help me
Actually I wrok with a 1522 Mesh Network,1130 LWAPP and Bridge 1400 point to point. 1522 and 1130 are asociated with WLC.
I have a WLC4402 (4.1.192.22M (Mesh)image) this wlc is conected via trunk to Sw3750 ex:
interface GigabitEthernet1/0/1
switchport trunk encapsulation dot1q
switchport mode trunk
RAP1 is connected to the sameSw3750 ex:
interface FastEthernet1/0/23
description RAP1
switchport access vlan 10
**(VLAN 10 is Mgmt)**
AP1(1130) is connected to the same Sw3750 ex:
interface FastEthernet1/0/1
description AP1
switchport access vlan 10
The 1410BR Root is connected via trunk to same Sw3750 ex:
interface FastEthernet1/0/19
description BR-1400R
switchport trunk encapsulation dot1q
switchport trunk native vlan 10
switchport mode trunk
In the other point is the Non-Root connected to a Sw2960 ex:
interface GigabitEthernet1/0/1
switchport trunk native vlan 10
switchport mode trunk
AP2(1130) connected to the same Sw2960 ex:
interface fa0/23
descriptipon AP2
switchport access vlan 10
The network is work fine, Mesh UP (RAP and MAPs), and 1130 too.I connected the 1400 Bridge point after the Mesh is up, and the link between Root and Non Root is UP
Now, when the Sw3750 goes down or reboot,the RAP and AP1(1130) can't associated to WLC. The ports of RAP and 1130 are down and up many times, so can't associated to a WLC. Only the Bridge point 1400 Root and Non-root are UP, and the AP2(1130) in the other side can associated to the WLC.
When shutdown the port of the Root Bridge, Now the RAP1 and AP1(1130) can associated to the WLC and the Mesh Net is UP. Then no shutdown the Root Bridge port and the link between Bridges are UP, AP2(1130) up to the controller too.
But after several minutes the Bridge down, and the event log in the Root is:Interface Dot11Radio0 Radio transmit power out of range.
So i have this problems
1) Trunks between WLC and 1400 BR
2) Bridge conectivity range.
Regards
Antonio

The Outdoor Bridge Range Calculation Utility uses parameters that include regulatory domain, device type, data rate, antenna gain, and a few others as inputs.
You can avoid connectivity problems with the Outdoor Bridge Calculation Utility, as this tool helps you to predict the distance between devices. In a wireless environment without a tool like this, you cannot predict the distance between the bridges, the height at which you must place the antennas for maximum throughput, and other variables. This utility also helps you decide on the type of antenna that you must use in order to cover the distance between the bridges.

Connecting Cisco AIR-CAP2602E over WAN with WLC - Procedural Details

Hi,
I have a Wireless LAN Controller Installed in one of the subnets where some AIR-CAP2602E's are connected with the WLC. WLC acts as DHCP for the AIR-CAP2602E Devices.
I have additional AIR-CAP2602E access-points at other location (Subnet) and Need to connect them with WLC.
Challange faced by me is creating DHCP on Cisco 2950 (L2) or 3750 (L3) with DHCP option 43. Can any one has detailed configuration of enabling DHCP for specific VLAN on Cisco L2 and L3 Devices.

If you have control of the DNS environment for these network segments, just make an entry for :
cisco-lwapp-controller aliases cisco-capwap-controller (IP list) as the CAP will hunt for those two name sets.
My WLC provides DHCP support only to the wlans supported by the AP but not the AP it self..
hope this helps

ISE device registration webauth with wlc 7.0 lwa

Is it possible to use the DRW feature with WLCs running 7.0 code? All configuration examples refer to 7.2 code. Its only for guest user device registration. No profiling / provisioning.
Compatibility matrix says that "Wireless Controllers support MAC filtering with RADIUS lookup. For WLCs that support version 7.2.103.0, there is support for session ID and COA with MAC filtering so it is more MAB-like."
Thanks.

Hi,
The reason you need to run the upgraded code is that the radius NAC feature coupled with a mac-filtering enabled SSID will work together. On the release prior you were unable to get both features to work with one another.
For your reference here is the item in the New Features section of the 7.2 WLC release notes:
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7_2.html#wp855314
thanks,
Tarik Admani
*Please rate helpful posts*

What is the lowest ISE version supported with WLC 7.3.112.0

Dears
Kindly i want to know what is the lowest version of ISE supported with WLC 7.3.112.0 or WLC 7.3.101.0
Please need your feedback.
Regards,

the lowest version of ise supported wlc 7.3 is ISE 1.2 as per document :
Wireless LAN Controller (WLC) 2500 8
7.3.112.0.(ED), 7.4.x, 7.5
Yes 9
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Wireless LAN Controller (WLC) 5500 8
7.3.112.0.(ED), 7.4.x, 7.5
Yes 9
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Wireless LAN Controller (WLC) 7500 8
7.3.112.0.(ED), 7.4.x, 7.5
Yes 9
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Wireless LAN Controller (WLC) 8500 8
7.3.112.0.(ED), 7.4.x, 7.5
Yes 9
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/compatibility/ise_sdt.html
ISE 1.1 won't support wlc 7.3 :
http://www.cisco.com/c/en/us/td/docs/security/ise/1-1/compatibility/ise_sdt.html
Wireless LAN Controller (WLC) 2100, 4400
7.0.116.0
No6
Yes
No
Yes
Yes
Yes
Yes
No
No
Wireless LAN Controller (WLC) 2500, 5500
7.2.103.0
No6
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
WLC 7500 Series
7.2.103.0 (basic RADIUS auth supported in 7.0.116.0)
Yes6
Yes
No
Yes (local only)
No
Yes
No
No
No

Troubleshoot Cisco Airlap 1242 with WLC 4400 Series LWAPP_CLIENT_ERROR_DEBUG: spamHandleCfgReqTimer: Did not recieve the Config response

I have a Problem with my new AIRLAP 1242 to connect with WLC 4400
after debug in my airlap it shows :
Reset done!
ethernet link up, 100 mbps, full-duplex
Ethernet port 0 initialized: link is up
Loading "flash:/c1240-k9w8-mx.123-7.JX8/c1240-k9w8-mx.123-7.JX8"...######################################################################################################################################################################################################################################
File "flash:/c1240-k9w8-mx.123-7.JX8/c1240-k9w8-mx.123-7.JX8" uncompressed and installed, entry point: 0x3000
executing...
              Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706
Cisco IOS Software, C1240 Software (C1240-K9W8-M), Version 12.3(7)JX8, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Mon 19-Mar-07 01:42 by hqluong
Image text-base: 0x00003000, data-base: 0x004051E0
Initializing flashfs...
flashfs[1]: 9 files, 3 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 15998976
flashfs[1]: Bytes used: 5062144
flashfs[1]: Bytes available: 10936832
flashfs[1]: flashfs fsck took 4 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.
cisco AIR-LAP1242AG-E-K9   (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.
Processor board ID FCW1411U0FZ
PowerPCElvis CPU at 266Mhz, revision number 0x0950
Last reset from power-on
1 FastEthernet interface
2 802.11 Radio(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 68:EF:BD:5F:9A:18
Part Number                          : 73-10256-07
PCA Assembly Number                  : 800-26918-06
PCA Revision Number                  : A0
PCB Serial Number                    : FOC14093XU3
Top Assembly Part Number             : 800-29152-03
Top Assembly Serial Number           : FCW1411U0FZ
Top Revision Number                  : A0
Product/Model Number                 : AIR-LAP1242AG-E-K9
Press RETURN to get started!
*Mar 1 00:00:05.608: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
*Mar 1 00:00:06.858: %DOT11-2-VERSION_INVALID: Interface Dot11Radio0, unable to find required radio version 581.18
*Mar 1 00:00:06.858: Interface Dot11Radio0, Accepting as a test version of radio firmware
*Mar 1 00:00:06.878: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0
*Mar 1 00:00:07.234: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Mar 1 00:00:08.212: %DOT11-2-VERSION_INVALID: Interface Dot11Radio1, unable to find required radio version 581.18
*Mar 1 00:00:08.212: Interface Dot11Radio1, Accepting as a test version of radio firmware
*Mar 1 00:00:08.232: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1
*Mar 1 00:00:09.278: %SYS-6-LOGGERSTART: Logger process started
*Mar 1 00:00:09.326: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1240 Software (C1240-K9W8-M), Version 12.3(7)JX8, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Mon 19-Mar-07 01:42 by hqluong
*Mar 1 00:00:09.332: %CDP_PD-4-POWER_OK: Full power - AC_ADAPTOR inline power source
*Mar 1 00:00:09.388: %DOT11-6-FREQ_SCAN: Interface Dot11Radio0, Scanning frequencies for 32 seconds
*Mar 1 00:00:10.271: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
*Mar 1 00:00:10.332: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Mar 1 00:00:10.332: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 00:00:11.271: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up
*Mar 1 00:00:28.331: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
*Mar 1 00:00:28.361: %DOT11-6-FREQ_USED: Interface Dot11Radio0, frequency 2462 selected
*Mar 1 00:00:28.362: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down
*Mar 1 00:00:28.363: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:00:28.369: %DOT11-6-FREQ_USED: Interface Dot11Radio1, frequency 5260 selected
*Mar 1 00:00:28.372: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:00:28.398: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:00:28.399: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Mar 1 00:00:28.465: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:00:29.398: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Mar 1 00:00:29.465: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
Translating "CISCO-LWAPP-CONTROLLER.ekahospital.com"...domain server (202.134.0.155)
*Mar 1 00:00:38.351: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 172.31.xxx.xxx, mask 255.255.255.0, hostname AP68ef.bd5f.9a18
*Mar 1 00:00:38.820: %DOT11-6-FREQ_USED: Interface Dot11Radio0, frequency 2417 selected
*Mar 1 00:00:38.827: %DOT11-6-FREQ_USED: Interface Dot11Radio1, frequency 5200 selected (203.130.196.5)
*Mar 1 00:00:49.835: %DOT11-6-FREQ_USED: Interface Dot11Radio0, frequency 2422 selected
*Mar 1 00:00:49.842: %DOT11-6-FREQ_USED: Interface Dot11Radio1, frequency 5220 selected
*Mar 1 00:00:49.851: %LWAPP-5-CHANGED: LWAPP changed state to JOIN
*Mar 1 00:00:49.852: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Mar 1 00:00:49.852: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
*Mar 1 00:00:50.852: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 00:00:50.852: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Sep 18 07:02:25.504: %LWAPP-5-CHANGED: LWAPP changed state to CFG
*Sep 18 07:02:29.288: LWAPP_CLIENT_ERROR: lwapp_name_lookup - Could Not resolve CISCO-LWAPP-CONTROLLER.MYDOMAIN.com
*Sep 18 07:02:30.504: LWAPP_CLIENT_ERROR_DEBUG: spamHandleCfgReqTimer: Did not recieve the Config response
*Sep 18 07:02:30.551: %SYS-5-RELOAD: Reload requested by LWAPP CLIENT. Reload Reason: DID NOT GET CONFIG RESPONSE.
*Sep 18 07:02:30.551: %LWAPP-5-CHANGED: LWAPP changed state to DOWNXmodem file system is available.
flashfs[0]: 9 files, 3 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 15998976
flashfs[0]: Bytes used: 5062144
flashfs[0]: Bytes available: 10936832
flashfs[0]: flashfs fsck took 26 seconds.
Base ethernet MAC Address: 68:ef:bd:5f:9a:18
Initializing ethernet port 0...
Reset ethernet port 0...
Reset done!
and after that i check in my WLC that shows
AP with Base Radio MAC xx:xx:xx:xx:xx:xx (APxxxx.xxxx.xxxx) is unable to associate.
The reulatory domain configured on it '-e' does not match the controller's country
code: USA
i found that the problem about the region.
question :
1. is it possible to change the region in AIRLAP 1242 or in WLC?
2. if possible how to change it?
INFO :
my first AIRLAP Product/Model Number : AIR-LAP1242AG-A-K9 and my new AIRLAP Product/Model Number : AIR-LAP1242AG-E-K9

WLC GUI >> Wireless >> Country >> Select the country.
Regards
Surendra

Client get connected occationally with WLC 5508

Hi ,
I have one strange problem on wireless connection.
I just upgraded several 1131 APs to LAP with 2 new Cisco 5508 controller deployed, and we found the clients sometime can get conneted to the 1131 AP, and connection well, sometimes cannot. during our test, one conecion is ok, next one cannot, the third one seems ok again and again.
And we also have 2 new 1140 APs, seems no such problem,
The version for controller is 6.0.196.0, and Client is Lenevo PC with XP.
Any suggestion? or some troubleshooting procedure I can follow?
Thanks!
Roy

Thanks!
Seems some problem with open authentication.
On the Client, it reported cannot get associated.
on the WLC, while I am debug client it reports:
*Jul 14 10:18:51.844: 00:1f:3c:c2:e9:71 Sending Assoc Response to station on BSSID c4:7d:4f:47:a5:c0 (status 12)
*Jul 14 10:18:51.889: 00:1f:3c:c2:e9:71 Ignoring 802.11 assoc request from mobile pending deletion
*Jul 14 10:18:51.889: 00:1f:3c:c2:e9:71 Sending Assoc Response to station on BSSID c4:7d:4f:47:a5:c0 (status 12)
*Jul 14 10:18:51.928: 00:1f:3c:c2:e9:71 Ignoring 802.11 assoc request from mobile pending deletion
*Jul 14 10:18:51.928: 00:1f:3c:c2:e9:71 Sending Assoc Response to station on BSSID c4:7d:4f:47:ae:b0 (status 12)
*Jul 14 10:18:52.446: 00:1f:3c:c2:e9:71 apfMsExpireCallback (apf_ms.c:418) Expiring Mobile!
*Jul 14 10:18:52.446: 00:1f:3c:c2:e9:71 apfMsExpireMobileStation (apf_ms.c:4427) Changing state for mobile 00:1f:3c:c2:e9:71 on AP c4:7d:4f:47:ae:b0 from Associated to Disassociated
I am using remote radius with WLC only.
The strange thing is, when get connected, it looks fine, but I tried disconnect manually, then connect again, it reported cannot get associated, then I try again, it can get connect again,....

An issue with WLC 5508 and 7921 phone

Hello all!
I have a system with WLC 5508 and some 1242 APs. And I use a lot of 7921 phones.
One of 7921 phones was in trouble. It loses registration, disconnect conversations...
I installed the trial WLC and run voice diagnostics.
I saw some of "Potentially degraded QoS in downlink direction because of incorrect packet classification" messages and one "Fair upstream packet loss ratio: 1,2%, which is less than threshold 2.5%"
As I understand all of 7921 phones in these area are affected.
what does it mean? I set up Platinum QoS for voice WLAN. I don't have any qos configuration string for AP and WLC ports on switches...
any ideas?
thanx in advance

Sergey:
There is one application called "WLC Config analyzer". You save your "show run-config" from your WLC in a text file and import it by this application. it will analyze the file for you and tell you what recommendations for voice are missing so you improve them.
When importing a config file you choose what voice clinets you are using, so you need to choose cisco 7921 to it tells you what config improvemetns is needed based on 7921 needs.
Here is the link to download the application:
https://supportforums.cisco.com/docs/DOC-1373
download the latest versoin.
BTW, how many voice/data clients are connected to one AP in that area? if I remember correctly if you are utilizing voice then the max number of clients connected to one AP should not exceed 17. If you have more than this number per AP try to minimize the number of users concurrently connected to the AP then try again.
Hope you'll find the config analyzer useful.
If useful please don't forget to rate.
Amjad

WLC 5508 - AP's are conecting with WLC but unable to regester with WLC

Hi,
I have old 4400 series wlc and recently I have configured 5508 wlc and 6 new Access Point.
when you go to MONITER - AP Join their it shows connected AP detail with AP IP address but if u see it in under WIRELESS Option their is not showing any AP's detail.
I mean to say that AP's are connecting with WLC and also getting IP address but unable to regester with WLC.
Even I have checked with remove Radius configuration also from wlc as well as from acs.
please suggest......

Im not able to post info it says below msg, plesse suggest how i can provide detail.
This message can not be displayed due to its content. Please use the contact us link with any questions.
Also I like to say that after factory rest 4 out of 6 is done now 2 remain.

Win 2008 R2 radius integration with WLC 5508

Requires help in integrating Win 2008 R2 Radius server with WLC 5508

Step by Step instructions - NPS & Wireless LAN Controller
PEAP Authentication - http://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/115988-nps-wlc-config-000.html
EAP-TLS
https://kb.meraki.com/knowledge_base/radius-creating-a-policy-in-nps-to-support-eap-tls-authentication
hope that helps, Please let me know if you have any other questions in regards to setting up your NPS server
Please rate that post if it answers your question or helps you to resolve the problem.

AP 1310 with WLC 5508

Hi,
I have upgraded my WLC 5508 from 7.0 to 7.4 and the AP 1310 no longer can associate to WLC.
Seems that the AP doesn't work with WLC ver 7.4
Except changing these APs to autonomous mode, any other alternatives?
Besides, if we change them to autonomous mode, can Prime Infrastructure manage/monitor these APs?
thanks.

The 1310 last support is on v7.0.x of the WLC. See the matrix below.
http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html
Prime Infrastructure can monitor the Autonomous access point but will not do anything else than monitor. Config changes is done via the bridge/AP itself.
Sent from Cisco Technical Support iPhone App

Help required with WLC software upgrade

I have a customer with WLC 4402 in use, running software version 7.0.98.0, and supporting 11 APs at present. The customer wants to enlarge the WLAN, which involves increasing the number of APs. I have purchased a new WLC5508, and have installed it onto the network alongside the 4402. the 5508 is running software version 7.0.116.0. Because the wireless network is critical to the user, we want to move the APs over to the new controller while the network is up and running, then remove the 4402.
However, when we set the 5508 as the master controller, or tell one of the APs to use the 5508 as its primary controller, the AP connects to the new controller, downloads the new software version, attempts to load it but reports an error with the unzipped file size of the software and fails to boot. formatting the flash on the AP, then disconnecting the 5508 from the network and rebooting the AP allows it to connect to the 4402, it downloads the older software and boots as normal. A new AP, if connected to the 5508 in a test scenario (ie no 4402) connects, downloads and boots perfectly.
I have the upgrade software to allow the 4402 to be upgraded to 7.0.116.0, but I am concerned that, if this is installed, the existing APs will then fail to boot from the 4402 or the 5508.
all APs are 3502s, running IOS version 12.04(23c)JA when connected to the 4402 and 12.04(23c)JA2 on the 5508.
Any suggestions would be gratefully received
Thanks

Hi Pat,
thanks for the reply. I am off site until the morning, but will attach the colsole output tomorrow.
Your mentioning a corrupt image makes me wonder - we had a lot of trouble setting up the initial config on the new WLC, getting a lot of launch failures. Eventually things seemed to settle down (it certainly booted successfully first time this morning) and getting an AP to connect without a problem made me hope it was just a quirk of the configuration wizard, but I think I will try a reboot of the WLC before I do anything else, just to check it is stable.
If it is a corrupt image it may take a little while to sort, as we have not as yet got a support contract on the 5508 - the plan was to upgrade the existing contract on the 4402 once they were swapped out, but I'll let you know whats going on
Rob

WLC 2106_AP-1131_dell vostro 14 v3446 wifi not working with WLC

Hi,
I'm facing issue with newly purchased Dell laptops(dell vostro 14 v3446) are not able to join in WLC.
I have check WLAN profile for these laptops ,all mapped correct,but laptops not able to join the same profile.
Only one(newly purchased) laptop is working fine with WLC profile,remaining laptop all config is same but not getting connected with WLC.
Laptop wifi is working with another vendor APs.
But this particular profile working with my exciting user's laptop perfectly.
WLC/-AIR-WLC2106-K9-Firmware version—6.0.199.4
AP-AIR-LAP1131AG-A-K9.
Please advice me here to resolve this problem.
regards,vijesh
This was posted in lieu of blog https://supportforums.cisco.com/node/12292096 which was deleted since questions should be questions as discussions as not as blogs ;-)

Hi Leo,
Thanks for your response.
Client laptop trying to connect the SSID and once authentication key entered ,it will try for a while then error message come "could not connect...."
As our suggested,i will create new profile with open authentication,then try to connect the laptop.
we have planned to upgrade WLC firmware in coming weekend.

Trouble using Oracle with WLCS

Hi,
I am trying to use Oracle 8.1.7 with WLCS 3.5 on Linux.
I am getting the error:
java.sql.SQLException: System.loadLibrary threw java.lang.UnsatisfiedLinkError
with the message 'no weblogicoci37 in java.library.path'.
Any help?
Thanks,
- Sougata

if you still want to use the OCI driver, make sure the library in your error
message is in the LD_LIBRARY_PATH,
otherwise, switch to the thin driver from Oracle and it will work without
any libraries
Filip
~
Namaste - I bow to the divine in you
~
Filip Hanik
Software Architect
[email protected]
www.filip.net
"Sougata Mukherjea" <[email protected]> wrote in message
news:3baa34b8$[email protected]..
>
Hi,
I am trying to use Oracle 8.1.7 with WLCS 3.5 on Linux.
I am getting the error:
java.sql.SQLException: System.loadLibrary threwjava.lang.UnsatisfiedLinkError
with the message 'no weblogicoci37 in java.library.path'.
Any help?
Thanks,
- Sougata

Mesh with WLC (7.0.220)

Similar Messages

Maybe you are looking for